Standard users of workflow provided by sap

I need to know who r all the standard users of workfow Provided by SAP like (WF-BATCH).where can i find the list of these standard users.Kindly help me in this issue.
Thanks in advance,
Ramesh Kumaar.S

Hi Ramesh,
Your question is not clear. The user names used by workflow is :
WF-ADMIN
WF-BATCH
If no agents are found for a given task the workflow is sent to workflow admin (WF-ADMIN).
All the background tasks/methods are executed by the workflow batch (WF-BATCH) user.
All other users in workflow are the user names who use the SAP system (end users). They are the workflow agents.
Regards,
Raj

Similar Messages

Is there any standard extractor for AFD provided by SAP?

Hi.
We are planning to implement SEM-BCS ? From this forum and SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
I think I missed good integration point SAP provided.
Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
So, there is no standard extractors for AFD.
IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
CoI - the most of data for it is accessible in ECC, even in RFD.
So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

Modifying standard material type configuration provided by SAP

I was recently involved in a discussion regarding whether or not to modify sap provided material types (e.g. FERT)
My position was that SAP provided material type configuration should not be modified, instead a z-version of the standard material type should be copied over to a z-version or a y-version (FERT copied as ZFRT), configurations changes made the z-version. My position was based on the following considerations:-
Reference to the original
Possible implication at the time of future releases or upgrades - In Some of my previous projects this was a reason why the standard material type configurations were never touched
Hence I am curious to know if there a more current or correct position on this topic.

Hi Jose,
You are absolutely correct that standard material type should not be changed as you can always reference to the original if you want to create a new material type by copying the old ones. I too have seen ZFRT and FERT.
I go by creating a Z one, as I have always the option to reference the original Material Type. As the above members have already replied the same.
It is very easy to check the material type like FERT, ROH etc. However, say you have changed the settings for standard material type like FHMI, LEIH, VERP etc and you want to create a new material type by referencing any of the above, you will need to check client 000 (as referred by Jurgen) to check what Pricing control it have S or V. What Item Category is in original. What selection of views are there in original etc. you always have a better edge to check from the originals if you do not change them.

(local) only on Current Server when installed SAP Business One to a Standard User account

Hi. We have a client. Setup of Windows account was like this.
1. Built-in Administrator account is disabled.
2. Primary mandatory user account was made with Administrator rights (e.g. User).
3. Updated Windows 7 Pro 32-bit SP1 and installed all applications except for SAP Business One
4. Created new windows user account with Administrator rights (e.g. Admin)
5. Changed the primary account (e.g. User) from Administrator to a Standard User type
6. During SAP Business One client app installation, image below always notify even UAC was turned-off and installation proceeds without any error.
7. After installation, image below was the result.
8. Made some testing by enabling the built-in Administrator account and re-installed SAP Business One client app and result was the client app works ok with this account.
9. Created new user account with Standard User type and run the SAP client app and result was also ok with this account.
10. Run SAP Business One client app on primary made account (e.g. User-Standard User type) and the the made Administrator account (e.g. Admin) but same (local) only result occurred.
Any ideas Thanks in advance!

Hi,
Please check SAP note:
1583117 - Choose company list is empty in MS Windows Vista,7,2008.
Thanks & Regards,
Nagarajan

Oracle Provider connectivity issues in 2008 server (for Standard Users)

Hi
We're using Windows 2008 R2 server and installed a VB application. The application has the capability to connect to Access, SQL Server or Oracle Datbase using OLEDB providers. When I login as "Administrator", the application connects to all three databases.
But, When I login as "Standard user" in the server and try to connect to the Oracle Database (using Oracle OLEDB provider), the application errors "Database server doesn't exist or Access denied".
We are using Oracle 10g (oraops10.dll, version 1.102.2.20) client. We have also provided the full access rights to "Authenticated Users" and "Users" account in the server and still get this error.
Any suggestions/ideas, why this error occurs?

I don't think, you're correct.
As mentioned in my post, the application works fine when I logged as "Administrator". Only for the "Standard users" logins, the application doesn't work.
The Windows Server restricts the oracle database connectivity for the standard users. My questions, does oracle require "special permission" for certain folders, so the standard users can connect to the oracle database.?
Regards, Karthik

Custom workflow integrated into SAP Standard

I have a requirement were the business would like a workflow to create material master, but prior to actually creating the material they have a form that needs passed around and approved my many business units. Once all approvals are obtained a material master can be created. What I would like is to create a custom BOR and event to route the form and get approvals, but I would like to some how carry over or link this custom workflow with the SAP standard for material master so you can view the log of who and what was approved for this material. Any suggestions?

