Startup plug is missing

I developed a Webdynpro App. based on the Adaptive RFC method. My original application had a single window with several views. I had to delete my window and re-create it. I then added my views back to the new window. When I rebuild the project I get this error: "[APPNAME]:Startup plug is missing."
I have tried repairing and rebuilding, nothing works.
Any ideas?

Hi Kelly.
In the webdynpro explorer under the following path:
[your proyect] > [your principal component(*)] > Component Interface > Interface Views
Check that under Plugs tab of the interface view called [your window name]InterfaceView into Inbound Plugs area be the Default plug with the Startup property checked. If not exists this plug create it with the name Default and the startup property checked.
I hope that this helps u.
Best Regards.
Gregory

Similar Messages

Startup plug is missing - Wht this means

When i was building dc i was getting startup plug missing error.Can i know about this

Hi Sankar,
You will get that error when there is no startup plug in the Interface View. To resolve that error
1. Open your Interface View(which will be under your component->COmponent Interface->InterfaceViews)
2. Go to plugs->Inbound Plugs->Click on New->Now give the name as "Default" and select the type as startup->click on Finish.
3. Save All Metadata of your DC.
4.Reload you DC.
this resolves tour problem.
Thanks n Regards,
Jhansi Miryala

Error : startup plug missing

Hi,
I have a dc where i delete the old application , create a new one at its place.I set the properties of application as : authentication property to true.
The application builds and deploys fine...Since it is on track, creates an activity.But when i try to check in , i get error in activation view, while i check the CBS log, i find....'startup plug is missing'.
Any clues on this ??

Hey Vishal,
Thanks a lot for your suggestion but I just created a new application, didnt touch any windows.But still getting the following error in CBS Build Log :
[wdgen] [Error] com.sap.darpan.appli.Tryappli --> Application Tryappli: Startup plug is missing
Any clues on this ??

StartUp Plug Missing

Hello Experts
I am getting StartUp Plug Missing Error.
actually i add two window in one component and after deleting first one i am getting this error.
Please Help Me.

Hi Sunny,
The interface view of the component and its attached window should have a inbound plug of type startup.
The Web Dynpro application uses this plug to launch the window via interface view.
If this error comes it means
1) The application is not pointing to a component without startup plug mentioned.
OR
2) The interface view and window doesn't have a plug of type startup.
For 2) -> Open the controller of interface view and check that there is a plug of type startup. If not create one by name Startup and type startup.
Check the same in window controller. Create a plug of same name "Startup" and type startup.
Go to the application controller and check that in target interface view and plug you have have mentioned this interface view and this "Startup plug".
For 1) Go to the application controller and check that in target interface view and plug you have have mentioned is of type startup (Check Interface to find which plug is of type startup). Check that you have plug of type startup in interface view and window and of same name.
Hope it helps.
Best Regards,
Ashwani Kr Sharma

Startup Plug Error

Hi All,
    I have 2 sample applications say Exportex1 and Exportex2.
When I deploy exportex1from one machine and check for output, it is working fine as expected. When I deploy exportex2 from another machine, it is also working fine.
But Exportex1 is giving startup plug error when I log in into portals after the deployment of exportex2 application.
I find that Exportex2 is somehow overrides the Exportex1 application which means i can view only one application at a time in the portal.
Error:
RunTime Exception or StartUp Plug not found exception.
What could be the reason for this?
The application Name - Exportex1 , Exportex2
Project Name - Exportex1   , Exportex2
component Controller - Exportex ,   Exportex
Pls suggest.
Regards,
subashini.

Hi Ayyapparaj,
They are pointing to their corresponding interface views. But the component controller name is same for all the applications say Exportex1 and Exportex2. Will it make any problem?
Ex:
Application Name: Exportex1,   Exportex2
Component controller Name : Exportex, Exportex
Regards,
Subashini.

Quicktime plug-in missing in Safari, works fine in Firefox

Lion is working fine on my 2008 iMac - except - I can't play QuickTime movies. It tells me there is a plug-in missing. This only happens with Safari. When I view the same site in Firefox, the QuickTime files play fine.
What's going on here?

I found this answer on another thread, which may help - it fixed it for me:
Fixed the problem by going into Safari preferences, Extensions, and turned off the extensions for DivX... a temp fix, but will do for now!

Can't access my online banking log in- plug in missing?

can't access my online banking log in- plug in missing?

Access it or log into it? Try a different browser as a test.
Firefox

Call an Startup-Plug from another WDA

Hello.
How can I call a Startup-Plug from another WDApplication with a table-Parameters.
I get the URL from the Method cl_wd_utilities=>constuct_wd_url.
thanks for helping
Edited by: Marcus Ventur on Dec 2, 2008 11:33 AM

Hi,
Try to start your secondary application with a URL Parameter,
then fire any plug you want by checking the parameter,
hope it helps,
regards

My Mac Mail says that I have a plug in missing. How do I know which plug in is missing and where do I get it?

My Mac Mail says that I have a plug in missing. How do I know which plug in is missing and where do I get it?

Does this happen ONLY with Mail? Could you close all other applications and open Mail and check again? If this is still happening, please post a screenshot here.

Unable to uninstall Adobe Reader 7.0 (SSSecurity.api PLUG-IN missing) what should i do?

