Standard Infoset base Attribute list cretion.
Hi Experts,
I am facing an issue in EHP1 while creating an infoset data source base marketing attribute selection for country or any other standard field for infoset (CRM_MKTTG_BP_ADDR). The values are available while using CR7.0 and can be further use for segmentation but i am unable to get the values for country key, region or other infoset base standard fields while creating an attribute list after creation of data source. Please provide your expert opinion to solve the issue.
Thanks in advance,
Karan
Hi Anup,
I tried creating filters in Data source level itself but when i press F4 nothing popped up EHP1 but in CR7.0 it do exist that's what my concern is why its not available in EHP1. Any other in particular you want to share will be great help.
Thanks,
Karan
Similar Messages
-
7.0 Segmentation: Datasource, Attribute List using InfoSets.
Hello All,
Issue: Target group based on attribute List built based on an InfoSet datasource not being populated in Classical Segmentation.
Steps:
1. Created InfoSet using table joins- BUT000, BUT020, ADRC, CRMM_BUT_FRG0041, CRMM_BUT_FRG0100.
2. Created Datasource based on InfoSet
- RFC Destination: CRM
- Infoset selected
Details
- Business Partner (BUT000-PARTNER_GUID)
- BP Category (BUT000-PARTNER_GUID)
(All other fields left blank)
3. Created Attribute List based on Datasource
4. Logged in CRM Web UI using Marketing Professional role
5. Created Profile Set -> Profile -> Create filter on Attribute List. Search returns zero results.
Created Query based on Infoset returns results as expected.
Any suggestions would be great? All above tables are standard with standard fileds. I do not think this will need any function module for conversion to be specified in creation of Datasource unless I am missing something.
Thank you,
DeepakHi Deepak,
I get a feel that since even the basic attribute lists are not working and you are not able to create target group, it looks like you are not creating the attribute lists in the right way.
To understand the issue which you are getting, i also tried creating infoset based on the table CRM_MKTTG_BP_CENTRAL.
Then i created data source based on this infoset.
Then i tried creating an attribute list based on the above infoset. And here i get the below error which shows that you are not choosing the right Field while creating the Data source. Did you also got the same error ??
Enter a conversion module
Message no. CRM_MKTTG_DS_MISC037
Diagnosis
The business partner field BUT000-TYPE of InfoSet CRM_MKTTG_BP_CENTRAL does not return the business partner GUID. The Segment Builder therefore cannot generate a target group from this data source.
Procedure
In the business partner field for data source CRM_MKTTG_BP_CENTRAL, enter a field which returns the business partner GUID. Alternatively, specify a function module capable of converting the content of the field specified into a GUID.
After seeing the above error, you might have understood by now that you need a select such type of field which returns the business partner GUID.
Try using the field "BUT000-PARTNER_GUID" in the Filed "Business partner" in the Details assigment block while creating the Data Source. This time the Data source gets created properly without any error.
Now try to create target group based on some filter criteria set in this Attribute list. Make sure you have the relevant data. For simplicity try to create filter on the attribute "country".
rgrds,
Randhir -
Standard infosets missing in CRM
In owr CRM box. we are not getting the standard infosets while creating the data source.
How to get those infosets.
Any inputs will be help full.
Regards
Rajiv SharmaHi,
did you create them as data sources in transaction CRMD_MKTDS? Only the data sources that are created there appear in the list of assignable data sources for an attribute list.
hope that helps
--klaus -
Graphical Modeler, Attribute list filter
Hello experts,
I am working on CRM 6.0.
In the Web UI, when trying to perform a segmentation I need to create some filters on attribute lists.
To do so, I assign value(s) to my filter by using the "match code" or "value help" (do not know what is the proper name).
However, the message "No predefined filter values are available" is displayed sometimes. The system can also display a list of values which are limited to 500 max, though.
My question : Is it possible to display all the possible values for the filter or at least increase the limitation?
My second question why the message "No predefined filter values are available" is shown when the system should propose the available values for the filter?
I would welcome any hints, thank you in advance.
