Using a different default component state within each page state

I am using a custom component in multiple page states but would like to have a different default state (for the same custom component) within each page state.
Is there anyway to use a different default component state within each page state .
When I change the default state at a component level it seems to go across all my page states. Any solutions?
Thank you

I guess I can just add that interaction for that component!
I think my brain is just catching up

Similar Messages

Different background image (div) on each page of site complicated by template

Hope I can explain this: Below are specifics
- Using Dreamweaver cs5.5
- Making the pages from a template.
- Each page will have a different backround image; but the image is contained in a div tag (div name is .mainbackground) which runs behind the main core of the site, the image is not in the <body>
- The div .mainbackground is EDITABLE
- I have already made a specific css class to assign to that div on each page so that the image is different on each page.
- On the template page the div .mainbackground has no image class assigned to it (thus no background image)
- Since that div is editable I can then go into each page and assign the desired image class to it - works great. EXCEPT...... & here's my main question:
- In the code all of the other regions are contained IN that above mentioned div of .mainbackground SO that means that:
- if I need to update the structure of the pages I will have to remove the Editable region that controls the background image which would be - removing the .mainbackround editable region. Then go back to my template, make changes and save everything - thus all the changes will carry through to my other pages. This is good and bad because I would get all the structural changes but I would also loose all of the text specific to those pages.
-Then when I'm finished I would have to go back and first add an editable region back to the .mainbackground class and then re-apply the background classes back to the .mainbackground to fix the images on the pages again...
The site is very small site so I can deal with it but am I going about this all wrong?
Is there some template feature I'm not getting? I would like to keep using the template feature, and i do want a different pic on each page.....
I have attached a picture showing one page so you can see the background image - which will be different on each page.

If your Template has embedded CSS within the <head> tags, and the <head> has an editable region defined, you should be able to change styles in child pages.
TEMPLATE CODE:
<head>
<style type="text/css">
.mainbackground { }
</style>
</head>


CHILD PAGE CODE:
<head>
<style type="text/css">
.mainbackground {
background-image:url(page2-BG.jpg)
</style>
</head>
Give it a try.
Nancy O.

Is there a way to use a different slideshow on all iWeb Photo pages?

I am getting real tired of the iWeb slideshow. Hard to adjust the timing, scales automatically even when you don't want it to, etc...
I did some searching on this site and a few people, such as Old Toad are mentioning SimpleViewer or Jalbum. But it sounds like it has to be setup individually for each page by modifying the html file in idisk/resources, etc...
While that would be fine for just a few pages,I have a photo blog with about 20 pages that are constantly been updated and more are added each week. I would like to be able to automatically change the default iWeb slide show to something better like Jalbum. Is there a way to do that by simply adding an html snippet on each page in iWeb directly? And if so, what would that code be for the Bananalbum as shown on OT's demo page?
Thank you very much indeed.
Bo

Hard to adjust the timing
that can be changed: http://discussions.apple.com/thread.jspa?messageID=5199553
if you use iweb blog/podcast/photos and album templates then you need to know that they are rendered by javascript/AJAX... so you can use javascript/AJAX to alter them, slideshow and what not.
Here are some of my examples:
http://www.cyclosaurus.com/iWeb3Widgets/Lytebox/Photos.html
http://cyclosaurus.com/iWeb3Widgets/Highslide/PhotosPage.html
http://cyclosaurus.com/iWeb3Widgets/Couloir/Photos.html
they were built in iweb with my widgets, no pre-processing, no post editing, no flash.

I want to set default printer settings to be used only for a specific type of application, certain documents. All other print jobs should use a different default setting for the printer.

I am printing a specific document from a web based application. This document need to be printed in landscape. So I would like to set the default settings for this specific printer to landscape. But for all other printers it should be portrait. But this does not seem to work. The browser picks the settings from the standard/default printer and uses this for all print jobs.

