Starting multiple SOs in the same partition

For that, you have to write an if condition.
Something like that should do it
if (time*thisComp.FrameDuration < 108){
Revols = thisComp.layer("NbTour").transform.opacity
ease(time, (12/24), (108/24), -9, Revols*-360);
}else{
// here your code to do after the frame 108

Similar Messages

Again, cannot start multiple domains at the same time

Because the original question is marked as answered and the problem persists, I need to submit it again:
With the latest plugin, in Glassfish Kepler, when I try to start the second server (same Glassfish, different domain) - it'll simply not start (the console remains empty) and after a while I get the time-out message, that the server could not be started. Even if 2 Eclipses are started, there only one server at a time can be started.
This is a major issue for me, can you please help? Is there a lock file that I can delete or another workaround?

Hi. The weird thing is that after the last update it worked for me, too, for a while - but then it didn't. I think there may be some sort of lock that hasn't been released when a forced shut down happened...?
If I start the servers either outside of eclipse (command line), or using eclipse's external tools (which is pretty much the same, I think), they work just fine. And the status in the servers view gets updated to either started/stopped, correctly.
And also, the case when I create domains/start servers outside of eclipse and then create the server in the servers view, the status update works.
So yes, if there are multiple domains started at the same time outside of eclipse, the plugin shows them, but it cannot start them itself.
Eclipse GlassFish Tools
Part of Oracle Enterprise Pack for Eclipse 12.1.2.1 - version 6.2.0.201307232054
Glassfish
Installed Version:
Oracle GlassFish Server 3.1.2.2 (build 5)

Can I store multiple bootable images in the same partition?

Can I store multiple bootable images in the same partition or do they each need their own partition? I am going to use disk utility to create a copy of my current OSX 10.5 system on a new external drive before upgrading to Snow Leopard. Then I want to create a bootable copy of Snow Leopard. Can I create one partion large enoough to hold both images or will I need to create a separate partition for each. I have done booting off of an external hard drive and it works well. I do not know how the system sees this and thus if I store both images on the same partition, will it give me both as a boot option at startup or will it see only one?

They will need separate partitions to be bootable

Disallow running multiple instances of the same web start application..

on the client? I have an application that is launched on the client by clicking on the link to the JNLP file. The problem is that I don't want the application to launch twice if the user clicks the link twice. Is there a way to keep web start from running multiple instances of the same app?
I don't want to just disable the button after it is clicked because then the user won't be able to get back in if they need to.
Any help out there?
Thanks,
Melanie

The way I do this is to try connect to an obscure port number on the localhost at startup.
if this connection succeeds I assume the app is already running. otherwise the program continues and registers as a server at that port number.
I actually take this a little bit further by registering a web server at this port (I use the Brazil server), That way if the program finds an instance of itself running it can send a message to the web server and ask the program to do something (like start another window if,for instance you wanted to allow this but only within the same VM).

Contribute multiple instances of the same connection appear on login/start screen

I am administering a series of sub-websites under one primary umbrella.
- The Primary Umbrella site does not run under the Contribute Publishing Server
- The secondary (child) sites are managed by the Contribute Publishing Server
- We recently added a user to several of these subsites
- After we added the user, we've had a problem with other user profiles.
- Multiple instances of the same connection will appear upon login on the start screen ( about:startscreen ). However the user seems to only be able to credential to one of them, not both.
I have gone into the user profile directory within Windows directory structure and removed both site dirs. However when restarting and reconnecting, both appear again.
Anyone else have this issue and what is the remedy and fix?

I tried to add a screenshot, however it would not let me upload.
I get: An error occurred while trying to submit your post. Please try again.

What is the best way to have multiple devices on the same account so we can still share the same library. Right now I have 7 and I believe it's causing them to malfunction.

I have multiple devices on the same itunes library and they all starting to have the same issues. Not recognizing numbers previously stored, not sending/receiving tests. Do I need to get everyone separate itunes accounts?

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

How do I have multiple accounts on the same computer

how do I have multiple accounts on the same computer? The idea of ", hold down the option (on a Mac)/ shift (on a PC) key each time you start iTunes" does not seem to work for me. Thanks.

Create multiple Windows User Profile with each managing his own iTunes account and library.
To create a user account on Windows 7:
To open User Accounts, click the Start button , click Control Panel, under 'User Accounts and Family Safety', select Add or Remove User Accounts.
Click Create a new account.
Type the name you want to give the user account, click an account type(make sure to give Administrator), and then click Create Account.

Should multiple developers share the same MDS repository?

