?(Start) Routine to fill a flag for all Y_ID_i where X_IDij is max value

Just one sentence: How can i write a routine to fill an infoObject with value "X", for the max value key_id X_IDij of every foreign key Y_ID_i.
> More explanation------>
I have such data rows in cube with main keys Xi and foreign keys Yi, characteristic Ci
row1: X1   Y1 C1
row2: X2   Y1 C2
row3: X3   Y1 C3
row4: X4   Y2 C4
row5: X5   Y2 C5
row6: X6   Y2 C6
row7: X7   Y3 C7
row8: X8   Y3 C8
row9: X9   Y3 C9
I want to display in the query for every foreign key Yi the once row with max Xi: Max from (X1, X2, X3); Max from (X4, X5, X6)..
Those rows that will be displayed in query are row3, row6 and row9 because by Y1, X3 is the maximal value, for Y2 is X6 and for Y3 is X9.
How can i select those row in the query. So that, only one row (with max X) is diplayed for every foreign key.
Thanks for helping.
Arnaud
Edited by: Arnaud on Aug 18, 2009 7:00 AM
Edited by: Arnaud on Aug 18, 2009 1:17 PM
Edited by: Arnaud on Aug 27, 2009 9:45 AM

Hi Arnaud,
You can use the below code in your start routine -
DATA : IT_TAB TYPE DATA_PACKAGE OCCURS 0.
IT_TAB[] = DATA_PACKAGE[].
SORT IT_TAB BY Y DESCENDING X.
DELETE ADJACENT DUPLICATES FROM IT_TAB COMPARING Y X.
LOOP AT DATA_PACKAGE.
READ TABLE IT_TAB WITH KEY X=DATA_PACKAGE-X
                                                      Y=DATA_PACKAGE-Y
                                                      Z=DATA_PACKAGE-Z
                                         BINARY SEARCH.
IF SY-SUBRC EQ 0.
    DATA_SOURCE-FLAG = 'X'.
    MODIFY DATA_SOURCE.
ENDIF.
ENDLOOP.
Here we are assuming that your data package contains the additional field FLAG.
Regards,
Saurabh

Similar Messages

ABAP Code Problem in Start Routine to Fill the value from Look-up Table ???

Hi all,
     I am trying to fill the values of DOC_NUMBER & PLANT from look-up table /BIC/AZSD_O0700 (Billing Item ODS) for each BILL_NUM in Start Routine for Update Rules of Billing Header ODS and modify the data_package.
What is wrong with the below ABAP code, PLEASE ???
data: it_data type standard table of data_package_structure
        with header line
        with non-unique default key initial size 0.
types: begin of billing_item_type,
             BILL_NUM          like /BIC/AZSD_O0700-BILL_NUM,
             DOC_NUMBER   like /BIC/AZSD_O0700-DOC_NUMBER,
             PLANT               like /BIC/AZSD_O0700-PLANT,
         end of billing_item_type.
refresh it_data.
clear it_data.
it_data[] = DATA_PACKAGE[].
refresh DATA_PACKAGE.
clear DATA_PACKAGE.
loop at it_data.
    select DOC_NUMBER PLANT into (it_data-DOC_NUMBER, it_data-PLANT)
           from /BIC/AZSD_O0700
           where BILL_NUM = it_data-BILL_NUM
           and    FISCVARNT = it_data-fiscvarnt.
    endselect.
    if sy-subrc = 0.
       move-corresponding it_data to DATA_PACKAGE.
    endif.
endloop.
modify DATA_PACKAGE.
Thanks,
Venkat.

Hi Venkat,
Two things -One is the performance and the other ... there is no Append within the loop.
Try moving the select statement ousdie the loop to improve performance and move the modify statement into the loop ... change modify to append. Code below.
   Let me know if you need more help.
Best regards,
Kazmi
data: it_data type standard table of data_package_structure
with header line
with non-unique default key initial size 0.
types: begin of billing_item_type,
BILL_NUM like /BIC/AZSD_O0700-BILL_NUM,
DOC_NUMBER like /BIC/AZSD_O0700-DOC_NUMBER,
PLANT like /BIC/AZSD_O0700-PLANT,
end of billing_item_type.
refresh it_data.
clear it_data.
it_data] = DATA_PACKAGE[.
refresh DATA_PACKAGE.
clear DATA_PACKAGE.
loop at it_data.
select DOC_NUMBER PLANT into (it_data-DOC_NUMBER, it_data-PLANT)
from /BIC/AZSD_O0700
where BILL_NUM = it_data-BILL_NUM
and FISCVARNT = it_data-fiscvarnt.
endselect.
if sy-subrc = 0.
move-corresponding it_data to DATA_PACKAGE.
Append DATA_PACKAGE.
endif.
endloop.

ABAP Code in Start Routine to fill a field

Hello,
with the following code in the start routine in BW3.5 I am trying to fill Intercompany-Indicator based on Distribution Channel. The main code is marked bold.
Distribution Channel = DISTR_CHAN
InterCompany-Indicator = G_CWWR14
Pls help. Thanks.
SD
Intercompany Indicator
    IF NOT wa_daten-customer IS INITIAL.
      SELECT SINGLE /b05/s_rbkunde FROM /b05/mrbcust INTO l_rbcust
             WHERE /b05/s_rbcust = wa_daten-customer
             AND    objvers        = 'A'
             AND    datefrom      <= l_date
             AND    dateto        >= l_date.
      IF sy-subrc EQ 0.
        SELECT SINGLE g_cwwr14 FROM /b05/mrbkdbkrs INTO l_ii
               WHERE comp_code        = wa_daten-comp_code
               AND    /b05/s_rbkdbkrs = l_rbcust
               AND    objvers          = 'A'
               AND    datefrom        <= l_date
               AND    dateto          >= l_date.
        IF sy-subrc = 0.
          wa_daten-g_cwwr14 = l_ii.
        ELSE.
          CLEAR wa_daten-g_cwwr14.
        ENDIF.
      ELSE.
        CLEAR wa_daten-g_cwwr14.
      ENDIF.
    ELSE.
      IF wa_daten-G_CWWR14 = ' '.
        CASE wa_daten-DISTR_CHAN.
          WHEN 'Y4'.
            wa_daten-G_CWWR14 = '4'.
          WHEN 'Y5'.
            wa_daten-G_CWWR14 = '2'.
          WHEN OTHERS.
            wa_daten-G_CWWR14 = '0'.
        ENDCASE.
      ENDIF.
    ENDIF.      " NOT wa_daten-customer IS INITIAL
    MODIFY DATA_PACKAGE FROM wa_daten.
ENDLOOP.

