Startup - Black Screen

Just wondering if anyone else is having a problem when they start their iMac? Recently i have noticed that after i push the power button i get the start-up noise as normal but nothing actually happens on the display - then after about twenty seconds the grey apple screen appears witht the revolving cog and the rest of startup is as normal.
I cant quite say when it first happened as i rarely shutdown my comp but i first noticed it after installing the new itunes and quicktime (after system restart). I have repaired permission and have cocktail so have executed daily, weekly and monthly maintenance etc.
Any help would be greatly appreciated! I may just be over-worrying but i just thought i would check.
Garry
imac g5 Mac OS X (10.4.7)

Garry - I had exactly this problem recently and nailed it down to a problem with one of my USB peripherals plugged into my hub.
Here's the thread:
http://discussions.apple.com/thread.jspa?threadID=641973&tstart=50
Have also since discovered that rather than having to start up in safe mode to see what's going on, if you open up Console and then look at the system log you may see an entry something like:
localhost kernel: USBF: 71.947 AppleUSBEHCI[0x1c93800]::MakeDevice error setting address. err=0xe000404b device=0x2389d00 - releasing device
that repeats for the duration of your Black Screen during start up, indicating that the problem lies with a USB device or its driver.
Anyway - cure for me was simply unplugging the device and reinstalling the drivers. First thing just unplug everything except for keyboard and mouse and see if that sppeds things up, then go looking for the problem device.
Neil

Similar Messages

HT4818 StartUp black screen

Hello, i have a macbook pro mod: 2009, the last before unibody. I have upgraded it to Lion OSX and installed bootcamp for windows. When I choosed from mac operating system to start up with the mac driver, the screen turned black and since then its black. I tried to use shortcuts as: command+alt+P+R, command+V or command+S, nothing happens. Also took off the battery and power cord, and pressed the power button for a while, nothing, still black screen. I can hear the disk starting but the screen remains black. Also the start up sound which normally it would do, doesn't sound anymore. WHAT should I do?

Try an SMC reset. Follow the procedure "for a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

Issue related to startup black screen stuck

I have upgraded my laptop OS to windows 10 (64 bit) .. The problem is when i use to start my laptop after HP logo screen stucks to black color and dosent show any messaage or error.. Wat should i do to recover my laptop...?

Actually I want to flash the image which I have in my system and when I am trying to do it,it is not showing it.simply creates the frame but not displaying the image.I am attaching the code--
import java.awt.*;
import javax.swing.*;
public class SplashScreen extends JWindow {
private int duration;
public SplashScreen(int d) {
    duration = d;
// A simple little method to show a title screen in the center
// of the screen for the amount of time given in the constructor
public void showSplash() {
    Dimension size = new Dimension(0,0);
    // Set the window's bounds, centering the window
    int width = 404;
    int height =406;
    Dimension screen = Toolkit.getDefaultToolkit().getScreenSize();
    int x = (screen.width-width)/2;
    int y = (screen.height-height)/2;
    System.out.println("x=="+x);
    System.out.println("y=="+y);
    setBounds(x,y,width,height);
    // Build the splash screen
    JLabel label = new JLabel(new ImageIcon("Logo.gif"));
     // Display it
    setVisible(true);
    // Wait a little while, maybe while loading resources
    try { Thread.sleep(duration); } catch (Exception e) {}
    setVisible(false);
public void showSplashAndExit() {
    showSplash();
    System.exit(0);
public static void main(String[] args) {
    // Throw a nice little title page up on the screen first
    SplashScreen splash = new SplashScreen(5000);
    // Normally, we'd call splash.showSplash() and get on with the program.
    // But, since this is only a test...
    splash.showSplashAndExit();
}Please take a look on it and please provide your valuable suggestions on it so that I can flash the image.