Hi,
Create a workflow or copy the SAP standard. Insert a fork step with the number for branches corresponding to the number of approvals you need. Say you need 5 approvals, have 5 branches and 5 required for completion.
In each branch use a Form step or a custom method to get the approval.
After the fork has completed then insert your step which call the CREATE method for your material.
Everything will be contained in the workflow log.
Regards,
Eddie

Url link in User Decision workflow step

Hi Experts,
I had created a workflow for "Employee transfer" process using SWDD tcode.
I had a created a workflow step with type as "User Decision".I had included "Approve" & "Reject" decision options.
Now i want to include URL link along with "Approve" & "Reject" in the user decision workflow step (i.e) The manager needs to see the URL link along with "Approve" & "Reject" in his SAP workflow inbox.
Can anyone guide me...
Regards,
Krishna Balaji T

Hi Krishna,
I understand your issue. I have faced a similar issue in my project.
Here is the solution!
To add link of a URL you need to have the binding with the BO of the transaction your are refering to. To do this, you need to bind your BO event (triggering event) to the workflow container and then the workflow container to task container. This BO value should flow from event-> workflow -> task container to get the link in the User Decision.
To do the binding you need to follow the following steps:
1. Go to t-code SWDD and open your workflow template.
2. Go to Basic Data (cap sign button at the top of the screen) or click Ctrl + F8
3. Go to Start Events tab.
4. In the Object type enter your BO name (BO for the transaction you need to add as link), in Event of object enter the BO event. This would serve as the triggering event for your workflow.
5. Click on 'B' i.e. Binding Defined, click on generate automatic binding. It would automatically generate the appropriate binding for the workflow. You can also alter the binding as per requirement. This binding would ensure that the URL comes under 'objects and attachments' section.
6. Click on 'C' i.e. Start Condition. A dialog would open, select the appropriate start condition for the workflow. Check the condition before saving (recommended).
6. Click on 'A' to Activate the binding and start condition. All 'A', 'B' and 'C' would get green.
7. Save the changes made and activate your workflow.
8. Do the binding between the workflow and the user decision step. Select automatic binding (recommended).
You can also refer to the similar thread that I had provided solution to. This would help you resolve the issue!
Re: URL of site has to be attached along with the mail
Hope this helps!
Regards,
Saumya

Personalize Link and Standard User / End User Core Role

Hi Expert,
Need your help in customizing service that appear when
Personalize hyperlink click on Portal Right hand side.
I understand the Personalize hyperlink
appearing from Standard User Role or End User Core Role.
I have copied End User Core Role and changed the ID,
after that have removed all workset apart from User profile
and assigned the new edited role to my user ID and it working fine.
My Query is can any one please let me know,
1. How is the new End User Core Role working? Where are the details property /or any other settings
with respect to use the End User Core Role done,
as the Personalize hyperlink appears when End User Core Role assigned to user?
3. What are the configurations or any other changes that I have
to do, if I need some other XYZ role to appear as a hyperlink like Personalize hyperlink appearing when End User Core Role is assigned?
4. What are the steps / Process, if I have to remove all the tabs except General Information tab under User profile iView { Without using (CTRL + Right mouse click)}.
5. If the pages at {portal_content/com.sap.pct/every_user/general/pages}
are been used how are they used?
Similarly
If the iViews at
are been used how are they used? and If not whatu2019s its purpose?
Currently I am on Portal Version 7.0 SP 13.
Thanks in advance for all your time and comments.
Cheers,
SJ

Hi Eric,
you can add the Personalize iView to the page or end user role you created.
to add the personalize iView to your role navigate to
Content Provided by SAP - Admin Interfaces - Admin iView Templates - you can find different iViews related to Personalize.
add the iView you want the end users to change.
This is the simpler way.
Hope this helps.
Cheers-
Pramod
reward points if helpful.

How we can acess GOS to pop up automatically to user from workflow is our a

we plan to implement invoice verification workflow to start when an invoice is scanned and placed in holder in OAWD. So that workflow will start from then onwards with SAP archive link.
Please let us know how we can link scanner and SAP Archive link so that we can place the scanned document directly in to OAWD. how we open the image automatically when approver or AP clerk execute the workitem.
The process we want to follow is
1. Scan document and place in OAWD
2 Workflow is started based on the document type of Archive link( we want to use BKPF)
3 AP clerk receives workitem and execute it. APclerk see the transaction code FV60 to enter document and image of the scan automatically
4 AP clerk fill the document and park the document.
5 Workitem is sent to approver based on the rule specified
6 Approver execute the transaction invoice iamge is opened and sap document is displayed.
7 Approver check both image and sap docuemnt and take decision
8 Approver approves document , sap document is posted and ready for payment
9 If rejected go back to AP clerk.
Here issue is when user or approver execute the workitem ,how we can open image automatically along with sap screen.
or how we can acess GOS to pop up automatically to user from workflow is our another isssue

Hi,
It is possible to launch the stored image as soon as workitem is executed. You will need to maintain the archivelink customization to display stored document. Check the following link
[Displaying Stored Document|http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/993685446d11d189700000e8322d00/content.htm]
Hope this helps
Cheers!!!
Samanjay

Running under a standard user in windows 7

We just bought Photoshop Elements 13 and when the user tries to run the program it run really slow and freezes quite a bit. This user is a standard user in Windows 7 no Administrative rights. If you right-click the icon and choose Run As Administrator it then runs like it is intended to. We don't allow our users to run as Admin so I need a fix for this. The only other thing I am wondering is that the computer is in a Active Directory Domain environment and we push our Group Policies to our systems. One of the policies redirects the users folders to a server share so the My Documents, My Photos, etc. are actually on the server drive not the local drive. Is that part of the problem?
Any insight would be awesome!
Thanks,
-Scott