Regards.Hi,
In response to your second question: While assigning data sources to attribute list(when creating attributes/attribute list), you will see technical name beside description in the pop-up, that technical name corresponds to a field in a table or a data element. if the field in the table or the data element has value help, then you will get value help while creating filters. If the value help is not available at the field level/data element level, you will not get any value help for that attribute.
For the first question most of the standard sap value help provides 500 entris to the max. i will check n let you know if it can be increased in this scenario.
Thanks,
Priyanka -
Changing standard or Custom attributes
After I upgraded to 7.4.00070 yesterday, today I’m not able
to modify the “standard or Custom attributes” I stopped all scan activate but
still I am not able to make any changes. Has anyone had this problem?
This topic first appeared in the Spiceworks CommunityHi Raj,
The main difference is seen by the workflow number.
Standard workflows start with numbers like 1,2 etc...
e.g: WS14000002
Custom workflows start with the prefix set by the basis team in SWU3 configuration.
The prefixs generally start with 8 or 9, so any worklfow starting with WS8 or WS9 would be a custom workflow.
eg: WS95100010
Hope this helps!
Regards,
Saumya -
In PCUI - Not able to select Attribute list in segment builder
Hi experts,
I have CRM 5.0 PCUI, It is not showing the frame which I can choose Attributes list in order to create profile groups and target groups for Segmentation
I'm looking for something similar as tcode: CRMD_MKTSEG in SAP GUI.
I have already assigned Marketing Manager/Assistant in my profile.
Am I forget anything ?
regards,Hi ahm,
Kindly assign the CRMD_MKTSEG role from GUI to u r User and for portal assign standard iview of Segment Builder and u'll see the tab Segment bulider in u r PCUi screen, u can create Attributes list, profile groups and target groups for Segmentation.
Hope it'll help u .
Thanks,
Dipesh. -
Target group from filter criteria of an attribute list.
I have created an Attribute list in the T-code CRMD_MKTDS and a filter criteria for this attribute list.
Now, I would like to use this filter criteria to create a Target Group.
So, is there any Function Module, standard Report program or methods of any standard class to create a target group using this filter criteria ?
How can I determine the BPs related to the filter criteria and assign them to a Target Group?Hi,
You can use class 'CL_CRM_MKTTG_GENIL_TG' or Function module ''CRM_MKTTG_TG_READ'
to create Target group's from Profiles.
Hope this helps.
Regards,
Anup -
Hi all,
I have a requirement regarding Filters in Attribute Lists.
We want to provide an Attribute List in english. But Data Sources and marketing attributes are only displayed in German. Even if the Filter is a Standard SAP-Field like City or Country. The Attributes are translated. I would have the option to translate it manually by the description but it is to much and has to be done for every new Attribute List.
Does anybody know how to get the translation?
Thanks
CorneliaHi
Even after making the attributes as nav attribute in Master data they ought to be marked as navigation attribute on the infoprovider on which you are creating the report.
If the report is based on the cube that uses company code then you need to check it as navigational att in the cube and incase you have a multiprovider at the top of the cube then you again need to check this attribute as navigational in the multiprovider too.
Thus by making comp_code_zregion as nav att in the master data you will not see it in the report you need to make it as nav in the report as well as multiprovider incase the report is based on multiprovider
Thanks
Puneet -
Attribute List Creation : campaign vs campaign execution
Hi all,
When creating an attribute list in GUI, what do the usage IDs "campaign" and "campaign execution" mean ?
What do they enable or condition ?
Thanks in advance,
EliHi Eli,
There are several usage categories defined in the system, the most important ones are "Campaign Execution" and "High Volume Segmentation". The term "campaign" means that the target groups are built using the low volume segmentation engine to be executed in a campaign. You can define usages for each usage category in the system. The usage category defines for what purpose the segmentation element is used and with the usage you can define authorizations on the element.
"campaign" is the SAP deliverd standard usage for classic segmentation (usage category "Campaign Execution").
