Start a user group in Tennessee

I would like to start a user group in tennessee. I like to know if anyone is interested in joining or has any onformation about how to really get one started.
Thanks in advance.
Joe.
"NOTHING IS EVER EASY"

It's good to know your loved by your peers.
The funny thing is you are probably right although I do recall so idiots in LA, (Ainge fades back, he has a man open in the end zone, it's good.Give Him 6, Down go the tigers)
As for me I'm one of the smart dumb people from tennessee.
Joe.
"NOTHING IS EVER EASY"

Similar Messages

4.0.8.2.4 Cannot start listener after changing user/group to nobody/nobody

Installed OAS 4.0.8.2.4 and configured it. Everything is working fine with listener, plsql cartridge, Java cartridge and OSSWA. But if change listener's user/group from Oracle/Dba to nobody/nobody. Listener will not start. It hangs in as follows:
========================================================================
Information: Listening on NORM port 80 address 0.0.0.0
Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
Information: Adapter services initialized successfully
Information: The server started successfully
Server now running as process 15654
OWS-08850: Oracle Web Listener 'www' started.
Oracle Web Listener 4.0.8.2.4 Enterprise Edition - Release (Domestic)
Copyright (c) Oracle Corporation 2000. All rights reserved.
Information: Listening on NORM port 5502 address 0.0.0.0
Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
===========================================================================
from the message above, we can see if it failed to start the "Adapter services"
If we change the user/group back to Oracle/Dba, it starts fine.
And also, we have under $ORACLE_BASE/admin, the listener ( name devl ) permission has been changed accordingly to the user/group change. We follow the instruction from OAS configuration to change user/group.
( Read access to the configuration file
Read access to all files that provide content for servicing requests
Read access to all imagemap files
Execute access to all Oracle Application Server binaries and program files that the Web Listener must execute
Write access to the log and error files
Read access to user directories )
Thanks.

Thanks. After a few more days testing. We finally figure out where it went wrong. We changed user/group from node manager. ( from Oracle/dba, installer, to nobody/nobody). After that, we only changed $ORACLE_BASE/admin/ows/SITE_name/httpd-host_name/listener_name to be read and write accessed by nobody. We forgot to change owl.cfg to be read access to nobody/nobody. After we changed that. It starts fine.
Thanks again.

Can't start server -- Fatal error: Cannot connect to user group ldap server

After installing iCS 2.1, iCS 2.1p1, and iCS 2.1p3, a user will receive the
following error message when trying to start the server:
<P>
Fatal error: Cannot connect to user group ldap server.
<P>
In addition, the Directory Server access logs will contain the following
entry:
<P>
-0400] conn=125 op=1 SRCH base="dc=ldgw-llc,dc=com" scope=2
filter="(objectclass=People)"
In the server.conf file,
check the local.enduseradmindn
parameter. The parameter
should appear as follows:
<P>
uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot
<P>
If the parameter contains
"calmaster" or any user
other than "admin,"
change it to match the line above.

Hi,
I am getting the same error, kindly let me know how did you solved this problem
Thanks
Ahmad

Trash and user group help!

why do i need to type in password when i delete things? how do i remove it?
and i can't delete items directly from the dock as well. like opening from the downloads folder and dragging the file to trash. i have to bring open up Finder and delete from the folder directly.
another issue is that am i able to remove the gues user from my start up screen? i've already disabled it from the user groups but i still see it in my login screen.
one last problem, is it a norm to have current leakage for the MBP? i've been having frequent shocks from the 2 bottom corners of it when i plug it in to a power source. i bought it from an authorized retailer and using it in the country where i've gotten it from. i've just gotten my mbp about 3 weeks back.
thanks for replying my queries!

