Start BPM process from ABAP report. Need some investigations.
Hi there!
I have to start a BPM process from ABAP report. I found an article http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d75b45-7fef-2b10-bc8e-c6012e0a9457?QuickLink=index&overridelayout=true and have done everything it describes but the process doesn't start.
What I've done:
1) Created a service proxy in SE80.
2) Created a logical port in SOAMANAGER.
3) Write a code to start a WebService in ABAP Report.
But when I start a program nothing happens, no errors.
What analysis I did:
1) See logs and traces in SOAMANAGER - there is nothing appears after I start the report.
2) Tried to test connection to my WebService in SM59 - the connection works, but it use a POST method instead of GET:
Error: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
But I think it is OK and from the report it use a right method.
3) Tried to delete a logical port - the error of communication problem appears. So it means that all settings are right.
4) No logs in NWA logs
My thoughts - if there is not any errors and no result, it can be because the user authorization. E.g. it tried to start a process by a user who doesn't have SAP_BPM_SuperAdmin role. But I can't find a way how to check what really happens. So I want to ask for a help, colleagues:).
Dear Kirill Zhuklinets,
Can you share your solution as i am facing the same error while trying to consume BPM webservice from SRM ECC
Error Message from SRM ECC :
Exception occurred in communication framework:Error in HTTP Framework:405Method Not Allowed
Log from BPM Web service
Error: process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
Please share your solution..
Regards,
Yasin
Similar Messages
-
Start BPM Process from ABAP with another User as GUEST
Hi all,
i would like to start the BPM Process by a webservice. It works if the user GUEST has the role BPM_SuperAdmin.
My question is: How can i chance this user, who call the webservice starting the process. The user, who starts the process by calling the webservice should be my own user instead of GUEST.
Thanks in advance.
Regards,
Christophthe last reply is regarding the configuration at consumer side.
of course you have to configure at the service provider side to enable the logon ticket as acceptable authentication method.
I checked at my side, i found the the service for triggering bpm is already configured to use id/pwd and logon ticket as authentication method.
you can check in this way,
CE nwa-> SOA Management->Application and Scenario Communication-->Single Service Administration
find your service, if you haven't assign any profile to your service, there will be only one configuration generate by system
you can edit this configuration.
go to configuration tab, select the endpoint, select security tab in the bottom tab list.
change the setting there.
Edited by: John Wu on Sep 10, 2010 7:29 PM -
How to start BPM process WSDL from WDA
Hello,
I need to start BPM Process from SRM ECC with WDA; i have been through this link ;
http://forums.sdn.sap.com/thread.jspa?threadID=1643425
also followed the pdf named 'Triggering NetWeaver BPM Process from ABAP' provided from SAP but still stuck on some issues;
- I have a WSDL in order to start BPM process and works fine as i successfully call it from EP Java AS with WDJ..
- What i need to do is to trigg it from SRM Screens so i need to call this WSD from ECC, so;
When i try to create a consumer proxy using external wsdl option, after putting in WSDL Url it throws an error;
Exception occurred in communication framework:Error in HTTP Framework:405 Method Not Allowed http://xxx.local:50000/bpm/de
mosapcom/dccategoryappbpm/StartCatAppSI
Exception of class CX_SLIB_HTTP_FAIL
And this is error from BPM Logs for the same action;
process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
at com.sap.engine.services.webservices.espbase.server.additions.SOAPHTTPTransportBinding.getAction(SOAPHTTPTransportBinding.java:581)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.overwriteConfiguration(RuntimeProcessingEnvironment.java:894)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:469)
Also i found this link : http://wiki.sdn.sap.com/wiki/display/TechTSG/(WSR)Problems-P06/
But no help so far,
So, is there anyone faced similar or the same issue? Any suggestion will be appreciated.
