Starcraft II Beta Launcher (Wine) Issue

Again I seem to be running into problems with this starcraft II beta, although this time it doesn't seem the problem has come up before -- wine doesn't have the answer after a fair amount of searching. I successfully installed it to one of my partitions, and the patches were all applied without a hitch, didn't get the slow firewall problem until the last patch application though, for whatever reason. I have an nVidia GTX 260 with the most current drivers installed. When I put the following command in the terminal it hangs on the bold and then goes through the rest to give me a popup window with a nice errorlog that I will post if someone thinks it is needed. Here is the terminal output.
$ wine StarCraft\ II.exe
fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (3000): STUB
fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT 3000
[stephen@acid StarCraft II Beta]$ err:module:load_builtin_dll failed to load .so lib for builtin L"winemp3.acm": libmpg123.so.0: cannot open shared object file: No such file or directory
fixme:process:GetProcessWorkingSetSize (0xffffffff,0x3eaee88,0x3eaee84): stub
fixme:ntdll:NtQuerySystemInformation info_class SYSTEM_PERFORMANCE_INFORMATION
[b]fixme:win:EnumDisplayDevicesW ((null),0,0x3eae91c,0x00000000), stub!
[/b]fixme:win:EnumDisplayDevicesW ((null),0,0x3eae850,0x00000000), stub!
fixme:d3d:debug_d3dformat Unrecognized 909198916 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:getFormatDescEntry Can't find format unrecognized(909198916) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 909198916 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:getFormatDescEntry Can't find format unrecognized(909198916) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 875710020 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:getFormatDescEntry Can't find format unrecognized(875710020) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 875710020 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:getFormatDescEntry Can't find format unrecognized(875710020) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 1280070990 (as fourcc: NULL) WINED3DFORMAT!
fixme:d3d:getFormatDescEntry Can't find format unrecognized(1280070990) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 1280070990 (as fourcc: NULL) WINED3DFORMAT!
fixme:d3d:getFormatDescEntry Can't find format unrecognized(1280070990) in the format lookup table
fixme:d3d:swapchain_init Add OpenGL context recreation support to context_validate_onscreen_formats
fixme:thread:SetThreadIdealProcessor (0xfffffffe): stub
fixme:thread:SetThreadIdealProcessor (0xfffffffe): stub
fixme:thread:SetThreadIdealProcessor (0xfffffffe): stub
err:ole:COMPOBJ_DllList_Add couldn't load in-process dll L"mmdevapi.dll"
err:ole:create_server class {bcde0395-e52f-467c-8e3d-c4579291692e} not registered
err:ole:CoGetClassObject no class object {bcde0395-e52f-467c-8e3d-c4579291692e} could be created for context 0x7
fixme:dsalsa:IDsDriverBufferImpl_SetVolumePan (0x217530,0x217430): stub
fixme:dsalsa:IDsDriverBufferImpl_SetVolumePan (0x217530,0x217430): stub
fixme:dsalsa:IDsDriverBufferImpl_SetVolumePan (0x217530,0x217430): stub
err:module:load_builtin_dll failed to load .so lib for builtin L"WLDAP32.dll": libssl.so.0.9.8: cannot open shared object file: No such file or directory
err:module:import_dll Loading library WLDAP32.dll (which is needed by L"Z:\\media\\SC2\\StarCraft II Beta\\Support\\Battle.net.dll") failed (error c000007a).
fixme:process:GetProcessWorkingSetSize (0xffffffff,0x3ead154,0x3ead150): stub
fixme:process:GetProcessWorkingSetSize (0xffffffff,0x3eacdf4,0x3eacdf0): stub
fixme:ntdll:NtPowerInformation semi-stub: SystemPowerCapabilities
fixme:exec:SHELL_execute flags ignored: 0x00000100
fixme:dxdiag:ProcessCommandLine /t unimplemented
^C
fixme:win:EnumDisplayDevicesW ((null),0,0x3eae91c,0x00000000), stub!  <--- hangs here
The same thing occurs when I use this command (or use the shortcut):
$ wine "D:\SC2\Starcraft II Beta\StarCraft II.exe"
Any ideas? The only other thing to note is before it hangs, my mouse will not show up on the screen where the game should launch.

lymphatik wrote:
You should have a look here instead
http://appdb.winehq.org/objectManager.p … &iId=19376
Thanks, and good call, but there is not any documentation I can find on a launcher failure, the bolded code above just seems to be associated with screen tearing -- which seems like usually is a driver issue (most of the examples are with WoW).
Has anyone got the beta working with a GTX 260?