T60 wont go past Windows XP startup black screen

Hi guys
I am computer noob so take it easy on the flaming. I got a 2 yr old T 60 laptop with 1gb of mem, 80 gb hard drive and XP Home Edition. I had finger print protection and everything to make it secure and my cousin wanted to use my compter when I am not around and I did not know how to disable figer proection so I restored the computer to factory state. It was working fine until 30 min ago when I shut computer off by just pressing the off button for 5 seconds.
Now it just stops at WINDOWS XP screen and wont let me even access the THINK VANTAGE page to restore to factory state. It's not letting me access safe mode either. I am an idiot and did not make a bootable disk since computer companies are being cheap these days and not giving one like they used to.
Please help me fix this problem. Thanks in Advance.

help please

Desktop wont startup black screen

i have a hp desktop computer. It is vista ultimate. Quad core processor. 64 bit. The computer won't startup. I checked my monitors and they all work correctly. What do I do? I understand there is a windows vista installed on the hard drive. I have reinstalled from the desktop before. However I can't this time due my computer not working correctly. I don't want to do recovery disk because I have tried that before on another computer brand and it did not install, it kept freezing.

Laeott, welcome to the forum.
When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2)

My Imac 24" goes black screen after start up. Booting from original CD or CMD R don't work, both go black screen

So, yesterday while playing a game of league of legends my Mac stopped running. After I resetted it, I got black screen after it the chime + loading bal.
So far I've tried:
CMD+R => black screen
Holding shift => black screen
Holding Alt => chosing the HR, the repair disk, or the original CD to reintsall => black screen
Holding S => got to the terminal, did the check up, it said it was ok, restarted => black screen
Took off the power cable, waiting at least 15 seconds, and everything back on => black screen
Holding Alt Cmd + p + R => black screen after restart
Removed 1 of the memories, then testen, same with the other one => black screen
I'm pretty much out of ideas at this point. Anything I've overlooked?

Any white text?
Startup - Black Screen/White Text
Startup – Red Screen
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)
Restart the computer holding down the command - option/alt - P - R keys before the grey screen appears. Continue to hold until you hear the startup chime for the second time.
Reset NVRAM/PRAM
Try a SMC reset. The article covers when this is required, but doing this will not affect anything.
Reset SMC

OS 10.4.5 failure to startup-login window/ black screen/ blue screen-frozen

Hi there,
To anybody that can help me, I thank you very much indeed in advance.
G4 Powerbook, 1.5gHz, 2gb Ram (1gb kingston ram added since purchase date), OS 10.4.5, security update 2006-002 (v1.1 (?) recently installed).
My current problem is that i cannot log into OS X. It boots as far as the login window, which is unresponsive, and then it then flicks to a black screen with 2 or 3 lines of white text and then flicks to a totally 'mac-blue' screen with the black arrow pointer still active.
A history of my problem;
1) Yes, unfortunately I tried to get front row to work on my machine (the hack with the front row enabler etc), and subsequently removed all traces of it after it screwed up a few things (menu bar missing, failure to restart). This tidy-up involved doing something with system library, bezel services...etc.
2) I recently installed the first version of security update 2006-002. i am not saying this is the cause, but sometime after I did this, things started going wrong again. another thing i did recently which i hadnt in the past was to have itunes appear at startup and a few days later i emptied my hard drive of all my music and had this linked to a lacie 250gb via firewire 800. The problem at this was that login/startup was incredibly slow and sometimes the finder would keep relaunching itself on its own once the operating system was up and running. Also, when i tried safe boot, the login window would appear and then it would flick to a black screen. it would let me type in a username, but it would not let me input anything for the password.(I did use disk utility to repair permissions when i did manage to logon).
This whole problem seemed to go away for a day or two, but the login was still slower than usual the past few days.
I then turned on my powerbook this morning and login was extremely long and never completed fully- lots of pinwheel spins, menu bar not loading, itunes not appearing.
After a few forced shutdowns I left the computer for maybe 5-10 mins and it seemed to sort itself out after a few finder relaunches etc, and so i tried a few things;
3) I tried installing the newer version of the security update 2006-002 version 1.1 i think? At the same time i took itunes off the startup launches and also switched off auto login for my account (a silly idea it seems).
Since restarting from the security update, the operating system gets to the login window, which is unresponsive, and then it then flicks to a black screen with 2 or 3 lines of white text and then flicks to a totally 'mac-blue' screen with the black arrow pointer still active.(this is with the power adaptor connected only, no other cables etc)
I have tried Resetting PRAM, and using fsck, although I am slightly unsure as to whether or not this is useful to me anyway. I cannot reinstall the operating system until next week as my mum has my copy of tiger at home a few hundred miles away!
Any help at all would be so greatly appreciated, especially on the eve of my two year anniversary with my powerbook!
Kind regards,
Henry Harker

