Standard MSS reports
Hi
Can any one Please guide me How to Install the Standard MSS report in the ECC system.
as of now my customer says to install only the standard reports.
Would really appreciate if you can please help giving the list of reports and also how do i go forward to install those standard reports .
please can any one update me on this
Regards
Santosh
Edited by: Santhosh Nagaraj on Oct 20, 2011 7:10 PM
Swetha,
check this link to remove reports from launchpad
https://forums.sdn.sap.com/click.jspa?searchID=18309827&messageID=6017207
Thanks
Bala Duvvuri
Similar Messages
-
Bypass P_orgin auth check for standard MSS reporting
Hi SAPers,
on my HR system, I have 2 types of users : ESS/MSS users (via portal) and backend users (via sapgui).
ESS/MSS role does not contain any P_ORGIN authorization because it should be added to their authorizations if they are also backend users.
The problem is coming from standard MSS reports : the "time statement overview" among other report needs P_ORGIN (IT 0, 1, 2, 7, 8, ...) !
Is there a way to bypass the standard authorization check for MSS reports ?
Thanks in advance,
Olivier.>
Olivier TACA wrote:
> Example :
>
> Portal Role for ESS user contains P_ORGIN for IT 0006 (Address)
>
> Backend Role for backend user contains P_ORGIN for IT 0002 (Personal data) ... and S_TCODE for PA30 of course.
>
> The backend user, who is also an ESS user, can manage IT 0006, which is not foreseen in the backend role.
>
> I use P_PERNR for the portal role to manage access to infotype.
I see two issues here:
1. ESS is NOT setup correctly.
- You don't need P_ORGIN for ESS. You only need P_PERNR. The trace might even show an error looking for P_ORGIN but you do not need it. This is an example of a role I have using ESS services for addresses. I don't have P_ORGIN, P_ORGINCON or P_ORIGXXCON. Do NOT use PA30, for ESS, that is very dangerous. The ESS services can be added to a role and should be use for ESS.
Here is an example of what I have:
Manually HR: Master Data - Personnel Number Check P_PERNR
Manually Address Change - Permanent and Emergency
Authorization level D, E, M, S, W AUTHC
Infotype 0006 INFTY
Interpretation of assigned per I PSIGN
Subtype * SUBTY
2. MSS - I can't find the service for the report you are looking for. If you provide the MSS service I can run some traces and probably help you isolate your problem. Example of an MSS service (sap.com/mss~pla/PlanningPrimaryCosts).
I hope I didn't sound too harsh; I am just trying to help.
Regards,
-John N.
Edited by: John Navarro on Aug 5, 2008 5:46 PM -
Standard MSS Reporting scenario Country dependent
Hi everybody,
We are setting the standard MSS scenario for reporting in SAP Portal but we are facing a question:
- We have a common list of reports in R3 for all the countries.
- We have some specific reports in R3 for each country.
How could we display in the standard Reporting iView the different list of reports dependind of the country?
Thanks in advance,
Jesús.Hi Jesús,
Please check below links you might get some help.
HCM and Global Employment
[Global employement in ESS |;
Regards,
Piyush -
Entry Date 00.00.0000 in MSS reports
Hi Expert,
When i try to execute standard mss reports, for ex Entries/Leaving Date, or service anniversaries the entry field is 00.00.0000. But if i execute the report via gui (Manager desktop) then the entry field would filled by correct value. Can somebody help me ? Thanks in advance.
Best Regards.
Hendriyou need to maintain the feature and on how the reports are run
You need to implement the note 562031 instructions in the system as this is not part of standard delivery, Please apply it
and verify in your test system it will work
ie
Currently, the system operates as follows: The modules for the
determination of the respective date (HR_ENTRY_DATE and HR_LEAVING_DATE)
are called up with the key date and not with the start and end date of
the personnel action within which the key date exists. If HR_ENTRY_DATE
doesn't find an entry date on given key date it returns 00.00.0000. This
is an expected system behaviour.
Sometimes this system response is partially not desired, instead, you
want the system to determine the entry date and the date of leaving with
the start and end date of the personnel action within which the key date
exists during a key date selection. Therefore, the attached note 562031
was released. If you would like to change the system operation implement
the note 562031 accordingly.
Additionaly, take into consideration, that you could use a key date
selection at Person Selection Period (instead of Data Selection Period).
