Start program before login

Hi,
I'm trying to run a mac-mini with no keyboard and mouse connected to a TV. I'd like to use my iPhone for control from the couch. This works fine if the autologin option is enabled as the server program the iPhone talks to loads when I login.
What I'd like is for the program (touchmouse server) to start before I log in. Anyone have any ideas how to make this program start before I login?
Thanks in advance.
Pedro

I would suggest making your program a service in Windows 2000. Microsoft sells the WIndows 2000 Resource kit which has some utilities to convert any executable to a service. I think there are some shareware utilities as well. Then, make sure your service has a taskbar interface (a cute little icon in the taskbar next to the clock). This may have to be done with some external programming, but I am not sure on this. You will also need to make sure that the NI-DAQ service starts before your service. I think this can be done with some registry edits.
If you get this finished and working well, please post back how you did it so that we can share this knowledge with other users of LabVIEW.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

Similar Messages

User experience of Start Before Login?

If you enable this ability, does it remove the ability to start VPN without logging out of Windows? In other words, can they log in both ways or does it take the place of starting the Cisco Anyconnect Secure Mobility Client 3.1 from within Windows XP or Windows 7?
There are some users who say if they are working locally on their laptop at home and then later decide to connect to VPN to access a file share or intranet web site, it will be a huge hassle for them to have to close all their open applications, log off and then log back on just to start the VPN.
What if they use SBL to start VPN and their connection gets dropped later? Will they have to log out of Windows to get reconnected?
It will be much easier to keep the local login credentials in sync with the domain and receive certain group policies if SBL is enabled, but if it adds a lot of other inconvenience, it may not be worth it.
Can we have users continue to connect they way they normally do from the Windows desktop and then use SBL whenever needed (such as if they forgot the old cached Windows password and needed to login with their current password)?
Pros and cons? Is it more or less convenient to have Start Before Login enabled?

I would recommend reading the following information.
ASA 8.X: AnyConnect Start Before Logon Feature Configuration
Configuring Start Before Logon
Portu.

Win 7/Z580: Black screen on boot up, before login screen?

Win 7/Z580: Black screen on boot up, before login screen?
=======================================
I find some interesting posting in this forum. Thanks for keeping this forum to help windows/Lenovo community. I like to pick up the brain of this forum to resolve the black screen issue. I am not sure, whether it caused by virus. I use Microsoft Security Essentials. I am not able to run this in command prompt.
I started my laptop this morning & login screen showed up. Once I entered my login credentials, I heard the sound that usually plays once a login is successful, but I ended up with a black screen. After this occurred, I had to hold down the power button to manually shut down the computer. Once I started it up again, I was prompted to do a system repair, which eventually ended up with all successful outcomes, but I now have a black screen with a cursor before the login screen now. I have no idea what caused this to happen. My laptop is a Lenovo Ideapad Model Z580 (500 GB HD, 6GB RAM).
I am not able to get into safe mode or any other mode, which all leads to a black screen described above. I am able to use the "Repair Your computer" tools after pressing F8 during booting only . All other options leads to Black screen with cursor in the middle
Last Known Good Configuration leads to same
Enable Low Resolution Video (640x480) leads to same My Z580 is not responding to CTRL+ALT+DEL Windows Logo keys as well.
**** I tried SAFE Mode. It loaded couple of drivers and paused at CLASSPNP.SYS load. It went to Black screen with cursor at center.
I am able to invoke control pannel from Command prompt of working PC by typing control.
Z580 PC is not responding to control from command prompt (under Repair Your computer) either.
Z580 is able to use the "Repair Your computer" tools after pressing F8 during booting .
Under local user login it provided Start Repair option. As I pick this option, I got the following. Problem signature
Startup repair offline
1 - 6.1.7600.16385
2 -
6.1.7600.16385
3 - unknown
4 - 21200332
5 - autofailover
6 -
4
7 - NoRootCause
os v - 6.1.7600.2.1.0.2561
locale id – 1033
Under Admin user login, it provided system recovery options. It is not picking up the recovery point created a while ago.
Windows Memory Diagnostics is not launching and shows a black screen without cursor.
I am able to get into command prompt. I tried the following there.
I am not able to run cmd as admin
I reviewed the past posting of this forum on this subject.
Windows 7 boots to an unresponsive black screen with mouse cursor...
System File Checker: Run sfc /scannow & analyze its logs in Windows 7 / 8
Windows Resource Protection could not start the repair service
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program generates in Windows Vista
Force SFC to Run in Windows 7
Windows Resource Protection found corrupt files but was unable to fix some of them
SFC /SCANNOW showed up
"Windows Resource Protection could not start the repair service
I did "net start trustedinstaller"
"Windows Resource Protection detected pending repair restart the computer"
I ran repair options using sfc /scannow /offbootdir=x:\ /offwindir=D:\windows
and got "Windows Resource Protection found corrupt files but was unable to fix some of them "
I did findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >sfcdetails.txt I will be glad to attach the zip file that contain CBS.LOG & [SR] tag extract (xxx.txt).
I did not any find ERRORS there, SFC ended with message saying "found corrupt files but was unable to fix some of them" . It is misleading. There is no [SR] tag pointing to corrupt files. Does SFC through false positive like this?
I ran chkdsk. ResultsFile verification completed.
0 bad file records processed.
0 EA records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
Windows has checked the file system and found no problems.
0 KB in bad sectors.
Failed to transfer logged messages to the event log with status 50.
It is puzzling me.
Thanks for helping.