Similar Messages

  • Starcraft 2 beta wine crash

    Hi all,
    Everything worked just fine for Starcraft II Beta, until today. A new SC2 patch was released, patch 14 and after updating, SC2 just crashes after a few seconds and sometimes during startup. I have no idea what the cause of this problem is, and command line output doesn't show anything interesting either.
    I tried ubuntu, and everything works just fine. So it should still work.. But it doesn't.
    Therefor I guess it's an arch package upgrade that caused this. Is anyone experiencing the same?
    I'm running the bin32-wine-sc2 package from aur, but bin32-wine doesn't work either. I also tried a 32bits chroot with the same results.
    I did a system upgrade yesterday, and I didn't play anymore until the patch.
    Edit; the SC2 error reporter gives an acces violation, nothing interesting either..
    Last edited by Silverwing (2010-06-02 17:09:08)

    I see serveral people on the app db page (http://appdb.winehq.org/objectManager.p … &iId=19376)  with the same problem, I guess it's not arch linux related at all. I'm experiencing the same issue with ubuntu as well now. No idea why it did work before (maybe luck)

  • [Solved] Blizzard Downloader Problem for Starcraft II beta (Wine)

    Hey all, I am running wine32 on my 64bit system, and also running into problems downloading the SC2 beta.
    $ wine Downloads/StarCraft_2_Beta_enUS.exe
    fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONNECT_TIMEOUT (60000): STUB
    fixme:wininet:InternetSetOptionW INTERNET_OPTION_SEND/RECEIVE_TIMEOUT 60000
    http error code = 404
    fixme:wininet:InternetSetOptionW Option INTERNET_OPTION_CONTEXT_VALUE; STUB
    err:wincodecs:JpegDecoder_CreateInstance Failed reading JPEG because unable to find libjpeg.so.8
    fixme:ole:CoCreateInstance no instance created for interface {9edde9e7-8dee-47ea-99df-e6faf2ed44bf} of class {9456a480-e88b-43ea-9e73-0b2d9b71b1ca}, hres is 0x80004005
    err:ole:OleLoadPicture IPersistStream_Load failed
    An error box for the blizzard downloader also pops up saying the application couldn't be loaded for some reason, and to close everything and try again...
    Could the servers just be overloaded? I have been trying this for quite some time, and there don't seem to be any helpful posts (even from WoW downloads).
    Thanks!
    Last edited by 8Bit (2010-05-11 20:14:48)

    Daenyth wrote:
    err:wincodecs:JpegDecoder_CreateInstance Failed reading JPEG because unable to find libjpeg.so.8
    Looks like your stuff is outdated. Make sure all AUR packages are compiled against the latest libraries. Arch-games offers bin32-wine packaged as well.
    After yaourt -Su --aur the same error comes up. I also did a -Syu just because, no change to the error unfortunately.
    Is there anything else I could post that might help?

  • Flash-9 Beta and Win 2000

    Hi
    Flash-9 beta version is for Win-XP and above.
    Is there any way to install Flash-9 Beta in Win 2000.
    Regards

    The Flash 9 BETA? Where/how did you obtain this? If you are
    truly a BETA tester then you would be
    asking on the BETA listserv - not the public forum. You must
    have obtained this BETA illegally and
    have now announced it publicly on Adobe's forum - I would not
    have done such a thing to be honest -
    it is illegal for you to have this copy of the flash tool if
    you were not legally supposed to be
    testing it.
    ~~~~~~~~~~~~~~~~
    --> Adobe Certified Expert
    --> www.mudbubble.com
    --> www.keyframer.com
    ~~~~~~~~~~~~~~~~
    ANDR_ew wrote:
    > I've installed Flash 9 beta and see no help files at all
    in Flash Help (F1)
    > section.
    >
    > Is it OK, or that's a bug?
    >
    > Is it possible to insert into F1 window a standart Flash
    8 Help "books" ("How
    > to use help", "Getting started with Flash", "Using
    components" ans so on) and
    > also a new AS 3.0 help section?
    >
    > Thanks!
    >

  • Preview in Safari Beta for Win not working

    Hello All,
    Anyone else having this problem?
    I installed the new Safari beta for Windows (xp) and added it
    to my Preview in Browser list in Dreamweaver, pointing it to
    safari.exe, but when I try to preview, Safari opens and displays
    the home page, not my Dreamweaver project page.
    Any thoughts,
    Scott

    Hi Scott,
    Safari beta for win has a number of problems. Loading local
    pages is one of
    them. I found if I preview in another browser like FF from DW
    and then copy
    and paste the page URL into Safari it works sometimes. Search
    this newsgroup
    for "OT: Safari for XP/Vista"
    --Nancy O.
    "scottmcll" <[email protected]> wrote in
    message
    news:f4u864$pkv$[email protected]..
    > Hello All,
    >
    > Anyone else having this problem?
    >
    > I installed the new Safari beta for Windows (xp) and
    added it to my
    Preview in
    > Browser list in Dreamweaver, pointing it to safari.exe,
    but when I try to
    > preview, Safari opens and displays the home page, not my
    Dreamweaver
    project
    > page.
    >
    > Any thoughts,
    >
    > Scott
    >

  • Launch win 7

    I installed win 7 with bootcamp and after the installation when i tried to launch win 7 there only shows up a black window with flashing bar. i would be really grateful so helping me.thank you

    Janne69 wrote:
    so i tried the installation now with windows xp sp2, and what a surprise its the same problem after the restart i chose windows and there was also the black window.
    Please provide more details about your OS and exactly what steps you are taking to install. Here are the instructions.
    http://manuals.info.apple.com/en/bootcampinstall-setup.pdf
    Please confirm you are following them.