If you want to use the high volume segmentation engine, you will have to use usages of usage category High Volume Segmentation or High Volume Segmentation (BW). The latter one is available with CRM 7.0 EhP2.
hope that helps
--klaus -
Data type of the base attribute or the base value does not match...
...the assigned expression.
Hello all,
I always get the Error
+<ERROR+
TEXT="'DWH.CUB_REGISTRATIONS_AW.REGISTRATIONS': XOQ-02517: Der Datentyp des Basisattributs oder der Basisgröße stimmt nicht mit dem zugeordneten Ausdruck überein.
XOQ-01400: Ungültige Metadatenobjekte"/>
The English message must be something like this:
The data type of the base attribute or the base value does not match the assigned expression.
when I run my mapping. The attribute REGISTRATIONS is NUMERIC (12,2) in the Cube and I map a NUMERIC(12,2) constant in it.
I use a simple OWB-Mapping for loading, but I don't understand why it doesn't function. Other mappings where the attributes are out of a
table I put in a cube are running well.
I tried different things, but nothing fixed my problem. Any idea ?
Thanks a lot for help
MichaelTechnically this is a 'warning' from the server, not an 'error'. This means that the change you made should have been submitted, but you get an warning message on the client. AWM would suppress this warning, but evidently OWB does not. Can you switch to use AWM?
Here is the definition of the warning along with 'cause' and 'action' sections. (Unfortunately these sections are not translated into German for some reason.)
>
02517, 0, "The data type \"%(1)s\" of the base attribute or base measure is different from the mapped expression \"%(2)s\"."
// *Cause: Either the base attribute or base measure with the mapped expression was set to an inconsistent data type, or it was mapped to an expression of a different data type from its fixed data type.
// *Action: When changing a mapped expression for a base attribute or base measure, ensure that the expression has the same data type; otherwise, set the data type of the base attribute or base measure to NULL first. When a base attribute or a base measure has an existing mapped expression, do not set it to a different data type.
>
It is probably safe to ignore this warning, but if you can post the relevant XML for the cube, then will probably be able to spot the problem. I assume that REGISTRATIONS is a measure in the cube CUB_REGISTRATIONS_AW, so this is what you can look for in the XML:
(1) The definition of the base measure along with the datatype. It should be something like this
<Measure>
<BaseMeasure
SQLDataType="NUMBER(12,2)"
ETMeasureColumnName="REGISTRATIONS"
Name="REGISTRATIONS">(2) The mapping info for the measure, which should looks something like this:
<MeasureMap
Name="REGISTRATIONS"
Expression="...">
<Measure Name="REGISTRATIONS"/>
</MeasureMap>I don't know if you can get the XML directly from OWB. If not, then DBMS_CUBE.EXPORT_XML should work (assuming you are in 11.2). You could also attach AWM and save the cube to an XML template. -
Printing Standard Text in Task List via IA17
We currently use a lot of standard text in task list. However when I run IA17 to display and print a task list, the standard text does not display as the actual text, only the standard text include is displayed.
Is there a way to get the actual text from the standard text to display as well?Okay, I know I keep answering my own questions, but every answer leads to a new question.
What I've discovered is that if the include statement for the standard text is not in all caps, then it does not print in IA17
For example, we had the include as: Include Z0000438 OBJECT TEXT ID IPRT
However it would appear that the statement needs to be like this: INCLUDE Z0000438 OBJECT TEXT ID IPRT
Has any one else experienced this?
Edited by: Darrell Dorsey on Sep 23, 2010 3:19 PM -
Add_item : Attributes list collection sort order
Hello:
I created multiple custom attributes and added them to my custom item type. I need to apply these attributes while adding an item programmatically.
1) How do i define the order of the Attributes list via the Portal builder so as to match the corresponding values read from a list/table,etc. ?