This could likely be helpful in your case. Consider different selectioncriteria -
Error in MSS Report (Using MSS Reporting Launch Pad)
Hello,
I'm currently using the convert manager's desktop data to MSS report launch pad for the portal.
When trying to run the report in MSS, I'm getting the error below:
"Error in Manager Self Service. When calling the report, the following error occured. Error when executing query Z_ABCD." This is from an SAP Query report and I could not determine what caused this error.
Have anyone encounter this and if you are able to resolve it?
Any information would be greatly appreciated.
Thank you,
Tam Ly
County of Sacramentohi,
Go to transaction RSCUSTV27 and check if any standard template is maintained.
Use
In this activity you can make the following settings (for systems with a Release higher than SAP BW 3.x):
You can set your own Web template as the standard Web template for ad hoc analysis.
You can set your own Web template as a standard Web template for BEx Broadcasting.
You can set a Web template that is used during BEx Broadcasting for queries for generating documents.
You can specify a Web template that is used during BEx Broadcasting for enterprise reports.
You can set your own Web template as a standard Web template for reports.
Standard settings
The delivered standard Web template (0ANALYSIS_PATTERN) is used for ad hoc analysis.
The delivered standard Web template 0BROADCASTING_TEMPLATE is used for BEx Broadcasting.
The delivered standard Web template 0QUERY_TEMPLATE_BROADCASTING70 is used for broadcasting queries.
The delivered standard Web template 0REPORT_TEMPLATE_BROADCASTING is used for broadcasting reports.
The delivered standard Web template 0REPORT_DEFAULT_TEMPLATE is used for executing enterprise reports.
Activities
To set your own Web template as a standard Web template for ad-hoc analysis, enter the technical name of the Web template under Ad-hoc Analysis. If you do not specify anything, the delivered standard Web template (0ANALYSIS_PATTERN) will be used for ad-hoc analysis.
To set your own Web template as a standard Web template for BEx Broadcasting, enter the technical name of the Web templates under Broadcasting.
To set your own Web template as a standard Web template for BEx Broadcasting for queries for the generation of documents, enter the technical name of the Web templates under Query Precalculation.
To set your own Web template as a standard Web template for reports, enter the technical name of the Web template under Enterpr. Reports.
Note that if you change settings, you have to restart the J2EE Engine before the changes become effective.
Regards,
Kams -
No data found in MSS Reports.
Hi All,
I've configured the MSS business package in my EP.I've done all the required configuration to get it work.But in all my MSS reports it is showing "NO DATA FOUND".Even the employee search is showing the same message whereas in ESS the employee search and other views are showing proper data.
Can anyone suggest what could be the issue?
Your efforts would be rewarded.
Regards.hi,
MSS now use Launchpad for reporting which u need to configure from the backend system.
You need to customise the Launchpad reportfrom the backend uding t-code FPB_LP_MSS_REP_CUST. this t-code will initialise ure Launchpad report. Check that table FPB_LP6_SNI is no
longer empty, and has the required entry. Then run the transaction to
convert.
Manually add the line to table FPB_LP6_SNI. The values are role = 'MSS', instance = 'REP', and sni_used = ' ' (blank). Then run the transaction to convert.
Also try to run run program #PWPC_CONV_MDT_TO_LPA# with type #RPT0#.
If you want only MDT report's...i.e only HR report..you can include Reporting iView from SAP provided content folder...this is standard iView which will display Manager Desktop.
Thnaks and Regards,
Jigar OZa -
SSO for MSS Reporting doesn't work
Hello Experts!
I've a litte Problem: When a Portal-User (Manager) wants to call a Report from MSS Reporting, there comes a litte popup where he has to fill in his logon data for the HCM-System (target system).
I have already imported the certificates from Portal into the target system (Transaction strustsso2) as describes in this weblog (Connecting SAP systems to Enterprise portal with SSO.). The portal user and HCM-System user names are indentical, too.
do you have any suggestions?Hi Matthias,
Let me know which version of MSS and HCM system are you using. I assume that your you are using saplogonticket in the system property.
Few questions:
- Is that appearing for all the screens or applications in MSS business package ?
- Are you using the standard SAP business package or have you customized it ?