Embie wrote:
I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware. Great. I will replace my faulty hardware manufacturer. Simple, HP never again.
In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you. Please read this post then provide some details in a new thread. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? What is the problem you are having (with the printer...)?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Changing the body image on each page with CSS

Hi,
I need to have a different background image for each page of this site (body)
1) I have one template currently
2) I have one css file currently (linked)
I've done a lot of research as to how best to do this including;
a) Using different body id's for each page
b) Using another css rule for body (inserted into th file AFTER the main linked ccs file)
Because I am using templates I can't see an easy way to do this (Header is largely locked) and have little control over position of b) and the same for a) as the body tag is also locked. I have also looked at "specify editable tag attibutes in a template" but couldn't get this to work.
There is something simple to do here but I cannot see it.
Any sample / advice would be appreciated.
Rick

John and DWILCOX01,
OK I tried it - it seems to be working ok although I have to test a few things.
However the one thing I did was remove the body style from the linked CSS file as the linked file is BELOW the new body style...
Although am I correct in assuming that if the new body style you suggested is added AFTER the linked CSS file then I don't have to worry?
Thansk,
R

Using an WD Component twice within the same Component

Hi all,
our company has made a WD Component for editing business partners.
My job is to build a WD Component where two business partners (different roles) are edited within the same window.
My idea was to make 2 separate component usages of the Business Partner WD Component within my component.
This just works fine. But there is a problem when mapping the context of both Business Partner-Components into my WD Component. There are always naming conflicts. This is because it is not allowed that there are two nodes with the same name in the context, even if they are in different subnodes. Renaming the nodes after mapping them in my component also doesn't work, because it is not possible to rename nested nodes.
Does anyone know a solution?
Kind regards,
Florian

Hi Anurag,
thank you for giving me help. You are right, it is possible to use a component twice within the same webdynpro component.
But the problem is the context mapping in the target component.
Let me give you an example.
This is the context of the twice used component.
CONTEXT
|
|->NODE_1
| |
| |->SUBNODE_1
| | |
| | |->SUBSUB_NODE_1
| | | |
| | | |->ATTRIBUTE_1_1_1
| | | |->ATTRIBUTE_1_1_2
| | |->SUBSUB_NODE_2
| | |->SUBSUB_NODE_3
| | |->ATTRIBUTE_1_1
| | |->ATTRIBUTE_1_2
| |->ATTRIBUTE_1
| |->ATTRIBUTE_2
| |->ATTRIBUTE_3
Now, if i map this context (NODE_1) to the target web dynpro component I have a problem. I have to map it twice (one time for each used component), so that i can access both used components. But WebDynpro only allows me to rename the node NODE_1. Mapped subnodes (SUBNODE_1, ...) cannot be renamed. So i cannot map the context of both used components, because there are always naming conflicts. WebDynpro doesn't allow that there are two nodes with identical names within the context, even if they are in different subnodes.
Is there a solution? We really need one.
Thanks
Florian

How to use different default parameter value for different report subscriptions

In ssrs is it possible to define different default parameter values for different subscriptions? In the following example I have a report which has two subscriptions with different start date and end date values:
Report name – Testsubscription.rdl
Subscription-1
Input parameter (default values):
start_date = first day of current Month
end_date = till date
Subscription-2
Input parameter (default values):
start_date = first day of current Quarter
end_date = till date
I know an alternative way of doing this would be to copy the rdl file with a different name but I am curious whether this can be done within a single report definition file. I am using SQL Server 2008 R2 Standard Edition.
Thanks!
spp

