Standby database off of another standby

Using the 10g R1 Data Guard - is it possible/sensible to create a standby database (call it stdby2) from another standby (say stdby1)? Perhaps it doesn't make sense since there are no added benefits - can anyone please comment on this?
Thanks,
Sophie

It is possible to replicate to a second standby from another, it is called Cascaded Destinations and is covered in the data guard documentation. Indeed each standby can support up to 9 other cascaded destinations.
There are several reasons why you may choose do do this the most obvious is the reduction in load on the primary system that results from redo transmission. I worked on one site where the link between the primary and standby was slow (34Mb) so duplicate transmission was not feasible.
Hope this helps

Similar Messages

A trigger returned a resultset and/or was running with SET NOCOUNT OFF while another outstanding result set was active

I have 2 servers connected over a low speed wan and we're running SQL Server 2008 with Merge replication.
At the subscriber, sometimes when attempting to insert new rows, I get this error:
A trigger returned a resultset and/or was running with SET NOCOUNT OFF while another outstanding result set was active.
My database doesn't have any triggers; the only triggers are the one created by the Merge replication
Also, whenever this error occurs it automatically rolls back the existing transaction
I am using DataTables and TableAdapters to
insert and update the database using transactions
What I have checked:
the database log file size is below 50Mb
Checked the source code for Zombie transactions (since I wasn't able to retrieve the actual error at the beginning)
Checked the connection between the two servers and found it congested
Questions:
How to avoid this behavior and why it's occurring at first place?
Why it's cancelling the open transaction?

did the issue happen on some specific tables or all the tables?
I suggest to run sql server trace at publisher and subscriber when the issue happens. Please involve below events and columns
Stored      Procedures
RPC:Completed
RPC:Starting
sp:Completed
sp:Starting
sp:StmtStarting
sp:StmtCompleted
TSQL
SQL:StmtCompleted
SQL:StmtStarting
SQL:BatchCompleted
SQL:BatchStarting
Unprepare SQL
‘Errors and Warnings’
ErrorLog
EventLog
Exceptoin
attention
columns:
TextData ,error, LoginName, ApplicationName , StartTime ,EndTime,DatabaseName,NestLevel,ObjectName,ObjectType,ServerName,eventsequence,linenumber,cpu,reads ,writes,rowcounts,clientprocessid,spid,transactionid
Once the issue happens, please check the trace to find which step or statement hit the error.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

I need to copy data from a table in one database (db1) to another table in

Hi
I need to copy data from a table in one database (db1) to another table in another database (db2).
I am not sure if the table exists in db2,,,if it doesnot it needs to be created as well data also needs to be inserted...
How am I supposed to this using sql statements..?
I shall be happy if it is explained SQL also...
Thanking in advance

How many rows does the table contains? There are manyway you can achieve this.
1. export and import.
2. create a dblink between two databases and use create table as select, if structure doesnot exists in other database, if structure exists, use, insert into table select command.
example:
create a dblink in db2 database for db1 database.
create table table1 as select * from table1@db1 -- when there is no structure present
-- you need to add constraints manually, if any exists.
insert into table1 select * from table1@db1 -- when there is structure present.
If the table contains large volume of data, I would suggest you to use export and import.
Jaffar

Creating a database link to another schema in the same database

Hello,
I'm trying to create a database link to another schema in the same database. It was created without errors, but when I try to use it I receive "ORA-12154: TNS:could not resolve the connect identifier specified" message...
I'm trying to do it because on my production enviroment the databases are separated, so there I can use database links without problem, but in my development environment it's all in one database separated by schemas...
So I'm trying to simulate the same system to not need to rewrite the query every time I move from development to production environment.
Any ideas?
Thanks