I tried these steps 8/7/2015. I ran chkdsk. Results for D:\
File verification completed.
0 bad file records processed.
0 EA records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
Windows has checked the file system and found no problems.
0 KB in bad sectors.
Failed to transfer logged messages to the event log with status 50.
Updated on 8/7
============
Here are my HDD config:
Volume ### Ltr Label Fs Type Status Info
Volume 0 F WDO_Media64 UDF DVD- Healthy
Volume 1 C NTFS Partition Healthy
Volume 2 D Windows7_OS NTFS Partition Healthy
Volume 3 E LENOVO NTFS Partition Healthy
Volume 4 G FAT Removable Healthy
Volume 5 LENOVO_PART NTFS Partition Healthy Hidden
I ran CHKDSK /F /X for C, D, E. All resluted to "Windows has checked the file system and found no problems."
F8 ===> Repair Computer===> Command Prompt ===> Works OK
F8 ===> Repair Computer===> Start up Repair ==> Results into "Startup repair could not detect a problem"
F8 ===> Repair Computer===> System Restore ===> "No restore points has been created on yout computer system drive"
F8 ===> Repair Computer===> System Image Recovery ===> "Windows cannot find a system impage on this computer"
F8 ===> Repair Computer===> windows Memory Diagnostiyics ===> "Black screen with Cursor in the middle"
After getting into Command prompt
I run net user
User accounts for \\
Administrator Guest
The command completed with one or more errors
It did not list other users in my laptop. I do not know why? I tried under F8 ===> Repair Computer===> Command Prompt ===> Works OK
Here is the result:
- Boot with Last Known Good Configuration (F8 menu) ===> Black screen with cursor in the middle
- Restore to a prior date (System Restore) - System Restore ====> Already reported in previous reply
- Try a clean startup Troubleshoot Application Conflicts by Performing a Clean Startup results in
Clean Start up
D:\Windows\System32>runas /user:administrator msconfig
Enter the password for administrator:
Attempting to start msconfig as user "MININT-84TH5FG\administrator" ...
RUNAS ERROR: Unable to run - msconfig
1060: The specified service does not exist as an installed service.
- Try loading defaults in BIOS - F2 ==> f9 ==> f10 ===> Black screen with cursor in the middle
Check if explorer.exe is running and start from CTRL+ALT+DEL (task manager - new task) ===> CTRL+ALT+DEL not responding
Is anybody in this forum point me to fix? Thanks for looking into this issue.

