Start another instance

I have upgraded to Firefox 7 and now when I start Firefox with my shortcut on Vista it starts. But when I want to start another copy (instance) of Firefox, nothing happens. With Firefox 5 it was working?
The strange thing is that if I do that, first copy of Firefox is nuable to close. It is not visible when I close it, but it remains in processes so I can't start Firefox again. I must kill it in Task manager first.

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs
*http://kb.mozillazine.org/Browser_will_not_start_up

Similar Messages

How to start another instance in oracle database 10g

Hi,
i have created another database on linux Enterprise Server 5 with SID name "rmann". after database is created the address is "http://linux:5500/em"
Now after that i run the address link it works fine. but when i restarted the computer run the address link http://linux:5500/em doen't run.
So how i can run the new address link
Thanks
Sohail

Sohail wrote:
Hi,
i have created another database on linux Enterprise Server 5 with SID name "rmann". after database is created the address is "http://linux:5500/em"
Now after that i run the address link it works fine. but when i restarted the computer run the address link http://linux:5500/em doen't run.
So how i can run the new address link You mean that after the restart of teh machine, EM doesn't work? Did you check that whether the service of the EM is running or not?
emctl status dbconsoleIf it shows that the EM is not running then you must start teh service using,
emctl start dbconsoleAnd also check that you are not using DHCP, in case of which EM would keep on crashing since the IP would be changed all the time. For this, you must ensure that you configured EM using a static IP only.
HTH
Aman....

