Start MS Explorer Urgent help

Hi there,
I've been searching for about two days now, trying to find a solution to our problem. We want to open MS Explorer from a link in Netscape. So basicaly force the link to open a new window in MS Explorer (this is for an internal jsp application).
I think that the answer that I found in some of these forums, is the solution. So I tried it. I used this code:
Runtime.getRuntime().exec("C:\\progra~1\\intern~1\\IEXPLORE.exe http://java.sun.com");
But I get the following error:
java.io.IOException: CreateProcess: C:\progra~1\intern~1\IEXPLORE.exe http://java.sun.com error=3
at java.lang.Win32Process.create(Native Method)
at java.lang.Win32Process.(Win32Process.java:66)
at java.lang.Runtime.execInternal(Native Method)
at java.lang.Runtime.exec(Runtime.java:551)
at java.lang.Runtime.exec(Runtime.java:418)
at java.lang.Runtime.exec(Runtime.java:361)
at java.lang.Runtime.exec(Runtime.java:325)
at _0002fprojectMenu_0002ejspprojectMenu_jsp_30._jspService(_0002fprojectMenu_0002ejspprojectMenu_jsp_30.java:2035)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.runtime.JspServlet$JspServletWrapper.service(JspServlet.java:174)
at org.apache.jasper.runtime.JspServlet.serviceJspFile(JspServlet.java:261)
at org.apache.jasper.runtime.JspServlet.service(JspServlet.java:369)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:503)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
at org.apache.tomcat.service.connector.Ajp12ConnectionHandler.processConnection(Ajp12ConnectionHandler.java:156)
at org.apache.tomcat.service.TcpConnectionThread.run(SimpleTcpEndpoint.java:338)
at java.lang.Thread.run(Thread.java:484)
Is there anything that I'm doing wrong? Maybe somebody out there can help me out with this one. Or maybe somebody has a better way of opening an MS Explorer window from a link.
Thanks and hope to hear from somebody sooooooon.

I will go one better. Generally speaking, Java will not let you do something like that because it's a security risk. For example, if all you had to do was click on a link to launch MS Explorer, then I could put up a web page that launches regedit on your computer whenever you clicked on a link.
I think you are much better off coding (or using) JFileDialog from within an applet for this specific purpose.

Similar Messages

  • File with ? Flashing on start up. Urgent help please.

    Good afternoon.
    I Hope you can help as I'm getting really stressed out, I have read a few threads and although I'm not completely blind when it comes to computers this is a little beyond me.
    on start up I have a file icon with a question mark in the centre flashing. I believe this is because a file can not be found or a hard drive error.
    my MacBook is 2011 and I'm running on Yosemite, any other information you need?
    i Have started up using command and R.
    LOgged in in to my wifi and gained access to the disk utility.
    on that I am faced in the left hand pane with an orange icon (Mac os x base system)
    I can verify the disk - this tells me "the volume mac os x base system appears to be ok"
    the "repair disk" tab is NOT highlighted.
    in a real simple guide can anyone help me as I really can not loose what I have on the laptop And need it up and running asap?
    thank you for your time

    You need to run the Repair Disk command on your regular drive and not the Mac OS X Base System entry. If your internal drive doesn't show up in the list, it's either dead or has become physically connected; recovering data from a failed drive can only be done by a professional service, and those can charge hundreds or thousands of dollars.
    (115886)

  • T60 Client security won't let Windows XP Start ! Need urgent help !

    Hello everyone, sorry for my English (I'm French).
    Since a few days, CSS @ ThinkPad startup was either long or frozen from times to times.
    Since this morning, every startups go to froze.
    I called Lenovo support and they advise me to Bios disable Security chipset, with no effect.
    They then advised me to restore my system !
    After playing with Bios option, trying to launch Windows in safe mode or debug mode, CSS (before the fingerprint question) runs for ever !
    Please help, !!!!

    Hello everyone, sorry for my English (I'm French).
    Since a few days, CSS @ ThinkPad startup was either long or frozen from times to times.
    Since this morning, every startups go to froze.
    I called Lenovo support and they advise me to Bios disable Security chipset, with no effect.
    They then advised me to restore my system !
    After playing with Bios option, trying to launch Windows in safe mode or debug mode, CSS (before the fingerprint question) runs for ever !
    Please help, !!!!