Hi Henry
I've just encountered this problem with one of our computers at work. Hopefully this will help.
It's a Login Window Prefs problem. It's probably corrupted so you need to remove the prefs file.
1. Startup in safe mode (hold down shift). You should get a login window for the master admin account.
2. Delete the file: userName>Library>Preferences>com.apple.loginwindow.plist
3. Restart.
Let me know how you go.
Cheers
MattD
PowerMac G5, dual 2.5 Mac OS X (10.4.5)

Black Screen on Windows 7 startup

Windows 7 desktop can not load after welcome screen appears just a black screen come and stuck a white mouse pointer works but nothing else.
safe mode works and last known good configuration works
whenever i start in above mentioned mode it works and then i had repaired win. 7 startup and chkdsk perform on c drive. then restart the system and it start properly as it worked. But after a day i start same problem came again.
pls. suggest any permanent solution.

Hi,
at last known good configuration.
after you have access to the OS level. possible to click start > run > type eventvwr
check on the systems and application logs for errors.
have you try systems restore ? if not maybe you might want to check if you have any systems restore point ?
systems restore might be able to help u to get away with this problem.
But if u dont have any restore point. Then i will suggest you to back up all your data and do a clean setup, by reinstalling windows 7.
Guowen Su
Cisco Certified Network Associate
Cisco Certified Internetwork professional - MPLS
Certified Information Systems Security Professional
Microsoft Partner Network 2011
Microsoft Certified Professional
Microsoft Certified Systems Administrator:Security
Microsoft Certified Systems Engineer: Security
Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified Technology Specialist: Windows 7, Configuring
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Certified Ethical Hacker
Computer Hacking Forensics Investigator
Certified Sonicwall Security Administrator
Microsoft Geeks

Black screen with white flashing line on startup

~computer info~
Mac OS X Version 10.6.7
2.66 GHz Intel Core 2 Duo
4GB 1067 MHz DDR3
24 in. Montior
Startup disk: Macintosh HD
~Partition info~
FAT32 Windows XP
~issue~
Hello; I've recently encountered a problem with bootcamp that I can't find a solution to... Every time I start up the computer in boot camp, all I get is that black screen with the white flashing line. It comes up, goes to a plain black screen, then quickly comes up again. It never stops, either. I've let it run, and it won't finish.
I've had the partition for MONTHS now, and nothing like this has happened. I've had it since I upgraded to Snow Leopard awhile back, and needed to re-partition the drive. I literally had been using it the day before it happened, and the only thing that happened was that I got that "Windows Security 2011" malware, but I got rid of it fully (As I've gotten it 3 times this month). The other two times I got it, it didn't do anything. I fixed it, and went on with life. But is it possible that it broke something in the partitions inner files this time?
I ran disk utility, and it said the partition was broken. After verifying it and confirming this, I did "Repair Drive", as it allowed me to. It finished with no errors and said it completed, so I tried to go back into the partition, but it gave me the same results.
To be honest, most of my stuff is on my External Harddrive, so re-doing the partition is only going to be time used to me. But I still DO have things on there, and it'd be a pain to transfer them back and forth between the Mac and Windows partitions... I'd really like to know if there's anyway to fix this, or if it's just going to fall back to me re-partitioning the drive...
Thanks for the help in advance.

That blinking line is a "cursor." It's only supposed to show for a second or two as your iMac switches to and then starts Windows. But as you indicate here, it's not getting past the cursor..
Disk Utility can repair FAT volumes, but it cannot correct issues caused by corrupted items which, if the volume was repaired, there may be some.
Since we are dealing with a Windows boot partition, it's entirely possible that the repairs inadvertently corrupted the data Windows needs to start and run. It's also posible that Mac OS, in fixing the Boot Camp volume, overwrote the existing boot record in the Windows partition with a generic, though non-bootable version.
Windows' own CHKDSK should have been used to make the repairs rather than the OS X Disk Utility, which would have avoided this worst-case scenario in data recovery. CHKDSK has a special version of itself on the Windows disc, which may be accesed by using the Windiws Recovery Consile upon pressing R during the "Welcome to Setup" screen.
Though it appears ftom my position here that you will need to reinstall XP, it may yet be possible to recover data that hasn't been copied to the external HDD. For this task, I'd like to recommend that you start up in Mac OS for the time being, and pull any new or changed items from the Boot Camp volume except for installed software; the latter are nearly impossible to transport with reasonable accuracy, and should instead be reinstalled.
Once you have what you need, format your Boot Camp volume and reinstall Windows, this time selecting NTFS as your filesystem. NTFS is the preferred option for Windows in general, thiaks to its innate file access controls as well as the ability to compress or encrypt data "on the fly." NTFS can be read by Mac OS X, but not written from it, thus NTFS volumes cannot be altered except by Windows itself.. But it is also a requirement if you plan to upgrade your unit using Windows 7 in future.
Nate