Hi,
Yes, you can create a database link to your own database. I've done it before for exactly the same reason you want to.
(By the way, I think it's a good reason. What are the alternatives?
Having different versions of code for Development and Production? Absolutely not! Terrible idea!
Using synonyms or substitution variables that are set differently in the different databases? That might be more efficient than a database link, but efficiency probably isn't such a big issue in Development.
[Conditional compilation|http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/fundamentals.htm#sthref250]? This might be good; it has all the efficienty of the above options, with more clarity.)
Assuming you do want to stick with a database link, not all errors are caught when you create the link.
Is the Development database in the tnsnames.ora file of the Development server? Do you have other database links, either in the Development server or pointing to it, that work? What is different about the ones that work, and the one that doesn't?
Edited by: Frank Kulash on Oct 14, 2009 1:58 PM
The more I think about this, the more I agree with the earlier respondent: synonymns are a good solution for this.
To that suggestion you replied:
On this way I might use "select * from SCHEMA.table" instead of "select * from table@SCHEMA"... I looking for an option to use the second way...Actually, the suggestion was that you say:
select *
from SCHEMA_table_ptr;where schema_table_ptr is a synonym.
In Development, that synonym is defined as schema.table.
In Production, that synonym is defined as table@SCHEMA
Why are you "looking for an option to use the second way"?
If you think that people reading the code should realize that the query is being done via a database link (at least in Production), then add a comment.

Not able to connect linux database instance in another machine

Hi,
I have installed oracle 10g database server in Linux, and i created one database instance. and i have added tns entry and listener entry.
I am to connect the database on that machine. but not in different machine. i am able to access/ping linux machine in another machine also.
while creating tns entry for linux database instance in another machine using "netca" i am getting this error.
Connecting...ORA-12560: TNS:protocol adapter error
The test did not succeed.
Some of the information you provided may be incorrect.
Click Back to review the information provided for net service name, or Change Login to change username.
I verified listener and tns entry ( i think for this listener configuration is enough) also. and database is up.
If anybody knows why i am not able to connect linux database in another machine. is there any network configurations other than listener configuration.
Thanks in advance.

yes i tried to connect with ORACLE_SID, its successful. and using tnsname like you said.
Instead of using netca to create the tnsnames.ora entry on the second server, copy the tnsnames.ora entry from the DB server. Then use tnsping to test connection :-i done above but not able to ping the tns name, i am getting this error.
TNS-12560: TNS:protocol adapter error
------------------------------------------------

Transporting large amounts of data from one database schema to another

Hi,
We need to move large amount of data from one 10.2.0.4 database schema to another 11.2.0.3 database.
Am currently using datapump but quite slow still - having to do in chunks.
Also the datapump files quite large so having to compress and move across the network.
Is there a better/quicker way?
Habe haerd about transportable tablespaces but never used them and don't know about speed - if quicker thana datapump.
tablespace names different in both databases.
Also source database on solaris opertaing system on sun box
target database on aix on ibm power series box.
Any ideas would be great.
Thanks
Edited by: user5716448 on 08-Sep-2012 03:30
Edited by: user5716448 on 08-Sep-2012 03:31

user5716448 wrote:
Hi,
We need to move large amount of data from one 10.2.0.4 database schema to another 11.2.0.3 database.
Pl quantify "large".
Am currently using datapump but quite slow still - having to do in chunks.
Pl quantify "quite slow".
Also the datapump files quite large so having to compress and move across the network.
Again, pl quantify "quite large".
Is there a better/quicker way?
Habe haerd about transportable tablespaces but never used them and don't know about speed - if quicker thana datapump.
tablespace names different in both databases.
Also source database on solaris opertaing system on sun box
target database on aix on ibm power series box.
It may be possible, assuming you do not violate any of these conditions
http://docs.oracle.com/cd/E11882_01/server.112/e25494/tspaces013.htm#ADMIN11396
Any ideas would be great.
Thanks
Edited by: user5716448 on 08-Sep-2012 03:30
Edited by: user5716448 on 08-Sep-2012 03:31Master Note for Transportable Tablespaces (TTS) -- Common Questions and Issues [ID 1166564.1]
HTH
Srini

Moving a published access database application to another domain

Is it possible to move a published access database application to another sharepoint domain? Have built an application that works fine. Another organisation wants to use it, hence the need to move the application to
another domain. Using Sharepoint 2013 online version.

