State Diagram "Single Step" execution mode

Hello,
I am realtively new to LabView, at least the 8.0 version I am currently using. Used it when it first came out some xx years ago :-)
I am using the State Diagram Toolkit to create a test vi. I am able to create a SubVI of the test vi. I did **not** have to unlock the generated code to do this, and I could still open the subvi diagram in the State Editor later.
However, if I in the State Diagram Editor select "Execution Mode" to "Single Step", then LabView 8.0 crashes when I save the vi.
Please help me on this one, as I would like to explore using subvi's developed using the State Diagram Toolkit and the Single Step execution mode.
(I have indeed searched without finding the solutiion to this problem)
Also, if anyone have an examples on how to use a "Single Step" subvi developed with the State Editor Toolkit, I would appreciate this !
(Especially how to return the next state from the subvi and use it in the next call)
Tips and examples appreciated !
Geir Ove
Geir Ove

Hi,
A work around has been found for the issue. If after changing the state diagram type to single-step, you make a change to the block diagram then you can save with out a problem. There are two easy ways of doing this.
1. One is to add a new state to the state chart after changing the mode (this can be deleted after the save).
2. The other is adding a Boolean constant to the block diagram (which can also be deleted after the save). Adding a control on the front panel or moving a label in the block diagram is not enough.
Regards,
Frode

Similar Messages

TestStand 3.5 step run mode ingnored during execution

Hi,
I am seeing a problem in Teststand 3.5 to do with the step run mode. I have a sequence which i have a number of steps that i have set the run mode to skip. However when i execute the sequence some of the run mode skip settings are ignored, by this i mean that they are set back to run mode normal.
It is always the same test steps that this happens with, one step is a numeric limit test and one is a CVI dll multi numeric limit test call. I have tried saving the sequence under a different name in case the sequence has somehow corrupted but this made no difference.
Has anyone seen this before?

Hi,
Is it possible to post an example highlighting this problem?
regards
Ray Farmer
Regards
Ray Farmer

VI Works Single Step at a Time, But Not When Run Normally

I'm very new to LabView and have created a simple VI to record a single measurement from my HP 34401A Multimeter over an RS 232 connection.
The problem that I'm having is that the VI only works when I run it a single step at a time (clicking the single step button until it's completed). When I try to run the entire thing though, I get the following error:
Error -1073807339 occurred at VISA Read in Untitled 2
Possible reason(s):
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
After reading through the help page for that error, I tried adding a time delay, but that did not fix the problem.
(http://digital.ni.com/public.nsf/allkb/874B379E24C0A0D686256FCF007A6EA0)
NI I/O Trace didn't provide any answers for me, but I've attached a shot. Lines 1-13 are from the single step run, the rest are from attempting to run the entire thing at once.
Can anyone please help me understand what's going on here? Thanks in advance!
If anyone is interested:
Windows 7
LabVIEW 2009
HP 34401A Multimeter
RS 232 connection is through a USB-Serial adapter
Solved!
Go to Solution.
Attachments:
Front Panel and Block Diagram.png ‏112 KB
NI IO Trace.png ‏91 KB

The only thing I can think of is that you are sending the remote command and then not waiting long enough for it to complete. The manual states:
It is very important that you send the
SYSTem:REMote command
to place the multimeter in the remote mode. Sending or receiving data
over the RS-232 interface when not configured for remote operation can
cause unpredictable results.
And I think we are experiencing unpredictable results.
i don't know if you can change the command into a query by using the *OPC? command, but using that could solve it - or we could run into the same issue because of the caveat mentioned above. Maybe you have to put a manual wait in between the remote command and the write command.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

