Standard value for performance monitoring

Guys,
I am looking into performance monitoring in the RWB bacause I think our production server is too slow. I get an average processing time per message around 60 sec, +/- 30 sec depending on the volume going through. This is obviously an unexceptable value...
But I was wondering, are there standards set for these values to indicate when performance is too (s)low? Any reference docs available from SAP?
Thanks

There are various factors need to be considered. 60 seconds happening for almost all interfaces or only some specific. If only for some interfaces, then check the message volume size. SAP recommends message size up to 5 mb for optimum performance. Also security layers such as https/ssl and message level security such as encryption or digital signing/verify could cause some additional delay in processing too.
Fixing Hardware is easy... You go for the SAP recommended spec.
If you are using PI 7.1 or above use Message Packaging configuration. This will help considerable boost in performance.
Please check this link
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/7a6e3469454b2be10000000a155369/content.htm

Similar Messages

Solution manager for performance monitoring

Hi,
We have implemented solution manager in our project.Can anyone tell me how is this useful for performance monitoring and how can we check expensive sql statements using this.
It would be helpful if anyone can provide me some documentation on this.
Thanks

Hi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/3f99cc89-0701-0010-9c86-eae847ae6cd2
refer above threads,
Thanks
Syf

Different transaction codes useful for Performance Monitoring

Hi Experts,
Please can you guide me on this question, as to what are the different transaction codes useful for Performance Monitoring i.e. workload statistics and database statistics? What kind of statistics do each of these codes provide?
Many thanks,
Mithun

Hi Mithun
In performance issuses you need to look in terms of many ways that is..
Workload analsys
ST03N: Statistics Regards Locallly
ST03G: Statistics Regards Golbally
STAD: Individual Statistics Regards
STATTRAACE: Individual Statistics Regards Trace
ST07 : User Distribution
Buffers and Memory
ST02 : Buffers and Memory and swaps monitoring
ST10: Table Acess
OS Monitoring
OS04: Locally monitoring
OS07: Remotely monitoring
OS01: LAN check
DataBase Side
ST04: Performance overview
DB01: Exclusive locks
DB02: Tables/Indexes
BackgroundJobs monitor
SM37
other tcodes
ST22: Abap Dumps
SM12: Lock Entries
SM56: NumberRange Buffers
SU56: User Buffer
all above transactions are need to monitor for Performance.
Regards
Bandla

Is there an optimal luminance value for LCD monitors

Hi you all,
I use Lacie 319 high end monitor as my primary monitor and "generic" Fujitsu as my secondary monitor (for PS tools etc.) I have calibrated the monitors with Spyder Elite 3, which also measures the ambient temperature of the room. Based on that measurement it suggests 140 cd for the white point (brightness) to calibrate the screen for. If you do this the prints printed with Epson 4900 (as well as with my previous Epson 4800) print far too dark. The colours are rendered for the printer with Image Print RIP (Colorbyte software). When I calibrate my monitor down to 80 cd the prints are quite OK although still a tiny bit too dark. My question is should I do the LR of PS optimisation of my pictures in the 140 cd monitor brightness and then reduce monitor brightness mechanically to the cd value which gives optimal brightness of the print (some 70 cd?) . Of course I have to adjust the brightness of the picture to be printed viasoft proofing. If continue doing as I do now making all my picture adjustments using a very low monitor brightness (ideal for the printed result) am I working in a less than optimal area for the monitor to deal with colors. Also do many of the folks in the internet see my pictures too light because they are using much brighter monitors than what I used to adjust the pictures.
Having asked the question I do know that many things affect on how you see or perceive the colors as well as the brightness of the print. So the answer is not that it depends on where you look your prints. I know the measured ambient light of my "lab" (was a photographer already in the time of film) suggests that I should use 140 cd as the brightness value of my monitor. Doing so produces prints far too dark when looked at the same ambient light. Using 80 (or 70 to be exact) cd monitor brightness gives good print results when the prints are looked in the same (as above) ambient light. My question is am I no adjusting my pictures too light for those using the "default" monitor brightness and is the color management of LCD monitors up to standard if you dial them as down as was customary for the big old CRTs.
yours Kari

General rule of thumb is:
80 - 90 cd/m2 for print
130 - 140 cd/m2 for screen
What I do:
Edit everything (print and screen) on a 80cd/m2 monitor. It works out very well.
Sounds like you're on the right track.