Hi Venkat,
Two things -One is the performance and the other ... there is no Append within the loop.
Try moving the select statement ousdie the loop to improve performance and move the modify statement into the loop ... change modify to append. Code below.
   Let me know if you need more help.
Best regards,
Kazmi
data: it_data type standard table of data_package_structure
with header line
with non-unique default key initial size 0.
types: begin of billing_item_type,
BILL_NUM like /BIC/AZSD_O0700-BILL_NUM,
DOC_NUMBER like /BIC/AZSD_O0700-DOC_NUMBER,
PLANT like /BIC/AZSD_O0700-PLANT,
end of billing_item_type.
refresh it_data.
clear it_data.
it_data] = DATA_PACKAGE[.
refresh DATA_PACKAGE.
clear DATA_PACKAGE.
loop at it_data.
select DOC_NUMBER PLANT into (it_data-DOC_NUMBER, it_data-PLANT)
from /BIC/AZSD_O0700
where BILL_NUM = it_data-BILL_NUM
and FISCVARNT = it_data-fiscvarnt.
endselect.
if sy-subrc = 0.
move-corresponding it_data to DATA_PACKAGE.
Append DATA_PACKAGE.
endif.
endloop.

Filtering records using a start routine inside the update rules for a dmart

Hi
I am using a start routine inside the update rules. I want to filter out all records that have 0 in all three fields. My problem is that it not only filters these records, but also filter records with negative values, which I do not want. Only 1 field has a negative value, the other 2 have 0.
I have tried:
DELETE DATA_PACKAGE where /BIC/ZBILLCONS = 0 and /BIC/ZBREVPRIM = 0 and /BIC/ZBREVSUBO = 0 .
DELETE DATA_PACKAGE where ( /BIC/ZBILLCONS = 0 and /BIC/ZBREVPRIM = 0 and /BIC/ZBREVSUBO = 0 ).
also tried:
delete DATA_PACKAGE where /BIC/ZBILLCONS IS INITIAL and
/BIC/ZBREVPRIM IS INITIAL and /BIC/ZBREVSUBO IS INITIAL.
The records are going to 1 cube and 1 ODS, I only have the start routine in 1 update rule. I view the filtering in the PSA.
Has anyone ran into this before?

Try
delete data_package where /BIC/ZBILLCONS = '0' and /BIC/ZBREVPRIM = '0' and /BIC/ZBREVSUBO = '0' .
OR
delete data_package where /BIC/ZBILLCONS EQ '0' and /BIC/ZBREVPRIM EQ '0' and /BIC/ZBREVSUBO EQ '0' .
Good luck!

Select fom table for all entries where field starts with value

Hello
I want to write a select like this
select * from bsis
into lt_bsis
for all entries in lt_itab
where xblnr like lt_itab-belnr%
I want to select all the entries from bsis where the field xblnr starts with the values found in lt_itab-belnr.
for example
ls_itab-belnr = 5100000028
bsis-xblnr = 510000002810001
                    510000002810002
                    510000002810003
                    520000002810001
and i want to select only the entries that start with 5100000028 in this case
Can anybody help?
Thanks

Hi,
I hope below example code will help you to fix your issue,
REPORT ytest.
TYPES : BEGIN OF ty_typ1,
          val TYPE i,
        END OF ty_typ1.
TYPES : BEGIN OF ty_typ2,
          val1 TYPE hrobjid,
          val2 TYPE hrobjid,
        END OF ty_typ2.
DATA : int_typ1 TYPE TABLE OF ty_typ1,
       int_typ2 TYPE TABLE OF ty_typ2,
       wa_typ1 TYPE ty_typ1,
       wa_typ2 TYPE ty_typ2,
       int_1001 TYPE TABLE OF hrp1001,
       wa_1001 TYPE hrp1001.
REFRESH : int_typ1, int_typ2, int_1001.
CLEAR : wa_typ1, wa_typ2, wa_1001.
wa_typ1-val = 500001.
APPEND wa_typ1 TO int_typ1.
wa_typ1-val = 500002.
APPEND wa_typ1 TO int_typ1.
wa_typ1-val = 500003.
APPEND wa_typ1 TO int_typ1.
wa_typ1-val = 500001.
APPEND wa_typ1 TO int_typ1.
SORT int_typ1 ASCENDING BY val.
DELETE ADJACENT DUPLICATES FROM int_typ1 COMPARING val.
LOOP AT int_typ1 INTO wa_typ1.
wa_typ2-val1 = ( wa_typ1-val * 100 ) + 1.
wa_typ2-val2 = wa_typ2-val1 + 98.
APPEND wa_typ2 TO int_typ2.
CLEAR : wa_typ1, wa_typ2.
ENDLOOP.
SELECT * FROM hrp1001 INTO TABLE int_1001
         FOR ALL ENTRIES IN int_typ2 WHERE
             plvar EQ '01'          AND
             otype EQ 'S'           AND
             sclas EQ 'O'           AND
             begda LE sy-datum      AND
             endda GE sy-datum      AND
             objid GE int_typ2-val1 AND
             objid LE int_typ2-val2.
LOOP AT int_1001 INTO wa_1001.
WRITE : / wa_1001-objid.
ENDLOOP.
Thanks & Regards,
Harish Kumar N

Set the Unicode check flag for all programs.