  • FB beta 3 form issue - bug

    FB beta 3 form issue - required fields remain with red border
    When a form is submitted the erroring formitem remains with a
    red border!
    I am using the following validation function.
    private function valStep7():void {
    if (r_username.text.length == 0){
    r_username.errorString = "Please enter a valid username";
    focusManager.setFocus(r_username);
    }else if(r_givenname.text.length == 0){
    r_givenname.errorString = "Please enter a valid given
    name!";
    focusManager.setFocus(r_givenname);
    }else if(r_surname.text.length == 0){
    r_surname.errorString = "Please enter a valid surname!";
    focusManager.setFocus(r_surname);r_address
    }else if(r_address.text.length == 0){
    r_address.errorString = "Please enter a vaild address!";
    focusManager.setFocus(r_address);
    }else if(r_suburb.text.length == 0){
    r_suburb.errorString = "Please enter a valid suburb!";
    focusManager.setFocus(r_suburb);
    }else if(r_findus.selectedItem.record_id == 0){
    focusManager.setFocus(r_findus);
    Alert.show('Please select how you found out about us!');
    //+'\n'
    }else{
    usernameService.checkFinalUsername.send();
    is there an easy way to remedy this or has someone had a
    similar issue?
    the text input controls look like this....etc.
    <mx:FormItem label="First name" styleName="formlabels"
    required="true">
    <mx:HBox width="100%" height="100%"
    verticalAlign="bottom">
    <mx:TextInput id="r_givenname" width="180" text=""
    color="#000000" />
    </mx:HBox>
    </mx:FormItem>
    Any help appreciated...
    Regards
    Chris

    Hi Chris,
    This is just a quick guess, but -- I think you may need to
    clear the errorString once the form item has been updated to
    contain a valid value.
    - Peter

  • Cannot get Starcraft 2 Beta to work with BootCamp

    I have a mid 2008 15" 2.4GHz Macbook pro running OS 10.6. I am trying to run the Starcraft 2 beta on my 64x Windows 7 partition, it tells me that "My 3D somethingorother is dedicated to another program. Please close all other 3D programs and try again." I downloaded the update here http://www.apple.com/support/bootcamp/, but it tells me "BootCamp 3.0 is not installed. Install BootCamp 3.0 and try again." I have BootCamp 3.0.1 installed on my OSX partition (not sure if this is the same as 3.1), but how can I get the software update to work? I need to play starcraft!

    Hi!
    I would suggest the following:
    Insert your Snow Leopard disk, when you are in Windows 7. Install the Bootcamp 3.0 drivers.
    Then restart your computer into Windows 7 and apply the Bootcamp 3.1 update.
    Then, you can try again running Starcraft 2 beta. However, you can not be sure that this beta version
    will be running.
    With regards,
    Dagd

  • AIR 2.0 Beta - JAWS 11 issues?

    The known issues list for AIR 2.0 beta lists some issues with JAWS 11 which they say will be sorted before the full release.
    Can anyone clarify what these issues are?  If no-one knows, does anyone know a good email address to shoot that question off to?  I'm going around in circles on the Adobe website looking for an appropriate email or place to put the question so here I am *waves*
    Hasd anyone had much experience with creating full accessibility using Adobe AIR - especially with regards to screen reader software and speech-to-text software?  My clients are specifically quoting JAWS 11 as the priority testing platform for screen reader, so I need to make my application as accessible to that as possible... so the known issues rings alarm bells for me.... here's hoping.....
    Thanks in advance for any info.

    Hi Rahul,
    You can get information about all the network interfaces available on your machine using AIR 2:
           http://help.adobe.com/en_US/as3/dev/WSb2ba3b1aad8a27b0-181c51321220efd9d1c-8000.html#WSb2b a3b1aad8a27b04a6701d612482d399e5-8000
    -romil

  • Which version of ittunes works better on win 7, which version of ittunes works better on win 7

    i tried the latest version of ittunes on my PC with an OS win 7 ultimate , once i go to the store it's not responding , could you help me here?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Any ideas how to better troubleshoot VPN issue?