ISE 1.2 and Posture Report Before Login

Hi everyone,
Is it possible for the ISE 1.2 NAC/Posture agent to submit a posture report before user login on a Windows desktop system?
We're trialling ISE 1.2, performing machine based authentication using EAP-TLS/Certificates. On top of this we are also using the posture agent and do not grant access until a 'compliant' posture report is received.
Currently when a desktop powers up the posture status is 'pending' and this does not change until the user logs in, the NAC agent submits a successful posture report. This can take quite a few minutes leaving the user in a state of limbo where they have logged in to the computer but they must wait for the posture report.
I see the NacAgent service runs as system, but the NACAgentUI.exe does not and only starts with the user logs in.
Thanks,
Mark

That is correct, the nac agent is unaware of what policies exist in your ISE design. It's sole purpose is to start when the services allow it to do so and then send the information about the services and AV information it can gather so ISE can make a decision on whether the client is compliant or not compliant, it can then take direction on how to remeidate the client when it fails. There is nothing you can configure from ISE that will allow you to run the nac agent before user login.
In the end when the nac agent makes into the anyconnect secure mobility client you might have hope there since there are some start before login vpn features, but I do not see the nac agent adopting this any time soon. You should however still work with your Cisco Account team on doing some research with the BU on your behalf, this could benefit alot of nac customers.
thanks,
Tarik Admani
*Please rate helpful posts*

Serial number off pkg is not accepted to start program

Serial number is not accepted to start program. serial number is off of pkg as requested.

Call Applecare, though with FCS years out of date, they may want to charge you to trouble shoot.
A couple of things to verify before you call them -
1. Make sure you have a full (not upgrade) version.
2. Make sure you are entering the numbers correctly. look VERY closely at the numbers and letters to make sure you don't mistake a 1 for I and 0 for O.
I find it useful to read them out load when entering. It may be helpful to have someone else read/ check the serial along with you.
Good luck,
x

Starting a remote login through ABAP

Hello!
First of all, I am a beginner in ABAP :).
Now the question - I have registered a remote R/3 system in SM59 and the remote login works. Is it now possible to start the remote login for that particular system through an ABAP program? If so how do I do it?
Any links to tutorials, articles or code examples will also of course be helpful..
Bye!
Sameer

hi
see the below links
MM links:
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
SD links
detailed business flow of SD MODULE INCLUDING all major tables and field
Need material regarding the Genereal Business Flow of SD, MM, PP, FISL & CO
http://www.sap-basis-abap.com/sapsd.htm
http://www.sapgenie.com/abap/tables_sd.htm
http://help.sap.com/saphelp_46c/helpdata/en/8c/df293581dc1f79e10000009b38f889/frameset.htm
Check these pdfs:
SD Workflow:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSD/BCBMTWFMSD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMLO/BCBMTWFMLO.pdf
rewards points if helpful
regards
sreeni

How to use Any connect before login windows?

Dear All,
Right now i have issue on Any connect VPN, all my clinet join Domain and i want connect any connect VPN before login windows. i mean that all user and password veryfy from DC. Is any connect VPN can do connect before windows loggin?
Best Regards,
Rechard

http://www.google.co.uk/search?q=cisco+anyconnect+start+before+logon&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00809f0d75.shtml
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect22/administration/guide/22admin4.html
HTH>

Change TrackPad(Click= Tab) before login

Hi all,
Is it possible to change trackpad behaviour before login into my account?
Currently the trackpad is set to "Click" but I want it set to "Tap" before logon.
Once I'm logged on it is working ok so it's basically only setup for my user account via (System Preferences>Trackpad>Point&Click)
I've searched this discussion forum but only found not properly working trackpads, I have no issues with my trackpad.
OS X Version 10.9.4
MacBook Pro Retina, 13-inch, late 2013

“Tap to Click is a user specific preference, just like your Desktop picture or Screensaver. If you log out of your account, you won't be able to tap to click at the logout screen. In addition, when you start up to the Install DVD or Apple Hardware Test, the Tap to Click feature won't be available.”
http://support.apple.com/kb/HT4331

Error - Start Program BBP_LOCATIONS_GET_ALL

Dear All,
Iam getting this Error - Start Program BBP_LOCATIONS_GET_ALL , when iam trying to display already existing org.unit in PPOSA_BBP.
What all the prequistes to be checked before running this BBP_LOCATIONS_GET_ALL programme , or any other alternative to solve this error.
Thanks & Regards,
Gopal