Regards,
YasinHi soujanya,
BPM server is not open to the internet but only intranet, so i will copy the WSDL code for you,
will be glad if you can help;
- <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.koczer.com/StartCatAppSI/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="StartCatAppSI" targetNamespace="http://www.koczer.com/StartCatAppSI/">
- <wsdl:types>
- <xsd:schema targetNamespace="http://www.koczer.com/StartCatAppSI/">
- <xsd:complexType name="DetailsType">
- <xsd:sequence>
<xsd:element name="Category_ID" type="xsd:int" />
<xsd:element name="Category_Text" type="xsd:string" />
<xsd:element name="User" type="xsd:string" />
<xsd:element name="Manager" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
- <xsd:element name="NewOperation">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="Details" type="tns:DetailsType" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="NewOperationRequest">
<wsdl:part element="tns:NewOperation" name="parameters" />
</wsdl:message>
- <wsdl:portType name="StartCatAppSI">
- <wsdl:operation name="NewOperation">
<wsdl:input message="tns:NewOperationRequest" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="StartCatAppSISOAP" type="tns:StartCatAppSI">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="NewOperation">
<soap:operation soapAction="http://www.koczer.com/StartCatAppSI/NewOperation" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="StartCatAppSI">
- <wsdl:port binding="tns:StartCatAppSISOAP" name="StartCatAppSISOAP">
<soap:address location="http://zerbpmts.koczer.local:50000/bpm/demosapcom/dccategoryappbpm/StartCatAppSI" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions> -
How to start BPM Process in Netweaver CE 7.1 from backend
Hi,
since 2 Month i am trying to use SAP Netweaver CE 7.1 EHP1. I found a lot about modelling of business process with process composer.
In my company we are often using SAP Standard Programs/transaktions, thats why I want to start a SAP Netweaver BPM Process from SAP Backend. I think there are more than one way. May be someone can tel me one easy way.
The following systems are available in my Landascape:
- PI 7.1
- ERP 2005
- CE 7.1 EHP1 with ESR
Does someone have an idea how to start the BPM Process or how to trigger start event from Backend?
Greetings,
ManuelHi,
Netweaver BPM process can be started in two ways:
1. Using NWA by instantiating a process
2. Using a Web service which trigers the Start event of the Business Process. You may find this useful:
/people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
Hope this helps!!
Regards,
Arafat -
Unable to Trigger BPM Process from ECC --- Need Help
Hi All,
I have created a BPM and exposed the Process as a web service. Now when ECC team is trying to trigger the BPM through the provided Web Service, they are getting the below error.
Issue is that the messages fails in ECC with the Status u201CSystem Erroru201D and this is due to reason below :
"The RM Source endpoint requests this acknowledgement by including an
<AckRequested> header block in the message. An RM Destination that
receives a message that contains an <AckRequested> header block MUST
respond with a message containing a <SequenceAcknowledgement> header
block" (Web Services Reliable Messaging Protocol 1.0).
Below is the structure of WSDL I gave to the ECC team.
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.example.org/NewWSDLFile/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" name="NewWSDLFile" targetNamespace="http://www.example.org/NewWSDLFile/">
<wsdl:types>
<xsd:schema targetNamespace="http://www.example.org/NewWSDLFile/">
<xsd:element name="NewOperation">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="NewValue" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="NewOperationRequest">
<wsdl:part element="tns:NewOperation" name="parameters"/>
</wsdl:message>
<wsdl:portType name="NewWSDLFile">
<wsdl:operation name="NewOperation">
<wsdl:input message="tns:NewOperationRequest"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="NewWSDLFileSOAP" type="tns:NewWSDLFile">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="NewOperation">
<soap:operation soapAction="http://www.example.org/NewWSDLFile/NewOperation"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="NewWSDLFile">
<wsdl:port binding="tns:NewWSDLFileSOAP" name="NewWSDLFileSOAP">
<soap:address location="http://www.example.org/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Please help.This below thread solved my problem.
Start BPM Process Trigger - Read timed out
SrinivaS -
How to trigger BPM Process from SRM Portal
Hello Experts,
I'am new to BPM and NWDS 7.3 but experienced with Abap and NWDS 7.0 Development...
Before posting, i have been through the forum and couldn't find exact answer to my case..
Basicly what i need to do is to trigger BPM Processes on the BPM Server from SRM Portal Server, I'm aware that i can communicate between these servers with WSDL basicly but how am i going to call the BPM Process' Web Service from Standart SRM Processes?