  • When I copy and paste from Word to my e-mail using Firefox it changes the font and spacing to single and 10pt. It just started doing this a month ago. It does not do it when I am on my laptop or using Explorer. Help, I hate explorer.

    When I copy and paste from Word to my e-mail using Firefox it changes the font and spacing to single space and 10pt.
    It just started doing this a month ago.
    It does not do it when I am on my laptop or using Explorer.
    Help, I hate explorer.

    If this were a project that I was involved in, I would recapture the media at the correct frame rate and rebuild the sequences correctly.
    Moving from production, to post production, to delivery is a series of steps, and the success of any particular step is based on having all the preceding steps done correctly.
    Shortcuts and workarounds tend to create awkward and difficult problems, that often only surface late in the process.
    MtD

  • Just bought Elements 13. Input serial number (starting 1057), which is not recognised and the installation stalls here. Urgent help please...

    Just bought Elements 13. Input serial number (starting 1057), which is not recognised and the installation stalls here. Urgent help please...

    Maryrhire910 I am sorry that you are facing difficulty downloading and installing Photoshop Elements 12.  Are you downloading the installation files from Download Photoshop Elements products | 13, 12, 11, 10?  If so what specific error are you receiving?

  • Urgent Help Macbook Won't Start Up

    Hey
    Im in need of some "urgent help", yesturday i was working on my GCSE coursework, i saved and then i turned my macbook off. Later that day i turned it back on to add some finishing touches, the macbook decided not to load the OS.
    It just goes to the apple logo and the circle thingy and just stays there.
    I rang up the helpline but they basically said that it dosen't matter that i can't get my coursework because i don't have the extended warranty. They advised me to come here because "we are bound to have hundreds of other cases the same to your's on there" that to me say's something.
    Although i will continue to use the mac if this has to go in for repair, the response is quite inconsiderate being honest. Im 15 and i can't afford the extra care.
    So im really reaching out for your help here folks, it's due in next week. I need to get the file off there desperately. I've done a hardware check and everything comes up fine.
    Please guys HELP!!!!!!!!!!!!
    Thanks

    Try running Disk Utility, and repair permissions and verify disk. If verify disk shows any problems, boot from your install disc and repair disk.
    If you can't repair the disk and get going again, you may be able to do an archive and install OS reinstallation, which will preserve your data. If that doesn't work for some reason, you may be able to do an erase and install, which will erase your data. Hopefully you have a backup.
    I assume phone support works the same way in the U.K. as in the U.S. You have a 1-year warranty. If you call after 90 days, they ask for a credit card in case the problem is not covered by warranty. If the problem is covered by warranty, you are not charged.
    If the problem is solved by any of the above troubleshooting steps, it is not a warranty issue. The Apple support person is probably just trying to save you from being charged for what is very possibly not a warranty-covered problem.

  • URGENT HELP NEEDED (Bios Settings Failed)

    Hey Guys,
    I am having problems with my MSI Board, and don't know what to do.  I am very much a noob to BIOS/and modding so I apologize in advance.  You guys helped me a few months ago getting everything up and running and all was great for months.  Then last night I walked away from my PC for a while and when i came back a starting screen was on saying my OC Settings Failed to load, i tried other versions I saved and they all failed as well.  I ended up loading failsafe options, and got the "double start" where the computer turns on, then instantly shuts off, then turns on again.  This allowed me to load windows 7, which then started to "install updates".   So i think while i was away Windows automatically updated and rebooted... but would that effect my BIOS settings?
    As I said, I had my system running perfect for months no errors or crashes at all based on the Bios setting you guys help me with in this thread:  https://forum-en.msi.com/index.php?topic=147854.0
    However, last week I removed the heat sink and installed this cooler:  http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010
    All I did was unhook everything from the MB, install the cooler, and then hook everything back up to the MB.  The only thing I may have done wrong is not connect the SATA devices (my HDs and ROMS) back in the spots they were in originally.  However after I installed the cooler, they system booted right up, and I haven’t had any problems with my system for the past two weeks.  I also should note I didnt make any BIOS changes either after I installed the cooler.  So I don’t know if I should have done something there.   Yet, like I said the system has been fine for the past two weeks, no crashes or errors... it wasn’t until last night after Windows auto updated that this has begun.
    The reason I need "URGENT HELP" is because of course I just a new job with deadlines due and so much video editing work I need to do.  I would be fine leaving it on failsafe settings, and forgetting the OC setting all together if I new that would make the system stable.  But considering its still doing the "double start" even in failsafe mode, im afraid if i start working my system will crash.
    So I am begging anybody for any advice or help they could provide.  I will provide my system info below.  If anybody can guide me as to what settings I should set in BIOS i would appreciate it.  Or perhaps there’s a BIOS update that I should use now that I have a cooler and not a heat sink?  If you need any more information from me, just ask.  I will be monitoring this thread all day, as I desperately need help.
    MY SYSTEM: 
    Intel 980X chip running Win 7 64bit (with MSI BigBang xPower MB installed in my old Dell XPS 730X)
    (1) SATA II WD 3gb Hard Drive @ 1.5TB
    (2) OCZ SATA II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
    (2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
    3 DVD/CD/BLUERAY DRIVES:
    1 SATA DVD DRIVE
    1 SATA BlueRay Drive
    1 SATA CD Drive
    (So 8 SATA Devices Total)
    24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
    1 NVida Geforce GTX 470
    1 Soundblaster X-Fi Titanum Card
    New Addition Water Cooler:  http://www.newegg.com/Product/Product.aspx?Item=N82E16835181010&nm_mc=OTC-Froogle&cm_mmc=OTC-Froogle-_-Water+Cooling-_-Corsair-_-35181010 