Gopal,
Try to run report BBP_ATTR_XPRA400. This report does the conversion all the organisation structure attributes. Also report BBP_LOCATION_MIGRATION_SET will unlock your plant replication program, if there exists one.
PLease assign points for helpfull answers
Thanks
Sundeep

Start program BBP_LOCATIONS_GET_ALL first Error

Hi, Friends,
I am new to SRM, and facing some problem with shopping cart.
First I have created a user with SU01, then given the role of mySAP SRM Operational Purchaser.
After that using Tcode users_gen and Create Users from Existing SU01 Users I have generated EBP user for that user.
Then in the mySAP portal I cant use any steps including Shop, Check Status, Approval or anything else.
When I clicked the settings then I got this massage :
Note
The following error text was processed in the system EBI : Start program BBP_LOCATIONS_GET_ALL first (see Note 563180 and long text)
The error occurred on the application server dewall41_EBI_00 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
Form: CHECK_MIGRATION_RUN of program SAPLBBP_LOCATION
Function: BBP_LOC_ATTR_V5502A_COMPLETE of program SAPLBBP_LOCATION
Method: ATTRIBUTES_READ_LOCAL_5502 of program CL_BBP_ATTR_SCENARIO==========CP
Method: ATTRIBUTES_READ_LOCAL of program CL_BBP_ATTR_SCENARIO==========CP
Function: RHGA_READ_ATTRIBUTES_EXT of program SAPLHRBAS00GENATTR_RUNTIME
Form: READ_ATTRIBUTES_EXT of program SAPLBBP_ATTR_PDORG
Function: BBP_ATTR_MAINT of program SAPLBBP_ATTR_PDORG
Form: ATTR_READ of program SAPLBBP_UM_UI
Module: INIT_TRANSACTION of program SAPLBBP_UM_UI
Please Help.
Regards Amit.