    Hi,
    I've recently upgraded my WLAN router to a brand new AVM FRITZ!Box WLAN 7390, in part for its VPN capabilities.
    So far, I've been unable to create a working connection.
    AVM's VPN is based on Cisco IPSec, and they provide a step-by-step procedure on how configure a Mac-based VPN connection (http://www.avm.de/de/Service/Service-Portale/Service-Portal/VPN_Interoperabilita et/16206.php - unfortunately only available in German, sorry). Following it, I still can't get it to work. Contacting their support I got first the same procedure and after pointing out I already followed it a "we don't support other vendors".
    Funny enough, I got a second VPN connection to my work's VPN server just fine, though admittedly there we have a true Cisco box.
    My initial setup was based on a 192.x.x.x net on my AVM, I could establish a VPN connection but coudn't ping/ssh/http/you-name-the-protocol in either direction. Our companies net is a 10.x.x.x net so, and as I have also VMware fusion running on my Mac with DHCP enabled on a different 192.x.x.x net plus a third 192.x.x.x net from my Wifi access I decided to reconfigure my AVM net to a 172.x.x.x net and stop VMware services for the tests (ie simplify as much as I could to help troubleshoot).
    Alas, instead of being able to establish a non-working VPN connection, now I ain't able to get the tunnel up. IKE Phase 1 completes but Phase 2 doesn't.
    Here's the relevant section from kernel.log:
    Dec 30 11:47:57 jupiter configd[16]: IPSec connecting to server <myservernameismybusiness>.dyndns.info
    Dec 30 11:47:57 jupiter configd[16]: SCNC: start, triggered by SystemUIServer, type IPSec, status 0
    Dec 30 11:47:57 jupiter configd[16]: IPSec Phase1 starting.
    Dec 30 11:47:57 jupiter racoon[1910]: IPSec connecting to server 77.x.x.x
    Dec 30 11:47:57 jupiter racoon[1910]: Connecting.
    Dec 30 11:47:57 jupiter racoon[1910]: IPSec Phase1 started (Initiated by me).
    Dec 30 11:47:57 jupiter racoon[1910]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1).
    Dec 30 11:47:58 jupiter racoon[1910]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2).
    Dec 30 11:47:58 jupiter racoon[1910]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2).
    Dec 30 11:47:58 jupiter racoon[1910]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode).
    Dec 30 11:47:58 jupiter racoon[1910]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3).
    Dec 30 11:47:58 jupiter racoon[1910]: IKE Packet: transmit success. (Information message).
    Dec 30 11:47:58 jupiter racoon[1910]: IKEv1 Information-Notice: transmit success. (ISAKMP-SA).
    Dec 30 11:47:58 jupiter racoon[1910]: IPSec Phase1 established (Initiated by me).
    Dec 30 11:47:58 jupiter racoon[1910]: IPSec Extended Authentication requested.
    Dec 30 11:47:58 jupiter configd[16]: IPSec requesting Extended Authentication.
    Dec 30 11:48:01 jupiter configd[16]: IPSec sending Extended Authentication.
    Dec 30 11:48:01 jupiter racoon[1910]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 11:48:01 jupiter racoon[1910]: IPSec Extended Authentication sent.
    Dec 30 11:48:02 jupiter racoon[1910]: IKEv1 XAUTH: success. (XAUTH Status is OK).
    Dec 30 11:48:02 jupiter racoon[1910]: IPSec Extended Authentication Passed.
    Dec 30 11:48:02 jupiter racoon[1910]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 11:48:02 jupiter racoon[1910]: IKEv1 Config: retransmited. (Mode-Config retransmit).
    Dec 30 11:48:02 jupiter racoon[1910]: IPSec Network Configuration requested.
    Dec 30 11:48:03 jupiter racoon[1910]: IPSec Network Configuration established.
    Dec 30 11:48:03 jupiter racoon[1910]: IKE Packet: receive success. (MODE-Config).
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration started.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = 172.77.7.14.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration: SAVE-PASSWORD = 1.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration: DEFAULT-ROUTE = local-address 172.77.7.14/32.
    Dec 30 11:48:03 jupiter configd[16]: host_gateway: write routing socket failed, command 2, No such process
    Dec 30 11:48:03 jupiter configd[16]: IPSec Phase2 starting.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Network Configuration established.
    Dec 30 11:48:03 jupiter configd[16]: IPSec Phase1 established.
    Dec 30 11:48:03 jupiter configd[16]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.43.242), current interface setting (name: utun0, family: 1001, address: 172.77.7.14, subnet: 255.255.255.255, destination: 172.77.7.14).
    Dec 30 11:48:03 jupiter racoon[1910]: IPSec Phase2 started (Initiated by me).
