State chart without NI state chart module

I have read the design article on state machines in Labview in http://zone.ni.com/devzone/cda/tut/p/id/3024 and gone through the cannon and coin machine examples. I am attempting to build my own state machine (have the state machine diagram as well as the states of my i/o laid out, which will be attached later) without the state chart module b/c I don't think my model is complex enough to justify the purchase. However, after reading the design article, I still don't quite understand how to use the digital logic function palettes to link between each state of my state machine using the status of the inputs. Does anyone have any insight on how to get started on this as I'm still confused after going through the examples?

No problem, happens once in a while. My post just ensures that all answers will be in the same thread.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Configuring the appbuilder chart using SQL Statements

Hi all!
I am able to create a chart using .mameta
My Chart is able to read in data and display on a chart successfully.
What i could not achieve was that the chart doesn't read and display the numbers correctly as shown below.
It read by ID instead of TOTAL COUNT
Does anyone knows how to display the count correctly?
Your replies is much appreciated.

Hi Satish,
Modularity per se, i.e. using a function implies a new database object, source control et. al. which is an overhead.
If we can use an sql statement and handle it in the control file itself, then any future enhancements/bug fixing would involve only modification to the control file, i.e. patching would be easier in this case.
Thanks for the reply!!!
Have a nice day!!!

I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

Thanks Gary, but no, that does not work. First of all, I can't select each bar individually. When I click on one bar, all three bars are selected.
When I use "inspector > graphic" I have 5 fill options: none, color, gradient, image, tinted image. The default selection for the theme I'm using is image. What I would like to use for my charts is the same image that this theme uses for table headers. It has the same texture as the chart, but a different colour. Using anything but image or tinted image removes the texture from the fill.
I have found I can do one of two things. I can select tinted image from the fill selections in "inspector > graphic" or I can select 2D Image Fills from "inspector > chart > chart colors". The first choice does not allow me to match the table header colour because it only allows me to apply a tint to the existing colour and adjust its opacity. The existing colour has too much influence on the fill, so I can't find an RGB adjustment that will match the table header colour. The image selections from "inspector > chart > chart colors" do not quite match the colour or the texture. Again, I can try to tint the image, but I still can't get it to match and the texture is not the same anyway.
The image I want to use obviously exists in the software as it is an attribute of the theme, but for some reason is inaccessible. The other angle I have tried is to edit the theme, but I can't figure out how to do that either.

Financial statement version without data?

Hi,
we use F.01 (RFBILA00) to show the Financial statement.
Question: Is there any Program / tcode etc. to show only the
financial statement version without any data, only the structure?
Thanks,
Regards, Dieter

Hi!
Press F1 button on the financial statement structure field. On the popup, press button Customizing. This will guide you to the structure.
Regards
Tamá

How can I print the figures (text) in a chart WITHOUT a cast shadow?

hi all,
in charts (line, column, etc.) i want display the figures (plott points) without cast shadows. Although the cast shadow option in the format bar isn´t aktiv, there is always a lighlty cast shadow when i´m printig the document and in my opinion it looks bad.
isn´s it possible to print the figures (text) of a column chart without a cast shadow? btw: the same effect in pages.
thx a lot
rudi

Hi rudiRocket,
Welcome to Numbers discussions.
Yes I see what you're talking about, never noticed it. To remove the shadow I tried numerous fonts but, still the shadow. Let's hope someone else has a better answer. Be aware folks on these Discussion boards are, as yourself end users not Apple employees.
In the mean time please read the below instructions:
Send feedback directly to the Numbers team for enhancement requests: at the top of your screen to the right of the blue Apple please click "Numbers" > "Provide Numbers Feedback". Explain in detailed what you've found. This makes your request known to the Numbers team directly; don't expect to hear back from them. I've sent many as well.
Let's hope the next version of iWork incorporates many of the requested enhancements.
Thank you in advance for doing that.
Again, welcome to Numbers Discussions, have fun here.
Sincerely,
RicD

Audio playback from within a state machine without halting execution

I have created a state machine that acquires and analyzes an input signal and transitions states based on triggers detected within that signal. In one particular state I need to play back a prerecorded file (right now I am just using a .wav file for testing purposes). I understand that due to the data flow model the state machine hangs up during the playback state until the playback is finished, but I need to find someway around this. Obviously, whenever the machine hangs up it cannot continue acquiring and analyzing the signal. How can I start the playback from within the state machine without halting its execution?
Solved!
Go to Solution.

Do you use the sound output VIs? If you do, try this. On the "Play Sound File VI" set the timeout value=0
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Scroll Chart Without Zooming

Hello,
I want to scroll my Line chart but without zooming the chart is it possible if so how can i achieve this ?My second question is how can i enable and disable this scroll bar with the help of two buttons one for enabling scrollbar and second for disabling.

