Station name reverting on logout

hello,
this is not all that uncommon, but i haven't seen a solution.
i have a computer, i need to change its name. i do this via sharing prefs, no problem. as soon as i log out it reverts back to the old station name.
i've tried this as root, user, admin, done it off the network and on, repaired permissions, ran auto on applejack, this happened on 10.5.4, and updating it to 10.5.6 didn't help. i've also tried it via ARD scutil command (known not to work, but just to test) with no one logged in.
here's the log snip to see it in action. i want it pla-sales14, and then i log out and it reverts.
-- this is me changing it
Jan 30 09:14:37 dhcp137 mDNSResponder[17]: User updated Computer Name from pm08 to pla-sales14
Jan 30 09:14:37 dhcp137 mDNSResponder[17]: ssh.tcp. service renamed from "pm08" to "pla-sales14"
Jan 30 09:14:37 dhcp137 mDNSResponder[17]: sftp-ssh.tcp. service renamed from "pm08" to "pla-sales14"
Jan 30 09:14:37 dhcp137 mDNSResponder[17]: rfb.tcp. service renamed from "pm08" to "pla-sales14"
Jan 30 09:14:37 dhcp137 mDNSResponder[17]: net-assistant.udp. service renamed from "pm08" to "pla-sales14"
-- me logging out
Jan 30 09:14:52 dhcp137 mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[17]: stopping
-- this is where i log out, and mdnsresponder gets busy during login screen
Jan 30 09:15:10 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[17]: starting
Jan 30 09:15:25 dhcp137 mDNSResponder[17]: User updated Computer Name from pla-sales14 to pm08
Jan 30 09:15:25 dhcp137 mDNSResponder[17]: net-assistant.udp. service renamed from "pla-sales14" to "pm08"
Jan 30 09:15:25 dhcp137 mDNSResponder[17]: ssh.tcp. service renamed from "pla-sales14" to "pm08"
Jan 30 09:15:25 dhcp137 mDNSResponder[17]: sftp-ssh.tcp. service renamed from "pla-sales14" to "pm08"
Jan 30 09:15:25 dhcp137 mDNSResponder[17]: rfb.tcp. service renamed from "pla-sales14" to "pm08"
any ideas?

Hi,
You have two components to this question.
The datasource in Weblogic which connect to your database.
the ADF app module which takes a connection of this datasource and uses it to connect to the database.
Both concepts use pooling.
The datasource pooling you can adjust in Weblogic.
I dont think you need to adjust these settings
The app module pooling under configuration for your app module.
The 10 you mentioned is the default value for application modules reference size.
This is the number of application modules ADF keeps ready for use in case a user needs one.
This is because application modules are rather expensive objects and creating them takes time, having 10 ready means the chance for ad-hoc creation is smaller.
if you dont like these values, change them.
-Anton

Similar Messages

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

Updated itunes, radio listing displays stream name and not station name

since updating itunes my radio listing displays stream name (stream.mp3) and not station name as previous versions did. I am using icecast and i rolled back to a previous version of itunes and it works fine. Cannot resubmit details until i can show station name, How can i fix this?

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

Why is there a red circle with a "1" next to my base station name?

why is there a red circle with a "1" next to my base station name?

Could mean a software update is avaiable. Did you click on it and see what it says?

SPA112 bug: P-Station-Name sent twice in REGISTER

Configured Station Name is published by SPA112 device in REGISTER's P-Station-Name header. See catched packed bellow (Station Name=Ustredna TEST)
REGISTER sip:10.B.C.1:5060 SIP/2.0
From: "6018" <sip:[email protected]>;tag=ce2aebb4a48624fbo0
To: "6018" <sip:[email protected]>
Authorization: Digest username="DEV-6018",realm="test.sip.L.M.cz",nonce="141c3772",
uri="sip:10.P.Q.1:5060",algorithm=MD5,response="d6a320488f37acb05ad8eef315f6e7fc"
Contact: "6018" <sip:[email protected]:5060>;expires=3600
P-Station-Name: ;mac=c4........90; sn=CCQ......LR
User-Agent: Cisco/SPA112-1.3.2(009)
P-Station-Name: Ustredna TEST ;mac=c4........90; display="Ustredna TEST"; sn=CCQ......LR
Unfortunatelly, the header is sent twice in REGISTER. The first one without Station Name, the second with Station Name. As far as I know, the behavior how to interpret multiple P-Station-Name headers in one packet is not defined. So it may confuse PBX and cause unpredictable results. I assume it's bug, not intentional feature.
It would be nice if such bug will be patched ...
Note, the catched packet has been sent from device with unreleased firmware 1.3.2(009) but the same behavior has been observer on 1.3.1.

This has been entered as a bug, ID is CSCuf90879 and will be addressed in a future release. Thanks.

Renaming radio station: name keeps changing back

If I select a radio station, right click "get info" and change the name on the second tab, the name of the radio station successfully changes. However, much to my annoyance, when I double-click the station, the name changes back to the name broadcasted.
Can I prevent this behavior?
(ITunes 7, Windows XP)

Are you saying that this is another thing that has
stopped working in V7?
Well, dunno. I heard so many people say they like itunes so I decided to try it. In other words, I never tried V6 I just downloaded the newest version.
Since this is not the only issue I've experienced with itunes thus far, I think I will de-install, go back to winamp or whatever and stay away from apple apps for just a little while longer again.
BTW: Thanks for the post polydorus!