We are starting a new customizable application using ADF, WebCenter and SOA Suite 11g wondering what is the best practice for MDS repositories. By default JDeveloper seems to use a file-based repository, however we need to take advantage of a database repository. The question is: Can & should multiple developers share the same MDS repository, or do we need to use the RCU tool to create a new repository for each developer? If developers share the same repository I"m wondering what happens to seed customizations if two developers both edit the same thing (like a SOA composite).
Thanks for your input

Thanks again ... I'm not so worried about packing the customizations in the EAR or MAR, I just hate developers having to manually change adf-config.xml from source control all the time.
I've tried using {oracle.home} and it does not work. This seems to be a bug in JDeveloper, because I print the env variable and verify that it is correct but the deployment still fails.
In adf-config.xml I have:
<property value="*${oracle.home}\integration*"
name="metadata-path"/>
When WLS starts up, I print the env variable and see it is set to: D:\home\fmw\JDEVEL~1
But then when I try to deploy my application I get this:
INFO: MDSException encountered in parseADFConfigurationMDS-00503: The metadata path "D:\home\fmw\jdeveloper\system11.1.1.1.33.54.07\o.j2ee\drs\PriceManagementPOC\adf\META-INF\D:\home\fmw\JDEVEL~1\integration" does not contain any valid directories.
For some reason it seems to be appending the directory of adf-config to the oracle home directory. It's as if the code assumes its a relative path. Looks like a bug to me.
Billy
Edited by: Billy Turchin on Aug 28, 2009 9:33 AM

WDS 2012 R2 - Cannot PXE multiple clients at the same time

Hello All,
This is my first post on here so I apologize if this is the wrong place. I work for a school district and we are implementing WDS 2012 R2. We've been extremely satisfied with the speeds and ease of use through unattend files. However, for
the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
So here's the problem:
I have a stand alone WDS server which is not a domain controller and is not our DHCP server. I have IP helpers and broadcast forwarders setup on the network. As well as option 66 and 67 in DHCP. So far so good right!
Well that's partially right. When we boot one client at a time to the WDS server. Everything works as intended. We can TFTP the necessary files from the WDS server. Everything boots up and we're off and running.
However, if we boot up two or more clients at the same time. The WDS server never responds to the traffic. The clients get their DHCP information. They start the referral and download from the WDS server, but get no response. I'm
really hoping that someone on here would have some insight of something I can try. I've about exhausted my list of peers and contacts. They're all stumped as well and were smart enough to stay with 2008 WDS.
I would prefer to stick with 2012 R2 since it's setup and working for the most part. With only this one hiccup.
Thanks in advance for any guidance!

Hello Daniel,
I appreciate the reply and apologize for taking so long to get back to this. Things have been a little hectic over here.
I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
Multicast is enabled on the server, and it works for the clients. However, as stated in the original post. I cannot boot multiple machines at the same time. I can start them from the image selection screen around the same time though. So,
that appears to be working fine.

Lightroom CC issues with multiple export at the same time

Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are started

Re: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages.

Problem:Multiple instances of the same applet on a webpage...

I have an applet which connects to a server to read an XML-file.
I use Doucument to parse the XML-file like this:
String xmlurl="http://www.somesite.com/somexmlpage.php";
Document d =DocumentBuilderFactory.newInstance().newDocumentBuilder().parse(xmlurl);
(...read the XML-file...)
This works fine.
However, I need multiple instances of the same applet running at the same time on the same webpage.
Now, with multiple applets running at the same time the parsing no loger works. If one applet is doing some parsing and a taskswitch takes place to let another applet run, the applet which is interrupted is not able to continue the parsing as it looses its "incoming data" when another applet reads from the server.
How can different applets affect each other like this?
And how can I fix the problem?
Thanks in advance for any help!!

However, I need multiple instances of the same applet running at the same time on the same webpage.
Why? But okay.Because the the different applets show information about different items.
Now, with multiple applets running at the same time the parsing no loger works. If one applet is doing some parsing and a
taskswitch takes place to let another applet run, the applet which is interrupted is not able to continue the
parsing as it looses its "incoming data" when another applet reads from the server.
How did you determine that's what's happening?By printing out debuginformation.
Each applet prints out a message (System.out.println) when it creates an instance of Document (ie. connects to the server) and the applet also prints out XML-information as the XML-file is processed.
But, actually, I was a bit quick in my first post; The applet doesen't neccesarily loose its "incoming data", but the parser looses the data it is parsing. I can download the data from the server first, and then start parsing it. If a taskswitch happens while one applet is parsing, it looses its data, even if the data is allready downloaded.
I see this since I see another applet making a printout, and when first applet starts again, the parser has lost track of its data.
It works fine if only one applet is running. And everything is fine until the next applets starts; I can see this from the printout.
Again, the appet prints out data as it parses the document. I see the next applet starting to work, and when the first one continues parsing again the printout shows that data is no longer there. It happens everytime the runtime switches to another applet, and it never happens if just one applet is running.
Googeling a little tells me that DocumentBuilder.parse() isn't thread-safe, but this shouldn't have anything to do with it, should it?
Each applet is a separate process, and not different threads in the same process, aren't they? (Not sure how the runtime treats multiple applets...)And secondly, the applets create their own instance of Document anyways.