These processes will be standart ones mostly and also i am new to SRM.
Kindest Regards,SAP SRM 7.0 user interface is developed in WebDynpro and runs on NetWeaver Portal (Portal was optional component in earlier versions of SRM but it is mandatory component now). So in order to call BPM Webservice (i.e., to trigger a BPM Process) from NetWeaver Portal / SRM 7.0 you can do the following
- Develop a custom application (using EJBs,etc) to call the BPM web service by creating a web service proxy client using NWDS and then deploying it on Portal Server.
- Directly create a model in WebDynpro project by using the WSDL of BPM trigger webservice (using NWDS). You can then call the model in WD User Interface, which in turn will invoke the BPM web service and start the process.
Hope this helps. -
Calling a proxy from ABAP Report
Hi All,
Can any one gimme some idea about calling a XI proxy from ABAP Report.
I need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
Thanks in advance.
Tnx,
Joe.Hi Meetjoe,
We have to design the required interface in PI ,that is used to hold the report data when tigerred a proxy and generate the proxy based on the interface if the Proxy is based on the Outbound side its called client proxy or if the proxy is genereated on Inbound interface we call it server proxy.
need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
In your case its gonna be the client proxy refer the follwing links for your better understanding
For concepts on Proxies:
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
To enable Proxy connections:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a
Smaple scenarios on Proxy:
Proxysettings /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxy /people/siva.maranani/blog/2005/04/03/abap-server-proxies
ABAP Client Proxy /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Thanks,
Ram. -
How to trigger the BPM process from WD Application
Hello All,
I have a simple business process with two ui activities. I am able to start the process from NWA -> Process Repository.
But, I need to start the process from the application. Here is the requirement:
User opens the application. ON completion, the BPM process for approval needs to be triggered. How do i access/obtain process?
If I need to call a particular task in process, How do i do that?
Kindly assist.
Thank you.
Regards,
Sharathif you want to know the whole story, please refer to the doc
http://help.sap.com/saphelp_nwce72/helpdata/en/44/4d2bb1c6b00597e10000000a155369/frameset.htm
the profile, provider system,endpoint。。。。。
search this doc in sdn, it is a good example regarding the configuration.
How to Use SOA Configuration to Call RFCs and Web Services from within SAP NetWeaver BPM
hope those may help. -
Calling custom Infotype method from ABAP report
Hi Experts,
I am working on an application where i need to call a method of a custom defined infotype.
I have done this -->
1. Create a custom infotype 9111
2. SAP creates a class of that infotype ZCL_HRPA_INFOTYPE_9111
3. Inside this method there are few inherited method which provide me functionality of insert , update , delete
i want to call methods IF_HRPA_INFTY_BL~MODIFY,
IF_HRPA_INFTY_BL~INSERT
However when i call these method from abap report this method does not work.
where as when i try to insert an entry using PA30 transaction it works.
Does anyone know why does this happen and what is the solution?
Regards,
Ashish ShahHi,
This is the code we are using. Just calling the read and modify methods of the check class. Very simple actually .. we just want once update/insert to work but it does not.
<CODE>
REPORT ZTESTRAD_WD.
FIELD-SYMBOLS <p9106> TYPE p9106.
DATA : infty_container_tab TYPE hrpad_infty_container_tab ,
message_list TYPE REF TO cl_hrpa_message_list,
w_ok type boole_d ,
ref_class TYPE REF TO ZCL_HRPA_INFOTYPE_9106,
container TYPE REF TO if_hrpa_infty_container,
it9106_container TYPE REF TO cl_hrpa_infotype_container,
p9106_ref TYPE REF TO data,
busilog type ref to if_hrpa_masterdata_bl.
CREATE OBJECT message_list.
TRY.
CREATE OBJECT ref_class
EXPORTING
tclas = 'A'
infty = '9106'.
CATCH cx_hrpa_violated_assertion .
write :/ 'Error during initialization'.
ENDTRY.
call method cl_hrpa_masterdata_bl=>get_instance
importing
masterdata_bl = busilog.
TRY.