Hi sppdba,
As per my understanding, there is a report with two parameter: start_date and end_date, you want to configure subscription for the report, and set different default values for start date and end date. And you want to know if it is possible to achieve you
goal by using a single report definition file.
Since you are using SQL Server 2008 R2 Standard Edition, we need to achieve your goal by configuring two subscriptions for the report. For detail information, please refer to the following steps:
1. In design surface, right click start_date and open Parameter Properties dialog box.
2. In General pane, type Name and Prompt, set Data Type to Date/Time.
3. Click Available Values in left pane, select Specify Values.
4. Click Add button, in Label text box, type “First day of Current Month”, click (fx) button in Value section, then type the expression like below:
=DateSerial(Year(Now()), Month(Now()), 1)
5. Click Add button, in Label text box, type “First day of Current Quarter”, click (fx) button in Value section, then type the expression like below, then click OK.
=DateSerial(Year(Now()), (3*DatePart("q",Now()))-2, 1)
6. Right click end_date and open Parameter Properties dialog box.
7. In Available Values pane, select Specify Values.
8. Click Add button, in Label text box, type “Today”, click (fx) button in Value section, then type the expression =Today(), then click OK.
Now that the parameters are created, we need to configure subscription for the report. For detail information, please follow these steps:
1. Open Report Manager, and locate the report for which you want to create a new subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Subscription.
5. Select the delivery extension and data source for the subscription.
6. Select a method of delivery, then choose report delivery options.
7. Specify conditions that cause the subscription to process and delivery to occur.
8. Set start_date to First day of Current Month, end_date to Today, then click OK.
9. Create a new subscription as step4 to 7, set start_date to First day of Current Quarter, end_date to Today, then click OK.
The following screenshots are for your reference:
For detail information about Creating Standard Subscriptions, please refer to the following document:
http://msdn.microsoft.com/en-us/data/ms156307(v=sql.105)
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

I have 10 UiWebView to load different charts and maps on an iPad,using UIScrollView to scroll through each page, problem is on loading of each UiWebView my UiScrollView does not scroll smoothly to other pages horizontally,so how to make the scroll smooth?

I have 8-10 UiWebView's to load different charts and maps on an iPad, i am using UIScrollView to scroll through each page, problem is while loading of each UiWebView my UiScrollView does not scroll smoothly to other pages horizontally, my query is can i load UiWebView on background and how to make sure the scoll of pages is smooth, even though the loading of UiWebViews may take time.
Note :i have tried disabled scrolling on webview, so when i scroll on the page the scroll event will be of UiScrollView, so believe no conflict with UiWebView.
also in ios 6 i read about suppressesIncrementalRendering = True but i want to support ios5, also as UiWebViews are said to be running on main thread by default, i suspect when loading of webViews and when user tries to scroll the page, the main thread is busy, but i want the scroll of the page to be smooth even though the loading of UiWebViews may take time.

You will probably get a faster and more accurate answer if
you repost in the Developers Forum.

How to use two different versions of the same jar within one project

Hi everybody!
I have a big problem while integrating different web service clients within one bigger java project. Both implemetations need some jar files to work but demand different version. So, i would like to know if there is any way to tell which implementation should use which version! Anyhow i add those jars to the classpath makes working only one or the other webservice working but never both! Any ideas somebody?
Best regrads,
Stefan G�tz

Of course do have the jar files different names but the classes inside of them are the same ... means that the standard system classloader can distinguish them. When you add a jar to a classpath the name actually dosent matter.... any other ideas, please?
PD.: i tryed to add a manifest file to the one jar which makes use of one of the dublicated jars to specify which jar to take direcly but it makes no difference since once classes loaded they cant be distinguish ....see:
http://java.sun.com/docs/books/tutorial/ext/basics/load.html

SBO - How to use two different Stock Account within the same Item Group

Hi,
I'm currently stuck within one of my implementation.
I'm deploying the same solution worldwide which worked pretty well until now. All the items are connected to an item group, with a unique GL account, supposed to book at the same time the good receipt and the good issue (Balance-Sheet Account = 14xxxxx).
My new unit is willing to use two different GL accounts when performing its stock entry (let say 14xxx10) and another GL account for the good issue, let say 14xxx20.
Do you have any clue so i can please them and keep using at the same time the item group ?
Thanking you in advance
Stephane

Hi,
In fact, we use the GL account as the HQ Account (Reporting Account) while the "Export Code" will be used to store the local GL Account (greek account).
As such, we can, somehow handle two different chart of accounts.
In my reporting, i'm only using a single GL account for stock movements, while my greek counterparts want to handle two different accounts.
Threfore, i have only two solution since there is normally a one to one relationship between a HQ account and a local account that are :
1 - Duplicate the HQ accounts
In that case, i do respect anytime the one to one relationship. I've got one HQ account for one local account. But how can i put this since i can only handle one single stock account.
2 - I keep my single stock account like this but i won't be managing the possibility to get two different Export Codes.
Regards
Stephane

How to use the different class for each screen as well as function.