Hi,
Yeah in ACS 3.1 its under the Shared Profile Components page. In ACS 4.1 its directly under the user groups or under SPC page.
You need to check the box for "define ip based access restriction" and deny access for all other groups to the wireless access points network device group.
ACS 3.X)
1. Denied Calling/Point of access restrictions
2. AAA Clients =UPS_PDU (Power Supplies)
3. Port = just put a * for all
4. Src IP address = just put a * as well
SUBMIT to SAVE
Create a second one for the other group like so:
1. Denied Calling/Point of access restrictions
2. AAA Clients =Routers_Switches
3. Port = just put a * for all
4. Src IP address = just put a * as well
Click submit to save it.
Go to the ACS User groups section and select the Network Administrators Group " that don't need access to the UPS's" and apply the NAR you created to that group. Do the same for the other grouping.
(ACS 4.X)
Go directly under the "user groups" and create the NAR under there. No need to go under the Shared Profile Components section
Hope this helps and let me know if you need further assistance or explanation.
Craig

Pulling user/group field data from SharePoint list using REST, jQuery, Knockout.js Sharepoint 2013

I'm trying to make an interactive task board based on the task list app in SharePoint 2013. The task lisk includes fields like "Title","Description","Status","% Complete","Due Date","Assigned To",
etc. I used knockout.js to bind "Title","Description", and "Status" to my HTML controls. Here is some of the code:
var ViewModal = function(items, listname){
var self = this;
self.sortBy = ko.observableArray(sortBy);
self.tasks = ko.observableArray(items);
self.listname = ko.observable(listname);
self.auto = ko.observable(false);
self.getTasks = function() {
clearTimeout(self.getTasks);
// server relative url to REST service endpoint
var ajaxurl = _spPageContextInfo.webServerRelativeUrl + "/_vti_bin/listdata.svc/" + self.listname() + "?$orderby=PriorityValue";
$.ajax({
type: "GET",
url: ajaxurl,
contentType: "application/json; charset=utf-8",
dataType: "json",
cache: false,
processData: true,
success: function (data, status, xhr) {
if (status == "success" && data) {
ko.mapping.fromJS(data.d.results, mapping, self.tasks)
$(".task-item").draggable();
error: alert
if (self.auto()) {
setTimeout(self.getTasks, 10000);
<div class="tasks-column">
<div class="column-header">Not Started</div>

<div class="task-item">
<div class="view" data-bind="visible: !IsEditing()">
<button class="edit" data-bind="click: $root.editTask">edit</button>
<h2><span data-bind="text: Title"></span></h2>
<div data-bind="html: Description"></div>
<span data-bind="text: PriorityValue"></span>
</div>
<div class="edit" data-bind="visible: IsEditing">
<button class="save" data-bind="click: $root.saveTask">save</button>
<input type="text" data-bind="value: Title"></input>
</div>
</div>
I'm having trouble displaying the data from the "Assigned To" user/group field. I tried:
<span data-bind="text: AssignedTo"></span>
But it displays the field as [object Object]
I tried using $select/$expand
?$select=Title,AssignedTo/Id,Assignedto/Title&$expand=AssignedTo/Id,AssignedTo/T‌itle";
But it still returns the [object Object]

Hi,
Please use the REST URI below:
/_api/lists/getbytitle('ListName')/items?$select=Title,AssignedTo/ID,AssignedTo/Title&$expand=AssignedTo/ID,AssignedTo/Title
More information for your reference:
How to get User Details and User Group Details in SharePoint 2013 REST API with Knockout for SharePoint Js (KoSpJs)
http://www.ashokraja.me/post/How-to-get-User-Details-and-User-Group-Details-in-SharePoint-2013-REST-API-with-Knockout-for-SharePoint-Js-(KoSpJs).aspx
How to Get Login Name and Display Name using SharePoint 2013 REST API
https://www.nothingbutsharepoint.com/sites/devwiki/articles/pages/how-to-get-login-name-and-display-name-using-sharepoint-2013-rest-api.aspx
Best Regards
Dennis Guo
TechNet Community Support

Welcome to the new Oracle User Group Community

Welcome to the new Oracle User Group Community. Whether you landed here via the redirect from the previous community site - IOUC.org - or navigated here directly, welcome. This new platform brings new community features to enhance the way you connect with user group peers and with Oracle, as well as make it easier for you to find information through a more intuitive interface. We invite you to provide your feedback on the new site. Log in using your OTN Forum credentials and join the discussion here. If you do not yet have OTN Forum log in credentials, navigate to http://community.oracle.com/community, click on the "Register" link in the upper right corner of the page and create your account.
We look forward to hearing from you.