ODI Error: java.sql.SQLException: statement is not in batch mode

Greetings Gurus!
Would anybody know why changing a SQL view from
AND hapf.attribute1 LIKE '%Active%'
To
AND (hapf.attribute1 LIKE '%Active%' or hapf.attribute1 = ‘Frozen’)
cause ODI to fail?
This is the error message from ODI:
ODI-1228: Task SrcSet0 (Loading) fails on the target SUNOPSIS_ENGINE connection SUNOPSIS_MEMORY_ENGINE.
Caused By: java.sql.SQLException: statement is not in batch mode
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.Util.sqlExceptionSQL(Unknown Source)
at org.hsqldb.jdbc.JDBCPreparedStatement.executeBatch(Unknown Source)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.end(SQLCommand.java:267)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.endExecution(SQLExecutor.java:156)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.endExecution(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:113)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: org.hsqldb.HsqlException: statement is not in batch mode
at org.hsqldb.error.Error.error(Unknown Source)
at org.hsqldb.error.Error.error(Unknown Source)
... 19 more
Thank you!
Ray

Looks like the single quotes around Frozen are not ascii single quotes. They seem to be a copy paste job from MSWord.
It should be 'Frozen' and then you shouldnt have that issue
>
AND hapf.attribute1 LIKE '%Active%'
To
AND (hapf.attribute1 LIKE '%Active%' or hapf.attribute1 = ‘Frozen’)
>
Devil is in the details ;)

HT201263 Hi, my iPhone 5s was disabled because i forgot my passcode. I was relying to 3 finger prints that I was saving before. I didn't know that passcode is required when the phone restarted. So I follow every single steps to recover

Hi, my iPhone 5s was disabled because i forgot my passcode. I was relying to 3 finger prints that I was saving before. I didn't know that passcode is required when the phone restarted. So I follow every single steps to recover my iPhone using i tunes.
Suddenly an iTunes pop up a message "that I must respond to iTunes on my phone, so that the computer could have access to the phone".
HOW COULD I RESPOND ON MY PHONE WHEN I WAS DISABLED ALREADY?
IS THERE ANY BUTTON TO BE PRESS AS CODE COMBINATION THAT STANDS AS MY RESPOND TO ITUNES?
<Edited by Host>

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.
For the future, this is the iPod touch forum

Single-step deployment article from July/August Oracle Magazine Question

Hi,
As I worked through the article "Single-Step Deployment" on Oracle magazine July/August Issue,
I ran into a problem on substep 9 of Step 3 to
change the option of P2_MANAGER_ID with LOV.
The error I got is
LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query.
Did anyone encounter same problem?
Any suggestion to deal with this error?
Thanks for any advice.
YY

Hi,
Have you given your column names aliases?
Cheers,
Mike

ODI 11g (11.1.1) error -- statement is not in batch mode

I am getting this ODI error:
ODI-1217: Session SOME_NAME (1225001) fails with return code -1256.
ODI-1226: Step SOME_NAME fails after 1 attempt(s).
ODI-1240: Flow SOME_NAME fails while performing a Loading operation. This flow loads target table SOME_NAME.
ODI-1228: Task SrcSet0 (Loading) fails on the target SUNOPSIS_ENGINE connection SUNOPSIS_MEMORY_ENGINE.
Caused By: java.sql.SQLException: statement is not in batch mode
It most often occurs when my dataset has a number of records that is divisible by 10
Any ideas on how to resolve this annoying and reoccurring error???
Thank you for your help
....

It seems you are hitting on an ODI bug for which patch is available. Please refer to Note ID 1530553.1 on support.oracle.com
"java.sql.SQLException: statement is not in batch mode' Signalled When Executing An ODI 11g Scenario Populating An XML File After Upgrade From 10g [ID 1530553.1]"