Hello friends,
We are now upgrading our ecc6 system to unicode. The problem is that all our programs
are not flaged for unicode checks and there for have syntax errors. I now how to mark
this flag for a single program but how can I do it to all programs?
I realy need your help.
Thanks in advance,
Gershon.

Hi Gershon,
In general, transaction UCCHECK is designed to cover all Unicode adaptations needed. The guide called
u201CRequirements of ABAP Programs in Unicode Systemsu201D, which can be found via:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b02d3594-ae48-2a10-83a7-89d369b708e5
gives customers a comprehensive description of possible errors. Please also have a look at the docu provided directly in transaction UCCHECK. In addition, SAP notes 1322715 (search for UCCHECK) and 1319517 (point 8.) might be helpful.
Please note that customer programs have to be adapted - simply setting the Unicode flag works only for the objects with a green traffic light in UCCHECK .
Best regards,
Nils Buerckel
SAP AG

Removing the explicitly installed flag for all dependency packages

From what I gather, pacman -Rs won't remove any packages marked as explicitly installed, which causes a couple of problems for me:
Say I need to reinstall all my packages for whatever reason; they'll all be marked as explicitly installed, so from that point on I wouldn't be able to search for orphans.
There other case I can think of would be when I reinstall a dependency of some package for whatever reason, then later delete that top package with -Rs, that would mean the dependency and anything it depends on would remain on my system even if I don't really need it.
Does pacman support, or are there any scripts that will go through the package databse and mark all packages that are depended on by other packages as dependencies rather than explicitely installed? Basically reset the explicit flag for anything that isnt a leaf on the tree.

Hi
There are 2 ways in doing this, either by report filtering or by formula, i would highly suggest using a report filter, just click the funnel icon in your webi report and drag your flag object then select Not Equal to condition then select 0.
if you want to use a formula you can type in "=[Person Object] where([flag] = "0")". NOTE: only use "" if your flag is a dimension.
kindly tell me if I'm missing something.
Regards,
-John Vincent

For all entries Where condition character length partilally has to be used

Hi,
I need to fetch all the data reocrds of one internal table into the other with the condition that in one of the field of first internal table only partial length of the character has to be used as a where condition.
Example:
Select xxxx
          yyyyy
          zzzzz
into it_tab2
for all entries in itab1
where field2 = itab1-field1(4).
where field1 of itab1 has length of 8 and field2 belongs to itab2.
As it throws the error msg :
it will ignore the length restriction mentioned in where condition of the for all entries

Hi.
If you are trying to fetch from any database table based on your modified table use this logic.
Dfine another internal table same as itab1, with field one lenght as 4 char.
ex:
data: begin of it_tab2.
        field1(4),
end of it_tab2.
loop at it_tab1.
it_tab2 = itab1+0(4).
append it_tab2.
clear it_tab2.
endloop.
now you can fetch from database table....using it_tab2.
Select xxxx
yyyyy
zzzzz
into it_tab3
for all entries in itab2
where field2 = itab2-field1(4).
If you only want to move the entries form one internal table to another internal table and truncate the field1 of itab1.
then no need to use any for all entries...
apply this logic
data: begin of it_tab2.
        field1(4),
end of it_tab2.
loop at it_tab1.
it_tab2 = itab1+0(4).
append it_tab2.
clear it_tab2.
endloop.
Regards,
Satish

SQL- Statement: for all entries, where

Hi all, I have a Statement
         SELECT * FROM ltak
           INTO TABLE lt_help for all entries in gt_tree
           WHERE bdatu = gt_tree-node_key.
It doesnt want to compile, because the field bdatu is not of the same type like my field node_key.
How can I process this statement, or how can I convert it ?
Thanks,
Regards,
HProkoph
Edited by: Rob Burbank on Dec 17, 2009 9:26 AM

Hello,
This is what you were suggested before
"Add a extra field in the internal table gt_tree
data: begin of gt_tree occurs 0,
         bdatu1 like ltak-bdatu,
        end of gt_tree.
"before the select statement
loop at gt_tree.
gt_tree-bdatu1 = gt_tree-node_key.
modify gt_tree.
endloop.
SELECT * FROM ltak
           INTO TABLE lt_help for all entries in gt_tree
           WHERE bdatu = gt_tree-bdatu1.
Vikranth

I've received an mail to say that my account has been blocked as I need to go through an ID verification process, I started this but I am asked for all my bank info including account number and sort code, I am worried that this is a scam. How do I find o

I've received an email which tells me to verify my apple ID as my account has been blocked for security purposes, the verification process uses all my banking info and I got worried that I may have received a phishing or malware of some sort.

It is a phishing attempt to get your personal infomation.
Do not reply and delete the email.

Global Defined Table - Existing for single package only or for all package

Hi Folks,
I got a question around global fields in start routines of transformations.
Lets say I have defined in the global section a table that should hold some lookup values retrieved in the start routine (e.g. material attributes for all material number entries in the data package). Later this table is used in the transformation to "fill fields" for the target cube.
Will this table be "initiated" for every package so it will hold only the data the start routine put there.
Or is it "existing" throughout the whole update process and every new package will "add" records there so overtime it will grow from package to package?
Thanks and best regards,
Axel

Use a simple trick to get around.
IF sy-uzeit < 060000.
load_date = sy-datum - 1.
ELSE.
load_date = sy-datum.
ENDIF.
Edited by: Dirk Herzog on May 24, 2011 10:44 AM

How to debug start routine for the custom code?

Hi Experts,
Can anybody tell me how to debug the start routine? Also could you please guide me where to write the custom code in the start routine.
Thanks in advance.
Sharat.

Rajkumar,
Thank you for your help. but the blog link that you send it to me does not mention anything about ABAP debugger screen.
What should I do once I get in to the ABAP debugger? the link only tells how to get to the ABAP debugger that I know.
Also it say that I have to use the infinite loop to debugg the start routine.
Can anybody tell me how to debugg start routine with the scren shots please. I don't know how to use infinite loop in the start routine. Is their any easy process step by step to see my particular record behavior in the start routine?
I will assing you the points. again thank you.