Hello,
Thank you for your efforts sir,
Zooming for Line chart is OK But i dont want to apply any scroolbar or zooming to my Column chart that is what i want. I want to aplly scrollbar and zooming conditionly.
If it is Line chart scroll and zooming will be applied as in your code i.e by using below code and code helped me too in understanding but and if it is column chart then no scroll bar and zooming should be applied
Chart1.ChartAreas(0).CursorX.AutoScroll = True
Chart1.ChartAreas(0).AxisX.ScaleView.Zoom(0, 200)
Chart1.ChartAreas(0).AxisX.ScaleView.SmallScrollSize = 5
Chart1.ChartAreas(0).AxisX.ScaleView.Zoomable = False
Chart1.ChartAreas(0).AxisX.ScrollBar.ButtonStyle = DataVisualization.Charting.ScrollBarButtonStyles.SmallScroll
Chart1.ChartAreas(0).CursorX.AutoScroll = False
'Chart1.ChartAreas(0).CursorX.IsUserEnabled = True
'Chart1.ChartAreas(0).CursorX.IsUserSelectionEnabled = True
'Chart1.ChartAreas(0).AxisX.ScaleView.Zoomable = True
'Chart1.ChartAreas(0).AxisX.ScrollBar.IsPositionedInside = True

Cursor invalidation WITHOUT DDL statements

Hi, all.
The db is 11.2.0.3 on a linux machine.
As we know, ddl statements on database objects cause cursror invalidation.
A number of cursor invalidation WITHOUT ddl statements means that shared pool is too small?
The following is a part of AWR report.
Library Hit % is near to 100%, but I can find a number of cursor invalidation from v$sql view.
What could cause cursor invalidation except ddl statements?
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00 Redo NoWait %: 99.99
Buffer Hit %: 99.39 In-memory Sort %: 100.00
Library Hit %: 100.02 Soft Parse %: 99.99
Execute to Parse %: 86.93 Latch Hit %: 99.39
Parse CPU to Parse Elapsd %: 91.51 % Non-Parse CPU: 97.42 Thanks in advance.
Best Regards.

869578 wrote:
Hi, all.
The db is 11.2.0.3 on a linux machine.
A number of cursor invalidation WITHOUT ddl statements means that shared pool is too small?
That could cause reloads, but not invalidations.
A possible cause of invalidations on your system could be that the number of child cursors for a parent has become too large.
The following is a part of AWR report.
Library Hit % is near to 100%, but I can find a number of cursor invalidation from v$sql view.The library cache portion of the AWR would be the relevant bit if you think you have a problem with invalidations.
The instance efficiency is virtually useless at the best of times,http://jonathanlewis.wordpress.com/2006/12/27/analysing-statspack-2/ it's irrelevant in this case.
Regards
Jonathan Lewis

Run Aggregate Without Update Stats

When ever I choose "Roll-up of filled aggreates" in my process chain it does the rollup in 180 seconds and then spends 1 hr with update stats. The update stats does not need to run but once per weekend. Is there a way to do the rollup without the update stats part.
Also does the same if you click the "Rollup" from the infopackage.
Any help will be rewarded !
Thanks
Richard

There is an RSADMIN option that turns off all BW initiated stats collection, at which point you must have an appropriate process in place by running BRCONNECT or other statistics collection approach.
Also saw a new Note <a href="https://websmp104.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012003146900000053702006">938040</a>that indiates there is some debate at SAP whether the option should continue to be supported beyond 2004s SP7.
Check Notes - Deactivating BW-initiated DB statistics <a href="https://websmp104.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200001729112002">555030</a>

I'm trying to draw a candlestrick chart without using the open and close fields

I'm trying to draw a candlestrick chart without using the
open and close fields, however I am seeing nothing on the cart. The
horizontal and vertical axis are displaying their labels correctly
for the data. Any ideas what is going on here?

"nikos101" <[email protected]> wrote in
message
news:gi5rh4$ptn$[email protected]..
> Is it not to draw the line between the high and low
then? The data I
> recieve has no open and close data :(
>
I've never seen a candlestick that didn't have all 4
properties.
You may find the floating columns do what you want here
http://demo.quietlyscheming.com/ChartSampler/app.html
or possibly the
vertical line type will work for you.
HTH;
Amy

Why can't there be a simple utility that shows me which device connected to my Airport is using how much of the bandwidth in a simple graphical or stats format without requiring me to be a level 10 Black Belt or Chuck Norris' paternal tooth fairy?

Why can't there be a simple utility that shows me which device connected to my Airport is using how much of the bandwidth in a simple graphical or stats format without requiring me to be a level 10 Black Belt or Chuck Norris' paternal tooth fairy?
I need to see who is consuming the most bandwidth and limit that user/device. A very simple and dare I say it, legal, moral, and normal wish.

They are not overloading the Airport. They are overwhelming the capacity of your Internet connection.
No. It's not "shared equally". That's not how packet switched networks function.
Most consumer grade routers do not have the ability to restrict bandwidth use on a per machine basis. You need relatively expensive (but readily available) equipment to do that.
How many people are on the network? It can't be that hard to hunt them down.