Hi,
For your issue, please take steps as below:
1.Save Access app as a snapshot:
2.Upload your .app file to your new environment:
Reference:
https://support.office.com/en-us/article/Create-an-Access-app-package-5c409c03-ded9-4a41-82c3-fdd490a91b42
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I have an ipod 5 (IOS8) and two days ago my ipod died and when I tried to on it after charging it would turn on to the apple symbol and after about 5 minutes it would shut off. Another problem is that i also have a jammed home button.

I have an ipod 5 (IOS8) and two days ago my ipod died and when I tried to on it after charging it would turn on to the apple symbol and after about 5 minutes it would shut off. Another problem is that i also have a jammed home button. Is there anyway i can fix my ipod?

Try:
Turn on without Home/Power Button

Copy few test assignment with User from one database instance to another

Hi,
I have OTL ,Payroll and HRMS system. I want to Copy few test assignment with User(Few FND Users) from one database instance to another .
Source: DEV Instance
OTL users to enter their Time sheet
OTL is intergated with HRMS to pickup Employee information
Existing business users are integrated with Employee assignment etc tables to pickup person_id
Target: Want to copy few test OTL users from ONE instance to another. Bringing FND_User is easy but EMPLOYEE_ID, PERSON_PART_ID will not come during FNDLOADER .
How to bring all information from one instance to another instance? Please advice.
thanks .

Dear,
Try using HRMS configuration workbench. For this you might require support from your DBA for configuring the same. Once configured, you can move the items you want.
Regards,
Kathan

Microsoft-Windows-Folder Redirection Error 502. CSC database locked by another user

Dear all,
We are finalizing our Windows 7 migration where we migrated 500+ clients. In our enterprise concept we implemented RUP (Roaming User Profiles) and Redirected Folders for all
users. The Redirected Folders have been by enabled by a single GPO which redirects all folders from
AppData to
Searches \\servername.domain.name\documents$\%username%.
Problem:
The RUP and Redirected folders solution works fine until a new user wants to logon. This new user has been migrated to RUP and Redirected on another system and
he just wants to work on another workplace or gets a temporary pc. What happens is that redirected folders do not work. The user gets a message that the folder is not reachable and desktop is empty.
Troubleshooting:
Soon I found out that something was being locked. If we used a user account which had working Redirect Folders than this
worked for that user. An event of 10 was logged in OfflineFiles area of EventViewer to reconnect the path which was configured in the GPO.
This is example screenshot. It says "Error on Open Folder. \\server.domain.name\documents$\%username%\Desktop refers to a location that is unavailable. It could be on a hard disk
on this computer, or a on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location."
These symptoms happen randomly and not on all workstations. The pain here is when it happens on a portable computer. For desktop we disabled the "Disable Offline Files' in "Manage
Offline Files" control panel and then reboot. After the reboot the folders are directed
and it works without these errors... On portable computer we can't use this work around as they need to work offline.
If I connect to the share without the FQDN like \\servername\documents$\%username%\Desktop than this works fine and user can access all folders. When I try the FQDN path which is
configured in the GPO to redirect user to like \\servername.domain.name\documents$\%username%\Desktop than it fails with this message. I personally think because the C:\Windows\CSC database is locked by the previous user who has been logged on this system.
An example of the event generated in the Applications Event viewer part (I removed some username and server path):
Log Name:      Application
Source:        Microsoft-Windows-Folder Redirection
Date:          1-2-2011 17:40:11
Event ID:      502
Task Category: None
Level:         Error
Keywords:
User:          domain\ivan
Computer:      computer.domain.name
Description:
Failed to apply policy and redirect folder "Videos" to "\\servername.domain.name\documents$\ivan\Documents\My Videos".
Redirection options=0x1001.
The following error occurred: "Can not create folder "\\\servername.domain.name\documents$\ivan\Documents\My Videos"".
Error details: "Access is denied.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Folder Redirection" Guid="{7D7B0C39-93F6-4100-BD96-4DDA859652C5}" />
    <EventID>502</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2011-02-01T16:40:11.486983400Z" />
    <EventRecordID>2754</EventRecordID>
    <Correlation ActivityID="{3211E6FB-2801-456D-BE6E-66AAE150A4DC}" />
    <Execution ProcessID="968" ThreadID="5856" />
    <Channel>Application</Channel>
    <Computer>computer.domain.name</Computer>
    <Security UserID="S-1-5-21-3705223304-2632712944-1292073641-26755" />
</System>
<EventData Name="EVENT_FDEPLOY_FailedToApplyPolicy">
    <Data Name="FromFolder">Videos</Data>
    <Data Name="ToFolder">\\servername.domain.name\documents$\ivan\Documents\My Videos</Data>
    <Data Name="Options">0x1001</Data>
    <Data Name="Error">Can not create folder "\\servername.domain.name\documents$\ivan\Documents\My Videos"</Data>
    <Data Name="ErrorDetails">Access is denied.
</Data>
</EventData>
</Event>
Something like this I see in the Application Eventviewer:
Environment:
Windows 7 Enterprise client with patches until 1-Nov-2010
Windows Server 2008 R2 for the Documents$ share
Windows Server 2003 R2 as the domain controller
I have tried all different option even to rebuild the CSC database but this also was not helping. I hope we are not dealing with a bug.
Any help is much appreciated.
Best regards, Ivan Versluis http://www.networknet.nl