Facing issues in single step processing

We are using single step processing, But facing issues while running GenData only.
We get the desired output if we run GenData and GenPrint.
And our Input file is XML
Below is our AFGJOB.JDT and FSIUSER.INI(what we are using)
AFGJOB
/* This base (this implementation) uses these rules. */
<Base Rules>
;RULStandardJobProc;1;Always the first job level rule;
;JobInit1;1;;
;BuildMasterFormList;1;4;
/*;InitSetRecipCache;5;used to set the cache the system will use to store recipient information in memory;*/
;InitPrint;;;required to execute gendata/genprint into single step
;CreateGlbVar;1;TblLstH,PVOID;
;LoadTblFiles;1;;
/* Every form set in this base uses these rules. */
<Base Form Set Rules>
;NoGenTrnTransactionProc;2;required to combin gentrn/gendata into single step;
;UseXMLExtract;2;;
/*;SetOutputFromExtrFile;2;!/global/lm/com,COM,128,PDFNAME;*/
;ResetOvFlw;2;;
/*;IfRecipUsed;2;BATCH1=Client;*/
/*;IfRecipUsed;2;BATCH2=Office;*/
;BuildFormList;2;;
;LoadRcpTbl;2;;
;RunSetRcpTbl;2;;
/*;WriteRCBFiles;;;*/
;PrintFormset;;;
;WriteOutput;;;
;WriteNAFile;;;
/*;BatchByPageCount;;;*/
/*;CreateRecordList;;;*/
/*;WriteRCBWithPageCount;;;*/
/*;BatchingByPageCountINI;;;*/
;PageBatchStage1InitTerm;;;
;PaginateAndPropagate;;
;ProcessQueue;;PostPaginationQueue;
;BatchingByRecipINI;;;
/* Every image in this base uses these rules. */
<Base Image Rules>
;RULStandardImageProc;3;Always the first image level rule;
;InsNAHdr;3;;
/* Every field in this base uses these rules. */
<Base Field Rules>
;StandardFieldProc;;Always the first field level rule;
FSIUSER.INI
< BATCH1 >
Printer = Printer1
< BATCH2 >
Printer = Printer2
<BatchingByRecip>
DefaultBatch = BATCH1
Batch_Recip_Def = true;"BATCH1";Client
Batch_Recip_Def = true;"BATCH2";Office
< GenData >
ClearMsgFile = Yes
< CONFIG:Computer >
ARCPath = Arc\
BaseDef = Computer
BDFFile = COMPUTER_DEV
BDFLib = BDFLib\
CARPATH = Arc\
DalFile = COMPUTER_DEV
DDTFile = COMPUTER_DEV
Deflib = DEFLIB\
DictionaryFile = XDB.DBF
EDLLIB = EDLLIB\
FieldBaseFile = FDB.DBF
FontLib = DEFLIB\
FORFile = COMPUTER_DEV
FORLib = FORLib\
FormDef = FORM.DAT
FormFile = COMPUTER_DEV
FormLib = FORMS\
FormsetTrigger = SETRCPTB.DAT
GRPFile = COMPUTER_DEV
GRPLib = GRPLib\
HELPLIB = HELP\
LBYLIB = DEFLIB\
LogoFile = COMPUTER_DEV
TABLELIB = TABLE\
WIPPATH = Wip\
XDDFile = COMPUTER_DEV
XRFFILE = rel113sm
< DALLibraries >
CompileWhenLoaded = N
< DBHandler:D2EA8199 >
Class = ODBC
CreateIndex = No
CreateTable = No
Debug = No
PassWd = ~ENCRYPTED 1hRFNZEw5ahYdlqi0LMu83Wa0
Server = DocumakerDSN
SubClass = MYSQL
UserID = documaker
< DBTable:COMPUTER_DEV >
DBHandler = D2EA8199
< DBTable:COMPUTER_DEV_USER >
DBHandler = D2EA8199
DefaultTag = UNIQUEIDTAG
UniqueIDTag = UNIQUEIDTAG
UniqueTag = IDTAG
< DBTable:COMPUTER_DEVC >
DBHandler = D2EA8199
UniqueTag = CATALOGID
< DBTable:COMPUTER_DEVD >
DBHandler = D2EA8199
DFD = DEFLIB\carfileblob.DFD
UniqueTag = ARCKEY+SEQ_NUM
< DBTable:COMPUTER_DEVL >
DBHandler = D2EA8199
UniqueTag = DATE+TIME
< Environment >
DO_LOGON = Yes
FSISYSINI = fsisys.ini
< Key1Table >
COM = COM
< Key2Table >
BU = LOB
< Library:COMPUTER_DEV >
CATALOG = COMPUTER_DEVC
DBTable = COMPUTER_DEVD
LBYLogFile = COMPUTER_DEVL
USERFile = COMPUTER_DEV_USER
< LibraryManager >
Class = GA;Georgia resource