Hi Kashif,
Glad you like the new Community. Communication among user group leaders works a little differently on this site than on the previous site. Rather than having communication focus around e-mail distribution lists, communication now is focused within the site itself. The intent is that this will provide users the one place to come for information, rather than having to sort through lots of e-mail threads. That doesn't mean that e-mail is completely out of the picture though. Users can opt-in to receive e-mail notifications when an individual piece of content is changed, or when content is posted to a space. Look for the "Receive email notifications" link under "Actions" to start receiving notices. To stop receiving notices, go back to the same content/space and click "Stop email notifications".
Your Relationship Manager will be talking with you and the other leaders in your region over the next few days and weeks regarding how you and your group of leaders want to communicate.
Best regards,
Oracle User Group Team

OSMF Online-only User Group Meeting -- Edwin van Rijkom | TODAY Wed, Jan 20 @ 12:00 NOON PST

TODAY Wed, Jan 20 @ 12:00 NOON PST we are having the third meeting of the online-only OSMF User Group ( http://www.adobe.com/go/osmf_usergroup ).
The online-only OSMF User Group is pleased to have a live presentation on OSMF's new features by a developer from the OSMF Team, Edwin van Rijkom, Sr. Computer Scientist at Adobe. This meeting is open to all who are interested. Please forward notice about this meeting to all who you think may be interested.
The link for the online meeting room can be found in the meeting announcement link here:
http://groups.adobe.com/posts/3e8fddb492
Edwin will be reviewing changes and new features in OSMF delivered in Sprint 8 (released December), as well as providing an overview of new features in Sprint 9 (releasing next week).
Topics to be covered include:
API Refactoring Changes
Subclip Support
Live Streaming Support
Flash Media Manifest File Format (F4M) Support
Multi-BitRate (MBR) Streaming;
Digital Rights Management (DRM) via Flash Access,
Closed Captioning Plug-in
Pre-Assigned Durations
Edwin previously presented at the Adobe MAX 2009 conference as a co-presenter on the session entitled "Introduction to Adobe's Open Source Media Framework". Following is a link for a recording of Edwin's MAX Session (Edwin's portion starting at 24:00 in the recording timecode):
http://max.adobe.com/online/session/332
OSMF is an open source ActionScript 3 framework for building video and media players supporting cutting edge Flash Platform features for media delivery. If you have any curiosity about media players in Flash or Flex, this is a great forum for exploring and getting questions answered.
If you have an ongoing interest in this area, please join this group by logging in at groups.adobe.com/groups/7af970e6e4 and selecting the "JOIN THIS GROUP" link (red graphic on right side).
This online-only OSMF User Group meets regularly at this time and day of every month. That is the 3rd Wednesday of every month @ 12:00 NOON PST time. All meetings are recorded. Links for prior meeting recordings are on the group site in various places including on the group home page under the heading "Previous Connect Sessions".
Following are a few time zone conversions:
London: 8:00 PM to 9:30 PM GMT
Rome/Paris/Berlin: 9:00 PM to 10:30 PM CET
New York: 3:00 PM to 4:30 PM EST
Los Angeles: 12:00 NOON to 1:30 PM PST
Sydney: 7:00 AM to 8:30 AM EDT ** THURSDAY January 21 **

The presentation by Will Law was recorded and can be viewed online, on-demand from the following link:
http://experts.na3.acrobat.com/p47054887/
Will's presentation is an excellent introduction to HTTP Dynamic Streaming.
This presentation is a supersized version of a presentation that Will also will be delivering at Adobe MAX 2010. MAX session description here:
http://bit.ly/bh77Gz
Supersized in that in the recording above Will spent a bit more time in ActionScript for the OSMF developers in attendance than he will with more general audiences. Plus supersized in that Will took 1 hour 15 minutes (plus 15 minutes more on Q&A), whereas MAX sessions are 60 minutes, less a few minutes for the Q&A.,
hth,
g

How to only synchronize one specific LDAP user group with SAP?