2) The ordering arrow buttons in the attribute list of my custom item type does not match the result set from my query. I tried all options of "order by" clause. Here is the query - (componenttype is the name of my custom item type)
select iatts.ID
,atts.caid
,atts.DATA_TYPE
,atts.CAID
,atts.NAME,atts.DISPLAY_NAME
,iatts.ITEM_TYPE_ID
from wwsbr_item_types itypes
,wwsbr_item_type_attributes iatts
,wwsbr_attributes atts
where --itypes.caid = 133
itypes.name like 'ComponentType'
and itypes.ID = iatts.ITEM_TYPE_ID
and iatts.ATTRIBUTE_ID = atts.ID
--and atts.CAID = 133
order by atts.id
3) I need to expect a certain order of the attribute ids, when bulk collecting into the attributes array, in order to populate the values collection in the same. So, how do I determine the order of the attributes ids ?
4) Is there a better way to do this ?
Thank You.
regards
AnanthDocument Sets are great tools for grouping multiple documents together. However, if every set has exactly one document, it would be better to just upload the file and not place it within a Document Set:
Uploading documents using object model - http://msdn.microsoft.com/en-us/library/office/ms454491(v=office.14).aspx
Uploading documents using web services -
http://cecildt.blogspot.com/2010/10/upload-documents-to-sharepoint-2010.html
If you have requirements to use Document Sets, keep in mind that this adds a layer of complexity beyond a simple Document Library. Behind the scenes, each Document Set is treated as a separate folder, and although can you query items within it, there might
be extra steps for getting the sort order to ignore the folder structure. Can you try setting the Scope to be "Recursive" and also specify that you are looking only for files and not folders:
<Eq><FieldRef Name='FSObjType'/><Value Type='Lookup'>1</Value></Eq></Where>
Dimitri Ayrapetov (MCSE: SharePoint) -
Maintaining attributes, data source and attribute list in web UI
Hi
Can we maintain attributes, data source and attribute list in web UI level. We can do it in SAP GUI level but do we have the option of doing it on web UI level??
Regards
AakshiHI
data sources and Attribute lists need to be maintained in GUI but these can further be used for Segmentation in Web UI using the Graphical Modeler.
hey main thing is that when we design all the things our out put is reflected in both interface & most important thing is that 90% of our customization done in gui.only web_ui related customization done in web_ui.
for more details revert me back
debi prasad -
Maintaining attributes, data source and attribute list in web UI level.
Hi
Can we maintain attributes, data source and attribute list in web UI level. We can do it in SAP GUI level but do we have the option of doing it on web UI level??
Regards
AakshiHi Aakshi,
As far as I know,data sources and Attribute lists need to be maintained in GUI but these can further be used for Segmentation in Web UI using the Graphical Modeler.
If you need more assistance please do revert.
Regards
Varun Taneja -
Data source and attribute list transport
Hello gurus!
How can we transport data source and attribute list to another system?
In IMG system writes "Transport is not required".
Best regards,
Artur Litvinov.Hi Artur
Attribute sets can be transfered thorugh RFC connection. Create the RFC of the source system in target system, then import the Attribute sets using the option "Transfer of Attribute Sets from Other System " tcode CRMD_MKT_TOOLS - Expert Tools.
Hope this will help
Rgds
Mallikarjun
Maybe you are looking for
-
With ipad2 I have been almost successful in moving photos from the stream or roll to separate albums. It takes the commands but does not allow last step. What am I missing?
-
When I send an email, it duplicates the content in same email?
I am having a problem that is brand new. When I send an email, the recipient is receiving the same content twice in the same email. How can I fix this?
-
Why use layer masks and adjustment layers?
I've been using PSE and CS successfully for years. One thing I have never understood is: why use layer masks and adjustment layers, instead of simply creating a copy of the subject layer (the one I want to make changes to) and experimenting with that
-
MAS shortcut missing after installation
Hi All, On our Mobile development workbench, we don't see any shortcut for MAS. However, there are shortcuts to MSA, AMT, and MSY. We have following questions: How can we find out that the MAS is installed properly or not? If MAS is installed proper
-
Create target directory ?
How to create target directory in a receiver File adapter ? Is this option in the file systm access parameters or processing parameters of the file adapter ? i didnt see a box that says create target directory in either. Please help me with this issu