Class = TX;Texas resource
Class = MD;Maryland resource
DefaultPromoteSelectedOn = No
LBYLogFile = DEFLIB\lbylog.bdf
Library = COMPUTER_DEV
Mode = DEV;Development
Mode = TEST;Test
Mode = PROD;Production
Project = P001;Project 001
Project = P002;Project 002
Project = P003;Project 003
PromoteReqClass = No
PromoteReqDesc = No
PromoteReqMode = No
PromoteReqProject = No
PromoteReqStat = No
Status = TEST;Needs to be tested
Status = FAILED;Failed testing
Status = PASSED;Passed testing
Status = PROMOTED;Has been promoted
< MasterResource >
BaseDef = <Config:Computer> BaseDef =
BDFFile = <Config:Computer> BDFFile =
BDFLib = <Config:Computer> BDFLib =
CompLib = <Config:Computer> CompLib =
DalFile = <Config:Computer> DalFile =
DDTFile = <Config:Computer> DDTFile =
DDTLib = <Config:Computer> DDTLib =
Deflib = <Config:Computer> Deflib =
DictionaryFile = <Config:Computer> DictionaryFile =
EDLLIB = <Config:Computer> EDLLIB =
FieldBaseFile = <Config:Computer> FieldBaseFile =
FNTFILE = <Config:Computer> FNTFILE =
FontLib = <Config:Computer> FontLib =
FORFile = <Config:Computer> FORFile =
FORLib = <Config:Computer> FORLib =
Form7x = <Config:Computer> Form7x =
FormDef = <Config:Computer> FormDef =
FormFile = <Config:Computer> FormFile =
FormLib = <Config:Computer> FormLib =
FormsetTrigger = <Config:Computer> FormsetTrigger =
GRPFile = <Config:Computer> GRPFile =
GRPLib = <Config:Computer> GRPLib =
HELPLIB = <Config:Computer> HELPLIB =
LBYLIB = <Config:Computer> LBYLIB =
LbyScriptLib = <Config:Computer> LbyScriptLib =
LogoFile = <Config:Computer> LogoFile =
LogoLib = <Config:Computer> LogoLib =
TABLELIB = <Config:Computer> TABLELIB =
TablePath = <MASTERRESOURCE> TABLELIB =
XDDFile = <Config:Computer> XDDFile =
XRFFILE = <Config:Computer> XRFFILE =
< ODBC_FileConvert >
COMPUTER_DEV = COMPUTER_DEV
COMPUTER_DEV_USER = COMPUTER_DEV_USER
COMPUTER_DEVC = COMPUTER_DEV_LBYC
COMPUTER_DEVD = COMPUTER_DEV_LBYD
COMPUTER_DEVL = COMPUTER_DEV_LBYL
< PRINT_BATCHES >
BATCH1 = C:\FAP\DLL\Computer\DATA\Client.bch
BATCH2 = C:\FAP\DLL\Computer\DATA\Office.bch
< Printer >
EnableBatchBanner = No
EnableTransBanner = No
< Printers >
PrtType = PDF
< Printer1 >
Port = C:\FAP\DLL\Computer\DATA\Client.pdf
PrtType = PDF
< Printer2 >
Port = C:\FAP\DLL\Computer\DATA\Office.pdf
PrtType = PDF
< PrinterInfo >
Printer = Printer1
Printer = Printer2
< PrintFormset >
LogFile = C:\FAP\DLL\Computer\DATA\mf.log
LogFileType = XML
MultiFilePrint = Yes
< Print >
RCBDfdField =
CallbackFunc = MultiFilePrint
MultiFileLog = C:\FAP\DLL\Computer\DATA\MFP.LOG
< Recip_Names >
Client = 001,Client COPY
Office = 002,Office COPY\
< PrtType:EPT >
Class = Unknown
KeepFile = Yes
Message = This is a testing message sent automatically from Oracle Documaker.Attached the generated document.
MessageFile = C:\FAP\DLL\Computer\INPUT\ArumugamFormat.mhtml
PrtType = PDF
RecipFunc = CUSSetMailRecipGVM
Recipient = [email protected];
RecipMod = CSTW32
Subject = Oracle Documaker Auto Email Test by Cognizant
< RECIP_MAIL >
client = [email protected];
office = [email protected];
< Userinfo >
File = COMPUTER_DEV_USER
< PrtType:PDF >
BookMark = No
Class = PDF
DownloadFonts = Y
Module = PDFW32
PageNumbers = Yes
PrintFunc = PDFPrint
PrintViewOnly = Yes
SendColor = Y
SendOverlays = N
Regards,
Raja S