BLACK SCREEN startup with 3 beeps, FREEZES when unplugged, Splash screen freeze, HEAT-UP TO BOOT

BLACK SCREEN startup with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-powe
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears, and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling, so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B. I ended up changing a setting in BIOS from AHCI to Compatibility Mode, and I passed everything without the BSOD again. I have always had it on AHCI.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
BIOS:
Also, the time was set to 1988 or something in the BIOS.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the driver wasnt made for the system, or that it wasnt compatible or something, which was wrong. I made it work somehow, but it was still sluggish after install. I rolled it back to an earlier driver, and now it works fine oddly. No sluggish performance / slight freeze window thing going on. No problem at all.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1

T61-Elwood wrote:
Laptops of all Brands using Nvidia GPUsmade from 2007-2008 are faulty.
You wont get good Nvidia ones on Ebay/forumes anywhere.
I'd beg to differ on both accounts.
*61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

IMac 27 Late 2009 with Random black screen at startup of Windows 7!

Hi, I'll try to explain the my random black screen issue as best I can.
I have a boot camp partition with Windows 7 x64 Ultimate installed.
I used the USB method to install, all goes well and Windows 7 gets installed, I update drivers, install boot camp etc. all is good, right!
My problem is that everything seems to be in working order, but the built in LED screen will only get lit/active in 1 out of 5 times at startup of Windows, eg. the built in screen stays black/off (black screen issue), like the install issue on iMac 27 I7 w/ATI 4850.
NOTE! When booting OS X the built in LED screen gets lit/active on every startup.
So what I did was connect a second LCD monitor via Display port to DVI, this monitor/screen has no issues, it gets lit/active on every startup of Windows, even if the built in screen/monitor stays black/off (black screen issue).
NOTE! I have tested both the latest drivers from Apple (10.4 19/MAR/2010, found on the USB install method) and AMD ATI Catalyst Driver (10.8 25/AUG/2010). The issue remains on both Apple released drivers and AMD ATI released drives.
1. So to me it seems like there are some detection/communication issues between the built in monitor and the video card on Windows 7, as there is no issue detecting and activating a monitor connected to the display port.
Are we missing a monitor driver in Windows that OS X has, or is this a hardware issue that Apple knows about and compensates for in OS X with on load firmware, driver or a kernel fix?
2. Does anyone else have this issue on their 27" iMac Late 2009 I7, ATI HD 4850 machine?
If yes, did you manage to solve it?
Thanks for any help on this issue.
Cheers,
Kevin

Hi, I've seem to have found out the source of the problem.
The issue is related to heat, and an iMac 27" gets hot pretty fast.
If I boot the iMac straight after first start into Windows 7 I seem to get a lit built-in display at all times. I can also boot OS X first and then into Windows 7 and the built-in screen get lit every time as long as the iMac isn't hot.
Strange thing is that the monitor connected to the display port gets lit every time. So I can only assume that the heat only interfere with output to the built-in LED screen.
So this iMac is going to an Apple premium reseller for service, and I'll tell you guys how it went.

Help! Laptop won't start up- startup repair goes to black screen!