CALL METHOD ref_class->IF_HRPA_INFTY_BL~read
EXPORTING
tclas = 'A'
pernr = 'XXXXXXXX'
infty = '9106'
begda = sy-datum
endda = sy-datum
no_auth_check = abap_true
message_handler = message_list
IMPORTING
container_tab = infty_container_tab
is_ok = w_ok.
CATCH cx_hrpa_violated_assertion .
WRITE :/ 'Infotype could not be read'.
ENDTRY.
*" Fill the local structure with container data:
loop at infty_container_tab into container.
it9106_container ?= container.
TRY.
CALL METHOD it9106_container->primary_record_ref
IMPORTING
pnnnn_ref = p9106_ref.
CATCH cx_hrpa_violated_assertion .
ENDTRY.
ASSIGN p9106_ref->* to <p9106>.
write :/ <p9106> .
endloop.
*" Just change some field values of the record
<p9106>-C1name2 = 'Test name'.
<p9106>-C2name2 = 'Test name 2 3 4'.
data : return TYPE BAPIRETURN1,
return1 TYPE BAPIRETURN1.
*CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
number = <p9106>-pernr
IMPORTING
RETURN = return1
*PERFORM do_nothing(sapfp50p).
The container itself is modified
container ?= it9106_container->modify_primary_record( <p9106> ).
CREATE OBJECT message_list.
the invocation - errors are always fatal !!!
DATA : lx_exception TYPE REF TO cx_root,
update_mode type HRPAD_UPDATE_MODE,
massn type massn,
massg type massg.
TRY.
CALL METHOD ref_class->IF_HRPA_INFTY_BL~MODIFY(
EXPORTING
old_container = it9106_container
massn = massn
massg = massg
update_mode = update_mode
no_auth_check = 'X'
message_handler = message_list
IMPORTING
is_ok = w_ok
CHANGING
container = container
CATCH cx_hrpa_violated_assertion INTO lx_exception.
RAISE EXCEPTION TYPE cx_wd_no_handler
EXPORTING previous = lx_exception.
ENDTRY.
</CODE>
I have also tried by instantiating the cl_hrpa_masterdata_bl and then calling the methods on that object...... makes no difference.
I used this link to proceed with the modifications:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/21d2254bba2bebe10000000a1553f7/frameset.htm
The funny thing is that the WHOLE logic executes without any error messages or dumps or anything. I have now debugged almost every line of code that these methods call. PA30 works just fine. HR_INFOTYPE_OPERATION does not .. that's a whole differnt story. -
Call WD Interactive Form with Values from ABAP Report
Hallo together,
i have a simple ABAP report with some values.
How to call a webdynpro passing these values and using them in Select-Statements to prefill the called Interactive Form
Thanks
PhilipHi Runal,
i tried this and i get the parameters in the defaulthandler event.
but now i need these values in the supply function of my node to get the values which should be display.
How to access from supply function to the defaulthandler event? I read some threads but none answered my question i think.
METHOD handledefault .
DATA: it_parameter TYPE tihttpnvp,
wa_parameter LIKE LINE OF it_parameter.
wdevent->get_data(
EXPORTING
name = if_wd_application=>all_url_parameters
IMPORTING
value = it_parameter ).
ENDMETHOD.
Thanks
Philip -
How to start BPM Process in Netweaver CE 7.1
Hi,
since 2 Month i am trying to use SAP Netweaver CE 7.1 EHP1. I found a lot about modelling of business process with process composer.
In my company we are often using SAP Standard Programs/transaktions, thats why I want to start a SAP Netweaver BPM Process from SAP Backend. I think there are more than one way. May be someone can tel me one easy way.
The following systems are available in my Landascape:
- PI 7.1
- ERP 2005
- CE 7.1 EHP1 with ESR
Does someone have an idea how to start the BPM Process or how to trigger start event from Backend?
Greetings,
ManuelHi,
Netweaver BPM process can be started in two ways:
1. Using NWA by instantiating a process
2. Using a Web service which trigers the Start event of the Business Process. You may find this useful:
/people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
Hope this helps!!