Use of Multiple instances of the same browser...

Hi folks,
I have a question...
I have inherited a large APEX application, it uses Oracle SSO to log in.
We are migrating the application to a new set of servers and are running regression tests.
The testers are logging in using IE6 and opening multiple instances of the application at the same time on both the oldTest and newTest servers.
So at any one time, there can be:an application Admin user (username ADMINTEST123) logged into the application on oldTest
an application Admin user (username ADMINTEST123) logged into the application on newTest
an application standard user (username TEST123) logged into the application on oldTest
an application standard user (username TEST123) logged into the application on newTestIs this supported?
Could someone tell me or point me toward the documentation or thread that lists what is supported / unsupported for browser use with APEX and SSO?
Thanks in advance,
Gus..

Hi lev,
thanks but sorry, that doesn't really help me, I'm talking about users and their logins, not developers using different browsers while developing apex.
Also, our users are locked down to IE6 for the foreseeable future.
Hi Scott,
I found the following quote from this web site http://aranea.zuavra.net/index.php/80/ about Cookie separation in modern browsers
*4.3. Internet Explorer 6.0*
Finally, Explorer is the one that introduces an interesting quirk. It too has separate settings per machine users, although it cannot make use of multiple profiles for the same user.
The interesting thing is the way it handles session cookies. Normally, long term a.k.a. non-session cookies are stored on disk in the user preferences. However, Explorer has a setting called “browse in new process” which, if enabled, forces a new session with each new window. That’s right, this means that every time you open a new Explorer window it opens a separate process, even though the windows belong to the same user! And, in turn, these processes will NOT share their session cookies.
Note: By “new window” I mean windows started from shortcuts, from Start Menu entries or by calling iexplore.exe directly somehow (from a file manager, for example). Windows started via Control+N or File/New window run in the same process and share session cookies. Also, please note that it’s a lot more likely for users to click their taskbar shortcut when they need a new window than it is to use the File menu or the Control+N shortcut.+
Furthermore, ever since version 5.0 the setting cannot be changed manually, by the user. It is automatically determined by the browser based on how much RAM the machine has. Anything with at least 32 MB of RAM gets the “one window, one process” behaviour, which nowadays means almost all machines.
I have tested the *"new window"* opening methods and found that for IE6 there is NO NEW PROCESS started when the user opens a new window in the following 3 ways:
from an open window, File>New>Window
from an open window, CTRL+N
from an open window, right click>Open in New Window
So from this can I conclude that from what you say and the results above we may get issues if users login and then open new windows in those ways?
Thanks,
Gus..

Multiple copies of the same podcast?

Why do I get multiple copies of the same podcast with different episodes in iTunes? Is there a way of merging them into a single
podcast? On my iMac, I may delete some episodes and add others. When syncing with my iPhone, a new podcast is created rather
than updating the existing podcast. At times, I've ended up with four different podcasts of the same program and finding a specific episode
means searching thru all four.

I have been experiencing the same problem, and unfortunately sanfranciscotx's suggestion doesn't address or resolve the issue.
iTunes is behaving inconsistently. There are podcasts for which I have selected the "Download All" option and it only downloads new podcasts that have been released since the last time it was checked, regardless of how many podcasts were released in that time, without downloading old podcasts.
In another case, the "Download All" option is selected, and it works as I would expect (the above scenario) for some time, but then one week it will start downloading a bunch of older podcasts as the original poster has mentioned.
I am running iTunes 10.5.3, so I'm lead to believe the issue lies with the server where the podcasts are stored or the podcast feed and not with iTunes.

Multiple HighlightPainters for the same JEditorPane

Hey Everyone,
I'm having a problem having highligts of multiple colors for the same text component.
Basically I have a set of results in a separate panel for a search on the text in a JEditorPane. I want the text corresponding to all the search results to be highlighted one color as soon as the search is done, and when one specific search result is clicked on, have the highlight for that result's text change to a different color.
My current implementation is trying to do this by setting highlights for all the search results, and then when a result is clicked on, setting another highlight with another highlight painter of a different color. Unfortunately, this causes only the second higlight color to be displayed, even though when I look at the editorpane's highlights i can see all of them are being stored.
Is there something I'm misunderstanding about Highlights?
Thanks for any help,
Phil.