0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error

Hi all,
Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine and the error message is as follows:
+ E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
Please suggest me th approach to resolve this issue.
Regards,
Prabhakar

Hi Chandu,
Please find below is the routine:
PROGRAM trans_routine.
      CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
    DATA:
      p_check_master_data_exist
            TYPE RSODSOCHECKONLY READ-ONLY,
*-    Instance for getting request runtime attributs;
    Available information: Refer to methods of
    interface 'if_rsbk_request_admintab_view'
      p_r_request
            TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
    TYPE-POOLS: rsd, rstr.
Rule specific types
    TYPES:
      BEGIN OF tys_SC_1,
     InfoObject: 0STORNO Reversal Indicator.
        STORNO           TYPE /BI0/OISTORNO,
     InfoObject: 0RT_PROMO promotion.
        RT_PROMO           TYPE /BI0/OIRT_PROMO,
     InfoObject: 0VAL_CLASS Valuation class.
        VAL_CLASS           TYPE /BI0/OIVAL_CLASS,
     InfoObject: 0DOC_DATE Document Date.
        DOC_DATE           TYPE /BI0/OIDOC_DATE,
     InfoObject: 0STOCKTYPE StockType.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0STOCKCAT Stock Categories.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0PSTNG_DATE Posting date in the document.
        PSTNG_DATE           TYPE /BI0/OIPSTNG_DATE,
     InfoObject: 0COMP_CODE Company Code.
        COMP_CODE           TYPE /BI0/OICOMP_CODE,
     InfoObject: 0BWAPPLNM Application component.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0MOVETYPE movement Type (Inventory Management).
        MOVETYPE           TYPE /BI0/OIMOVETYPE,
     InfoObject: 0STOCKRELEV BW: Relevance to Stock.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
        CPPVLC           TYPE /BI0/OICPPVLC,
     InfoObject: 0CPSVLC BW: Sales Value in Local currency.
        CPSVLC           TYPE /BI0/OICPSVLC,
     InfoObject: 0CPSTLC BW: Sales Value in Local currency.
        CPSTLC           TYPE /BI0/OICPSTLC,
     InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0VAL_TYPE Valuation Type.
        VAL_TYPE           TYPE /BI0/OIVAL_TYPE,
     InfoObject: 0PROCESSKEY BW: Transaction Key.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0BATCH Batch number.
        BATCH           TYPE /BI0/OIBATCH,
     InfoObject: 0MATMREA Reason for Goods Movement.
        MATMREA           TYPE /BI0/OIMATMREA,
     InfoObject: 0BUS_AREA Business Area.
        BUS_AREA           TYPE /BI0/OIBUS_AREA,
     InfoObject: 0COSTCENTER Cost Center.
        COSTCENTER           TYPE /BI0/OICOSTCENTER,
     InfoObject: 0SOLD_TO Sold-to Party.
        SOLD_TO           TYPE /BI0/OISOLD_TO,
     InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
        WHSE_NUM           TYPE /BI0/OIWHSE_NUM,
     InfoObject: 0STOR_LOC Storage Location.
        STOR_LOC           TYPE /BI0/OISTOR_LOC,
     InfoObject: 0STRGE_BIN Storage Bin.
        STRGE_BIN           TYPE /BI0/OISTRGE_BIN,
     InfoObject: 0STRGE_TYPE Storage Type.
        STRGE_TYPE           TYPE /BI0/OISTRGE_TYPE,
     InfoObject: 0VENDOR Vendor.
        VENDOR           TYPE /BI0/OIVENDOR,
     InfoObject: 0MATERIAL Material.
        MATERIAL           TYPE /BI0/OIMATERIAL,
     InfoObject: 0DOC_NUM BW: Document Number.
        DOC_NUM           TYPE /BI0/OIDOC_NUM,
     InfoObject: 0BASE_UOM Base Unit of Measure.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
     InfoObject: 0DOC_YEAR BW: Document Year.
        DOC_YEAR           TYPE /BI0/OIDOC_YEAR,
     InfoObject: 0PROFIT_CTR Profit center.
        PROFIT_CTR           TYPE /BI0/OIPROFIT_CTR,
     InfoObject: 0DCINDIC Debit/Credit Indicator.
        DCINDIC           TYPE /BI0/OIDCINDIC,
     InfoObject: 0LOC_CURRCY Local currency.
        LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
     InfoObject: 0PLANT Plant.
        PLANT           TYPE /BI0/OIPLANT,
     InfoObject: 0FISCVARNT Fiscal year variant.
        FISCVARNT           TYPE /BI0/OIFISCVARNT,
     InfoObject: 0CPNOITEMS BW: Number of activities.
        CPNOITEMS           TYPE /BI0/OICPNOITEMS,
     InfoObject: 0CO_AREA Controlling Area.
        CO_AREA           TYPE /BI0/OICO_AREA,
     InfoObject: 0DOC_ITEM BW: Document Line Number.
        DOC_ITEM           TYPE /BI0/OIDOC_ITEM,
     InfoObject: 0VALUE_LC Amount in local currency.
        VALUE_LC           TYPE /BI0/OIVALUE_LC,
     InfoObject: 0QUANT_B Quantity in base units of Measure.
        QUANT_B           TYPE /BI0/OIQUANT_B,
     InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
        MOVE_PLANT           TYPE /BI0/OIMOVE_PLANT,
     InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
        RECORDMODE           TYPE RODMUPDMOD,
     InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
        RT_RMAPIDA           TYPE /BI0/OIRT_RMAPIDA,
     InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
*Record.
        BWCOUNTER           TYPE /BI0/OIBWCOUNTER,
     InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
        INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
     InfoObject: 0GN_R3_SSY Source System for R/3 Entity.
        GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
     InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
        RT_MOVINV           TYPE /BI0/OIRT_MOVINV,
     InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
        RT_MOVADJ           TYPE /BI0/OIRT_MOVADJ,
     InfoObject: 0RSL_STMAT Structured Article.
        RSL_STMAT           TYPE /BI0/OIRSL_STMAT,
     InfoObject: 0RT_MOVRET movement Type is Return.
        RT_MOVRET           TYPE /BI0/OIRT_MOVRET,
     InfoObject: 0RSL_STAUTO Automatically Completed Component.
        RSL_STAUTO           TYPE /BI0/OIRSL_STAUTO,
     InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
        RT_MOVTRAN           TYPE /BI0/OIRT_MOVTRAN,
     InfoObject: 0RT_MATPOST Transfer Posting from Article to Article
        RT_MATPOST           TYPE /BI0/OIRT_MATPOST,
     InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
*ue in Local crcy.
        RT_SASTSV           TYPE /BI0/OIRT_SASTSV,
     InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
*in Local currency.
        RT_SASTST           TYPE /BI0/OIRT_SASTST,
     InfoObject: 0COORDER order number.
        COORDER           TYPE /BI0/OICOORDER,
     InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