CodeCoach bug - loads another instance of JDeveloper9i

Hi,
I'm getting some strange behaviour when using code coach. Basically, it's starting another instance of JDeveloper9i (so that I have 2 running concurrently) while it's "waiting for results".
I'm running on NT4, with JDev9i 9.0.2.8.2
I have an addin project (ProjectSettings.jpr) and have run code coach against the file ConfigProjectSettings.java. This leads to the output (see below) in the log window.
Simultaneously another JDeveloper9i starts up and appears to stop code coach in its tracks - the msg "waiting for results" is displayed and the JDev just sits there.
I kill the interloper JDeveloper and code coach immediately returns with its results. It even reports on errors in files that it reports don't exist (pretty neat feature!).
Any ideas what's going on here?
Eddie
Target ConfigProjectSettings.java is not runnable, using default target ProjectSettingsAddin.java.
X:\Program Files\Oracle\JDeveloper9i\jdk1.3\bin\javaw.exe -ojvm -X5codecoach -Xcc:new -Xcc:port:4422 -Xcc:level:4 -Xcc:disable:ALL -Xcc:enable:ALL -Xcc:excl:com;java;javax;sun;sunw;org;oracle -classpath X:\Program Files\Oracle\JDeveloper9i\jdev\myprojects\samples\classes;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jdev.jar;C:\ant\jakarta-ant-1.4.1\lib\ant.jar;C:\ant\jakarta-ant-1.4.1\lib\crimson.jar;C:\ant\jakarta-ant-1.4.1\lib\jaxp.jar;C:\ant\jakarta-ant-1.4.1\lib\jakarta-ant-1.4.1-optional.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\classes;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jdev.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\xmleditor.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\xmladdin.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ojc.jar;X:\Program Files\Oracle\JDeveloper9i\lib\xmlparserv2.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jgl3.1.0.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jdev-rt.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\jewt4-nls.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\jewt4.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\share.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\help4-nls.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\help4.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\inspect4-nls.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\inspect4.jar;X:\Program Files\Oracle\JDeveloper9i\vbroker4\lib\vbjorb.jar;X:\Program Files\Oracle\JDeveloper9i\javavm\lib\aurora.zip;X:\Program Files\Oracle\JDeveloper9i\jdbc\lib\classes12.jar;X:\Program Files\Oracle\JDeveloper9i\jdbc\lib\nls_charset12.jar;X:\Program Files\Oracle\JDeveloper9i\jdk\lib\tools.jar;X:\Program Files\Oracle\JDeveloper9i\jdk\lib\dt.jar;X:\Program Files\Oracle\JDeveloper9i\j2ee\home\lib\ojsp.jar;X:\Program Files\Oracle\JDeveloper9i\j2ee\home\lib\ojsputil.jar;X:\Program Files\Oracle\JDeveloper9i\jsp\lib\ojspicons.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\oracle_ice5.jar;X:\Program Files\Oracle\JDeveloper9i\sqlj\lib\translator.jar;X:\Program Files\Oracle\JDeveloper9i\sqlj\lib\runtime12.jar;X:\Program Files\Oracle\JDeveloper9i\lib\servlet.jar;X:\Program Files\Oracle\JDeveloper9i\lib\mts.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\regexp.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\xml-javadoc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\web_services.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\using_webdav.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\using_source_control.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\uix_devguide_ohj.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\uixref.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\uix2-javadoc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\tutorials.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\soapjavadoc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\share-doc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\servlet-2_3-docs.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\prog_and_admin_db.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\packaging_deploying.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\overview.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\ohguide.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\jewt-public-doc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\jdk13doc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\jdeveloper_modeling.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\jdeveloper.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\jdev-scm-doc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\jdev-doc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\jdbc-javadoc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\getting_started.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\f1_web_services.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\f1_using_webdav.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\f1_using_source_control.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\f1_packaging_deploying.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\f1_jdeveloper_modeling.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\f1_compiling_debugging.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\f1_bc.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\extending_jdev.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\developing_javabeans.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\developing_gui_clients.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\developing_ejb.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\developing_bc_projects.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\dacf-doc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\creating_html_clients.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\compiling_debugging.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\codecoach_profiler.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\bc4jjavadoc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\bc4jim-doc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\bc4jdomorcldoc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\doc\ohj\bc4jdomgnrcdoc.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\xml4j.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\velocity-dep-1.2.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\toolmanager.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\templatemaker.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\SqlIo.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\SampleTwo.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\SampleThree.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\library_jar.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\junit.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\jdwebdav.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\JDevelopperJunit.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\fsbrowser.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\doclinks.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\DirDiffs.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\dav4j.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\console.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\autobrace.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\antman.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\AllSamples.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\AddinUtils.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ext\AddinTools.jar;X:\Program Files\Oracle\JDeveloper9i\soap\lib\soap.jar;X:\Program Files\Oracle\JDeveloper9i\j2ee\home\lib\http_client.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\jssl-1_2.jar;X:\Program Files\Oracle\JDeveloper9i\j2ee\home\oc4j.jar;X:\Program Files\Oracle\JDeveloper9i\lib\xmlcomp.jar;X:\Program Files\Oracle\JDeveloper9i\forms90\java\f90all.jar;X:\Program Files\Junit\junit3.7\junit\junit.jar;C:\velocity\velocity-1.3-rc1\velocity-1.3-rc1.jar;X:\Program Files\Oracle\JDeveloper9i\lib\ext\SampleThree.jar;C:\NetComponents-1.3.8a\NetComponents.jar;X:\Program Files\Oracle\JDeveloper9i\classes;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\bc4jdt.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\lib\bc4jmt.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\jlib\bc4jmtvb.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\jlib\bc4jtester.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\lib\bc4jct.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\lib\bc4jdomorcl.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\lib\collections.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\lib\bc4jhtml.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\jlib\bc4jui.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\jlib\dacf.zip;X:\Program Files\Oracle\JDeveloper9i\jdev\infobus\lib\infobus.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\LW_PfjBean.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\lib\datatags.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\lib\uixtags.jar;X:\Program Files\Oracle\JDeveloper9i\BC4J\lib\bc4juixtags.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\sax2.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\uixdev2.jar;X:\Program Files\Oracle\JDeveloper9i\jlib\uix2.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\uixaddin.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\batik-awt-util.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\batik-dom.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\batik-ext.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\batik-svggen.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\batik-transcoder.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\batik-util.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\batik-xml.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jr_cws.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jr_dep.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jr_ia.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jr_diff.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jr_vhv.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jr_jol.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jr_cmd.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jr_file.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\dav4j.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\xml4j.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\modelers.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\ebiadapters.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jdscm.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jdwebdav.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jdebi.jar;X:\Program Files\Oracle\JDeveloper9i\jdev\lib\jdukshare.jar -DAntMan.JDevHome=X:/Program Files/JDeveloper9i -Xverify:none -Xmx512M -Dsun.java2d.noddraw=true -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -Dice.browser.forcegc=false -Dcom.apple.macos.useScreenMenuBar=true -Dreserved_filenames=con,aux,prn,lpt1,lpt2,lpt3,lpt4,lpt5,lpt6,lpt7,lpt8,lpt9,com1,com2,com3,com4,com5,com6,com7,com8,com9,conin$,conout$ -Djava.library.path=D:\ORACLE\ora9i\bin oracle.ideimpl.IdeMain
java.lang.NoClassDefFoundError: borland/jbuilder/addin/VersionedAddin
     java.lang.Class java.lang.ClassLoader.defineClass0(java.lang.String, byte[], int, int, java.security.ProtectionDomain)native code
     java.lang.Class java.lang.ClassLoader.defineClass(java.lang.String, byte[], int, int, java.security.ProtectionDomain)
          ClassLoader.java:486
     java.lang.Class java.security.SecureClassLoader.defineClass(java.lang.String, byte[], int, int, java.security.CodeSource)
          SecureClassLoader.java:111
     java.lang.Class java.net.URLClassLoader.defineClass(java.lang.String, sun.misc.Resource)
          URLClassLoader.java:248
     java.lang.Class java.net.URLClassLoader.access$100(java.net.URLClassLoader, java.lang.String, sun.misc.Resource)
          URLClassLoader.java:56
     java.lang.Object java.net.URLClassLoader$1.run()
          URLClassLoader.java:195
     java.lang.Object java.security.AccessController.doPrivileged(java.security.PrivilegedExceptionAction, java.security.AccessControlContext)
          native code
     java.lang.Class java.net.URLClassLoader.findClass(java.lang.String)
          URLClassLoader.java:188
     java.lang.Class java.lang.ClassLoader.loadClass(java.lang.String, boolean)
          ClassLoader.java:297
     java.lang.Class sun.misc.Launcher$AppClassLoader.loadClass(java.lang.String, boolean)
          Launcher.java:286
     java.lang.Class java.lang.ClassLoader.loadClass(java.lang.String)
          ClassLoader.java:253
     java.lang.Class java.lang.ClassLoader.loadClassInternal(java.lang.String)
          ClassLoader.java:313
     java.lang.Class java.lang.Class.forName0(java.lang.String, boolean, java.lang.ClassLoader)
          native code
     java.lang.Class java.lang.Class.forName(java.lang.String)
          Class.java:120
     boolean oracle.ide.AddinManager._registerAddin(java.lang.String, boolean)
          AddinManager.java:536
     void oracle.ide.AddinManager.initAddins(java.util.Properties, java.lang.String, boolean)
          AddinManager.java:715
     void oracle.ide.AddinManager.initAddins(java.util.Properties, boolean)
          AddinManager.java:694
     void oracle.ide.AddinManager.initProductAndUserAddins()
          AddinManager.java:287
     void oracle.ide.Ide.initProductAndUserAddins()
          Ide.java:1147
     void oracle.ide.Ide.startupImpl(oracle.ide.IdeArgs)
          Ide.java:1839
     void oracle.ide.Ide.startup(oracle.ide.IdeArgs)
          Ide.java:1544
     void oracle.ideimpl.IdeMain.main(java.lang.String[])
          IdeMain.java:33