    Dec 30 11:48:03 jupiter racoon[1910]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1).
    Dec 30 11:48:03 jupiter configd[16]: network configuration changed.
    Dec 30 11:48:03 jupiter configd[16]: IPSec port-mapping update for en1 ignored: VPN is the Primary interface. Public Address: ac4d070e, Protocol: None, Private Port: 0, Public Port: 0
    Dec 30 11:48:03 jupiter configd[16]:
    Dec 30 11:48:03 jupiter configd[16]: setting hostname to "jupiter.local"
    Dec 30 11:48:03 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:06 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:07 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:09 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:09 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:12 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:13 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:15 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:15 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:18 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:18 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:21 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:21 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:24 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:25 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:27 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:27 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:30 jupiter racoon[1910]: IKE Packet: transmit success. (Phase2 Retransmit).
    Dec 30 11:48:30 jupiter racoon[1910]: IKE Packet: receive success. (Information message).
    Dec 30 11:48:33 jupiter configd[16]: IPSec disconnecting from server 77.x.x.x
    Dec 30 11:48:33 jupiter racoon[1910]: IPSec disconnecting from server 77.x.x.x
    Dec 30 11:48:33 jupiter racoon[1910]: IKE Packet: transmit success. (Information message).
    Dec 30 11:48:33 jupiter racoon[1910]: IKEv1 Information-Notice: transmit success. (Delete ISAKMP-SA).
    Dec 30 11:48:33 jupiter configd[16]: SCNC Controller: service_ending_verify_primaryservice, waiting for PrimaryService. status = 1
    Dec 30 11:48:33 jupiter configd[16]:
    Dec 30 11:48:33 jupiter configd[16]: network configuration changed.
    Dec 30 11:48:33 jupiter configd[16]: SCNC Controller: ipv4_state_changed, done waiting for ServiceID.
    Dec 30 11:48:33 jupiter configd[16]:
    Dec 30 11:48:33 jupiter configd[16]: setting hostname to "jupiter"
    When connecting to my work-place it looks like:
    Dec 30 12:33:14 jupiter configd[16]: IPSec connecting to server <mycompanyismybusiness>.ch
    Dec 30 12:33:14 jupiter configd[16]: SCNC: start, triggered by SystemUIServer, type IPSec, status 0
    Dec 30 12:33:14 jupiter configd[16]: IPSec Phase1 starting.
    Dec 30 12:33:14 jupiter racoon[1976]: IPSec connecting to server 62.x.x.x
    Dec 30 12:33:14 jupiter racoon[1976]: Connecting.
    Dec 30 12:33:14 jupiter racoon[1976]: IPSec Phase1 started (Initiated by me).
    Dec 30 12:33:14 jupiter racoon[1976]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1).
    Dec 30 12:33:14 jupiter racoon[1976]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2).
    Dec 30 12:33:14 jupiter racoon[1976]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2).
    Dec 30 12:33:14 jupiter racoon[1976]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode).
    Dec 30 12:33:14 jupiter racoon[1976]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3).
    Dec 30 12:33:14 jupiter racoon[1976]: IPSec Phase1 established (Initiated by me).
    Dec 30 12:33:15 jupiter racoon[1976]: IPSec Extended Authentication requested.
    Dec 30 12:33:15 jupiter configd[16]: IPSec requesting Extended Authentication.
    Dec 30 12:33:21 jupiter configd[16]: IPSec sending Extended Authentication.
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Extended Authentication sent.
    Dec 30 12:33:21 jupiter racoon[1976]: IKEv1 XAUTH: success. (XAUTH Status is OK).
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Extended Authentication Passed.
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 12:33:21 jupiter racoon[1976]: IKEv1 Config: retransmited. (Mode-Config retransmit).
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Network Configuration requested.
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Network Configuration established.
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: receive success. (MODE-Config).