        RMA_LNK           TYPE /BI0/OIRMA_LNK,
     InfoObject: 0RMA_RFLG RMA Relevance Flag.
        RMA_RFLG           TYPE /BI0/OIRMA_RFLG,
     InfoObject: 0RTHFEES Stock Transfer Fees.
        RTHFEES           TYPE /BI0/OIRTHFEES,
     Field: RECORD.
        RECORD           TYPE RSARECORD,
      END   OF tys_SC_1.
    TYPES:
tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                        WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line   -
    METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
    METHODS
      inverse_start_routine
        IMPORTING
          i_th_fields_outbound         TYPE rstran_t_field_inv
          i_r_selset_outbound          TYPE REF TO cl_rsmds_set
          i_is_main_selection          TYPE rs_bool
          i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
          i_r_universe_inbound         TYPE REF TO cl_rsmds_universe
        CHANGING
          c_th_fields_inbound          TYPE rstran_t_field_inv
          c_r_selset_inbound           TYPE REF TO cl_rsmds_set
          c_exact                      TYPE rs_bool.
ENDCLASS.                    "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
    TYPES:
      BEGIN OF tys_SC_1_full,
     InfoObject: 0STORNO Stornokennzeichen.
        STORNO           TYPE /BI0/OISTORNO,
     InfoObject: 0RT_PROMO Aktion.
        RT_PROMO           TYPE /BI0/OIRT_PROMO,
     InfoObject: 0VAL_CLASS Bewertungsklasse.
        VAL_CLASS           TYPE /BI0/OIVAL_CLASS,
     InfoObject: 0DOC_DATE Belegdatum.
        DOC_DATE           TYPE /BI0/OIDOC_DATE,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
        PSTNG_DATE           TYPE /BI0/OIPSTNG_DATE,
     InfoObject: 0COMP_CODE Buchungskreis.
        COMP_CODE           TYPE /BI0/OICOMP_CODE,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
        MOVETYPE           TYPE /BI0/OIMOVETYPE,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
        CPPVLC           TYPE /BI0/OICPPVLC,
     InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
        CPSVLC           TYPE /BI0/OICPSVLC,
     InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
        CPSTLC           TYPE /BI0/OICPSTLC,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0VAL_TYPE Bewertungsart.
        VAL_TYPE           TYPE /BI0/OIVAL_TYPE,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0BATCH Chargennummer.
        BATCH           TYPE /BI0/OIBATCH,
     InfoObject: 0MATMREA Grund für die Warenbewegung.
        MATMREA           TYPE /BI0/OIMATMREA,
     InfoObject: 0BUS_AREA Geschäftsbereich.
        BUS_AREA           TYPE /BI0/OIBUS_AREA,
     InfoObject: 0COSTCENTER Kostenstelle.
        COSTCENTER           TYPE /BI0/OICOSTCENTER,
     InfoObject: 0SOLD_TO Auftraggeber.
        SOLD_TO           TYPE /BI0/OISOLD_TO,
     InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
        WHSE_NUM           TYPE /BI0/OIWHSE_NUM,
     InfoObject: 0STOR_LOC Lagerort.
        STOR_LOC           TYPE /BI0/OISTOR_LOC,
     InfoObject: 0STRGE_BIN Lagerplatz.
        STRGE_BIN           TYPE /BI0/OISTRGE_BIN,
     InfoObject: 0STRGE_TYPE Lagertyp.
        STRGE_TYPE           TYPE /BI0/OISTRGE_TYPE,
     InfoObject: 0VENDOR Lieferant.
        VENDOR           TYPE /BI0/OIVENDOR,
     InfoObject: 0MATERIAL Material.
        MATERIAL           TYPE /BI0/OIMATERIAL,
     InfoObject: 0DOC_NUM BW: Belegnummer.
        DOC_NUM           TYPE /BI0/OIDOC_NUM,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
     InfoObject: 0DOC_YEAR BW: Belegjahr.
        DOC_YEAR           TYPE /BI0/OIDOC_YEAR,
     InfoObject: 0PROFIT_CTR Profit Center.
        PROFIT_CTR           TYPE /BI0/OIPROFIT_CTR,
     InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
        DCINDIC           TYPE /BI0/OIDCINDIC,
     InfoObject: 0LOC_CURRCY Hauswährung.
        LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
     InfoObject: 0PLANT Werk.
        PLANT           TYPE /BI0/OIPLANT,
     InfoObject: 0FISCVARNT Geschäftsjahresvariante.
        FISCVARNT           TYPE /BI0/OIFISCVARNT,
     InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
        CPNOITEMS           TYPE /BI0/OICPNOITEMS,
     InfoObject: 0CO_AREA Kostenrechnungskreis.
        CO_AREA           TYPE /BI0/OICO_AREA,
     InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
        DOC_ITEM           TYPE /BI0/OIDOC_ITEM,
     InfoObject: 0VALUE_LC Betrag in Hauswährung.
        VALUE_LC           TYPE /BI0/OIVALUE_LC,
     InfoObject: 0COORDER Auftragsnummer.
        COORDER           TYPE /BI0/OICOORDER,
     InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
        QUANT_B           TYPE /BI0/OIQUANT_B,
     InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
        MOVE_PLANT           TYPE /BI0/OIMOVE_PLANT,
     InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
        RECORDMODE           TYPE RODMUPDMOD,
     InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
        RT_RMAPIDA           TYPE /BI0/OIRT_RMAPIDA,
     InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
*egsatz.
        BWCOUNTER           TYPE /BI0/OIBWCOUNTER,
     InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
        INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
     InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
        GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
     InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
        RT_MOVINV           TYPE /BI0/OIRT_MOVINV,
     InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
        RT_MOVADJ           TYPE /BI0/OIRT_MOVADJ,
     InfoObject: 0RSL_STMAT Strukturierter Artikel.
        RSL_STMAT           TYPE /BI0/OIRSL_STMAT,
     InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
        RT_MOVRET           TYPE /BI0/OIRT_MOVRET,
     InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
        RSL_STAUTO           TYPE /BI0/OIRSL_STAUTO,
     InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
        RT_MOVTRAN           TYPE /BI0/OIRT_MOVTRAN,
     InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
        RT_MATPOST           TYPE /BI0/OIRT_MATPOST,
     InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
*hrung.
        RT_SASTSV           TYPE /BI0/OIRT_SASTSV,
     InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
*r in Hauswährung.
        RT_SASTST           TYPE /BI0/OIRT_SASTST,
     Field: RECORD.