Liz,
Thanks for your quick response.
Re: 'interloper' JDeveloper - I really should RTFM more often. Apologies.
Re: ClassNotFoundException (borland.jbuilder.addin.VersionedAddin) - I'm actually running one of the Extension Exchange samples, so it would appear the dependency is either within that code (I've had quick look at the inports/extends but can see nothing Borland) or within the IDE itself.
Cheers,
Eddie.
Ps - is there a way to print out the code coach diagnostics? In TogetherSoft they can be saved as text/html, etc, which is pretty useful.
Eddie,
Target ConfigProjectSettings.java is not runnable, using default target ProjectSettingsAddin.java.Your file ConfigProjectSettings.java is not runnable. This means that JDeveloper does not know how to run it because it is not an application (an application has a main method), it is not a servlet, it is not a JSP, it is not an Addin, etc.
Because ConfigProjectSettings.java is not runnable, JDeveloper will use the target ProjectSettingsAddin.java because this has been set as the Default Run Target in your project. To change this, go to Project Settings dialog, on the Runner panel.
When you run/debug/profile/codecoach a project where the target of the project is an Addin, JDeveloper automatically starts up another instance of JDeveloper so you can run/debug/profile/codecoach your addin.
This is similar to how JDeveloper automatically starts OC4J when you run/debug/profile/codecoach a project where the target of the project is a JSP, servlet, or EJB.
So, the "interloper" JDeveloper is not an interloper really, it is supposed to be there.
One thing to be aware of... When JDeveloper starts up the second instance of JDeveloper it uses the Project's Run Directory (specified in Project Settings dialog, on the Runner Panel) as the user home directory for second instance of JDeveloper.
As when you are codecoaching any project, codecoach reports the results when the program being codecoached exits. So, when you close the "interloper" JDeveloper, codecoach reports the results.
java.lang.NoClassDefFoundError: borland/jbuilder/addin/VersionedAddin Some addin (possibly the addin that you are writing) is using (or extending or implementing) borland.jbuilder.addin.VersionedAddin. I think that was the Addin interface for JDev 3.2. The Addin interface for Oracle9i JDeveloper is oracle.ide.addin.Addin. If you debug instead of codecoach, the debugger will stop at the uncaught exception and you can look in the stack window and try to figure out which addin is causing the exception.
-Liz

Tried to upgrade from firefox 3.6.2 to 3.6.3, error message says another instance of firefox is running, then 3.6.2 opens. This occurs when i start firefox after restarting the computer, or when i try to install the upgrade

Whenever i try to open firefox, i get a message that firefox cannot install the upgrade because another instance of firefox is running. Then firefox 3.6.2 will start. running windows 7 64 bit. This will occur every time i try to open firefox, after rebooting or any time i close it and reopen firefox.
== This happened ==
Every time Firefox opened
== I Ok'd the upgrade from 3.6.2 to 3.6.3

Do a clean (re)install and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Another instance of distiller is busy starting up. This instance cannot continue.

"Another instance of distiller is busy starting up. This instance cannot continue." This message keeps coming up after boot time. CS5 + Windows 7. Why?

I did your recommendation and let me say that issue persists in the new fresh installation. Other issue that I can see is that Acrobat is installed twice, as you can see in the Programs and Features panel, on the Control Panel. I'm using Windows 8.1 x64 with all Adobe CC 2014 products.
The problem is that uninstalling any Acrobat version (or row), Adobe Acrobat is uninstalled fully.
Other issue detected with multiples instances is related to the Adobe CEF Helper application. This application appears, three or four times in the Task Manager.
Really annoying this issue.
Regards
César Qüeb

Re-start message on another instance

Hi.
Our PI system has two instances, central instance and dialog instance.
If the instance shuhtdown occured caused by any hardware trouble, during processing message on central instance,
can I re-start the message processing on another instance(i mean dialog instance)?
In this case, database running well.
the question is
processing on sender adapter(JAVA) on central instance
u2192can i re-start from dialog instance?
processing on integratio engine(ABAP) on central instance
u2192can i re-start from dialog instance?
regards,