I agree with Erland.
SQL Service account is used while performing any OS level operation by SQL Server process (sqlservr.exe). On the other hand, the account which is connecting to SQL Server will have it's own permission in Server/Database provided via Logins/Users.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Flash Player does not work with Standard User, but will work when browser is "Run as Administrator"

I don't understand why this is happening, but Flash Player will not work when a Standard User is using the browser. It will only work when the browser is run as an administrator. Any way to fix this? I've tried to uninstall, and reinstall the player, and it still wouldn't work.
The user is on Windows 7, 64-bit. Using IE 10.
Flash not working for Standard User - YouTube

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Best practice standard User Acess Test for WIN2012 AD

What is the Best practice standard User Acess Test for WIN2012 AD

Hello,
as before, add a computer to the domain and log on with a domain user account to the computer.
You should be able from the client machine to open the sharedfolders on the DCseither with:
\\DCName\sysvol
\\DCName\netlogonor \\NetBiosDomainName\sysvol
\\NetBiosDomainName\netlogon
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Standard User Analyzer - Microsoft Compatibility Toolkit 5.6 - No (valid) log Error

Information:
Test machine running Windows 7 Professional 64 bit.
Machine is bound to an Active Directory domain
Logged in as a standard user.
I am testing some applications for compatibility in my company on this machine. I am currently trying to utilize the "Standard User Analyzer" tool to determine the shims I need to apply to make these applications work successfully.
Here's what happens:
-I launch Standard User Analyzer
-I "Browse" to "c:\programs\app.exe" (we have the applications housed in this folder instead of Program Files)
-I uncheck the "Elevate" option, and launch the application.
-I complete some operations within the application to allow the Standard User Analyzer to determine the best course of action.
-I exit the application.
-I receive the error:
Standard User Analyzer
Failed to load log file C:\Users\rryan\AppData\Local\Temp\sua :
No (valid) log file is found.
OK
After clicking okay, nothing happens. It does not provide me with any mitigation suggestions.
Once my account is verified, I can post a screenshot of the error.
I would appreciate any assistance you can provide so that I can utilize this application.
Thank you.

Tried that. That did not work, either. This seems to be a common problem with people, which has yet to be resolved.
Plus, using the administrator account is NOT a solution. This is the "Standard User Analyzer." If I am running it as an administrator account, it defeats the purpose of the tool.
The instructions for the tool even state that using it with the administrator option is not best practice.
I'm also not sure why you would direct me to a "test" scenario thinking that would resolve my issue. It doesn't even come close. I used that page months ago when I was learning how to use this. Not an appropriate answer at this
point.
An actual resolution would be greatly appreciated.

Standard User rights to copy .exe files in System32 directory?

I am trying to lock down my son's computer to stop him playing games on it. However he seems to have found a security hole that allows him to elevate himself to Administrator which overcomes all my attempts to lock down the PC. It seems that the default
security settings for a Standard User on Win 7 Home Premium (64 bit OS on a Dell laptop) has permissions to copy a file in the Windows\System32 directory. That allows him to copy cmd.exe over osk.exe. Then from the logon-in screen he can invoke a command shell
using the accessability features (osk.exe = onscreen keyboard), this command prompt runs at an Admin security level (I guess because it is invoked by a kernel process??) he can then use the net user command to elevate his user account to be an Administrator
account.
I seems strange to me that a standard user has rights to copy .exe files around in the system32 directory. Can anyone verify if this is expected behaviour or has the system been altered in some way that I am not aware? If so can anyone help by providing
guidance on how to reset the security permissions on system32 back to the correct default settings.
Any help appreciated.
Pedro.

By default standard user doesn't have any permission in System32 and is unable to install any programs. I believe he somehow manage to get access to administrator password. You may try to remove all administrator permissions and then change your administrator's
password and enable bitlocker.

Workflow Jobs in SAP Identity Management

Hello Experts,
We have SAP Idm 7.1, Novell eDirectory and GRC AC 5.3 Installed successfully.
Now, I have to create 2 workflow jobs in SAP IdM 7.1 for Novell eDirectory.
1- One job to query the Novell IDM Vault for any new identities and populate NW IDM.
2- The second job to query Novell IDM to determine if any identities have been changed from u2018Activeu2019 to u2018Terminatedu2019. If the ID has been changed to u2018Terminatedu2019 then lock the SAP ID and remove the roles, and set the User Group to u2018Expiredu2019, and set the expiration date to the day prior to termination."
Can anyone let me know, how can I create those 2 workflow jobs?
Thanks,
Haleem

the implementation guide contains an error:
in the class MyOnSubmit{...
the head of the function should be:
public IdMValueChange[] onSubmit(Locale aLocale, int aSubjectMSKEY, int aObjectMSKEY, Task aTask, IdMSubmitData aValidate) throws IdMExtensionException {
the guide defines the task as int.
br
Andreas

Standard users of workflow provided by sap

Similar Messages

Maybe you are looking for