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration started.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = 10.100.1.18.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-MASK = 255.255.255.0.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: SAVE-PASSWORD = 1.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-DNS = 10.100.1.129.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: SPLIT-INCLUDE.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration: DEF-DOMAIN = iw.local.
    Dec 30 12:33:21 jupiter configd[16]: host_gateway: write routing socket failed, command 2, No such process
    Dec 30 12:33:21 jupiter configd[16]: installed route: (address 10.100.1.0, gateway 10.100.1.18)
    Dec 30 12:33:21 jupiter configd[16]: IPSec Phase2 starting.
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Phase2 started (Initiated by me).
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1).
    Dec 30 12:33:21 jupiter configd[16]: IPSec Network Configuration established.
    Dec 30 12:33:21 jupiter configd[16]: IPSec Phase1 established.
    Dec 30 12:33:21 jupiter configd[16]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.43.242), current interface setting (name: utun0, family: 1001, address: 10.100.1.18, subnet: 255.255.255.0, destination: 10.100.1.18).
    Dec 30 12:33:21 jupiter configd[16]: network configuration changed.
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: receive success. (Initiator, Quick-Mode message 2).
    Dec 30 12:33:21 jupiter racoon[1976]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3).
    Dec 30 12:33:21 jupiter racoon[1976]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode).
    Dec 30 12:33:21 jupiter racoon[1976]: IPSec Phase2 established (Initiated by me).
    Dec 30 12:33:21 jupiter configd[16]: IPSec Phase2 established.
    An earlies test in a Starbucks around here had the same result, during looking at the netstat -nr output I found I got onto a 10.x.x.x net on the Wifi and still could connect to the (different) 10.x.x.x net at work.
    My TCP/IP Networking course was around 2000, but the default route seen in the non-working log section looks like bullsh*t to me anyhow: DEFAULT-ROUTE = local-address 172.77.7.14/32
    On the other hand, the Phase 2 message seem to indicate a different mode for Phase 2 between the working and the non-working one.
    This is from the exported config of my AVM box:
    **** CFGFILE:vpn.cfg
    * /var/flash/vpn.cfg
    * Wed Dec 28 16:01:09 2011
    vpncfg {
            connections {
                    enabled = yes;
                    conn_type = conntype_user;
                    name = "[email protected]";
                    always_renew = no;
                    reject_not_encrypted = no;
                    dont_filter_netbios = yes;
                    localip = 0.0.0.0;
                    local_virtualip = 0.0.0.0;
                    remoteip = 0.0.0.0;
                    remote_virtualip = 172.77.7.14;
                    remoteid {
                            key_id = "<mykeyismybusiness>";
                    mode = phase1_mode_aggressive;
                    phase1ss = "all/all/all";
                    keytype = connkeytype_pre_shared;
                    key = "<mykeyismybusiness>";
                    cert_do_server_auth = no;
                    use_nat_t = no;
                    use_xauth = yes;
                    xauth {
                            valid = yes;
                            username = "<myuserismybusiness>";
                            passwd = "<mypasswordismybusiness>";
                    use_cfgmode = no;
                    phase2localid {
                            ipnet {
                                    ipaddr = 0.0.0.0;
                                    mask = 0.0.0.0;
                    phase2remoteid {
                            ipaddr = 172.22.7.14;
                    phase2ss = "esp-all-all/ah-none/comp-all/no-pfs";
                    accesslist =
                                 "permit ip 172.22.7.0 255.255.255.240 172.22.7.14 255.255.255.255";
            ike_forward_rules = "udp 0.0.0.0:500 0.0.0.0:500",
                                "udp 0.0.0.0:4500 0.0.0.0:4500";
    // EOF
    **** END OF FILE ****
    I also noticed an extra "IPSec port-mapping update for en1 ignored" message in the non-working log section, but I'm not sure a) how significant that might be, and b) how to find out what the ignored update might have been to decide whether not ignoring it would help.
    A quick test with the AnyConnect Client from Cisco didn't help either, apparently it establishes an https connection first as I got a window which certificate details from my QNAP behind the AVM Box (I got a port forward for https to it)
    So I'm looking for any ideas how to better troubleshoot this VPN issue...
    Many thanks in advance!
    BR,
    Alex