Ivan and SteveDIG - Thanks for taking the time to post detailed information about what you have found. I have found the same things over the past few months and have been working with Microsoft to resolve this. Like Ivan, I have been told by
MS that this is a design problem in Windows 7, but they did admit it is a bug and did not charge me for the case. That was the good news. The bad news was that the problem is so 'deep' in Windows 7 that it will not be fixed until Windows 8 and
the CSC engineering team in Redmond has rejected several requests to fix this issue in Windows 7 from several customers. I personally feel we should have hauled our TAM in over this, but that wasn't my call so we haven't attempted to get an attitude
change from MS.
<RANT> I find this completely outrageous. Windows is supposed to be a multi-user operating system suitable for deployment to mobile workforces spread around the world and often using slow VPN links. Offline folders, folder redirection,
slow link detection, etc. are all great on paper and as I did the design work for the W7 solution I've just built I sold these advantages heavily. I now have serious egg on my face and am not happy. Like others here I missed this in testing as
multiple users are a fringe for us, but still important, I unfortunately didn't think to specifically test for multiple users, though I tested the features thoroughly and was happy with the results when used on single user machines.</RANT>
As identified above, this issue manifests when more than one user uses a machine and their Offline folders (all redirected folders are configured this way by default) are in an offline state when the first user logs off. The second user cannot access
this 'offline' share so folder redirection fails. We get burnt as we have latency=0 configured for slow link detection with Offline folders so users always work offline. This is partly because of WAN optimisers in the network that lie to Windows
so the online/offline transition doesn't work on slow links (not MS's fault), and partly because it made sense for other reasons.
The workaround Microsoft and I came up with for our environment was to use individual file shares for each user. We had been using a common file share with each user folder under that file share. Changing to an individual share for each users
means the share is not locked by the previous user.
Examples
This would cause a problem if John then Emma logged on to the same machine. Folder redirection would fail for Emma:
\\FileServer1\Users$\john
\\FileServer1\Users$\emma
So would this if DFS was used
\\my.domain\users\john           (points to \\FileServer1\Users$\John)
\\my.domain\users\emma          (points to \\FileServer1\Users$\Emma)
This would fix the problem:
\\FileServer1\John$
\\FileServer1\Emma$
Unfortunately we then figured we could move these shares behind DFS like so:
\\my.domain\homes\john             (points to \\FileServer1\John$)
\\my.domain\homes\emma         (points to \\FileServer1\emma$)
This was wrong. The problem returned. I assume the share that is being locked is now the DFS root and not the user share.
The operations team here is very reluctant to go with direct access to the file servers and not use DFS as that will create issues for them in the future when they need to make file server changes. I sympathise with them but can't see an alternative
at the moment as we are deploying W7 and can't stop. If I'd picked this up earlier a third party product might have been the solution (MS actually suggested this when I opened my case).
I hope the information about individual shares above is helpful to someone. Otherwise I don't really have more to add but I needed the rant :-)
<RANT>BTW. Has anyone tested changing a user’s home directory path once it is cached? Try it. Test a scenario where you move the user from one file server to another. You will not enjoy the results. I'll say no more
than this as it is off topic, but it shows the lack of investment in the CSC feature in Windows. Very disappointing</RANT>