Turning PM notification into work order - standard value for business area

Hello,
when turning a PM notification into a work order in IW22, by pressing the create button, a windows comes up where
'Order type', 'Business Area' and 'Main Work Center' can be entered.
The field for business area is empty, but I would like to set a standard value, that comes up automatically when this window opens.
Where can I make settings for that?
Thanks
Anne

in IW22 go to - extras -settings- default values
note - these will apply to your user id only

Basic starting point for performance monitoring of Hyper-V infrastructure

I am new for this topic and cannot found the info, please help.
In the past, there were a series of article which describe how to monitor Hyper-V through performance counters. E.g.
http://blogs.msdn.com/b/tvoellm/archive/2009/04/23/monitoring-hyper-v-performance.aspx
http://blogs.msdn.com/b/tvoellm/archive/2008/05/09/hyper-v-performance-counters-part-two-of-many-hyper-v-hypervisor-counter-set.aspx
http://blogs.msdn.com/b/tvoellm/archive/2008/05/09/hyper-v-performance-counters-part-three-of-many-hyper-v-logical-processors-counter-set.aspx
http://blogs.msdn.com/b/tvoellm/archive/2008/05/12/hyper-v-performance-counters-part-four-of-many-hyper-v-hypervisor-virtual-processor-and-hyper-v-hypervisor-root-virtual-processor-counter-set.aspx
http://blogs.msdn.com/b/tvoellm/archive/2008/09/29/hyper-v-performance-counters-part-five-of-many-hyper-vm-vm-vid-numa-node.aspx
http://blogs.msdn.com/b/tvoellm/archive/2009/12/18/hyper-v-performance-faq-r2.aspx
http://blogs.msdn.com/b/tvoellm/archive/2010/01/08/hyper-v-iscsi-performance-numbers.aspx
However, they are for window server 2008. Is there any more recent article of the same topic for window server 2012 and 2012 R2 Hyper-V ? Apart from this, is there any MS article which describe the suggested alert threshold for these performance
counters ? Thanks in advance.

All of the guidance from TonyV that you found still applies. And is still very relevant.
And MSFT has never given guidance in regards to any performance counters that I can ever recall.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

PerformanceCounter.NextValue with static value of Performance Monitor

Hi !
I have one question about the documentation "PerformanceCounter.NextValue Method for .Net Framework 4.5".
In the remark note we have the following:
If the calculated value of a counter depends on two counter reads, the first read operation returns 0.0. Resetting the performance counter properties to specify a different counter is equivalent to creating a new performance counter, and the
first read operation using the new properties returns 0.0. The recommended delay time between calls to the NextValue method is one second, to allow the counter to
perform the next incremental read.
But i need the counter "Current Bandwith" of "Network Interface" category, and it is static, its value does not change. I need to do two readings NextValue for static counters?
Thanks!

Hi Rafael,
I think this thread is specific to Windows Performance forum. This form is to discuss problems about CLR development. So I am helping you to move this thread directly into that forum. Thank you for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Application Server (Pertinent Report values for performance metrics)

Hi
With dmstool what are the most relevant values to collect. My objectives are to compare performance metrics on two environments. First one is on 9iAS (or 10 g AS), the second is a weblogic environment.
Regards
Den

when running the dmstool -dump i noticed that some requests where throwing errors "connection refused".
I verified the server properties focusing on the dms port 7200;
I noticed that the listening adress and port was missing cfr httpd.conf
After adding this info metrics are displayed
thanks for the clue;
chris

How to define a standard value for a table field

Hi All,
I have a date field in a database table, for that while maintaining if we don't give any value it should get the present date. How can we do this.
Thanks,
bsv.

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
<p>Blair Wheadon</p>
<p>Product Manager, Crystal Reports</p>

How is solution manager useful for performance monitoring

Hi,
I want to check expensive sql statements in production and quality systems.How can solution manager be useful for this.
It would be great if anyone can provide me some documentation on this

Hi,
In Solution Manager, there is an Early Watch Analysis report which is generated and which has section in the report ' Performance Indicator' in that section you will get 2 things :
1. Top 10 Transaction codes which has huge response times.
2. Top 10 program which has huge response times.
and after that you also get the list of expensive SQL statement in the report and then you can just optimize the queries and improve system performance.
Regards,
Harsh

RZ20, No value for Performance/Backup and Restore node

Hi Experts
In RZ20 - CCMS monitoring there was no MTE for the database. i executed the report RSMON0, which created the node Microsoft SQL server monitor. But not all the nodes have the data.
Space Management has the data but _Performance , Backup/Restore and Health have no data collected.
I have already implemented the note 1141047 but no data collected.
system details
SP 15
Kernel support pack level 159
database MSSQL 9.00.4035
Please help me
regards
Naveen

What error?
FYI: No iTunes content is included in any iPhone backup. After you restore from backup, you must sync to restore your iTunes content.