Hi Amit,
Here are the details given in the OSS Note:
Summary
Symptom
Locations as of EBP 4.0 - plant replication
As of EBP 4.0, a business partner of type location must exist for every R/3 plant; for this reason, the plants must be replicated from all R/3 Backend systems known in the system.
The system does not start an EBP application before the replication has not been executed successfully; the program terminate themselves and the system refers to this note with an error message.
If you upgrade from BBP 2.0B or BBP 2.0C, you must first convert the old 'Shopping carts' so that the program plants described here can convert to locations. Use the BBP_TRANSFORM_SCS report for the conversion (see also note 481100).
Process:
The replication must be explicitly triggered by means of program BBP_LOCATIONS_GET_ALL.
This program checks first whether the system in question is an upgrade system, and if necessary it checks whether XPRA BBP_ATTR_XPRA400 was terminated with errors (in this case, BBP_LOCATIONS_GET_ALL terminates and has to be restarted after a successful run of the XPRA).
After the XPRA check, the system determines from table BBP_BACKEND_DEST all backend systems that can be accessed by RFC.
Then the system reads all locations already existing in the EBP in order
to convert any existing data in a legacy system
to obtain comparison values to avoid duplicate records (identical data records with different partner numbers)
Then the system imports the data for the plants from all back end systems determined before, compares them with the existing master records and either adds mapping entries or generates new business partners accordingly.
In upgrade systems the following activities are also carried out:
Conversion of the favorites (user-specific values for the last used business partners of the type location from table BBP_GRCPLANT_FAV)
Conversion for user attributes WRK and REQUESTER (the business partner number is added to attribute WRK, the logical backend system is added to attribute REQUESTER)
Conversion of the legacy documents (an entry with partner function 'Location' must be added to references 'Backend plant'; entries with business partner of type location as the ship-to party must be deleted and also an entry with partner function 'Location' must be added)
If all subtasks could be executed without errors, the program finally sets the transaction authorization (that is, as of this time it is possible to start 'normal' EBP transactions as, for example, the shopping cart, again).
The transaction authorization consists of a 'switch' in table T77S0 (GRPID = EBP and SEMID = LMIGR) which is delivered with value '0'.
As long as this value is not set to 'X', all EBP transactions terminate themselves.
Success/warning/error messages in program BBP_LOCATIONS_GET_ALL are stored in application log BBP_LOCATIONS_GET (Transaction SLG1).
Setting the transaction authorization manually:
The customer can decide to set the 'switch' in table T77S0 to 'X' and to allow the work start under the following circumstances:
Only one error has occurred, this should be ignored
One of several back ends broke down during an upgrade or during an installation, and a postponement of the system start cannot be allowed.
Troubleshooting is not possible/required.
This is only a local scenario (which should actually not exist because at least an FI R/3 Backend system should exist) so that a replication of plants is not possible.
For this purpose, program BBP_LOCATION_MIGRATION_SET is availbale which sets required value 'X' in table T77S0 (if the program was started inadvertently, the original value can be restored using BBP_LOCATION_MIGRATION_RESET).
If the replication from a backend system could not be executed it is possible to repeat this step at a later time via program BBP_LOCATIONS_GET_FROM_SYSTEM for exactly this R/3 system.
If only single plants cannot be replicated (for example due to inadequately maintained data), they can be copied to the EBP after being revised with program BBP_LOCATIONS_GET_SELECTED (the program can also be used during normal operation to transfer new plants to locations).
You can also create individual locations via the Web transaction 'Managing Business Partners' and assign them to an R/3 plant.
Other terms
Location, business partner, delivery point, plant, component, procurement, Business-to-Business, Ecommerce, e-commerce, Web, SAP Business-to-Business Procurement BBP, Business to Business, electronic commerce, e-business, Ebusiness, Internet, New Dimension, EBP, SAP Enterprise Buyer, Enterprise Buyer professional edition, SRM, Supplier Relationship Management
Reason and Prerequisites
IMPORTANT:
This note does not apply to your R/3 system
It only applies to EBP 4.0 and higher
For upgrades from BBP2.0B and BBP2.0C, you must first execute the BBP_TRANSFORM_SCS report (Note 481100)
Solution
Proceed as described above.
Header Data
Release Status: Released for Customer
Released on: 25.07.2005 06:48:45
Master Language: German
Priority: Recommendations/additional info
Category: Upgrade information
Primary Component: SRM-EBP-ADM-XBP External Business Partner
Secondary Components: SRM-EBP-SHP Shopping Cart
Affected Releases
MDM 200 200 200
COM_CRMMDM 40 4.0 4.0
UIFRW 40 4.0 4.0
SRM_SERVER 500 500 500 X
SRM_SERVER 550 550 550 X
SRM_SERVER 600 600 600 X
SRM_SERVER 700 700 700 X
CGVMIC 10 100 100
BBPCRM 4.0 400 400 X
Related Notes
872533 - FAQ: Middleware
737800 - Enhancements to upgrade on SAP CRM 4.0 SR1
618400 - Support Package 01 for SRM 3.0
481100 - EBP: Upgrade to Release 3.0A: Conversion of shopping carts
Thanks,
Pradeep

Can you automatically start programs when you switch on your imac

can you automatically start programs when you switch on your imac

Yes, go to: Apple / System Preferences / User Groups / Login Items and add the Application to the list of things automatically set to start at login.
However, you should limit it to those that you need or use, because adding a lot will needlessly slow down your startup time and use more RAM.
Message was edited by: den.thed
Oop' late on the draw again, glad your question is answered.

Starting programs with Audigy4Pro RC

Hi. Is there a way to start programs with the remote control? It was very useful in Audigy2 Platinum eX...but in Audigy4 it's missing!?