        RECORD           TYPE RSARECORD,      END   OF tys_SC_1_full.
    TYPES:
tyt_SC_1_full        TYPE STANDARD TABLE OF tys_SC_1_full
                        WITH NON-UNIQUE DEFAULT KEY.
    TYPES:
      BEGIN OF tys_TG_1_full,
     InfoObject: 0CHNGID Änderungslauf ID.
        CHNGID           TYPE /BI0/OICHNGID,
     InfoObject: 0RECORDTP Satztyp.
        RECORDTP           TYPE /BI0/OIRECORDTP,
     InfoObject: 0REQUID Request ID.
        REQUID           TYPE /BI0/OIREQUID,
     InfoObject: 0CALDAY Kalendertag.
        CALDAY           TYPE /BI0/OICALDAY,
     InfoObject: 0CALMONTH Kalenderjahr / Monat.
        CALMONTH           TYPE /BI0/OICALMONTH,
     InfoObject: 0CALWEEK Kalenderjahr / Woche.
        CALWEEK           TYPE /BI0/OICALWEEK,
     InfoObject: 0CALYEAR Kalenderjahr.
        CALYEAR           TYPE /BI0/OICALYEAR,
     InfoObject: 0MATERIAL Material.
        MATERIAL           TYPE /BI0/OIMATERIAL,
     InfoObject: 0PLANT Werk.
        PLANT           TYPE /BI0/OIPLANT,
     InfoObject: 0STOR_LOC Lagerort.
        STOR_LOC           TYPE /BI0/OISTOR_LOC,
     InfoObject: 0BATCH Chargennummer.
        BATCH           TYPE /BI0/OIBATCH,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0GN_VENDOR Lieferant.
        GN_VENDOR           TYPE /BI0/OIGN_VENDOR,
     InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
        RECVS_VAL           TYPE /BI0/OIRECVS_VAL,
     InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
        ISSVS_VAL           TYPE /BI0/OIISSVS_VAL,
     InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
        ISSBLOSTCK           TYPE /BI0/OIISSBLOSTCK,
     InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
        ISSCNSSTCK           TYPE /BI0/OIISSCNSSTCK,
     InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
        ISSQMSTCK           TYPE /BI0/OIISSQMSTCK,
     InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
        ISSTRANSST           TYPE /BI0/OIISSTRANSST,
     InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
        RECBLOSTCK           TYPE /BI0/OIRECBLOSTCK,
     InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
        RECCNSSTCK           TYPE /BI0/OIRECCNSSTCK,
     InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
        RECQMSTCK           TYPE /BI0/OIRECQMSTCK,
     InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
        RECTRANSST           TYPE /BI0/OIRECTRANSST,
     InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
        ISSSCRP           TYPE /BI0/OIISSSCRP,
     InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
        ISSVALSCRP           TYPE /BI0/OIISSVALSCRP,
     InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
        RECTOTSTCK           TYPE /BI0/OIRECTOTSTCK,
     InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
        ISSTOTSTCK           TYPE /BI0/OIISSTOTSTCK,
     InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
        ISSVALSTCK           TYPE /BI0/OIISSVALSTCK,
     InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
        RECVALSTCK           TYPE /BI0/OIRECVALSTCK,
     InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
*stand.
        VENCONCON           TYPE /BI0/OIVENCONCON,
     InfoObject: 0LOC_CURRCY Hauswährung.
        LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
     Field: RECORD Nummer des Datensatzes.
        RECORD           TYPE RSARECORD,
      END   OF tys_TG_1_full.
    TYPES:
      BEGIN OF tys_SC_1__RULE_9,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_9.
    TYPES:
      BEGIN OF tys_SC_1__RULE_10,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_10.
    TYPES:
      BEGIN OF tys_SC_1__RULE_11,
     InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
        GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0VENDOR Lieferant.
        VENDOR           TYPE /BI0/OIVENDOR,
      END   OF tys_SC_1__RULE_11.
    TYPES:
      BEGIN OF tys_SC_1__RULE_12,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
        CPPVLC           TYPE /BI0/OICPPVLC,
     InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
        INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0LOC_CURRCY Hauswährung.
        LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
      END   OF tys_SC_1__RULE_12.
    TYPES:
      BEGIN OF tys_SC_1__RULE_13,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
        CPPVLC           TYPE /BI0/OICPPVLC,
     InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
        INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0LOC_CURRCY Hauswährung.
        LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
      END   OF tys_SC_1__RULE_13.
    TYPES:
      BEGIN OF tys_SC_1__RULE_15,
     InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
        GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0VENDOR Lieferant.
        VENDOR           TYPE /BI0/OIVENDOR,
      END   OF tys_SC_1__RULE_15.
    TYPES:
      BEGIN OF tys_SC_1__RULE_19,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_19.
    TYPES:
      BEGIN OF tys_SC_1__RULE_20,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_20.
    TYPES:
      BEGIN OF tys_SC_1__RULE_21,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
        INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_21.
    TYPES:
      BEGIN OF tys_SC_1__RULE_22,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
        INDSPECSTK           TYPE /BI0/OIINDSPECSTK,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_22.
    TYPES:
      BEGIN OF tys_SC_1__RULE_25,
     InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
        GN_R3_SSY           TYPE /BI0/OIGN_R3_SSY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0VENDOR Lieferant.
        VENDOR           TYPE /BI0/OIVENDOR,
      END   OF tys_SC_1__RULE_25.
    TYPES:
      BEGIN OF tys_SC_1__RULE_31,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
        CPPVLC           TYPE /BI0/OICPPVLC,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0LOC_CURRCY Hauswährung.
        LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
      END   OF tys_SC_1__RULE_31.
    TYPES:
      BEGIN OF tys_SC_1__RULE_37,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_37.
    TYPES:
      BEGIN OF tys_SC_1__RULE_38,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_38.
    TYPES:
      BEGIN OF tys_SC_1__RULE_39,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_39.
    TYPES:
      BEGIN OF tys_SC_1__RULE_40,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_40.
    TYPES:
      BEGIN OF tys_SC_1__RULE_41,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKCAT Bestandstypen.
        STOCKCAT           TYPE /BI0/OISTOCKCAT,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_41.
    TYPES:
      BEGIN OF tys_SC_1__RULE_42,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
        PROCESSKEY           TYPE /BI0/OIPROCESSKEY,
     InfoObject: 0STOCKRELEV BW: Best.Relevanz.
        STOCKRELEV           TYPE /BI0/OISTOCKRELEV,
     InfoObject: 0STOCKTYPE Bestandsausprägung.
        STOCKTYPE           TYPE /BI0/OISTOCKTYPE,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_42.
    TYPES:
      BEGIN OF tys_SC_1__RULE_43,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
        CPQUABU           TYPE /BI0/OICPQUABU,
     InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
        MOVETYPE           TYPE /BI0/OIMOVETYPE,
     InfoObject: 0BASE_UOM Basismengeneinheit.
        BASE_UOM           TYPE /BI0/OIBASE_UOM,
      END   OF tys_SC_1__RULE_43.
    TYPES:
      BEGIN OF tys_SC_1__RULE_51,
     InfoObject: 0BWAPPLNM Anwendungskomponente.
        BWAPPLNM           TYPE /BI0/OIBWAPPLNM,
     InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
        CPPVLC           TYPE /BI0/OICPPVLC,
     InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
        MOVETYPE           TYPE /BI0/OIMOVETYPE,
     InfoObject: 0LOC_CURRCY Hauswährung.
        LOC_CURRCY           TYPE /BI0/OILOC_CURRCY,
      END   OF tys_SC_1__RULE_51.
Additional types for start routine interface
TYPES:
    data_package_structure type tys_SC_1_full.
Additional declaration for update rule interface
DATA:
    MONITOR       type standard table of rsmonitor WITH HEADER LINE,
    MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
    RECORD_NO     LIKE SY-TABIX,
    RECORD_ALL    LIKE SY-TABIX,
    SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
INCLUDE rsbctgn_top.
INCLUDE rsbctgn_update_rules.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
CHANGING
    ABORT          LIKE sy-subrc
RAISING
    cx_sy_arithmetic_error
    cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
see OSS note 571669
LOOP AT DATA_PACKAGE.
    IF DATA_PACKAGE-stockcat EQ 'V' OR
       DATA_PACKAGE-stocktype EQ 'V'.
      DELETE DATA_PACKAGE.
    ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM.                    "routine_9998
FORM routine_0012
USING
    COMM_STRUCTURE type tys_SC_1__RULE_9
CHANGING
    RESULT         TYPE tys_TG_1_full-ISSCNSSTCK
    RETURNCODE     LIKE sy-subrc
    ABORT          LIKE sy-subrc
RAISING
    cx_sy_arithmetic_error
    cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100'   "Other Issues
    OR COMM_STRUCTURE-processkey EQ '101'   "Returns / Vendor
    OR COMM_STRUCTURE-processkey EQ '104'   "Material Transfer
    OR COMM_STRUCTURE-processkey EQ '105'   "Stock Adjustment InvD
    OR COMM_STRUCTURE-processkey EQ '106'   "Stock Adjustment Other
    OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
   AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
   AND COMM_STRUCTURE-stockrelev EQ '1'
   AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
    CASE COMM_STRUCTURE-stockcat.
      WHEN 'K'.
        RESULT = COMM_STRUCTURE-cpquabu.
        RETURNCODE = 0.
      WHEN space.
        IF COMM_STRUCTURE-stocktype CA 'KLM'.
          RESULT = COMM_STRUCTURE-cpquabu.
          RETURNCODE = 0.
        ELSE.
          RETURNCODE = 4.
        ENDIF.
      WHEN OTHERS.
        RETURNCODE = 4.
    ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
    RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM.                    "routine_0012
FORM routine_0014
USING
    COMM_STRUCTURE type tys_SC_1__RULE_10
CHANGING
    RESULT         TYPE tys_TG_1_full-RECCNSSTCK
    RETURNCODE     LIKE sy-subrc
    ABORT          LIKE sy-subrc
RAISING
    cx_sy_arithmetic_error
    cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods receipt is considered
IF ( COMM_STRUCTURE-processkey EQ '000'   "Other Receipts
    OR COMM_STRUCTURE-processkey EQ '001'   "Goods Receipt / Vendor
    OR COMM_STRUCTURE-processkey EQ '004'   "Material Transfer
    OR COMM_STRUCTURE-processkey EQ '005'   "Stock Adjustment InvD
    OR COMM_STRUCTURE-processkey EQ '006'   "Stock Adjustment Other
    OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
   AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
   AND COMM_STRUCTURE-stockrelev EQ '1'
   AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
    CASE COMM_STRUCTURE-stockcat.
      WHEN 'K'.
        RESULT = COMM_STRUCTURE-cpquabu.
        RETURNCODE = 0.
      WHEN space.
        IF COMM_STRUCTURE-stocktype CA 'KLM'.
          RESULT = COMM_STRUCTURE-cpquabu.
          RETURNCODE = 0.
        ELSE.
          RETURNCODE = 4.
        ENDIF.
      WHEN OTHERS.
        RETURNCODE = 4.
    ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
    RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM.                    "routine_0014
FORM routine_0041
USING
    COMM_STRUCTURE type tys_SC_1__RULE_11
CHANGING
    RESULT         TYPE tys_TG_1_full-GN_VENDOR
    RETURNCODE     LIKE sy-subrc
    ABORT          LIKE sy-subrc
RAISING
    cx_sy_arithmetic_error
    cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
... determine consolidated key
IF COMM_STRUCTURE-stockcat EQ 'K'.
    PERFORM gn_get_global_key TABLES MONITOR
                          USING    COMM_STRUCTURE-gn_r3_ssy
                                   g_c_bwbeoty_r3vendor
                                   COMM_STRUCTURE-vendor
                                   RECORD_NO
                                   RECORD_ALL
                          CHANGING RESULT
                                   ABORT.
if the returncode is not equal zero, the result will not be updated
Endif.
RETURNCODE = 0.
ENDFORM.                    "routine_0041
FORM routine_0010
USING
    COMM_STRUCTURE type tys_SC_1__RULE_12
CHANGING
    RESULT         TYPE tys_TG_1_full-ISSVS_VAL
    RETURNCODE     LIKE sy-subrc
    ABORT          LIKE sy-subrc
RAISING
    cx_sy_arithmetic_error
    cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100'   "Other Issues
    OR COMM_STRUCTURE-processkey EQ '101'   "Returns / Vendor
    OR COMM_STRUCTURE-processkey EQ '104'   "Material Transfer
    OR COMM_STRUCTURE-processkey EQ '105'   "Stock Adjustment InvD
    OR COMM_STRUCTURE-processkey EQ '106