    PROBLEM:  My OC BIOS setting wont load.  Even on failsafe i get the "double start".  I want to get back to my OC (stable) settings.
    UPDATE:  Since I posted somebody messaged me mentioned I should have "reset the CMOS" after I installed the new cooler.  So I did that, and now they system starts fine without the "double start".  I am able to load one of my saved OC settings now as well (but any others causes a failure).
    NEW QUESTIONS: 
          1.  Since I reset the CMOS and now the system is starting fine on my last OC settings, is it safe to assume the sytem is stable for now? 
          2.  I never made any power changes or BIOS changes after I installed the new cooler.  Should I have?
          3.  After I reset the CMOS was I soupposed to reinstall the drivers from the MSI disk again?  I did not, and the system seems to be fine, but I thought I was soupposed to do that after a CMOS reset.
          4.  Is there a new BIOS version for my setup that may be better now?   Im currently on v1.5
    Here is a screenshot from CPUZ of the system information currently.  This is with it booting normally after my CMOS reboot.  I just figured id post it incase it helps with any of my questions.  Thanks so much for helping guys!

  • [URGENT HELP NEEDED] Premiere Pro CS6 failed rendering

    Hello!
    I`ll try to make this quick because I need help asap. I`ve been starting to make YouTube gaming videos 3 weeks ago and my channel is growing up pretty fast. I promised I would make a video everyday but it`s been a full week since I couldn`t upload because I was busy and when I tried to render it failed.
    Anyway here`s how it goes.I`ve recorded with fraps some gameplay footage with the resolution of 1360x706. One of my friends reccommanded me Adobe Premiere Pro for editing so I`m using the trial version of CS6. I create a new project and choose a format of 720 25 (cant really remember the exact name). I then import my recorded files and when I place them in the sequence it tells me the resolution is different and asks me if I want to change the sequence settings according to the files. Usually, I ignore it and when I export the Media I just tick the option: "Scale to Fill" and that usually works just fine, quality HD on YT...
    But this week it has driven me crazy, I really don`t want to explain how much stress and dissapointment this has caused to me because I think I`ll end up raging...I`ll just tell you I`ve been trying for a couple of days more than 7 time to render the project(each time it takes about an hour and a bit more, so let`s just call it 7 hours wasted). The problem actually is that when I check the output file after exporting the media, the file size is ONLY 24 bytes!!! Other times the file size gets to like half of the one that should be or less, but mainly the render even so takes up a normal length of time of processing but in the end the file is only 24 bytes..Thing is I don`t encounter any error whatsoever...
    I really need some urgent help!
    Thanks!

    1st, some FRAPS information
    These are for Premiere Elements, but may help with PPro
    Fraps & Elements http://forums.adobe.com/thread/871095
    -and more Elements http://forums.adobe.com/thread/943772
    -and yet more Elements http://forums.adobe.com/thread/967201
    2nd, it is REALLY better to have your project sequence match your video
    Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341

  • Urgent help needed!! Layout table and Draw layout cell dissapeared.

    I need some urgent help. I'm using CS3 but for a while my
    Layout Table and Draw Layout Cell icons appear greyed and can't use
    them at all. Is there any kind soul out there who knows how to fix
    this? I'm going nuts trying all the possible options but none seem
    to work.
    Help please!!!!!!