- As mentioned in your message, you have imported the certificates but have you added them to ACL and set the value in 2 parameters login/create_sso2_ticket and login/accept_sso2_ticket and restarted the target system (HCM system) ?
Regards,
Sunil -
Bypassing selection screen in custom reports added to MSS reporting
I have created a custom report (using PNP) in R/3 and added it to the MSS reporting (not Launchpad). Even though the manager is selecting his subordinate employee and clicks report result, he still sees a selection screen which i have defined in the custom report.
When the manager runs a sap standard report RPTABS50, he sees data of the employee only he selects.
How do i bypass the selection screen in the custom ABAP report i have added to the MSS?
Thanks.Has to take an alternate approach. Picked a standard report by SAP and modified to our requirements.
-
Hi All,
I am trying to verify the MSS Reports from the portal side. When I click on the links in the reports (Employee Data -- Birthday List,Age/Gender etc......) I am able to get the selection screen pop up window with Launch Pad Reporting.
When I select the list and clicked on Report Result push Button getting the error as follow.
Reporting IAC
Portal Run Time Error
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 08:34_25/09/10_0011_2097150
Refer to the log file for details about this exception.
I have followed the same steps mentioned in the link
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=199820849 provided by Siddartth Rajora.
Still getting the same problem.
Could any one please help on this.
Regards
KPas i siad you arre not using RPTO scenario which is standard
or converted to LPTA
the issue is caused by the Report category
type. The Reporting Iview in the portal has the Report category type,
by default the report category type is set to "RPT0". Therefore, when
the application is launched, the reporting category type is also sent
as URL parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. There are two ways to handle this
issue, you can either changed the Iview property to "ZMSS" in the portal
, or Therefore the best option would be to change the report category to
"RPT0" in the backend system for all your reports.
check your scenario., read the wiki again as listed steps and spro to chekc this -
We are trying to use the Reporting iview (com.sap.pct.erp.mss.reporting) to display standard reports from ECC, such as Birthday and Gender and Age reports. We have not done any specific config, so we are using the RPT0 scenario to display all the reports. We are able to select a report from the list, we are also able to Define Selection criteria (Select an employee from the list). However, when we click on the last step "Report Result" button, it display an empty screen on a pop up screen. The status is done, but there was nothing on the screen at all, no grid, just gray. The same manager login was able to run the Birthday and Gender/Age report on ECC. Please let me know what need to be done to display the report.
Please how was this Issue resolved. I'm having the same issue. Thanks so very much.
Regards, -
Please kindly help our friend Kishore Talagadadeevi.
Scenario 1:
Step1
iView is using standard mss.rpt webdynpro component.
It is currently pointing to RPT0 scenario and "MSS_RPT_SELECT" as viewgroup.
Select 'Birthdays' report which in turn using SAP standard report
"AQZZ/SAPQUERY/H2BIRTHDAYLIST=="
Step 2
Select the organization unit which has blank positions in it.
Step 3
Click on Report Result, it is showing the following information popup as part of step 3 .
(here there are no issues)
Scenario 2 (here there is an issue, actually it differs from Scenario 1)
We have taken the AQZZ/SAPQUERY/H2BIRTHDAYLIST== report and renamed as ZPPAR_BIRTHDAY_LIST and the report is assigned to same application scenario:RPT0.
*Steps 1 and 2 *
Same as in scenario 1
Step 3
In this scenario, it throws "Selection screen" instead of "information popup" that was thrown in scenario#1.
THAT'S THE ISSUEHi,
In My Staff we have :
Report Selection - This has a portal application based on par file which has a provision to select different reports. The reports which are opened are nothing but IACs. The following are the reports available for selection:
Birthdays Employee data
Education and training Employee data
Family members Employee data
Maternity Employee data
Powers of Attorney Employee data
Service anniversaries Employee data
Vehicle Employee data
Absence quotas Time Management
Absences Time Management
Attendance check
Attendances Time Management
Personal work schedule Time Management
Time leveling Time Management
Attendance bookings Education and training
Budget comparison Education and training
Bookings with history Education and training
Attendance prebookings Education and training
Instructor function Education and training
Attendance cancellations Education and training
Cost centers
So i believe you would like to keep this, correct me if I am wrong.