Regards,
Arafat -
I want to execute a BSP from ABAP report. The BSP is the standar CRM CASE MANAGEMENT BSP.
I have a CRM CASE list in ABAP report and when I make double-click on one case i want to call BSP to show this case. I don't want to execute the GUI transaction CRMD_CASE. I need to execute the BSP.Hello Ivan,
To call the BSP from the ABAP report following thread will be helpful for you.
Call BSP from SE38 Program ?
Regards
Aashish Garg
Message was edited by:
aashish garg -
Calling and manipulating data on an Interactive Adobe form from ABAP report
Dear All,
Can you please tell me how to call an interactive adobe from from a custom adobe form?
If so how can we pass and receive data between the interactive adobe form and the abap report program?
Thank you.
Regards,
Prosenjit.Hi,
It is possible to call an Interactive Adobe form from ABAP report and pass data into the form. If you search the forum, you will get many threads explaining the process. Let me know if you have any specific questions on this.
Regards,
Sanoosh -
How to create .csv file from ABAP report
Hi
We have a requirement to generate .csv file from abap report.
Currently user saves data from abap report to spreadsheet(.xls format) in desktop. Then opens excel file and save as .csv format. Need option to save directly in .csv format instead of .xls format.
Please let me know, if there is any standard function module available to create .csv file.
Regards
UmaI tried with your code it's going to dump
REPORT ZTEMP101 message-id 00.
tables: lfa1.
types: begin of t_lfa1,
lifnr like lfa1-lifnr,
name1 like lfa1-name1,
end of t_lfa1.
data: i_lfa1 type standard table of t_lfa1,
wa_lfa1 type t_lfa1.
types truxs_t_text_data(4096) type c occurs 0.
data: csv_converted_table type table of TRUXS_T_TEXT_DATA.
select-options: s_lifnr for lfa1-lifnr.
select lifnr name1 from lfa1 into table i_lfa1
where lifnr in s_lifnr.
CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
EXPORTING
I_FIELD_SEPERATOR = ';'
I_LINE_HEADER =
I_FILENAME =
I_APPL_KEEP = ' '
TABLES
I_TAB_SAP_DATA = I_LFA1
CHANGING
I_TAB_CONVERTED_DATA = csv_converted_table
EXCEPTIONS
CONVERSION_FAILED = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME =
'C:\Documents and Settings\ps12\Desktop\Test folder\exl.cvs'
FILETYPE = 'DAT'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = csv_converted_table
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
my version is 4.6c -
How can I print PDF attachments from ABAP report in transaction ME23N?
Hi,
Users attach PDF files using "services for objects" in transaction ME23N.
How can I print the PDF attachments from ABAP report ?
Thanks in advance,,Hi,
check this link,this might help you to solve your problem
/people/thomas.jung3/blog/2005/04/28/setting-up-an-adobe-writer-for-abap-output
Regards
Kiran Sure
Maybe you are looking for
-
IOS pdf viewer cannot display text that was entered in acrobat forms???
hi. i have a blank PDF form. i enter text into this form on my mac, i use the latest adobe acrobat or adobe reader to do this. i email this filled out form to a person. the person uses an iphone or ipad to view his mail. he is a novice user, no extra
-
I have what I consider to be a huge problem. I set my phone down on its screen (So I don't end up damaging the camera) on a clean, flat table. I set one side on the table, and dropped it the rest of the way to the table, and heard a pretty loud "POP
-
Problem with accessing controls via getNetuiTagName
Hi, I am migrating my project from weblogic 8.1 to 10.3. I am facing issues in calls like : document.forms[getNetuiTagName('tagname', this)]. Is there any issue in using getNetuitagName? what is the work around in that case? Thanks.
-
How can I get Automator to run every hour
Hello, I want to run a Unix Shell executable every hour (measuring network bandwidth), but automator only seems to be able to go down to once a day. Is there anyway of getting automator to run the executable every hour?
-
My macbook pro can't read dvd just cd
Recdently my macbook pro can't read a dvd format. I hear it booting but after 20 sec the dvd comes out! CD's is no problem... Does anyone have a idea? Message was edited by: erikafromkonstanz