Using "Organizational Chart Launcher" and "Organizational Chart Tester" iVi

Hello,
For MSS, we would like to display a graphical version of Org Chart. We are not at a stage where we can implement OrgPublisher at this point.
We did configure u201COrganizational Chart Launcheru201D and u201COrganizational Chart Testeru201D iViews in the portal, and they look semi decent.
Our concern is that some old documentation states that these iViews are only are for Test purposes, and not for production! We want to know if we can use these iViews as an interim solution until we move onto OrgPublisher?
Any help would be much appreciated...
Thanks,
Harman

Hi Harman,
I am not sure I can say yes or no to your question, but my advice would be to raise an OSS message with SAP and see what they say. The main thing I would ask is why they are not recommended for production use...?? If you understand why you can make the judgement call whether or not to use them in production (e.g. do they not perform well, what additional load do they cause etc...), with that information you can then decide if it makes sense for you to use them in your situation (e.g. you might have very limited users).
BRgds,
Simon

How to use INSERT INTO ALL statement in jdbc prepared statement with beans

Kindly give me some example that how we can use "INSERT INTO ALL STATEMENT" in jdbc prepared statement inside a jsf bean?
Actually i want to take employee id's of present employees using single jsf page and using one textbox for each employee id.
How can i use INSERT INTO ALL statement to achieve this?
Following is my code snippet.
AttendanceBean.java:
public class AttendanceBean {
private int atteid;
private String attdname;
private int attday;
private int attmonth;
private int attyear;
public static Connection getAttConnection() throws Exception {
String driver = "oracle.jdbc.driver.OracleDriver";
String url = "jdbc:oracle:thin:@localhost:1521:globldb3";
String username = "scott";
String password = "tiger";
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, username, password);
return conn;
public String addAttendance(){
Connection conn = null;
PreparedStatement pstmt = null;
boolean committed = false;
try {
conn = getAttConnection();
conn.setAutoCommit(false);
String query = "INSERT ALL INTO attendance VALUES (?,?,?,?,?)";
pstmt = conn.prepareStatement(query);
pstmt.setInt(1,this.atteid);
pstmt.setString(2,this.attdname);
pstmt.setInt(3,this.attday);
pstmt.setInt(4,this.attmonth);
pstmt.setInt(5,this.attyear);
pstmt.executeUpdate();
conn.commit();
conn.setAutoCommit(true);
committed = true;
return "home.xhtml";
} catch (Exception e) {
e.printStackTrace();
return "CRM.xhtml";
} finally {
try{
if (!committed) conn.rollback();
if (pstmt != null) pstmt.close();
if (conn != null) conn.close();
}catch(Exception e){
e.printStackTrace();
}

Check this program for some info on Push buttons:
1-DEMO_DYNPRO_PUSH_BUTTON
2-DEMO_DYNPRO_MODULE
3-DEMO_DYNPRO_ON_CONDITION
Suppose Your screen is 101
Then in that screen create one push button and assign it a function code.
Now in the PAI of the 101 screen
Create Module for user command
Inside that module checc the sy-ucomm if sy-ucomm eq <Function code of your push button>
Insert the values in database.
*& Module USER_COMMAND_0101 INPUT
process after input for screen 0101 *
MODULE USER_COMMAND_0101 INPUT.
CASE OK_CODE.
WHEN 'SAVE'.
*Insert the values here
WHEN 'DISP'.
ENDCASE.
CLEAR OK_CODE.
ENDMODULE. " USER_COMMAND_0101 INPUT
Regards
Neha
Edited by: Neha Shukla on Dec 3, 2008 1:02 AM
Edited by: Neha Shukla on Dec 3, 2008 1:02 AM
Edited by: Neha Shukla on Dec 3, 2008 1:06 AM

Using a different default component state within each page state

I am using a custom component in multiple page states but would like to have a different default state (for the same custom component) within each page state.
Is there anyway to use a different default component state within each page state .
When I change the default state at a component level it seems to go across all my page states. Any solutions?
Thank you

I guess I can just add that interaction for that component!
I think my brain is just catching up

Horizontal Bar Chart and Overlaying Line Chart

I am using SSRS 2008 and developing my reports in BIDS.
I have a report with two data points. I want to chart the first as a bar (horizontal) chart and then the second as an overlaying line chart.
I created both data series, originally, as a bar chart. I have clicked on the second series in the "Drop Data Fields Here" area and changed the chart to a line chart. When I do that, it changes both series to a line chart.
However, if I use the column (vertical) chart for the first series, it will let me make the second one a line chart.
Is this a limitation of SSRS 2008? Can I not have one data point be the horizontal bar chart and the second one a line chart?
If so, are there any suggestions how to get around this?
Thanks.

Both charts for SSRS 2005/2008 are very limited when it comes to horizontal charts and are infact supporting only left-to-right bar charts, with no ability to combine them with other charting types (lines, areas, points etc.). For a SSRS charting solution that supports all types of charting type combinations in left-to-right and right-to-left horizontal fashion you can use Nevron Chart for SSRS - www.nevron.com. Besides a huge number of charting types and subtypes (most of which are not available in the MS Chart for SSRS 2008) it also provides better image quality in 2D and 3D modes, more settings, has support for rich text formatting in texts, has image filters, ability to customize via C# code and implements many more large and small charting related details.
Best regards,
Crank

State chart without NI state chart module

Similar Messages

Maybe you are looking for