Thank you or your replying.
How about "lock" ?
Should I install Enqueue Replication Server(ESR) for PI?
During the processing the message, message and related table should be locked.
If the lock information were lost on original host(trouble is occurred), does the inconsistent occurred cause by re-start message on another host ?regards

Instance starting with profile of another instance

Hi,
For PRD we have 2 host for load balancing.On 1st CI+DB & aaplication instance,on 2nd 2 application instances[D01 & DVEBMGS00].The instance DVEBMGS00 on 2nd host while starting taking the profile of instance on 1st host.But when checked in RZ03 it's not started. Here is th RZ03 screeshot.
Server Name            Services              Status          Configuration alerts
sapp3p01_P3P_00        DVEBMGS      Active
sapp3p02_P3P_00                               Not active
sapp3p02_P3P_01        DS                   Active          Work processes differ
Kindly suggest to start the instance.
Thanks & Regards,
Sam

Hello,
Here are the logs of startsap_DVEBMGS00.log
Called command: /usr/sap/P3P/SYS/exe/run/startsap
Starting SAP Instance DVEBMGS00
SAP-R/3-Startup Program Rel 640 V1.8 (2003/04/24)
Starting at 2010/04/22 09:09:38
Startup Profile: "/usr/sap/P3P/SYS/profile/START_DVEBMGS00_sapp3p02"
Execute Pre-Startup Commands
(21657) Local: /usr/sap/P3P/SYS/exe/run/sapmscsa -n pf=/usr/sap/P3P/SYS/profile/P3P_DVEBMGS00_sapp3p01
/usr/sap/P3P/SYS/exe/run/sapmscsa: SCSA is attached and useable.
/usr/sap/P3P/SYS/exe/run/sapmscsa: finished.
(21657) Local: rm -f ms.sapP3P_DVEBMGS00
(21657) Local: ln -s -f /usr/sap/P3P/SYS/exe/run/msg_server ms.sapP3P_DVEBMGS00
(21657) Local: rm -f dw.sapP3P_DVEBMGS00
(21657) Local: ln -s -f /usr/sap/P3P/SYS/exe/run/disp+work dw.sapP3P_DVEBMGS00
(21657) Local: rm -f co.sapP3P_DVEBMGS00
(21657) Local: ln -s -f /usr/sap/P3P/SYS/exe/run/rslgcoll co.sapP3P_DVEBMGS00
(21657) Local: rm -f se.sapP3P_DVEBMGS00
(21657) Local: ln -s -f /usr/sap/P3P/SYS/exe/run/rslgsend se.sapP3P_DVEBMGS00
Starting Programs
(21685) Starting: local ms.sapP3P_DVEBMGS00 pf=/usr/sap/P3P/SYS/profile/P3P_DVEBMGS00_sapp3p01
(21686) Starting: local dw.sapP3P_DVEBMGS00 pf=/usr/sap/P3P/SYS/profile/P3P_DVEBMGS00_sapp3p01
(21687) Starting: local co.sapP3P_DVEBMGS00 -F pf=/usr/sap/P3P/SYS/profile/P3P_DVEBMGS00_sapp3p01
(21688) Starting: local se.sapP3P_DVEBMGS00 -F pf=/usr/sap/P3P/SYS/profile/P3P_DVEBMGS00_sapp3p01
(21657) Waiting for Child Processes to terminate.
Instance on host sapp3p02 started
I'm starting with command    startsap r3 DVEBMGS00
Regards,
Sam

Failed to initialize the network. Check if another instance of agent is

Out of the blue a small number of my Windows XP PCs get the following error
when logging in. Usually appears while login script page is on screen:-
Failed to initialize the network. Check if another instance of agent is
running. Contact the system administrator
Once XP has loaded ok I can manually start the Remote Management service.
Some PCs are intermittent and don't seem to get it again but a couple get it
every login. I removed the client and reinstalled. I removed the Remote
Management service and re-installed. Re-registered the PC Workstation but no
change for those who get it every day.
I did find this:-
Failed to initialize the network. Check if another instance of agent is
running. Contact the system administrator
Source: Remote Management Agent
Severity: Critical
Possible Cause: The Remote Management Agent is unable to bind to the IPX or
IP port that is being used for Remote Management service, or the ports are
being used by some other application running on the managed workstation.
Action: Uninstall any third-party remote control agent or remote control
application using these ports from the managed workstation.
Possible Cause: The protocol stack is corrupted.
Action: Reinstall the protocol stack.
Possible Cause: The managed workstation is not connected to the network, or
the network is down.
Action: Connect the managed workstation to the network.
I don't have any third party remote control agent installed and I've tried
the refresh of the IP protocol stack. Surprised this has started as we have
not made any changes to the network or software. We run NW Client 4.83sp1
and NW5.1 sp5.
Anybody else had this and cleared it completely?