How do I copy recordsets from one database table to another?

I am using the Database Connectivity Toolset, and would like to copy either one recordset or multiple recordsets from one Access table to a table in a different database. I would like to do it directly with the data in variant form, but I can't get it to work. I can get it to work(on a small test table) if I first convert my source variant data to a cluster, then insert that into the other database table. My real database has many items with a variety of date types. Can I copy directly variant to variant?

Is it necessary to read all the data back into LabVIEW first? The reason I'm asking is that it is much more efficient to just use SQL statements to get the data you need and write that directly to the second database. I did a quick Google search on it and came up with lots of responses on what the correct syntax is for setting that up. Using an SQL command to copy the data back and forth is analogous to copying data from one file to another using the Copy file function rather than reading the entire contents of the file, converting the file string to the data arrays, converting back to a string, and then writing it back to another file.
Chapter 5 of the Database Connectivity Toolset User Manual describes how to execute SQL queries.
If you do need to actually
see the data in LabVIEW first, then the only way to get it back into the other database is to convert those variants to LV datatypes and then cluster those values again and write them back out to the second database.

Internet is connected and majority of the websites work, yet sometimes the pictures are not loading? And the suddenly the hole page won't load? The weirdest thing is I go venture off to another website and it'll work just fine??

So I have been having this very annoying problem with the loading of certain internet sites e.g - Ebay, google maps, google in general & you tube.
My internet connection is fine and i have spoken with my service provider TPG and Apple about this annoying issue.
I can be generally browsing on google for instance and then suddenly the page freezes? No matter how many times i click the Refresh tab it still manages to do the same thing. Now the most confusing bit is, instead of clicking the refresh button I then venture off to Yahoo for instance and that website will work just fine??
Ugh, another (now) consistant issue is that none of my pictures are loading when im on Ebay? yet i can browse every catagory just fine....?
Please, if there is anyone out there HELP ME.... I'm a Mechanical Technician (Fitter by Trade) I do not class myself as a Computer Technician.... Far from it!!

Thanks for the advise....
You're correct about the steps you mentioned earlier. Tho Unfortunetely I've tried these things. Infact I was on the phone with applecare last night for about an hr & a half, yet even they seem stunned as to what is causing this?
We reset the safari in a different way as you mentioned earlier (I would not have been able to do this without some Technical assistance)
Open Finder > click on the GO tab > Hold down the OPT key & a tab will appear that reads [Libary]
Click on Libary > Now look for a folder that reads [Safari]
Drag this folder to the desktop
Now open the folder that reads [Preferances]
Look for files: com.apple.safari.plist & com.apple.Safari.RSS.plist
Now quit any programs operating & restart the computer.
Vwallaa Safari is officailly reset, it will even take you on a tour when you open it for the first time.
Now the catch is.... this didnt work "For me" So My next step was to make a dummy account on my Mac (making sure that it had administrator rights) I then tried it on the dummy account. Luck would have it as it still managed to do the same thing.
Apple came to the conclusion that restoring Lion might be a possible solution. So we done just that, wasnt till this morning when i turned on this annoying Mac i realised that it is still doing the same thing.
Apple care is going to call me this afternoon so hopefully "fingers crossed" this issue can be fixed.