How to pass the standard value for the entire datapackage in the routine

Hi Gurus,
I have timestamp field in the target. In endroutine , i assigned system date to the tiemstamp field . If i assign sy-datum to that field, if i get 4 datapackage im getting 4 different timestamp for each of the datapackage...
But my requirement is the timestamp should not vary for each of the datapackage.
For eg.
Timestamp
20111212060205 - Datapackage 1
20111212060602 - Datapackage 2
But i need as
Timestamp
20111212060205 - Datapackage 1
20111212060205 - Datapackage 2
How to pass it?
Thanks in advance

you can use tvarv table.
if the datapackage number = 1,
use the current timestamp
overwrite the existing entry in tvarv.
else
use timestamp of tvarv

SAP Collector For Performance Monitor Slow

Hi,
I have created a background process for RSCOLL00 to run hourly.
But it took half an hour to complete the job for 3 time slot, namely from 8-9am, 1-2pm and 7-8pm. At other times, it tooks just a few seconds to complete.
When I list the job log for those slow 3 time slots, there were some errors:
Message text                                       Message class        Message type
Error at Create Object: LCA                 SADA                      S
Error at Create Object: LDA                 SADA                      S
Error at Create Object: LEA                 SADA                      S
Anyone has any ideas what these errors are and how to make get rid of them.
Thank you.

Hello,
Those appears to be some sort of APO/Livecache connections. Could you
confirm if these are valid connections?
LCA, LDA, LEA, DB connections can be removed from DBCO.
regards,
John Feely

Standard Values in Production Order for Alternate Work Center

Hi SAP Expert,
I would like to find out whether there is possible solution for the requirements as below:
e.g.
>>> Routing for Product A only has one Operation 0010.
>>> 4 Work Centers/Resources (A,B, C, D) can be assigned to run this operation where all these 4 Work centers/resources are having different capacities (Setup, Labour, Machine hour & Electricity are different).
>>> Out of these 4 work centers, only one work center will be selected (Selection criteria will be based on the capacities & availability).
>>> In my current setting, only one preferred work center (A) is maintained in the routing for operation 0010.
Issue:
>>> If I select the work center B manually in APO during the planned order creation, the Production Order created will be tied to work center B but the standard values captured in the Production Order are still referred to the standard value of A.
Question:
1. Is there any way I can maintained in the routing so that it will captured all the different standard values for each work centers?
2. If the answer is yes for Q1, then can the SAP auto populate the correct standard value into the Production Order according to the work center I selected before the planned order is converted into Production Order?
Thanks.
Regards,
Hooi Chia

Hi,
You can use alternative sequence in routing and mainain three different sequence for all 4 workcenter.
At APO side you can maintain priority for alternative sequence in PPM/PDS.
Now when you execute the scheduling Heuristic depending on priority and capacity workcenter will be assigned.
Regards,
Vishal

Windows 8.1 forgets dpi / display size settings for one monitor on almost every reboot

I use TV 32" with 1920x1080 and cintiq 13" with 1920x1080
when I boot my PC the resolution is fine but DPI is wrong.
In smaller monitor It's look like DPI is higher than the bigger one.
I already set dpi to be the same (smallest 100%) but it's not work until I do something to change display setting.
It's really annoy me. This problem is not happen when I use windows 8
Only solution I found is turn off
"Turn on fast start-up".
When I do that It's boot like what I want. every monitor is the same DPI.
But it'll make my boot time longer.
It should be just start up windows and use the same dpi from the start.
So I think this problem is a bug in windows 8.1
Best regards

Thank you for reply.
I've already used the latest graphic card driver. But It's won't help this issue.
In registry editor. I check those variables then value of them is already set like that blog suggest.
So , it look like when windows start-up(with fast start-up) It use something like
suggest value for different monitor size instead of what I set in control panel. But when I turn off fast start-up windows use my setting value.
And I think there are a lot of people who got the same problem as me.
Here is an example.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-desktop/windows-81-forgets-dpi-display-size-settings-for/385cb615-d699-47f8-8c12-717e3364c866

Standard value for performance monitoring

Similar Messages

Maybe you are looking for