Hi,
Hopefully this is the correct forum to post this in. I want to have continuous one-way synchronization of users from my LDAP server to my SAP central system. I've started configure in SAP using transaction SM59 and LDAP. Can I somewhere set that only one specific LDAP user group shall be transferred to SAP (they do not need to be assigned to any specific group, profile, role in SAP) - or should this be done on the LDAP server side (or is it at all possible)?
Correct me if I'm wrong, but the User Group field in the report RSLDAPSYNC_USER only concerns SAP user groups right? This would therefore not be sufficient since I want to select the users to synchronize based on user groups in the directory.
Thanks, Oscar

We've used a repository constant to specify the LDAP filter for reading users / groups from the LDAP target.
E.g. LDAP_FILTER_USERS (&(objectCategory=person)(objectClass=user))
Then we also have a constant for the LDAP_STARTING_POINT
For our AD Group Initial Load we filter according to these settings:
LDAP_FILTER_GROUPS = (objectclass=group)
LDAP_STARTING_POINT_GROUPS = ou=IDMManagedGroups,ou=Groups,dc=cfstest,dc=le,dc=ac,dc=uk
The above example only reads AD groups starting at the specified OU
Then in a Job From LDAP Pass the LDAP URL looks like this:
LDAP://%$rep.LDAP_HOST%:%$rep.LDAP_PORT%/%$rep.LDAP_STARTING_POINT_GROUPS%?*?SUB?%$rep.LDAP_FILTER_GROUPS%
I hope this helps
Paul

TFS says {oldaccount} is not a member of the Team Foundation Valid Users group, but I am

I'm trying to check in changes to TFS using VS2013. When I hit the submit button, TFS returns the following error, "TF14002: The identity {domain} \ {oldaccount} is not a member of the Team Foundation Valid Users group."
Background: my account name has been changed to {newaccount} from {oldaccount}. And when the sys-admins changed my account name they did not update my computer itself, so I'm still using C:\Users\{oldaccount}. I can't believe that would make a difference
but you never know....
When I first started working at this company I'm almost certain I set up my TFS Workspace with my old account. But I thought I deleted all that stuff related to my old account and reset everything to my new account (Workspaces and TFS server). My lead tech
has even shown me the account mgmnt screen with my new account name. And I've been able to check out items with my new account name.
I performed the following steps to try to "clean out" TFS:
• I copied all of my changed files to a back-up location.
• I undid all changes in TFS (note that TFS has been allowing me to check out files to edit).
• I deleted the TFS entry in Credential Manager per a suggestion online.
• I deleted my Workspace.
• I even deleted my TFS server.
• I Rebooted my computer.
• I reconnected to the TFS server.
• I rebuilt my Workspace.
• I restored my changed files from my back-up location.
At this point I tried checking-in my changes again but got the same error message as above.
Next, I deleted everything in this folder:
C:\Users\ ...\AppData\Local\Microsoft\Team Foundation\5.0\Cache
... but I'm still seeing the error.
Also, we'd been informed that a number of us need to downgrade from "Ultimate" to "Professional". I did my downgrade to VS2013 Pro (after the steps above) but I am still seeing the same error.
A comment on another question
here suggested that I shelve my changes without preserving changes locally, then un-shelve and attempt to check-in. This also did not work, I could shelve my changes and un-shelve, but doing so did not fix the original problem.
Note that I do NOT have access to the TFS server itself - much less permissions to perform any sort of admin on it (and I don't know the person who would) - but might there be a table in the TFS database that still has an entry for my old account that could
be joining to my computer name &/or new account name when TFS goes to look up my account info when I check in my changes? I am getting desperate for an answer!
Any suggestions?
Thanks,
D. Kelley