Hi! Just wondering if anyone can help me with my toshiba laptop C650-152! I was online yesterday when my laptop froze and in the end i had to turn it off by cutting the power source! Today I have tried to turn it on and It keeps going to a black screen with white writing which asks if I want to Start it normally or do startup repair! If I press start normally it gets me to the windows start up screen (with the coloured logo) but then gets stuck there. If i press start up repair it goes to a black screen with a White mouse cursor and gets stuck there too! I can use a laptop just fine but am pretty clueless when it comes to technical matters so if anyone could help explain what I should do (in laymens terms) it would be much appreciated!! Thanks in advance for your help! Beth

To burn the disc from an ISO file, Beth, you may need a third-party utility depending on the version of Windows. I use the free BurnCDCC burning program from here.
TeraByte Unlimited Freeware
To use the disc do I just turn my laptop on..?
Something like this. Turn the computer on, load the disc, turn the computer off, start it again and then press F12 to get the boot-priority men, select the optical drive, follow the instructions (like choose a language and a Windows installation), and you're on your way to the Windows Recovery Environment.
Then will a menu appear so I can choose to do a system restore or do I have to search for it? Finally will doing a 'system restore' delete any of my saved data such as photos/music/uni work?
All that was answered at the link I already gave you.
What are the system recovery options in Windows 7?
Click Show All. Under System Restore, click the links What is System Restore and System Restore: frequently asked questions. No data files are disturbed by System Restore.
-Jerry

Please Help: iMac black screens after startup logo + spinning wheel no cursor).

Hi, guys.
I'm in a fair bit of a desperate situation; my iMac's screen seems to shut down every time after the white startup screen. The Apple logo appears, & the progress wheel begins spinning, then after a while - when it would usually then go to the gray login screen - it would, instead, go black. I can tell that the machine is still on (I can still hear it clicking as it does during processing) but I'm unable to determine anything else. Nothing is visible on the screen - not even the cursor - it's as if the display had turned off completely. I'm not sure if the login screen sits beneath that black screen (I have tried to log on by typing my login details in blindly, but even if it does log in, it's hard to determine what state the computer is in without seeing the screen.
I have tried the PRAM reset (holding CMD+OPT+P+R) during both the white startup screen, & the black screen to no avail. It seems unresponsive because I don't hear any additional chimes that I've been told should be heard during a PRAM reset attempt. I can't even be sure that the command is being inputted correctly because the light on my wireless keyboard remains off during the process.
I've tried rebooting over & over again; the results are the same.
The steps that led to the problem occurred thusly:
1 - I was trying to clear some memory from my current session, so I scanned through my active processes, quitting anything which seemed to be eating up considerable amounts of memory.
2 - One particular process I quit was 'launchd' which was functioning under my profile username.
3 - After quitting launchd, all opened apps seemed to close, & it looked like I was forcibly logged off the machine. The screen froze during this point, & I decided to do a hard reboot to log back in.
4 - The problem began after this hard reboot; startup seemed to occur as per usual; white screen > apple logo > progress wheel > and then suddenly, a black screen where the login screen should be.
I've shown a flashlight into the screen while it's black & it seems well & truly like the display has shut down while the iMac continues in the background. I have had issues relating to my screen going black before, but they were random & intermittent; they didn't occur without fail during the exact same time immediately after startup, & could be remedied by using the CTRL+OPT+EJT keys.
I am on an iMac 2010, 27", using I believe Lion OSX. I am unable to recall additional specifications while the problem persists.
Could anybody please help me? I'm quite desperate; I was in the middle of some urgent work that I need to get back to as soon as possible.
Thank you I'm advance to anyone with advice on how I can go about fixing this.
,c.

Gray screen appears during startup

Black Screen with white text at startup (??)

Hello All:
I have a 2010 15" MacBook Pro, just got it in June. Had to send it in for a logic board replacement and now have it back. Everything works great except now instead of having the standard Apple greyish startup screen, I have a black screen with white text that scrolls through all of the startup stuff. I figure they changed some line on a plist somewhere so they could watch the startup and make sure everything was OK, then forgot to change it back.
Although I know it is good to know what's going on under the hood, I would rather it started up the regular way. Anyone know how to switch it back? I would call Apple, but would rather not sit on the phone for a long time for what I believe is probably a very simple fix. I did a search but couldn't find my problem listed....
Thanks everyone...

Kappy:
Thanks for the reply. I looked at the plist, but the -v was not there. Here is a copy of the plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kernel Flags</key>
<string></string>
</dict>
</plist>
At least I know what it is called now - a "verbose startup".
Again, thanks for the help. Learn something new every day.

Startup - Black Screen

Similar Messages

Maybe you are looking for