    > How would you about designing a page without using html?
    You don't. But I don't recall suggesting that you not use
    HTML. I just
    suggested that you use best-practice HTML, no? Or maybe you
    meant to ask
    how you would go about building your site without learning
    HTML? In that
    case, I think you are outta luck. Using DW without knowing
    HTML is a very
    punishing experience, I'm afraid.
    > PS: A virtual box of 12 bottles of Moet Chandon is
    already on your way!!
    I'd prefer Cristal, please.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Untersberg" <[email protected]> wrote in
    message
    news:g4tj9a$m5o$[email protected]..
    > Ahhhhhh!!!!! They came up!!!! They came up again!!
    > I was on standard mode. Now going back to your
    suggestion, which I really
    > appreciate. How would you about designing a page without
    using html? I'm
    > just
    > redesigning my website at the moment and need it to get
    going urgently,
    > hence
    > the reluctance to start learning HTML at the moment.
    I'll do after but I
    > need
    > to get this up and running fairly quickly.
    >
    > Cheers.
    >
    > PS: A virtual box of 12 bottles of Moet Chandon is
    already on your way!!
    >

  • Urgent help needed to get this home page up!

    Hi,
    I need urgent help with this and it is driving me crazy. For
    some reason my animation starts at its fastest and won't stop until
    you click the area then it works properly. I have no clue why it is
    doing this and only seems to do it on a PC browser not on a Mac.
    Can anyone help please!!!!!
    Link to sample:
    http://www.totalamber.com/test.html
    Link to fla:
    http://www.totalamber.com/flash/homepage.fla
    Thanks so much for anyone who can help or tries to help me.
    Neil
    Ps this is urgent and i can't find a solution by searching on
    here

    Thanks to anyone who has looked at this but i have found the
    answer.
    It is due to what many of the users on here will already know
    and can be explained in this link:
    http://blog.deconcept.com/swfobject/
    I had forgot about the legal patent going on with microsoft!
    Hope it helps anyone else as bad as i am.
    Neil

  • Urgent help needed! How do I use Time Machine to restore my System disc?

    I need urgent help. First I discovered that my Library folder was empty. When I tried to restore the library to an earlier version via Timemachine it would not let me because it said the system was in use. Trying to start-up from another system on another internal drive and using various disc repairs resulted in the whole volume to disappear.
    Question is how do I get the earlier system from my Timemachine backup drive? I have another Mac where I can attach the TIme machine HD to. Can I restore it from there and then copy the files over to my corrupted disc? All my programs are on there as well, which would take me days to re-install and then there are the other bits, emails, photos etc. Can anyone help?

    lightandmagic wrote:
    Thanks for your sympathy Pondini and the encouragement. You just reminded me that I will lose a whole working day restoring !!! Do you happen to know where the emails are kept on the system and the address book? I better nick those as well as my other life sustaining bits before its too late. I don't trust anything any more.
    I don't know what you mean by "nick those." Time Machine will put everything back the way it was at the time of the backup (unless you'd excluded things).
    Do you mean you want to restore things from the period after the backup you selected?
    For Address Book or Apple Mail, start the application, then +Enter Time Machine,+ navigate to your latest backup, and you'll have a prompt to restore. For Mail, you can restore an entire mailbox. When you exit from TM, you'll see a new folder in your Mail sidebar with the restored items, so you can sift through them and move, delete, or leave them as you wish.
    Other items, you'll have to locate and restore via the Finder > Time Machine.

  • Urgent help needed: registry.dat is missing when i run my form in web base

    Hi gurus,
    i configured my forms and report server in windows 2003 and i received the following error msg when tryin to access my web base forms 6I.
    FRM-92129: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
    Details...
    Java Exception:
    oracle.forms.engine.RunformException: FRM-92120: Registry file http://domain.com/form60java/oracle/forms/registry/Registry.dat is missing.
    at oracle.forms.engine.Runform.initRegistry(Unknow Source)
    at oracle.forms.engine.Runform.startRegistry(Unknow Source)
    at oracle.forms.engine.Main.createRunform(Unknow Source)
    at oracle.forms.engine.Main.start(Unknow Source)
    at sun.applet.JinitAppletPanel.run(Compiled code)
    at java.lang.Tread.run(Thread.java:466)
    what can be goes wrong with my steps to receive the above error?? i tried in windows XP and Vista, and i getting the same error message as above.
    Your urgent help and advise is needed plssssssss.......
    Many thanks in advance.