    Ok, found a small typo in my config (had at one point a 172.77.7.14 instead of the 172.22.7.14), no I can also connect from the 172.x.x.x net but still no ping etc. The relevant section of the log looks now like this:
    Dec 30 16:44:27 jupiter configd[16]: IPSec connecting to server <myservernameismybusiness>.dyndns.info
    Dec 30 16:44:27 jupiter configd[16]: SCNC: start, triggered by SystemUIServer, type IPSec, status 0
    Dec 30 16:44:28 jupiter configd[16]: IPSec Phase1 starting.
    Dec 30 16:44:28 jupiter racoon[2183]: IPSec connecting to server 77.x.x.x
    Dec 30 16:44:28 jupiter racoon[2183]: Connecting.
    Dec 30 16:44:28 jupiter racoon[2183]: IPSec Phase1 started (Initiated by me).
    Dec 30 16:44:28 jupiter racoon[2183]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 1).
    Dec 30 16:44:28 jupiter racoon[2183]: IKEv1 Phase1 AUTH: success. (Initiator, Aggressive-Mode Message 2).
    Dec 30 16:44:28 jupiter racoon[2183]: IKE Packet: receive success. (Initiator, Aggressive-Mode message 2).
    Dec 30 16:44:28 jupiter racoon[2183]: IKEv1 Phase1 Initiator: success. (Initiator, Aggressive-Mode).
    Dec 30 16:44:28 jupiter racoon[2183]: IKE Packet: transmit success. (Initiator, Aggressive-Mode message 3).
    Dec 30 16:44:28 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:44:28 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (ISAKMP-SA).
    Dec 30 16:44:28 jupiter racoon[2183]: IPSec Phase1 established (Initiated by me).
    Dec 30 16:44:28 jupiter racoon[2183]: IPSec Extended Authentication requested.
    Dec 30 16:44:28 jupiter configd[16]: IPSec requesting Extended Authentication.
    Dec 30 16:44:31 jupiter configd[16]: IPSec sending Extended Authentication.
    Dec 30 16:44:31 jupiter racoon[2183]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 16:44:31 jupiter racoon[2183]: IPSec Extended Authentication sent.
    Dec 30 16:44:32 jupiter racoon[2183]: IKEv1 XAUTH: success. (XAUTH Status is OK).
    Dec 30 16:44:32 jupiter racoon[2183]: IPSec Extended Authentication Passed.
    Dec 30 16:44:32 jupiter racoon[2183]: IKE Packet: transmit success. (Mode-Config message).
    Dec 30 16:44:32 jupiter racoon[2183]: IKEv1 Config: retransmited. (Mode-Config retransmit).
    Dec 30 16:44:32 jupiter racoon[2183]: IPSec Network Configuration requested.
    Dec 30 16:44:33 jupiter racoon[2183]: IPSec Network Configuration established.
    Dec 30 16:44:33 jupiter racoon[2183]: IKE Packet: receive success. (MODE-Config).
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration started.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-ADDRESS = 172.22.7.14.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration: SAVE-PASSWORD = 1.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration: INTERNAL-IP4-DNS = 172.22.7.1.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration: DEFAULT-ROUTE = local-address 172.22.7.14/32.
    Dec 30 16:44:33 jupiter configd[16]: host_gateway: write routing socket failed, command 2, No such process
    Dec 30 16:44:33 jupiter configd[16]: IPSec Phase2 starting.
    Dec 30 16:44:33 jupiter racoon[2183]: IPSec Phase2 started (Initiated by me).
    Dec 30 16:44:33 jupiter racoon[2183]: IKE Packet: transmit success. (Initiator, Quick-Mode message 1).
    Dec 30 16:44:33 jupiter configd[16]: IPSec Network Configuration established.
    Dec 30 16:44:33 jupiter configd[16]: IPSec Phase1 established.
    Dec 30 16:44:33 jupiter configd[16]: event_callback: Address added. previous interface setting (name: en1, address: 192.168.43.242), current interface setting (name: utun0, family: 1001, address: 172.22.7.14, subnet: 255.255.255.255, destination: 172.22.7.14).
    Dec 30 16:44:33 jupiter configd[16]: network configuration changed.
    Dec 30 16:44:33 jupiter racoon[2183]: IKE Packet: receive success. (Initiator, Quick-Mode message 2).
    Dec 30 16:44:33 jupiter racoon[2183]: IKE Packet: transmit success. (Initiator, Quick-Mode message 3).
    Dec 30 16:44:33 jupiter racoon[2183]: IKEv1 Phase2 Initiator: success. (Initiator, Quick-Mode).
    Dec 30 16:44:33 jupiter racoon[2183]: IPSec Phase2 established (Initiated by me).
    Dec 30 16:44:33 jupiter configd[16]: IPSec Phase2 established.
    Dec 30 16:44:43 jupiter racoon[2183]: IKE Packet: receive failed. (MODE-Config).
    Dec 30 16:44:48 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:44:48 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:44:48 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:44:48 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:44:48 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:45:03 jupiter configd[16]: setting hostname to "jupiter.local"
    followed by lots of:
    Dec 30 16:45:03 jupiter racoon[2183]: IKE Packet: receive failed. (MODE-Config).
    Dec 30 16:45:08 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:45:08 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:45:08 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:45:08 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:45:08 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:45:28 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:45:28 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:45:28 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:45:29 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:45:29 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:45:49 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:45:49 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:45:49 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:45:50 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:45:50 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:46:10 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:46:10 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:46:10 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:46:10 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:46:10 jupiter racoon[2183]: IKE Packet: receive success. (Information message).
    Dec 30 16:46:30 jupiter racoon[2183]: IKE Packet: transmit success. (Information message).
    Dec 30 16:46:30 jupiter racoon[2183]: IKEv1 Information-Notice: transmit success. (R-U-THERE?).
    Dec 30 16:46:30 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: request transmitted. (Initiator DPD Request).
    Dec 30 16:46:30 jupiter racoon[2183]: IKEv1 Dead-Peer-Detection: response received. (Initiator DPD Response).
    Dec 30 16:46:30 jupiter racoon[2183]: IKE Packet: receive success. (Information message).