Further developments:
It looks like it's a fault in the nic. it's a Compaq NC3120 Fast Ethernet
card. It used to work, but since I've wiped out the card drivers that were
in use, I'm at HP's mercy. They are telling me that the card is no longer
under warranty and won't even tell me what driver to look for. Anything I've
managed to find has the exact same symptoms:
Client works, ping to IP addresses work, ping to www.yahoo.com (etc) doesn't
work, although winipcfg shows a DNS server the same as every other machine I
have.
Internet explorer doesn't work, even with IP addresses to local servers.
And of course, zenrc32 doesn't work, wsreg32 doesn't work.
Does anyone know of a way of making the NC3120 work on a win98 machine?
Shall I just go buy a couple dozen netcards from a more reputable company
than compaq?
Chris Denby
IT Coordinator
Rainy River District School Board
Fort Frances, Ontario
Canada
"Chris Denby" <[email protected]> wrote in message
news:[email protected]...
> I have this message on windows 98. In addition to that, the wsreg32.log
> reads work station import error -1 (UNKNOWN).
> This happened after ghosting down to the machine and finding that it had a
> different card. The client adapted easily to a new card, but the
zenrc32.exe
> won't run.
>
> I've checked to make sure it wasn't running by renaming the zenrc32.exe to
> zenrc32.ex so it wouldn't run on start up. Then after the machine was
> started up, I changed it back and ran it and it died immediately with the
> same error.
>
> I have uninstalled the client through admin\unc32 and removed all traces
of
> the client then reinstalling, but no luck.
>
>
> <[email protected]> wrote in message
> news:1XuQc.3739$8%[email protected]...
> > Did you ever get this solved?
> > I've got the same thing going on with one Win2000 machine in my
> > department. He can log into the network just fine but can not get to the
> > internet.
> > I've tried re-installing the protocol stack; no luck. I've searched hi
and
> > low for any other agent running on the machine with no luck. I've
searched
> > the registry for hours for all keys that would start programs or agents
at
> > start. Can't find anything. I've check for services, checked for fire
wall
> > problems, viruses. No luck. Since its only one machine I can re-image it
> > with no problem, but I'm curious and want to find out whats going on in
> > case the problem reapears or grows to other machines.
> > Any help out there???
> >
> > > Out of the blue a small number of my Windows XP PCs get the following
> > error
> > > when logging in. Usually appears while login script page is on
screen:-
> > >
> > > Failed to initialize the network. Check if another instance of agent
is
> > > running. Contact the system administrator
> > >
> > > Once XP has loaded ok I can manually start the Remote Management
> service.
> > > Some PCs are intermittent and don't seem to get it again but a couple
> > get it
> > > every login. I removed the client and reinstalled. I removed the
Remote
> > > Management service and re-installed. Re-registered the PC Workstation
> > but no
> > > change for those who get it every day.
> > >
> > > I did find this:-
> > >
> > > Failed to initialize the network. Check if another instance of agent
is
> > > running. Contact the system administrator
> > >
> > > Source: Remote Management Agent
> > >
> > > Severity: Critical
> > >
> > > Possible Cause: The Remote Management Agent is unable to bind to the
IPX
> > or
> > > IP port that is being used for Remote Management service, or the ports
> > are
> > > being used by some other application running on the managed
workstation.
> > >
> > > Action: Uninstall any third-party remote control agent or remote
control
> > > application using these ports from the managed workstation.
> > >
> > > Possible Cause: The protocol stack is corrupted.
> > >
> > > Action: Reinstall the protocol stack.
> > >
> > > Possible Cause: The managed workstation is not connected to the
network,
> > or
> > > the network is down.
> > >
> > > Action: Connect the managed workstation to the network.
> > >
> > > I don't have any third party remote control agent installed and I've
> > tried
> > > the refresh of the IP protocol stack. Surprised this has started as we
> > have
> > > not made any changes to the network or software. We run NW Client
> 4.83sp1
> > > and NW5.1 sp5.
> > >
> > > Anybody else had this and cleared it completely?
> > >
> > >
> > >
> > >
> > >
> >
>
>

Error when starting oracle instance

Hi,
today, after a lot of trouble, I was able to install oracle 10.2.0.1 on redhat as 4 upd 2 x86_64.
This link helped me so much http://www.puschitz.com/InstallingOracle10g.shtml help.
I met a link error because of binutils version. After I installed binutils-2.15.92.0.2-15.0.0.0.2.x86_64.rpm (my version was binutils-2.15.92.0.2-15.0.0.0x86_64.rpm), I did retry and the install problem was solved.
Then during dbca I met another error (ORA-12547: TNS:lost contact) because of libaio. I had 32 bit version instead of 64 bit. After the package update dbca run successfully.
I'm facing the following problem during instance startup:
"Thu Apr 19 17:40:17 2007
Errors in file /oracle/admin/UAT/udump/uat_ora_2697.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15"
I told you those things about installation phase because maybe this error is related to the install (maybe something went wrong without I know it).
Error in trace is:
/oracle/admin/UAT/udump/uat_ora_2697.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning and Data Mining options
ORACLE_HOME = /oracle/10gR2
System name: Linux
Node name: uatlxora1.bw-ita.it
Release: 2.6.9-22.EL
Version: #1 Mon Sep 19 17:49:49 EDT 2005
Machine: x86_64
Instance name: UAT
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 2697, image: [email protected] (TNS V1-V3)
*** SERVICE NAME:(SYS$USERS) 2007-04-19 17:40:17.788
*** SESSION ID:(104.3) 2007-04-19 17:40:17.788
Error in executing triggers on database startup
*** 2007-04-19 17:40:17.789
ksedmp: internal or fatal error
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
The strange thing is that I haven't installed OLAP option. I installed enterprise edition + partioning.
Any help is much appreciated. Is my installation ok?
Thanks in advance,
Tarek