Headcount - BW Reports
Illness and Overtime - BW Reports
Skills - BW Reports
There are two options available:
Under My Staff Tab, you just want to use the report selection. Am I right ? If that's the case, I would suggest you to create your own iview for the report selection application. You may skip the first screen which gives the other options like headcount, illness & overtime and skills, rather take the user directly to your iview of report selection. Would that be ok for you ?
The second option is to download the par file com.sap.pct.hcm.rpt_reportselection, change ReportSelection.jsp in the component default. This was for My Staff. Similarly for My Budget, you can check in the Portal Content, get the name of the par file and then download and modify it accordingly.
Hope that helps.
Cheers,
Sunil
PS: Reward points for helpful answers. -
Hello all,
We are trying to implement MSS reports. As of now, we are trying to have demo to see what are the capabilites of the system.
ERP 2004
we have the MSS package 60.1.2 and XSS components version 100imported.
After a sucessful login ,
my staff > reporting > report selection
Here we are not able to see any reports in the list.
can anyone guide me to right place where I can figure out how to populate these reports here.
anysettings on R3?
here are the reports we are planning to have on.
are all these on BW or some of them on R/3?
Age/Gender
Birthdays
Education and Training
Family Members
Maternity
Service Anniversaries
Vehicle
Absence Quotas
Absences
Attendance Check
Attendances
Personal Work Schedule
HeadCount
Illness and Overtime
Skills
Thanks,
RajAll these are R/3 reports..
you have to configure settings in Manager Desktop node in SPRO.. that's where we define the reports to be fetched and then you have to link them to you MSS..
by default there are some set of standard reports shown... if you want to add your own reports you have to play around configuration..
check this <a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/3a/3198408d953154e10000000a1550b0/frameset.htm">Configuring MSS reports</a>
Hope this helps,
rgds -
Hi Experts,
This query is regarding MSS reports. Initially we did not want all standard functionalities, so we deleted all iviews, worksets and assignment to roles.
Now we are implementing Report launchpad. I wanted to know if we have to reinstall Business package for MSS...since we have deleted standard functionalities.
Please let me know..
Thanks!Swetha,
Only way you can get all those iviews is transport those iviews from other systems like QA ,Prodif they are already installed on them.
I suggest you create a copy of standard role and work on it
Thanks
Bala Duvvuri -
MSS Reports - Config done but no show on reports selection IView
Hi there,
I configured T77MWBFCH, and T77MWBFCD for the MSS reports.
For some reasons, if I modify a standard existing entry, the change appear in the portal, but if Itry to create a new NODE and REPO, it does not appear in the reports selection IView on the portal.
Any idea?
Thank you!!
GenevieveHi Genevieve,
Can u share with us how u resolve this issue.
Thanks,
Rgds,
Nanie Arianie -
Hi,
For some MSS reports ( Staff Assignments, Position Description, Bonus report, Staff Gains, Staff Losses, Nominal Rolls, TWA Reports) when executed for "Direct Reports" and "All Employees" from the drop down, showing error as " You must select atleast one suitable object before starting the report" although all the employees or atleast one of them is selected. It would be great if anyone can suggest as to what is causing this error?
Thanks,
ToaSwetha,
Only way you can get all those iviews is transport those iviews from other systems like QA ,Prodif they are already installed on them.
I suggest you create a copy of standard role and work on it
Thanks
Bala Duvvuri
Maybe you are looking for
-
HI, Any one have Oracle BPM 11g documentation? Could you pls share the link. Could you pls share the BPM 11g probs & cons. Regards, Anandh P
-
HTML markup in newsfeed when using SocialCommentWebPart
Hi, I have created a brand new publishing site. I have added the SocialCommentWebPart to allow users to add comments on news. I use the default page layouts that ships with SharePoint publishing sites. The only thing I have added to the page layouts
-
Runtime error when download the CE7.1
hi all: When i get the EHP1 for SAP NetWeaver Composition Environment 7.1 - Preview Version from the url:https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/00846edd-355b-2b10-f38c-df94ec96eb74,or other download links, it always prompt th
-
The glass on my iPhone 5 is missing and now my camera won't focus does it have anything to do with the glass missing?! Would buying a iPhone extension lens like the ones you just clip on the phone help?
-
Call AS400 RPILE or CLLE from JAVA pgm
Hi is it possible to call an AS400 RPGILE or CLLE from a Java Pgm. And if so does someone have any example code to do so? Thanks