  • FB4 beta 2 installation issues

    Hi,
    I am trying to install flashbuilder4_b2_win_100509.exe, and i keep getting 'Please select another location to extract the installer to' error. See the attached file. If i choose a different location is still get the same error dialog.
    I noticed that the installer temporarily extracts the files under C:\Documents and Settings\<user>\Local Settings\Temp\<I1257369022>. This has two directories InstallerData and Windows. I tried selecting FB4_Standalone.exe under the Windows directory, but that didnt help much.
    I read there could be some issues with java updates, not sure how true that is, i have Java 6 undate 11 installed.
    Any suggestions what i can do here? I have un-installed my previous flash builder 3 and 4 beta 1 versions, cleaned up registry files etc.
    Thanks,
    John

    Hi,
    I've seen this error happen occasionally if the temp folder gets too full, even if there's plenty of free disk space. I've been able to resolve it in the past by deleting old files from the tmp folder, and then emptying the recycle bin.
    Let us know whether or not this helps,
    -Chris

  • Dwarf Fortress Wine Issue

    It's been a while since I brought this up, but I'm still having this issue.
    Basically the issue comes down to some glib conflict with dwarf-fortress that I have had a good deal of trouble tracking down.
    Here's the error trace:
    (dwarfort.exe:10401): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libxfce.so: wrong ELF class: ELFCLASS64
    /usr/lib/gio/modules/libgiogconf.so: wrong ELF class: ELFCLASS64
    Failed to load module: /usr/lib/gio/modules/libgiogconf.so
    /usr/lib/gio/modules/libgioremote-volume-monitor.so: wrong ELF class: ELFCLASS64
    Failed to load module: /usr/lib/gio/modules/libgioremote-volume-monitor.so
    /usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64
    Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
    (dwarfort.exe:10401): Gtk-WARNING **: Error loading theme icon 'gtk-dialog-question' for stock: Unable to load image-loading module: /usr/lib/gtk-2.0/2.10.0/loaders/svg_loader.so: /usr/lib/gtk-2.0/2.10.0/loaders/svg_loader.so: wrong ELF class: ELFCLASS64
    (dwarfort.exe:10401): GLib-GObject-WARNING **: instance with invalid (NULL) class pointer
    (dwarfort.exe:10401): GLib-GObject-CRITICAL **: g_signal_handlers_destroy: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
    (dwarfort.exe:10401): GLib-GObject-WARNING **: instance with invalid (NULL) class pointer
    (dwarfort.exe:10401): GLib-GObject-CRITICAL **: g_signal_handlers_destroy: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
    (dwarfort.exe:10401): Gtk-WARNING **: Error loading theme icon 'gtk-dialog-info' for stock: Unable to load image-loading module: /usr/lib/gtk-2.0/2.10.0/loaders/svg_loader.so: /usr/lib/gtk-2.0/2.10.0/loaders/svg_loader.so: wrong ELF class: ELFCLASS64
    (dwarfort.exe:10401): GLib-GObject-WARNING **: instance of invalid non-instantiatable type `<invalid>'
    (dwarfort.exe:10401): GLib-GObject-CRITICAL **: g_signal_handlers_destroy: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
    (dwarfort.exe:10401): GLib-GObject-WARNING **: instance of invalid non-instantiatable type `<invalid>'
    (dwarfort.exe:10401): GLib-GObject-CRITICAL **: g_signal_handlers_destroy: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
    Using OpenGL output path with client-side arrays
    Ideal catalog size: 252x248
    In order to fix a separate PANGO32 problem, at least partially, I implemented the hack found here in case anyone is having trouble on this account. This does not seem to fix every issue with GTK, as you can read above. Does anyone know what might or does fix this issue?

    I'm not sure if there's a specific reason you're running through Wine, but you could always get one of the test releases from here. There's a native Linux version, among other fixes.
    Last edited by urist (2009-02-23 02:04:25)

  • Launching Aperture issues

    When I launch Aperture, it initializes by showing "opening Aperture library" but after a few seconds it stops and does not open the program.  How do I launch Aperture?  It worked before, not anymore.  I've downloaded latest updates, but still have issues.

    Allen,
    In response to your request, here's my iMac's information:
    Let me know if this helps....
      Model Name:          iMac
      Model Identifier:          iMac11,2
      Processor Name:          Intel Core i3
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per core):          256 KB
      L3 Cache:          4 MB
      Memory:          4 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          IM112.0057.B00
      SMC Version (system):          1.64f5
    Aperture:
      Version:          3.1.2
      Last Modified:          6/4/11 7:02 PM
      Kind:          Intel
      64-Bit (Intel):          Yes
      Get Info String:          Aperture 3.1.2, Copyright 2005-2011 Apple Inc.

  • Launching Win.Migration Assistant on Win.7 laptop to transfer files to new iMac

    I downloaded Windows Migration Assistant to my Win.7 O/S laptop so to transfer files to a new imac. The program is downloaded but when i enter "run" it won't launch. Also it is connected directly by ethernet to my new imac and both are on the same modem router system. The imac doesn't recognize the laptop. Anyone out there who may know what the problem is? Maybe there are too many virus or spyware blockers on my Win. 7 laptop(?)

    Shut down the machine, connect it via wire to the Internet modem, restart, and use the Setup Assistant to transfer from your other, but unidentified machine. See Pondini's Setup New Mac guide for details. Trying to do anything wirelessly is an exercise in futility, since it's the slowest of all transmission devices.

Maybe you are looking for

  • How to stream keynote presentation from ipad

    need help connecting my ipad to apple tv

  • Cannot see Xanté 8300 Postscript 2 Printer

    Just upgraded to Snow Leopard from 10.5.8. Now I cannot "see" my Xante 8300 printer. I downloaded and ran the most recent Xante Driver installer, but still does not show up. I am connected via ethernet and this is a B&W Level2 Postscript printer - it

  • SD( SAP ABAP )

    Please provide a report for list of invoices using tables VBAP, VBAK, VBRK, VBRP in which at the selection screen we enter values for sales order document no. and billing document no.

  • Duke's bookstore2 displays only one book title

    When I run Duke's bookstore2 from the Tutorial (Chapter 12: JavaServer Pages Technology: The Example JSP Pages), I'm not getting any error messages, but instead of seeing the graphical "Duke's Bookstore" heading followed by a horizontal line and "Ple

  • Dreamweaver and XHTML Strict

    This is a multi-part message in MIME format. ------=_NextPart_000_000E_01C73E2A.4BF5FFB0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi have dreamweaver mx 2004 and need to convert a site to XHMTL strict