Hi,
We did this above steps.
Below is our PDFNAME.dal
file_name = getdata("!/global/detail/name 1,99");
file_name= file_name & ".pdf"
return (file_name);
Below is our FSIUSER.INI
< BATCH1 >
Printer = Printer1
< BATCH2 >
Printer = Printer2
< BatchingByRecip >
Batch_Recip_Def = true;"BATCH1";Client
Batch_Recip_Def = true;"BATCH2";Office
DefaultBatch = BATCH1
< CONFIG:Computer >
ARCPath = Arc\
BaseDef = Computer
BDFFile = COMPUTER_DEV
BDFLib = BDFLib\
CARPATH = Arc\
DalFile = COMPUTER_DEV
DDTFile = COMPUTER_DEV
Deflib = DEFLIB\
DictionaryFile = XDB.DBF
EDLLIB = EDLLIB\
FieldBaseFile = FDB.DBF
FontLib = DEFLIB\
FORFile = COMPUTER_DEV
FORLib = FORLib\
FormDef = FORM.DAT
FormFile = COMPUTER_DEV
FormLib = FORMS\
FormsetTrigger = SETRCPTB.DAT
GRPFile = COMPUTER_DEV
GRPLib = GRPLib\
HELPLIB = HELP\
LBYLIB = DEFLIB\
LogoFile = COMPUTER_DEV
TABLELIB = TABLE\
WIPPATH = Wip\
XDDFile = COMPUTER_DEV
XRFFILE = rel113sm
< DALLibraries >
CompileWhenLoaded = N
< DBHandler:D2EA8199 >
Class = ODBC
CreateIndex = No
CreateTable = No
Debug = No
PassWd = ~ENCRYPTED 1hRFNZEw5ahYdlqi0LMu83Wa0
Server = DocumakerDSN
SubClass = MYSQL
UserID = documaker
< DBTable:COMPUTER_DEV >
DBHandler = D2EA8199
< DBTable:COMPUTER_DEV_USER >
DBHandler = D2EA8199
DefaultTag = UNIQUEIDTAG
UniqueIDTag = UNIQUEIDTAG
UniqueTag = IDTAG
< DBTable:COMPUTER_DEVC >
DBHandler = D2EA8199
UniqueTag = CATALOGID
< DBTable:COMPUTER_DEVD >
DBHandler = D2EA8199
DFD = DEFLIB\carfileblob.DFD
UniqueTag = ARCKEY+SEQ_NUM
< DBTable:COMPUTER_DEVL >
DBHandler = D2EA8199
UniqueTag = DATE+TIME
< Environment >
DO_LOGON = Yes
FSISYSINI = fsisys.ini
< GenData >
ClearMsgFile = Yes
< Key1Table >
COM = COM
< Key2Table >
BU = LOB
< Library:COMPUTER_DEV >
CATALOG = COMPUTER_DEVC
DBTable = COMPUTER_DEVD
LBYLogFile = COMPUTER_DEVL
USERFile = COMPUTER_DEV_USER
< LibraryManager >
Class = GA;Georgia resource
Class = TX;Texas resource
Class = MD;Maryland resource
DefaultPromoteSelectedOn = No
LBYLogFile = DEFLIB\lbylog.bdf
Library = COMPUTER_DEV
Mode = DEV;Development
Mode = TEST;Test
Mode = PROD;Production
Project = P001;Project 001
Project = P002;Project 002
Project = P003;Project 003
PromoteReqClass = No
PromoteReqDesc = No
PromoteReqMode = No
PromoteReqProject = No
PromoteReqStat = No
Status = TEST;Needs to be tested
Status = FAILED;Failed testing
Status = PASSED;Passed testing
Status = PROMOTED;Has been promoted
< MasterResource >
BaseDef = <Config:Computer> BaseDef =
BDFFile = <Config:Computer> BDFFile =
BDFLib = <Config:Computer> BDFLib =
CompLib = <Config:Computer> CompLib =
DalFile = <Config:Computer> DalFile =
DDTFile = <Config:Computer> DDTFile =
DDTLib = <Config:Computer> DDTLib =
Deflib = <Config:Computer> Deflib =
DictionaryFile = <Config:Computer> DictionaryFile =