Hi D. Kelley,
Thanks for the details. Based on your description, you might need to change or update the SID for users. Try identity command to change the username if you never use the new username in TFS. Check this page for more information about
identities command in this
page.
You can also check the table "tbl_Identity" in the tfs_configuration database to see if the new user exists, or it has the old user. Another option is have a check on other machines to see if it works fine. Refer to links below for more information:
https://social.msdn.microsoft.com/Forums/en-US/93568425-a877-4d21-8497-1adc4561b6d3/unable-to-check-in-code-to-tfs-due-to-tf14002-the-identity-old-user-name-is-not-a-member-of-the?forum=tfsversioncontrol
https://social.msdn.microsoft.com/Forums/en-US/acc56859-624f-41bc-b698-cbb5e0b8f525/cant-check-in-code-the-identity-devoldusername-is-not-a-member-of-the-team-foundation-valid?forum=tfsversioncontrol
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to pass the User Group for a SQ00 Transaction iView

Hello,
To start off, I am relatively new to SAP technology in general. I may be missing something obvious.
I am trying to create an SAP Transaction iView in our EP Portal that will call the SQ00 transaction (start query) and run a particular query against our R/3 backend. I set the Transaction Code to: SQ00, the application parameters to: RS38R-QNUM=<my query> and the OK Code to: SHOW and the System to the System alias for our R/3 system.
My problem is that the query that I need to run is not in the default User Group that comes up by default. So I get a screen that has the query field (RS38R-QNUM) correctly populated but the error that the query has not been created. From that screen I can navigate to the correct User Group and then run query. There does not seem to be a User Group field on the screen, you change it by accessing a different menu, so I do not know how to call the screen for a particular User Group.
Is their an application parameter that I can initially pass to set the User Group?
Thank you.

And my lecturer is suck, every lectures she just read
the slices and never explains why and how they are.
(If ask her, she talks and talks rubbish and
eventually I get nothing)Maybe you should drop the class and complain to the administration.

Mac book pro Users & Groups deleting problems

I have a Macbook Pro, i believe its a 2008 15 inch, thats just come back from the repair shop.
I added another user (through Users and Groups) changed the settings so that person was the admin and deleted the original user.
Now after roughly an hour it is still saying that it is "deleting user" and if i try to close the window it says -
"System Preferences is busy and can't be closed. Users & Groups preferences is removing a user account and saving the Home Directory to a disk image"
How do i get about this? i do not want it frozen there, is that a way i can cancel all and start again or get it to hurry up and delete?
Thanks

You asked it to save the old User's files, and it is converting them to a Disk Image.
What you asked for is complex, and it will take some time.

SAP Query, user groups, revoking 'change' rights

Hi,
I have a problem regarding SAP Queries and revoking the change rights. This is what I have done:
1. Created the new user group in SQ03
2. Created the new InfoSet (SQ02), assigned it to the above UG (SQ03)
3. Created the new user, assigned it to the UG in SQ03 and removed the Change checkbox (revoke change rights)
4. Logged on as the new user
5. Started SQ01, switched user group to the new one
6. Created the new SAP query based on the new InfoSet, run the query
As I understand the principles of user groups and queries, I wasn't supposed to be allowed to do the step 6 as the new user, as it was revoked the change rights. Why wasn't I stopped?
I searched for reply in previous posts - everybody agrees on principles, but I didn't find explanation on why it doesn't work.
Thanks in advance!
KR,
Igor

The table AQGDBBN seems to display a mapping of User Group with use rindeed but the results are less than the actual assignment. And the mapping does not have the Z query usergroups that have users assigned in SQ03.
Anything that I may be missing?
Thanks,
Kashif

How to change user group of a query (sq01)