Hi guido,
i have the same problem with OLAP, when i start an instance i have got error messages in alert_log, and a lot of objekts a invalid, i can not recompile the objekt, oracle will it automatic, and ends with this errors:
Line # = 0 Column # = 0 Error Text = ORA-12663: Services required by client not available on the server
Line # = 0 Column # = 0 Error Text = ORA-36961: Oracle OLAP is not available.
Line # = 0 Column # = 0 Error Text = ORA-06512: at line 4
Line # = 0 Column # = 0 Error Text = ORA-06512: at "SYS.OLAPIMPL_T", line 17
Line # = 0 Column # = 0 Error Text = ORA-06512: at "SYS.OLAPIMPL_T", line 23
I have oracle installed on debian 3.1
Have you any suggestions to solve this problem?
Thanks
ANDREAS
-GERMANY-

Cannot start second instance of collector

Hi everyone
I've got a strange one here. A workstation I noticed that wasn't scanned since 6 months (WinXP SP3, ZCM 10.3.1).
When I check the ZAA windows, it says Last Scanned i.e. today, Last Upload June 2.
I've found several errors 'Cannot start second instance of collector' in the local colw32.log.
However, the workstation gets rebooted daily and I can't find another instance of colw32.exe running in TaskManager.
How can I resolve this? I can't tell how many clients are affected. However, I've got almost 300 clients (15%) that haven't been scanned in the last 180 days...
Thanks
Roland

Originally Posted by rpfenninger
Hi everyone
I've got a strange one here. A workstation I noticed that wasn't scanned since 6 months (WinXP SP3, ZCM 10.3.1).
When I check the ZAA windows, it says Last Scanned i.e. today, Last Upload June 2.
I've found several errors 'Cannot start second instance of collector' in the local colw32.log.
However, the workstation gets rebooted daily and I can't find another instance of colw32.exe running in TaskManager.
How can I resolve this? I can't tell how many clients are affected. However, I've got almost 300 clients (15%) that haven't been scanned in the last 180 days...
Thanks
Roland
We had similar issue, inventory was never uploaded to server. To solve it we had to manually do a "Scan Now" from Zenworks agent -> Show properties -> Inventory -> Scan Now, after we did that once on the workstation then scheduled scans started to upload again.
I guess it would probably also work if you do a Inventory scan from quick tasks in ZCC but I never tried it so I'm not sure.
Thomas

Dbca fails cuz ASM instance startup fails. Unable to start both instances.

Following Jeffrey Hunter guide. Installing 2 node RAC on Oracle EL5 w/ 11g
All cluvfy operations successful up to this point of running dbca from node1 (lin1).
Errorwhen starting ASM instance on node lin2: PRKS-1009: Failed to start ASM instance "+ASM2 on node "lin2"...[CRS-0233: Resource or relatives are currently involved with another operation.]
[root@lin1 bin]# ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE lin1
ora....N1.lsnr application ONLINE ONLINE lin1
ora.lin1.gsd application ONLINE ONLINE lin1
ora.lin1.ons application ONLINE ONLINE lin1
ora.lin1.vip application ONLINE ONLINE lin1
ora....SM2.asm application ONLINE OFFLINE
ora....N2.lsnr application ONLINE ONLINE lin2
ora.lin2.gsd application ONLINE ONLINE lin2
ora.lin2.ons application ONLINE ONLINE lin2
ora.lin2.vip application ONLINE ONLINE lin2
[root@lin1 bin]# ./crs_start ora.lin2.ASM2.asm
Attempting to start `ora.lin2.ASM2.asm` on member `lin2`
[root@lin1 bin]# pwd
/u01/app/crs/bin
[root@lin1 bin]# ./crs_start ora.lin2.ASM2.asm
Attempting to start `ora.lin2.ASM2.asm` on member `lin2`
Start of `ora.lin2.ASM2.asm` on member `lin2` failed.
lin1 : CRS-1019: Resource ora.lin2.ASM2.asm (application) cannot run on lin1
CRS-0215: Could not start resource 'ora.lin2.ASM2.asm'.
[root@lin1 bin]# ./crs_stop ora.lin1.ASM1.asm
Attempting to stop `ora.lin1.ASM1.asm` on member `lin1`
Stop of `ora.lin1.ASM1.asm` on member `lin1` succeeded.
[root@lin1 bin]# ./crs_start ora.lin2.ASM2.asm
Attempting to start `ora.lin2.ASM2.asm` on member `lin2`
Start of `ora.lin2.ASM2.asm` on member `lin2` succeeded.
[root@lin1 bin]# ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application OFFLINE OFFLINE
ora....N1.lsnr application ONLINE ONLINE lin1
ora.lin1.gsd application ONLINE ONLINE lin1
ora.lin1.ons application ONLINE ONLINE lin1
ora.lin1.vip application ONLINE ONLINE lin1
ora....SM2.asm application ONLINE ONLINE lin2
ora....N2.lsnr application ONLINE ONLINE lin2
ora.lin2.gsd application ONLINE ONLINE lin2
ora.lin2.ons application ONLINE ONLINE lin2
ora.lin2.vip application ONLINE ONLINE lin2
...and so forth. I can't get both ASM instances to run concurrently. The dbca complains about whichever one is OFFLINE. When I try to start the OFFLINE instance I get something like:
[root@lin1 bin]# ./crs_start ora.lin2.ASM2.asm
Attempting to start `ora.lin2.ASM2.asm` on member `lin2`
Start of `ora.lin2.ASM2.asm` on member `lin2` failed.
lin1 : CRS-1019: Resource ora.lin2.ASM2.asm (application) cannot run on lin1
CRS-0215: Could not start resource 'ora.lin2.ASM2.asm'.
Any assistance very much appreciated. - thx, yomick