Start your stuff before you actually start xfce:
/usr/bin/devilspie ~/.devilspie/DesktopConsole.cs &> /dev/null &
gnome-terminal --window-with-profile=DesktopConsole --title=DesktopConsole3 &
gnome-terminal --window-with-profile=DesktopConsole --title=DesktopConsole &
gnome-terminal --window-with-profile=DesktopConsole2 --title=DesktopConsole2
startxfce4 &

Rescue and Recovery 4.2 Does not Launch from Start Programs Thinkvantage

I have a T61 with XP SP3. I recently installed and uninstalled the version of Ubutuno that can be booted from Windows. I played with it for a few days then uninstalled it. Then I unistalled Rescue and Recovery using Add Remove programs...I am thinking of getting a SSD and I wanted to remove large programs before I image the disk.
I changed my mind and tried to reinstall Rescue and Recovery. I got the error saying that my boot space was too small. I used the Lenevo mbr repair feature that I found on this board.
I was then able to install R&R 4.21, and I was able to create recovey disks using the create recovery disks program
However, when I try to launch Rescue and Recovery, (Start, Programs, Thinkvantage, Rescue and Recovery). the disk spins and I get the hour glass on the cursor...and the hour glass goes away after about 7 seconds...the disk continues too blink off and on, but the program will not launch. The rrservice.exe and rrpservice exe services are running. I tried disabling Kapernsky virus, and that did not help. I have rebooted several times.
Any suggestions! I will buy you a beer for sure!!
Thanks
Jeff

My other post just gave you the basics. I got tired to typing the same info over and over.
Two issues lately.
(1) I am going from vista to win7, and I have a Factory shipped Lenovo. RNR wont install.
(2) I have win7 on a factory ship, and I want to go from Hdd to SDD. USB recovery wont boot.
==
I take my backups to a 2nd HDD. Also, every few months, I backup to a DVD set, HDD's may last 3 years, maybe 4. You dont want your loved backup on the C drive, and HDD fails. On top of that, if you back up to the C drive, the HDD grinds away. Read C, write to C\rrbackups. Backup will run faster to 2nd HDD or USB.
===
You state a pristine Vista. I am guessing it was a Factory shipped Lenovo with Vista.
The TIP in the other post is if you know of this issue BEFORE windows 7 install.
At the time during Win 7 install, and it is deciding where to put itself, there is a Default Recommended and I think a drop down list of other options. This is tricky. Example, (a). park me in the current C partition. (b) park me on the whole HDD.
Did you upgrade the Vista, inplace to win7 or did you clean install win7 to a blank C partition.
Lets see if you have a recovery(vista) partition.
Go to control panel>admin tools>computer management>disk management. Check to see if other partitions show up other than the C drive. Recovery partition should be around 10 GB. Sometimes this partition is labeled IBM_Preload or similar.
Solution/workaround
I dont have 1 that i have tested. Maybe other users can offer suggestions.
(1)You could delete the Q, but this might not clean up the MBR/BCD(boot control) entries.
(2) Backup your loved win7, erase HDD, then restore. MAYBE a win7 backup allows ignoring the Q partition. I am not an expert with using win7 backup, and I dont have a q drive.
*** all this is time consuming**, risky, and may not solve the issue.

Start CalcScript befor loading data

How can I start CalcScript befor load data?
I want clear slice in cube befor load data.
Example:
I export data with period Jan, Feb, so I must clear data in Essbase cube only fo period Jan, Feb. In the case when I export data for period Mar, I want clear data with period Mar.
I don't want use maxl because in a maxl script I must specify login and password.
Thanks a lot.
Gelo

Hi,
The best way is to duplicate the KM - "IKM SQL to Hyperion Essbase (DATA)"
Edit command "Load data into essbase" of the KM
Update
sql= """select <%=od.....
to
sql= ""
Now you can create an interface, set staging as "SUNOPSIS MEMORY ENGINE" and just drop the essbase dataload datastore on to the target, set the KM to the one you just updated.
Then use the calc script options, so you have an interface that does not need a source and can run CALC scripts.
Ok? Correct :)
Cheers
John
http://john-goodwin.blogspot.com/

Starting Program on Computer Startup

I have an executable LabView program that I would like to start running automatically when the computer is started. How can I do this? Thanks for the help.

In order to answer your question a few more details are needed. What is your OS? Are you using some flavor of Windows or some other OS? If Windows then you can start the program at login by including a shortcut in the Startup folder. You can access this by right clicking on the start button and clicking open and then going to the startup folder (which will probably be under the programs folder). Depending on the flavor of Windows you may be able to set the program to start for some users and not for others or to start for all users.

Start program before login

Similar Messages

Maybe you are looking for