Error in switching from one database location to another database location in Crystal Reports using JSP

Hi,
Please help me in resolving the issue while changing the database dynamically in crystal reports using JSP. I followed the below link to change DB connection dynamically.
CRJava Modify DB Location
Please help me on this.
While switching from one database to another i found the issue.
dbController.replaceConnection(oldConnectionInfo, newConnectionInfo,pFields,replaceParams);
The Error is:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Subreport does not exist.---- Error code:-2147467259 Error code name:failed
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2284)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:732)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:166)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:528)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:526)
    at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:524)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:423)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:480)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:421)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:351)
    at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
    at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
    at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.char(SourceFile:220)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.new(SourceFile:240)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.do(SourceFile:452)
    at com.crystaldecisions.proxy.remoteagent.RemoteAgent.if(SourceFile:429)
    at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.performDo(SourceFile:156)
    at com.crystaldecisions.proxy.remoteagent.UndoUnitBase.a(SourceFile:106)
    at com.crystaldecisions.sdk.occa.report.application.an.a(SourceFile:65)
    at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.a(SourceFile:1921)
    at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.setCurrentValues(SourceFile:2237)
    at com.crystaldecisions.sdk.occa.report.application.ParameterFieldController.setCurrentValue(SourceFile:2328)
    at org.apache.jsp.DynamicDB_jsp._jspService(DynamicDB_jsp.java:255)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:728)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:728)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:305)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:210)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:222)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:123)
    at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:502)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:99)
    at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:953)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:118)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:408)
    at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1023)
    at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:589)
    at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(JIoEndpoint.java:310)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.reportdefinition.ReportModificationException: Subreport does not exist.
    at com.businessobjects.reports.sdk.requesthandler.ParameterRequestHandler.a(SourceFile:229)
    at com.businessobjects.reports.sdk.requesthandler.ParameterRequestHandler.for(SourceFile:214)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1492)
    at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:660)
    ... 47 more
Any help Appreciated.
Thanks
Penchal

Do you have subreports in your reports?
If yes, set the connection info for the subreports as well.
Additionaly refer to the below discussion
http://scn.sap.com/thread/3153289
As you are using Crystal reports for ecllipse runtime libraries to build your jsp, you would need to post your dicussions in the below forum to get better response.
http://scn.sap.com/community/crystal-reports-for-eclipse
The above space is dedicated for the issues with crystal reports for ecllipse.
Thanks,
Prithvi

How do I disable automatic updating? I am about to switch to another browser because of the frequency with which I am delayed by an automatic update without the option to put it off to another time.

I have been using Firefox and its ancestors since the beginning. I am at the end of my rope with it. When I click a link or open the browser it is because that is what I seek to have happen. Unless there is a way to turn off automatic updating, I am going to pack it in and find another platform. I cannot see what would be lost if Firefox would do its updating on the way out, when my attention has moved on, and it is not taking up my time. Is there a solution to this with Firefox?

Hi,
It is true that the Classic Theme Restorer add-on will NOT bring back all of your customized settings/appearance on Firefox 28, but it will help a little It's recommended that you stay on the latest version to receive the latest security fixes and bug patches but you're free to downgrade if you want.
You can set these prefs in <code>about:config</code> to disable automatic updating:<br>
app.update.auto - false<br>
app.update.enabled - false<br>
app.update.silent - false<br>

Standby database off of another standby

Similar Messages

Maybe you are looking for