Unable to uninstall Adobe Reader 7.0 (SSSecurity.api PLUG-IN missing) what should i do?
I want to install adobe Reader 8.0 and first I would like to uninstall my Adobe Reader 7.0, However, when I click on Unistall, it says PLUG-IN SSSecurity.api is missing, and it won't allow me to unintall.
I am using Windows XP
What is the problem there?
What should I do?
Please help

When I want to install 7.0 again. (I tried to do a override file)
The following message will appear, and it will stop me from instal
"This Patch Package could not be opened, verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer patch package"

Error while startup: msvcrt.dll missing

Hi,
on some boxes (maybe windows 2000 ) we get a error while startup: msvcrt71.dll missing ...
whatÂ´s the problem ?

Andre,
since this is difficult to answer without a detailed description of the use
case, could you please post information about the how and what you are
trying to start, i.e. the command line, the operating system and what
version of JRockit you are using and have installed.
The file msvcr71.dll is needed by a few launchers and libraries inside the
JRockit JDK but those cases should be covered if launching using e.g.
java.exe. The only case that comes to mind is if you are trying to load the
jvm.dll directly, if that is the case you should copy
<jrockit-jdk>/jre/bin/msvcr71.dll to
<jrockit-jdk>/jre/bin/jrockit/msvcr71.dll to see if it helps.
Best Regards
/Robert
<Andre Frintrop> wrote in message news:[email protected]..
Hi,
on some boxes (maybe windows 2000 ) we get a error while startup:
msvcrt71.dll missing ...
what??s the problem ?

Selection of startup plug dynamically

Dear Gurus
I am facing a little confusion in understanding the plugs of a window. Please help me in understanding the concepts and correct the following statements
> Startup plugs are the plugs which the application can access
> Standard plugs are available accross components if they are made of interface type
Now my doubt is
> what is the necessity or why does the framework gives an option of creating more startup plugs if default plug of the window is first executed(assuming default is the plug which is first executed)
> how can i access other startup plug dynamically from the application instead of selecting the plug name?
> What is the actually happening when i make the a view as default? has it anything to with windows plug?
Is there any demo program which will help me understand this in a better way..
Please tell me if i can dynamically call the startup plug instead of selecting the startup plug and window name from the application properties.
Regards
Imran.
Edited by: Imran Pasha on Nov 30, 2010 10:43 PM

>
Imran Pasha wrote:
> Now my doubt is
> > what is the necessity or why does the framework gives an option of creating more startup plugs if default plug of the window is first executed(assuming default is the plug which is first executed)
Hi,
<-- Removed by moderator - cut and paste from SAP Help -->
Your assumption about default plug is not correct. Default plug is there as default, you do not have to define any other start up plug explicitly. You can define more startup plugs if you want to have different behavior. Wehn you create a application you can specify the component, window and startup plug. Most of the time Default plug is good enough. Some cases you have many application using one window with different start up plugs.
>
> > how can i access other startup plug dynamically from the application instead of selecting the plug name?
<
see the dynamic programming. There are few examples mentioned here.
[Dynamic programming|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/4c/60154219fce12ce10000000a1550b0/content.htm]
>
What is the actually happening when i make the a view as default
<
when you make a view default in the window means that whenever the window is being called for first time this view will be the first what you see. Normally navigating via a plug into a view would trigger a event and for every inbound plug there is a event handler. When you make a view as Default inside the window then the view is not called using an inbound plug. You can create a view and embed into a window with out even creating any inbound plugs.
>
what is the difference between startup and standard plugs with in the scope of single component.
<
It is explained here.
[Window plugs|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/455c6980f81962e10000000a114a6b/content.htm]
To call or close a Web Dynpro application using an interface plug, the relevant inbound plug must be declared as a startup plug, and the relevant outbound plug as an exit plug. You need interface inbound and outbound plugs of type Standard for component usages - that is, precisely when an outer component is being connected to an inner component
>
Is there any demo program which will help me understand this in a better way..
<
Search for WDA componets starting with WDR* in your system. I would suggest you to understand the basics of Webdynpro and its architecture before you attempt to Jump into examples and tryout.
Good luck.
Edited by: Neil Gardiner on Dec 1, 2010 9:27 AM
Edited by: Neil Gardiner on Dec 1, 2010 9:28 AM

ESB TDM Plug in missing

I try to use EXS Instruments on my DAE AUX objects. I am not able to do so, althoug I was able to do so in OS9 wiht out problems. Logic during start up complaints "ESB Plug In missing". Consequently when I try to make an Audio object to a TDM object, "direct TDM" is greyed out. Where might the plug in be gone? Can I download it anywere? Please help!
Thomas

t.kuerrev, "ESB TDM Plug in missing" #3, 05:51pm Sep 24, 2005 CDT
The manual says, as soon as I install a Protools System with a appropiate DAE, the TDM EXS should work too.
Yeh, but PT should be installed before you run the Logic installer, otherwise how can it find the Digidesign plugins folder to install the ESB to ?
What the manual says , right in the beginning, is:
We have also assumed that you have connected your TDM system to your Macintosh,
and have installed (and tested) the Pro Tools system software. A correctly installed and
operational ProTools system will ensure a reliable Logic Pro/DAE system.

Midi "plug-in" missing

Since downloading Yosemite, thus far revealed to be a mistake, I cannot play MIDI files on many but not all sites. "plug-in missing" but there is no option to download same. What to do?

In case this happens to others you need to update Flash player!

Plug in missing on Lion?

Hi all,
I've upgraded to OS Lion and all works perfect, but can't watch certain video-clips on web pages like apple's itself (the tutorials). It says plug-in missing but doesn't point to what exactly. Quick time is installed, works fine, movies play through quick time too so it's a bit puzzling! Any suggestions?

I have the exact same problem. I have scheduled an express lane call with Apple.
Please let me know if you find out the problem
Imac Core i7 8 gig Ram

Startup plug is missing

Similar Messages

Maybe you are looking for