This example shows some ways of playing with attributes and highlights:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.text.*;
public class TextPaneAttributes extends JFrame
     JTextPane textPane;
     JScrollPane scrollPane;
     Highlighter.HighlightPainter cyanPainter;
     Highlighter.HighlightPainter redPainter;
     public TextPaneAttributes()
          textPane = new JTextPane();
          textPane.setMargin( new Insets(20, 20, 20, 20) );
          StyledDocument doc = textPane.getStyledDocument();
          DefaultHighlighter highlighter = (DefaultHighlighter)textPane.getHighlighter();
          cyanPainter = new DefaultHighlighter.DefaultHighlightPainter( Color.cyan );
          redPainter = new DefaultHighlighter.DefaultHighlightPainter( Color.red );
          // Set alignment to be centered for all paragraphs
          MutableAttributeSet standard = new SimpleAttributeSet();
          StyleConstants.setAlignment(standard, StyleConstants.ALIGN_CENTER);
          doc.setParagraphAttributes(0, 0, standard, true);
          // Define a keyword attribute
          MutableAttributeSet keyWord = new SimpleAttributeSet();
          StyleConstants.setForeground(keyWord, Color.red);
          StyleConstants.setFontSize(keyWord, 24);
          StyleConstants.setStrikeThrough(keyWord, true);
          // Define superscript attribute
          MutableAttributeSet superscript = new SimpleAttributeSet();
          StyleConstants.setSuperscript(superscript, true);
          // Add initial text
          textPane.setText( "one\ntwo\nthree \nfour\nfive\nsix\nseven\neight\n" );
          // Change attributes on some keywords
          doc.setCharacterAttributes(0, 3, keyWord, false);
          doc.setCharacterAttributes(20, 4, keyWord, false);
          // Highlight some text
          try
               textPane.getHighlighter().addHighlight( 4, 7, cyanPainter );
               textPane.getHighlighter().addHighlight( 25, 28, cyanPainter );
               textPane.getHighlighter().addHighlight( 35, 40, cyanPainter );
               textPane.getHighlighter().addHighlight( 15, 20, redPainter );
          catch(BadLocationException ble) {}
          // Add some text
          try
               doc.insertString(0, "Start of text\n", null );
               doc.insertString(doc.getLength(), "End of text\n", keyWord );
               doc.insertString(doc.getLength(), "2", null );
               doc.insertString(doc.getLength(), "1", superscript );
          catch(Exception e) {}
          // Add text pane to frame
          scrollPane = new JScrollPane( textPane );
          scrollPane.setPreferredSize( new Dimension( 200, 200 ) );
//          scrollPane.setComponentOrientation(ComponentOrientation.RIGHT_TO_LEFT);
          getContentPane().add( scrollPane );
          // Create a Button panel
          JPanel buttons = new JPanel();
          getContentPane().add(buttons, BorderLayout.SOUTH);
          // Add a Bold button
          JButton bold = new JButton( new StyledEditorKit.BoldAction() );
          buttons.add( bold );
          // Add Right Alignment button
          JButton right = new JButton( new StyledEditorKit.AlignmentAction("Align Right", StyleConstants.ALIGN_RIGHT) );
          buttons.add( right );
          // Add Remove Highlight button
          JButton remove = new JButton("Remove Highlight");
          buttons.add( remove );
          remove.addActionListener( new ActionListener()
               public void actionPerformed(ActionEvent e)
                    int offset = textPane.getSelectionStart();
                    Highlighter.Highlight[] highlights = textPane.getHighlighter().getHighlights();
                    for (int i = 0; i < highlights.length; i++)
                         Highlighter.Highlight h = highlights;
                         DefaultHighlighter.DefaultHighlightPainter thePainter =
                              (DefaultHighlighter.DefaultHighlightPainter)h.getPainter();
                         if (offset >= h.getStartOffset()
                         && offset <= h.getEndOffset())
                              textPane.getHighlighter().removeHighlight(h);
     public static void main(String[] args)
          TextPaneAttributes frame = new TextPaneAttributes();
          frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
          frame.pack();
          frame.setVisible(true);

How does iCal, or Calendar, order the display of multiple events for the same time?

I can't for the life of me figure out how iCal orders the display of multiple items at the same time. Does anyone have a clue? It's not alphabetical. It's not according the the order of the calendars in the left pane. Is it just random? Any help would be greatly appreciated.

In the focus lost eventhandling start a thread which does
the actual handling.
the new thread waits for a little time (0.1 seconds)
the click event of the button checks for a thread like the one above and tells it not to execute
This way you execute the for the lost focus event only if
the ok button isn't clicked in the same process ... not
realy good, because it kind of relies on the ordering of threads ... but maybe it still works for you?

Starting multiple SOs in the same partition

Similar Messages

Maybe you are looking for