EDLLIB = <Config:Computer> EDLLIB =
FieldBaseFile = <Config:Computer> FieldBaseFile =
FNTFILE = <Config:Computer> FNTFILE =
FontLib = <Config:Computer> FontLib =
FORFile = <Config:Computer> FORFile =
FORLib = <Config:Computer> FORLib =
Form7x = <Config:Computer> Form7x =
FormDef = <Config:Computer> FormDef =
FormFile = <Config:Computer> FormFile =
FormLib = <Config:Computer> FormLib =
FormsetTrigger = <Config:Computer> FormsetTrigger =
GRPFile = <Config:Computer> GRPFile =
GRPLib = <Config:Computer> GRPLib =
HELPLIB = <Config:Computer> HELPLIB =
LBYLIB = <Config:Computer> LBYLIB =
LbyScriptLib = <Config:Computer> LbyScriptLib =
LogoFile = <Config:Computer> LogoFile =
LogoLib = <Config:Computer> LogoLib =
TABLELIB = <Config:Computer> TABLELIB =
TablePath = <MASTERRESOURCE> TABLELIB =
XDDFile = <Config:Computer> XDDFile =
XRFFILE = <Config:Computer> XRFFILE =
< ODBC_FileConvert >
COMPUTER_DEV = COMPUTER_DEV
COMPUTER_DEV_USER = COMPUTER_DEV_USER
COMPUTER_DEVC = COMPUTER_DEV_LBYC
COMPUTER_DEVD = COMPUTER_DEV_LBYD
COMPUTER_DEVL = COMPUTER_DEV_LBYL
< PRINT_BATCHES >
BATCH1 = C:\FAP\DLL\Computer\DATA\Client.bch
BATCH2 = C:\FAP\DLL\Computer\DATA\Office.bch
< Printer >
EnableBatchBanner = No
EnableTransBanner = No
< Printer1 >
Port = C:\FAP\DLL\Computer\DATA\~DALRUN PDFNAME
PrtType = PDF
< Printer2 >
Port = C:\FAP\DLL\Computer\DATA\Office.pdf
PrtType = PDF
< PrinterInfo >
Printer = Printer1
Printer = Printer2
< Printers >
PrtType = PDF
< PrintFormset >
LogFile = C:\FAP\DLL\Computer\DATA\LOG.LOG
LogFileType = XML
MultiFilePrint = Yes
RCBDfdField =
< PrtType:EPT >
KeepFile = Yes
Message = This is a testing message sent automatically from Oracle Documaker.Attached the generated document.
MessageFile = C:\FAP\DLL\Computer\INPUT\ArumugamFormat.mhtml
PageNumbers = No
PrintViewOnly = No
PrtType = PDF
RecipFunc = CUSSetMailRecip
RecipMod = CUSW32
Subject = Oracle Documaker Auto Email Test by Cognizant
< PrtType:PDF >
     Device = C:\FAP\DLL\Computer\DATA\TEST.PDF
     Bookmark = Yes,Page
     DownloadFonts = No,Enabled
     Module = PDFW32
     PageNumbers = Yes
     PrintFunc = PDFPrint
     SendOverlays = No,Enabled
     SendColor = Yes,Enabled
     Class = PDF
     DisplayMode = UseOutlines
     PaperSize = 0
     Linearize = Yes
     SubsetAllEmbeddedFonts = Yes
     ForceColorBitmaps= No
     FontCompression = 2
< RECIP_MAIL >
Client = ~DALRUN pass1.dal;
Office = [email protected];
< Userinfo >
File = COMPUTER_DEV_USER
<PDF_Encryption>
KeyLength = 40
OwnerKey = c07f9e259f8307d71dd5f903dbe9c9edde208b9a36d973588b738bff7f304b08
UserKey = ~DALRUN pass.dal
Still we are getting the file name with *088hMknUyYSFoquAWsxDxwTNtpgIy7Bhy-1p3_UCFVqXW.pdf(like)*
Regards,
Balaji R