thanks for the response...vip seems to be fine...
[oracle@lin1 bin]$ more /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.1.50 shiva
# Public Network - (eth0)
192.168.1.100 lin1
192.168.1.101 lin2
# Private Interconnect - (eth1)
192.168.2.100 lin1-priv
192.168.2.101 lin2-priv
# Public Virtual IP (VIP) - (eth0)
192.168.1.200 lin1-vip
192.168.1.201 lin2-vip
# Private Storage Network for Openfiler - (eth1)
192.168.1.195 openfiler
192.168.2.195 openfiler-priv
[2]+ Exit 255 dbca
[oracle@lin1 bin]$ ping 192.168.1.200
PING 192.168.1.200 (192.168.1.200) 56(84) bytes of data.
64 bytes from 192.168.1.200: icmp_seq=1 ttl=64 time=0.100 ms
64 bytes from 192.168.1.200: icmp_seq=2 ttl=64 time=0.092 ms
--- 192.168.1.200 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.092/0.096/0.100/0.004 ms
[oracle@lin1 bin]$ ping 192.168.1.201
PING 192.168.1.201 (192.168.1.201) 56(84) bytes of data.
64 bytes from 192.168.1.201: icmp_seq=1 ttl=64 time=3.30 ms
64 bytes from 192.168.1.201: icmp_seq=2 ttl=64 time=0.236 ms
64 bytes from 192.168.1.201: icmp_seq=3 ttl=64 time=0.297 ms
--- 192.168.1.201 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 0.236/1.279/3.306/1.433 ms
[oracle@lin1 bin]$ crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE lin1
ora....N1.lsnr application ONLINE ONLINE lin1
ora.lin1.gsd application ONLINE ONLINE lin1
ora.lin1.ons application ONLINE ONLINE lin1
ora.lin1.vip application ONLINE ONLINE lin1
ora....SM2.asm application ONLINE OFFLINE
ora....N2.lsnr application ONLINE ONLINE lin2
ora.lin2.gsd application ONLINE ONLINE lin2
ora.lin2.ons application ONLINE ONLINE lin2
ora.lin2.vip application ONLINE ONLINE lin2
[oracle@lin1 bin]$

CC Updater - U44M1I11 Another Instance is Running

Seems like just last month I was struggling with this problem with CS6. Oh wait, I was:
http://forums.adobe.com/message/5753380#5753380
So now I'm back with CC. Installed all the programs today. Hit Update and of course Photoshop, Premiere, and Audition failed their Updates. Error this time was:
There was an error installing this update. Please try again or contact customer support. (U44M1|11)
I see that root spawns the Adobe Application Manager (Updater) process when I hit the Update button. Then the update fails.
Here's the end of the log file from /Library / / Adobe Setup Error.log
11/08/13 13:52:02:164 | [INFO] | | OOBE | DE | | | | 11968 |
11/08/13 13:52:02:164 | [INFO] | | OOBE | DE | | | | 11968 | Exit Code: 11 - Another instance running, Only a single instance can be run at a time.
11/08/13 13:52:02:165 | [INFO] | | OOBE | DE | | | | 11968 | Please see specific errors for troubleshooting. For example, ERROR: DW037 ...
What's the fix, Adobe? Don't send me to:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
I've already done that stuff. I'm so aggravated with this auto updater, it just doesn't work out of the box. This is a brand new 10.9 system, nothing else on it, except for CC, and it won't run it's updates after it's been installed.

Should have waited a few more minutes before posting the above issue. I fixed it, but the workaround is pretty poor. Adobe, you have problems with the root user spawning the updater's processes. Simple as that.
Here's my fix:
Enable the root user and give it a password in the Directory Utility (Users Groups/Login Options/Network Account Server/Open Directory Utility)
Curse Adobe for forcing you to enable the root user and thus provide another attack vector on your machine
Open Terminal
su to become the root user
Navigate to /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS
Run Photoshop as root by using ./Adobe Photoshop CC
Photoshop yelled at me for a password to run something when it started up, I ignored it
Use the Update... option in the Help menu.
Note in Activity Manager that this has been spawned by Root
Check off the boxes of programs you want to update, let the updater run. You will have to close out of Photoshop and then quit it by hitting Control C in your Terminal window
You may also have to go into Activity Manager and Force Quit the logtranspot2 process.
Wait for the update to complete
Quit Terminal
Quit and re-open the Creative Cloud app and verify all the programs show as "Up to Date"
Disable the root user
Curse Adobe for forcing you to do this every time you want to update your Creative Cloud programs. It's not very convienent.
So anyway, there's your fix. Hope it saves someone else a few hours of aggravation.