    The URL doesn't seem correct: http://domain.com/form60java/oracle/forms/registry/Registry.dat
    I'm expecting a slash (/) between forms60 and java. Have a look in the formsweb.cfg if any paths are misconfigured.
    Also, try if the URL with the slash:
    http://domain.com/form60/java/oracle/forms/registry/Registry.dat
    does work when you just paste it in a browser. It should download the Registry.dat file

  • URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

    I have tried the Security Realm of Tomcat. Since I do not have
    an LDAP server, I decided to use the Tomcat-users.xml file in
    Tomcat\conf directory.
    I added the following lines of code in the web.xml file.
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>Entire Application</web-resource-name>
    <url-pattern>/*</url-pattern>
    </web-resource-collection>
    <auth-constraint>
    <!-- NOTE: This role is not present in the default users file -->
    <role-name>webviewer</role-name>
    </auth-constraint>
    </security-constraint>
    <login-config>
    <auth-method>BASIC</auth-method>
    <realm-name>Tomcat Manager Application</realm-name>
    </login-config>
    The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
    <tomcat-users>
    <user name="test" password="password" roles="webviewer" />
    </tomcat-users>
    So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
    But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
    Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
    URGENT HELP NEEDED ... I need to get back to my client on this.
    Help would be v. much appreciated.

    In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
    Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
    Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

  • Urgent help needed with un-removable junk mail that froze Mail!!

    Urgent help needed with un-removable junk mail that froze Mail?
    I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
    When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
    I repaired permissions, it did nothing.
    I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
    Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

    Hi Nigel
    If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
    Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
    If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
    The shift key starts Mail in a sort of Safe mode.

  • Urgent help required in migration

    Hello,
    I am stuck on 77% of r3load process my all 15/16 processes are finished successfully only one process has failed I have cut paste the log (SAPAPPL1.log) below of the same. Request your urgent help.
    DbSl Trace: Connecting via TNS_ADMIN=/oracle/F01/920_64/network/admin, tnsname=F01
    DbSl Trace: Got NLS_LANG=AMERICAN_AMERICA.US7ASCII from environment
    DbSl Trace: Now I'm connected to ORACLE
    DbSl Trace: Database instance F01 is running on e027pae0 with ORACLE version 9.2.0.7.0
    trying to restart import ###
    (RIM) INFO: table "BKPF" truncated
    restart finished ###
    #START: 20070530101004
    TAB: BKPF
    (RD) ERROR: missing last block number for table "BKPF" in directory file "/sapcd/EXPDIR/DATA/SAPAPPL1.TOC"
    #STOP: 20070530101004
    Thanks & Regards,
    Bhushan

    Did you split the files?
    It seems that export file for this table got corrupt.
    Unfortunately, you ahve to start again. I had a similar problem and had to do it again.

Maybe you are looking for

  • T520 upgrade hard drive and memory

    I just read a similar thread, but it's a year old and I'd like to see the current recommendations. Here is my configuration: Screen Size 15.6 inches Screen Resolution 1366 x 768 Processor 2.5 GHz Core i5-2520M RAM 8 GB DDR3-SDRAM Memory Speed 1333 MH

  • How do you open a .sit file

    Hi downloaded a compressed(zipped) multimedia file formatted for mac. File should include PDF documents and some video. It's a ".sit " file type. I can't figure out how to open it. I have tried saving it to the desk top with no use. All i see is a ju

  • GTX 560 unable to render effects preview in CS6?

    I'm using a GTX 560 with the "hack" to allow for GPU acceleration in CS6, and it generally works fine.  But every time I try to "render effects in to out", I get an error message.  I tried rendering with GPU acceleration disabled, and it works fine. 

  • Cursor issues in Word and Outlook after Adobe 9 pro trial download - any advice  - really annoying!

    Hi, have downloaded Adobe Professional 9 as a trial and am looking to buy it (work with a charity). Did use Foxit phantom Pro and had no issues much considering its a cheap copy, but had to change to adobe so it was compatible with a colleagues syste

  • Firefox clears all history at every restart

    version 3.6.10 at every restart, all browsing history and usernames that were stored are reset to default. Also, when downloading video in e-mail, maybe 35 to 50% of video will load and play. But 100% audio will play. Not having any luck finding a pl