State Diagram inside For Loop

I created a fairly involved for-loop with a flat sequence inside of it. The sequence had about four events that occured, and since it was kind of ugly, I thought I'd try the State Diagram Toolkit to replace the majority of the code. When I selected state diagram from the pallete, I was outside my for-loop. I drew up the various states/transitions, then realized that all this code needed to be inside the for-loop, but LV won't let me place state diagram-generated code inside the for-loop. I select everything related to the state diagram, but when I drag into the for-loop, only the comments come inside. I even tried generating a new for-loop and placing the state code inside. No luck. Any thoughts?

"Any thoughts?"
Yes but not any that will help.
1) Just modify your SD so that the exit loops back to the start while there are still things to do. Forget the outer For loop.
2) THe observations you reported are correct. When I first discovered these limitiations I said "That sucks!". Since then I have learned a bit and have grown to love the SDE.
The SDE is JUST (note: "just" is a four letter word around here ) a LV application that ofers a very limited GUI consisting of a picture control that then scripts (see LAVA Scripting Forum for info on scripting) your SD for you. SCripting LV code is no easy task. My experiments with scripting has shown that I have to keep a database of the contents of the LV diagram my code is developing to keep track of what is where. Well it turns out that the structure of a LV diagram is a lot like the structure of a FP in that you start with a "root" object either the FP or the BD. THe BD then has structures on it, like seq's loops etc with unlited nesting possible.
Now the SD created by the SDE is really just a fancy while loop with an case structure and code to support the driving enum. In order for you to be able to edit the SD the SDE needs to know what is htere already so it can show the diagram. It "KNOWS" by looking at its internal DB (I believe is stored inside of VI along with the enum.ctl) of the SD. To keep the DB updated, the SDE must be used to manipulate the SD.
Stop rambling and guessing and get to the point!
Moving the SD is just not supported by the SDE so it can not be done. To do so would require the SDE be able to "look" at the diagram, and repeat all of its work in the new location in the diagram.
BTW: Thank you for trying out and asking about the SDE. the more talking we do on this subject, the sooner the SDE will be updated.
My SDE wishlist (partial)
Add comments to diagram from SDE screen.
Add data structures to SD (shift registers) from SDE screen.
Add "un-do".
Select multiple objects on SDE screen and move or allign.
Select multiple objects on SDE screen and do "create sub-State-Diagram".
Allow watching more than one SDE in execution highlighting at the same time.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Combining multiple WMI Queries for Single Step in Task Sequence?

Hi there,
since i couldn't find an answer on google i try to find the information here:
i would like to use a multiple wmi query in a single step in task sequence.
hat means i want to query fist if the Computer is a Laptop or not and then if yes, if it is from HP Manufacturer.
To find out if Machine is a Laptop i use the following wmi query:
Select * from Win32_Battery WHERE (Batterystatus <> 0)
To find out if the Machine is from Manufacturer HP i use the following wmi query:
Select * from Win32_ComputerSystem WHERE Manufacturer LIKE "%HP%"
my question: is it possible to combine those 2 queries?
Like IF this is a Laptop AND IF it comes from HP, then install this type of software package?
Thanks for your answers!

unfortunely this did not work.
i try to install specific software for all HP Laptops:
but this software won't get installed on any HP Laptop. Message according to the logfile
"The task sequence execution engine skipped an action because the condition was evaluated to be false"
If i remove one of the WMI-Queries Installation works successfully.
Can anyone point me what i might do wrong here?