Start routine in transformation

Hi,
    I need to read master data in a start routine only once.If I write a select statement in the start routine , the select is executed for every data package.I want the select to be executed only once and data can be used by all data packages.I tried keeping the code in the global section of the start routine class and that didn't help either.
   Any ideas.
Thanks in advance

Hi Siva,
Then..Use Static Internal table...
Structured Static Internal Table Definition
- STATICS itab TYPE tabtype [WITH HEADER LINE].
- STATICS itab TYPE tabkind OF linetype
[WITH [UNIQUE|NON-UNIQUE] keydef]
[INITIAL SIZE n] [WITH HEADER LINE].
- STATICS itab LIKE tabkind OF lineobj
[WITH [UNIQUE|NON-UNIQUE] keydef]
[INITIAL SIZE n] [WITH HEADER LINE].
- STATICS itab TYPE linetype OCCURS n [WITH HEADER LINE].
- STATICS itab LIKE lineobj OCCURS n [WITH HEADER LINE].
- STATICS: BEGIN OF itab OCCURS n,
END OF itab [VALID BETWEEN f1 AND f2].
STATICS itab TYPE RANGE OF type.
STATICS itab LIKE RANGE OF f
@@@@@@@@@@@@@22
Logic: make flag variable as static variable in global area.
First data package...
IF flag EQ ' '.
Read Master data table and put in STATIC internal TABLE.
So the next time(next data package)..not read from master data table
flag = 'X'.
ENDif.
LOOP DATA_PACKAGE.
ENDLOOP.
@@@@@@@@@@@@2
Regards,
San!
Message was edited by:
        Sandeep Khatri(San!)

Start routine in DSO Self transformations

Hi SCN,
I need to write start routine to fill one of my target feild.
Here my info object is ZCust and attribute zpur_grp
My DSO have 0customer and zpur_grp.
Am creating self transformations for my dso and need to fill zpur_grp from zcust if dso-zpur_grp is blank.
condition is dso-0customer = info object-customer.
Am new to abap code part and confused about specifying fields and tables(/bic/).
Need suggestions to write sample format code.
Thanks in advance.
Chandra

Hi Chandra,
U need to write look-up code.
Below s sample code. it might be help you.
Declare Internal Table Like follow:
TYPES: BEGIN OF TY_CUST,
                  ZCust TYPE /BIC/ ZCust ,
                  zpur_grp TYPE /BIC/ zpur_grp
               END OF TY_CUST.
select value for internal table.
SELECT /BIC/ ZCust /BIC/zpur_grp
       FROM /BIC/PZCust
       INTO TABLE IT_CUST
       FOR ALL ENTRIES IN SOURCE_PACKAGE
       WHERE /BIC/ZCust = SOURCE_PACKAGE-/BIC/0customer
       AND OBJVERS = 'A'.
Then write Lookup code in start routine.
LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
       clear : WA_CUST_DBDIV.
* Read internal table for customer
       READ TABLE IT_CUST
       WITH KEY ZCust = <SOURCE_FIELDS>-/BIC/0custome
       INTO WA_CUST_DBDIV
       BINARY SEARCH.
*Populate the corresponding Customer and DB Division in RESULT_PACKAGE
       IF SY-SUBRC = 0.
         <SOURCE_FIELDS>-/BIC/0custome = WA_CUST_DBDIV-ZCust.
         <SOURCE_FIELDS>-/BIC/zpur_grp = WA_CUST_DBDIV-zpur_grp.
ENDLOOP.
Hope it 'll help you.
Regards,
Mukesh

?(Start) Routine to fill a flag for all Y_ID_i where X_IDij is max value

Similar Messages

Maybe you are looking for