Starting multiple instances of Matlab in Mac OS X Tiger

I am trying to start multiple instances of Matlab in Mac OS X 10.4, that is, there are several users in this machine, and they all need to use Matlab. Right now, only one user is able to do so, when a second user logs into his/her account and they start Matlab, it does not start. Actually, if one user has X11 open (not even Matlab) and another user tries to start Matlab it won't start. I'm not sure if this is a license problem, an X11 problem, or a Matlab problem. To start matlab, I am using the StartMATLAB.app located in the Applications folder. Following are the details for the hardware:
Model Name: Mac Pro
Model Identifier:
MacPro2,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 8 MB
Memory: 8 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP21.007F.B06
SMC Version: 1.15f3
Serial Number: 157***UPZ
Some information about Mac OS:
System Version: Mac OS X 10.4.11 (8S2167)
Kernel Version: Darwin 8.11.1
The version of X11 is:
X11 1.1.3 - XFree86 4.4.0
I appreciate your help.
<Edited by Moderator>

See this article: An easy way to run multiple instances of any program.
I believe another alternative is to provide a separate copy of the application in the users own Home folder by placing it in the /Home/Applications/ folder. This may not work for all applications as some simply will not run multiple instances of itself.
Licensing is of course a separate issue as each unique user may require a license, although many licenses only restrict use to one CPU at a time rather than multiple users on a one CPU.

Another instance j2ee??

Hi ,
when I am giving the command : "j2ee -verbose" in the %j2ee_home%\bin directory, it is giving the following exceptin:
C:\j2sdkee1.2.1\bin>j2ee -verbose
J2EE server Listen Port: = 1049
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause could be ano
ther instance of the server already running.
at com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming(POAProtocolMgr.java:11
8)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:244)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:866)
java.lang.RuntimeException: Could not initialize j2ee server. Possible cause could be ano
ther instance of the server already running.
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:348)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:866)
J2EE server reported the following error: Could not initialize j2ee server. Possible caus
e could be another instance of the server already running.
Error executing J2EE server ...
several times I have shut down my system, uninstalled and reinstalled the server.... but steel while
running the server the same exception is coming.
Can any body give some idea how to solve the problem??
thanks in advance.

Greetings,
J2EE server Listen Port: = 1049So far so good... the server does not report module/port functioning until after they've been successfully started. IOW: the server listener is now - er, "listening" ':) - nothing on your system is conflicting with port 1049..
java.lang.RuntimeException: Could not initialize j2ee
server. Possible cause could be another instance of the
server already running.at
com.sun.enterprise.iiop.POAProtocolMgr.initializeNaming
POAProtocolMgr.java:118)You've encountered a not-so-uncommon problem... 'POA' is an acronym for 'Portable Object Adapter' and is a part of CORBA. More specifically, POA is used to provide a namespace to objects managed by an ORB which, as it turns out ;), is the next thing the RI tries to initialize: COS (Common Object Service) Naming Service (also called a 'CMA'; CORBA Management Agent). By default, the COS (CMA) runs on port 1050. In any case, it would seem your system already has an ORB running (e.g. VisiBroker) - or, perhaps, RMI-IIOP has been installed separately and this is conflicting with the instance included in the J2EE SDK...
several times I have shut down my system, uninstalled
and reinstalled the server.... but steel whileSo much unnecessary work and frustration... ':)
running the server the same exception is coming.
Can any body give some idea how to solve the
problem??"Why, 'sortanly!" The quickest way to solve the problem is to change the port number the RI's ORB is running on: cd to %J2EE_HOME%\config and edit the file orb.properties. Change the port number ("port=1050") to something non-conflicting - '1052' is usually a good try. Remember the final port number; Your client apps (including those in distinct Servlet containers), will now have to access your beans using this port.
thanks in advance.Regards,
Tony "Vee Schade" Cook

Launchd starting multiple instances of named (BIND)

Hi,
I'm trying to get named (BIND) to launch on startup, so I put the following plist in /Library/LaunchDaemons :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>org.isc.named</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
                <string>/usr/sbin/named</string>
                <string>-c</string>
                            <string>/etc/named.conf</string>
        </array>
        <key>ServiceIPC</key>
        <false/>
</dict>
</plist>
And, it launches on startup, except that it keeps launching more instances. I only need one. What am I doing wrong?
Thanks,
    -Jon

I figured it out. I need to run named in the foreground. Not exactly sure why, but not running it in the foreground must make launchd think that it's not running, so it starts another copy...
The -f option is needed to do this, so the plist should look like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>org.isc.named</string>
        <key>OnDemand</key>
        <false/>
        <key>ProgramArguments</key>
        <array>
                <string>/usr/sbin/named</string>
                <string>-f</string>
                <string>-c</string>
                <string>/etc/named.conf</string>
        </array>
        <key>ServiceIPC</key>
        <false/>
</dict>
</plist>

Start another instance

Similar Messages

Maybe you are looking for