State diagram: how to start??

hi, i'm kinda new to UML diagramming and i hope you can help me in this...
i have already drawn the use case for my project scenario, a class diagram, sequence/collaboration, activity diagrams.
my problem is how do i start with a state diagram...i know it's about describing one (mebe more but usually one) object's behaviour throughout its lifetime, but how do i describe that in the diagram? do i need an object diagram for this (i didn't draw this diagram because i don't see any reason to yet)?
can u guys teach me how to draw step-by-step the state diagram plz? thx....
gildan2020

yes, activity diagrams and state diagrams are related.
While activity diagrams focus on the process.
I normally do a state diagram and then do an activity diagram for the tricky transitions, or processes during a state. Therefor I identify the necessary activity diagrams by looking at my state diagram, but I guess it works the other way round as well. Very often I end up having one part of the behaviour modeled as activity diagram and one part as state diagram
I find state diagram helpfull if an object has a certain behaviour at one point in time and a different behaviour at another time. Screenflow of a webapplication is one of my favorite examples. Each screen represents a state. Each link a transition. Even non technical users understand this very well.
If you want to display such a behaviour in an activity diagram you end up with tons of decissions, while a state diagram shows the possibilities very visual.
And no you don't have to have an object diagram before that. In some cases you will want to create one in the next step in order to clarify how an object 'looks like' when it is in a certain state.
regards
Spieler

Get single step or sequence

Hi,
I am using Teststand 2.0.1 and LabView 6.1.
I would like to read from the code if the test is running a sequence or if just a single step is running.
In the old Test Executive you could read a variable called get_gtx_state, is there a similare variable in Teststand ?
Thank you in advance
//Johan
Best Regards
Johan

Johan -
I assume that you want to know whether the execution is running normally or in an interactive execution?
Execution.InInteractiveMode tells you whether the execution is running interactively. SequenceContext.InInteractiveMode tells you whether the current context is the root context of the interactive execution. SequenceContext.IsInteractiveStep tells you whether the specified step is a selected step in the interactive execution.
Scott Richardson (NI)
Scott Richardson
National Instruments

How To Send Multiple Spool Lists from a Single Step in SM37

We have converted all of our output reports to ALV and now instead of one big spool that contains all the reports generated in a single step we now have multiple spools. We run the program as a Batch Job in SM37 and have created an entry in the SPOOL LIST RECIPIENT for the job. The problem is that it only sends one of our lists. Is there a way to make it send all of the ists?

You need to write areport program with fm 'RSPO_RETURN_ABAP_SPOOLJOB' and collect all spools and send it and make this as precedent job after your ALV spool jobs
a®

Single step workflow with multiple approvers (without using a group)

Hi,
is it possible to have a single step workflow with multiple approvers without using a group? This is for a contract document.
i want to add a number of users based on particular logic. The approvers are random and do not belong to any particular group.
DO let me know if it is possible or if any of you have done that.
thanks in advance.
regards,
rubio

Hi Rubio,
I believe the behavior would be, if individual users are added as approvers then the system would require each approver to approve the document. However, if you use the user group, you could set the role so that it would be either ALL or ANY.
Regards,
Vikram

How to delete multiple data domains with single step ?

how to delete multiple data domains with single step ?

You can go to your Endeca-Server domain home e.g.($WEBLOGIC-HOME$/user_projects/domains/endeca_server_domain/EndecaServer/bin)
run
[HOST]$ ./endeca-cmd.sh list-dd
default is enabled.
GettingStarted is enabled.
endeca is enabled.
BikeStoreTest is enabled.
create a new file from the output just with the domains that you want to delete and then create a loop
[HOST]$ vi delete-dd.list
default
GettingStarted
endeca
BikeStoreTest
[HOST]$ for i in $(cat delete-dd.list); do; ./endeca-cmd.sh delete-dd $i; done
Remember that this can not be undone, unless you have a backup.

State Diagram "Single Step" execution mode

Similar Messages

Maybe you are looking for