Hi Experts,
How to use the different class for each screen as well as function.
With BestRegards,
M.Thippa Reddy.

Hi ThippaReddy,
see this sample code
Public Class ClsMenInBlack
#Region "Declarations"
    'Class objects
    'UI and Di objects
    Dim objForm As SAPbouiCOM.Form
    'Variables
    Dim strQuery As String
#End Region
#Region "Methods"
    Private Function GeRate() As Double
            Return Double
    End Function
#End Region
Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
        If pVal.BeforeAction = True Then
            If pVal.MenuUID = "ENV_Menu_MIB" Then
            End If
        Else ' Before Action False
            End If
    End Sub
#End Region
End Class
End Class
Rgds
Micheal
Vasu Anna Regional Feeling a???? Just Kidding
Edited by: micheal willis on Jul 27, 2009 5:49 PM
Edited by: micheal willis on Jul 27, 2009 5:50 PM

Using a different user(other than default PI user) with adapter module

Hi,
We are having a custom adapter module built to interact with a Hardware Security Module(HSM). This custom adapter module by default uses a PI user configured in the system. However, we are not able to pass commands to HSM because of insufficient authorizations to this PI user. Now, we do not exactly know the permissions required for the user to access HSM. We have asked the HSM support team about the same. However, I wanted to explore the possibility of using a different PI user to work with the adapter module and eventually pass commands to HSM.
We have an admin user configured which has all the necessary authorizations. Is it possible to use this admin user created on PI system to work with adapter module so that it passes commands to HSM?
Thanks,
Ravi Desai

We have given the necessary authorizations to PI user.

HT5622 How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

Create a new Apple ID for the second phone. If you are setting the phones up as new phone enter the ID you want to use on each phone.
If both phones are already signed in to one Apple ID then use the settings app to change Apple IDs on one phone.
Settings > iTunes and App Store > tap on the Apple ID > sign out > sign in with alternate Apple ID.
Note that if you have downloaded apps with the original Apple ID on the phone with the new Apple ID, those apps will still be associated with the old Apple ID and will require the old ID and password in order to update them.

HT1311 I have two iPhones on my account, but I want each to use a different iTunes account so that the directory for one iPhone does not end up on the other when both use the cloud to sync. How to do it?

I have two seperate iPhones on my cellular carrier, but since I unwisely used the same AppleID for both phones iTunes, the two different users end us seeing each other's apps and directories of phone numbers (when each is sync'd through the cloud).
How do I take one of the two phones and move it to a different Apple account?
Thanks

To move one of the phones to a different iCloud account (if that's what you want to do), go to Settings>iCloud and turn all synced data to Off. When prompted, choose to keep the data on your iPhone. After everything is off, scroll to the bottom and tap Delete Account. This will delete the account from the phone but not from iCloud so the other phone will not be effected. Then set up a new iCloud account with a different Apple ID and turn iCloud syncing in Settings>iCloud back to On. When prompted, choose Merge. This will upload the data to the new iCloud account.
You will then have to go to icloud.com and sign into each iCloud account separately and delete any unwanted data that you don't want on the phone syncing with each account.

Changing tab name in one component that used in different applications -FPM

Hi gurus,
I have an FPM component configuration, which have different tabs.
This component i have used in different applications.
I just want to know how can I dynamically change the name of one tab in different applicatins?
I want to change only the tab name. content in the tab is same.
For eg. If I open a Bid from Rfx, it should show "Rfx Information" as one tab name. But if i open a bid from Auction, it should show 'Auction Information'.
Content in this tab is same.
Is there any way to do that? Or shall I create different component config. for bid to use in Auction application and another one for RFx application?
Thanks,
Poduval

Hi, 3Sherill3. This may help:
http://www.macupdate.com/info.php/id/16620

Using a different default component state within each page state

Similar Messages

Maybe you are looking for