Hi,
I'm working with SAP Queries (SQ01) and I don't know how can I change the user group assignation of a query. We did only one user group for all users and queries and know in order to arrange it a bit we've created three user groups.
We know how to assign users to new user groups but for each query of the old group we neet to move it to one of the new user groups, how could we do this?
thanks in advance

Hi
pls go through these links
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same

LDAP user groups not visible for configuring a Group Portal

Hi,
We have created a Custom Security Realm(myRealm) on WebLogic 7.0 SP2 in which
I've added the Novell LDAP Authentication provider as the authentication provider
and then set "myRealm" as the default realm for the domain. I am able to start
the WLS server instance and login to portalAppTools with the "administrator" account.
We would like to configure a Group Portal. In Portal Administration interfaces,
when I click on Group Administartion, I am unable to see any of my external LDAP
groups. I know that we cannot create/delete users or groups in the external LDAP
repository thru the Admin UI but the documentation says that I should be able
to view the users/groups in the Admin UI. Authentication against the external
LDAP repository works fine. Can anybody suggest the reason why we are unable to
view any of the Users or Groups in our external LDAP repository thru the User
Administration interfactes.
Appreciate any feedback.
Thanks
Vikram

Hi Jim,
I've configured a default LDAP V2 Compatibility Realm by modifying the Config.xml
file. I was able to restart Weblogic and see the LDAP Groups and Users thru the
WLS console. In our project we've a unique requirement wherein all Application
Groups and User Accounts would be stored in an LDAP repository and all BEA SERVICE
level accounts and groups are stored in a Database (groups like AdminEligible,
Administrators etc.). We need to be able to look at the groups in both the Database
and LDAP repositories in order to administer and configure a Group Portal. On
the outset it looks like we will not be able to do what we want to with the current
portal framework. Please suggest if there are any alternatives in order to implement
this solution. I am sure there are lot of other Clients who cannot create groups
like Administrators, AdminEligible etc in their LDAP repositories and will be
forced to think of alternatives.
I would appreciate if you can reply back at your earliest convenience.
Thanks
Vikram
Jim Litton <replyto@newsgroup> wrote:
The Weblogic 7.0 Authentication Providers (new JAAS Framework) is not
supported with Portal 7.0. You will need to configure the Compatibility
Security CustomRealm for Novell to try to get Portal working.
see defaultLDAPRealmForNovellDirectoryServices at
http://e-docs.bea.com/wls/docs61/adminguide/cnfgsec.html#1083149
In addition, remember to test functionality through the Weblogic
Console. If you can see groups and users there okay it is very likely
that Portal will operate.
-- Jim
Vikram wrote:
Hi,
We have created a Custom Security Realm(myRealm) on WebLogic 7.0 SP2in which
I've added the Novell LDAP Authentication provider as the authenticationprovider
and then set "myRealm" as the default realm for the domain. I am ableto start
the WLS server instance and login to portalAppTools with the "administrator"account.
We would like to configure a Group Portal. In Portal Administrationinterfaces,
when I click on Group Administartion, I am unable to see any of myexternal LDAP
groups. I know that we cannot create/delete users or groups in theexternal LDAP
repository thru the Admin UI but the documentation says that I shouldbe able
to view the users/groups in the Admin UI. Authentication against theexternal
LDAP repository works fine. Can anybody suggest the reason why we areunable to
view any of the Users or Groups in our external LDAP repository thruthe User
Administration interfactes.
Appreciate any feedback.
Thanks
Vikram

Who wants to chat/IM and form a user group ?

Ok I think it would be nice to add each other so we can get more support etc via IM.
I will start: My googletalk ID is [email protected] feelfree to add me !
You can use Adium for all the main IM clients....

Great ! whats your ID ??
Why wouldn't you use iChat and make use of your MBP's coolest features, like a microphone and camera?
CZ
iMac G5, Dual Core Mini, MBPro Mac OS X (10.4.6) Support your local Mac Users Group!

Start a user group in Tennessee

Similar Messages

Maybe you are looking for