File name reverts back to original file name from camera

In iPhoto I changed all the names of my pictures from what the camera assigned them. I can see the title on each picture. Then when I go to attach the picture to an email it reverts back to original name from the camera.
It does the same thing when I copy over to an external hard drive.
How do I get the name to change permanetly?

Sandy:
Welcome to the Apple Discussions. Another alternative would be to change your workflow. Upload to a folder on the desktop first and use a renaming application like R-Name to batch, sequentially rename your photos before importing into iPhoto. I use the international date format with a brief description of the shoot like this: 2008-06-15-Fathers Day-001. It may take a bit more effort at the beginning but saves a lot of headaches on down the line.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Computer Name Reverting to Old Name

I have a Mac Mini running Server and use it for Profile Manager, File Sharing, Time Machine, VPN, DNS, and Open Directory.
There are about 20 machines setup on this domain and I ran into an issue with a MacBook I wiped and am trying to use for a different user. I wiped the HDD and reloaded Mavericks. I can join the domain and enroll the machine for the new user just fine.
However, once enrolled, the name of the computer is changed (and grayed out) back to the name that was used for the last user.
Because I wiped it and I can change it when it's not on the domain, I know it's coming from the network / serer. But I can't figure out how to fix it.
If I take it off of the domain and delete the profiles that were loaded, I can change it back and it will stick.
If I force a change on the machine itself, logging out and back in reverts it to the old computer name.
Any ideas on how to fix this?

It seems that the server is binding to the MAC address and thus changes the name of the computer once connected to the network. So, you could change the MAC address; however, you need to be a super user to do that. Bear in mind the computer has two MAC addresses, one for the Ethernet and the other airport. Also, you would need to do it in Terminal...sudo ifconfig en0 ether 00:01:02:03:04:05 --example.

Network adaptor DNS name reverting to old

Hi guys,
We setup a OSX SL machine to test its email performance. When it was setup, the admin gave it a host name like company-mailserver.com, but we modified this and related server identity names to reflect the new email domain it would be handling, mail.diffcompany.com; and since then its running mail services and server configuration get screwed up constantly.
When it was working last week, changeip -checkhostname showed proper hostname and DNS hostname matching for mail.diffcompany.com, and the DNS name as listed in the server administrators panel (under network) showed mail.diffcompany.com for the en0 ethernet adaptor. But when I came in to work today, the machine's thinking wheel was spinning in the server admin panel, and numerous other fields that were filled in correctly and working for mail, dns, etc reverted to default blank.
I saw this before and immediately checked the ethernet adaptor DNS name, and sure enough it had reverted to company-mailserver.com. Why does this keep happening? I have noticed that other services that were originally setup were using the company-mailserver.com name, so clearly there's some sort of legacy/cache going on of the first DNS entries that I cannot seem to undo. Nonetheless I disabled all those other services so I would assume they shouldn't have any effect.
Other posts I've read suggest that once DNS records get screwey, often you're better off reinstalling the whole shebang. I'd like to avoid that at all costs, as this would not be viable in the the future, and I'd like to know what exactly is going on anyway.
Anyone have this experience? What steps did you take to fix it?

I'll assume the box is not using DHCP for its IP addressing. If the box is using DHCP for its network controllers, switch over to a static address and static-defined DNS references.
Given the fundamental nature of DNS in a modern IP network, if you're going to, um, misrepresent the configuration to the server and to DNS, then, um, Bad Things can happen if you don't correctly and entirely, um, misrepresent DNS and the configuration.
if you want to do this such that it'll be stable, then set up your own local DNS services on the box and aim the box at its own DNS and aim the DNS server at your forwarding servers, and effectively create your own little private bubble of example.net within your enveloping example.com network configuration.
[Here's a local DNS set-up|http://labs.hoffmanlabs.com/node/1436] that would likely work here. You'll have a zone for your example.net target domain for this server (its own "bubble"), and set up your forwarding or such to aim at your (other) local DNS servers, and those can then reach out to the rest of the Internet.

2008 Airport Express utility doesn't work all of a sudden, name reverted to ID, lost security, message not supported.

The Airport Express I purchased in 2008 worked fine this morning, but when I tried to use Wi-Fi with my cell phone and iMac the light was green on the AE but no signal. I unplugged AE and unplugged my modem, plugged in my modem, plugged in my AE, it turned green but no signal - that is, the name I had given it did not appear on either my iMac of cell phone. Then, out of the blue, the original ID for my AE shows up on the iMac and phone and when I selected it my Wi-Fi worked, and is working. The problem is there now is no security. I got a message that Airport Utility did not support or something like that. So then I took the old CD that came with AE (in 2008) and loaded that on my iMac so I could re-establish WPA security. It seemed to load okay but then the following message popped up, "AirPort can't be installed on this disk [my Macintosh HD]. The version of Mac OS X on this volume is not supported." Well, yes, since I'd purchased my AE I'd gone through all the cats and recently had upgraded to Mountain Lion, 10.8.5, several weeks ago. But since this morning I had done nothing new.
So, it's 12:30am, Apple Care is not open - I'm not even sure I'm still covered - so maybe some night owl out there can tell me what I need to do. I'm beginning to suspect it might have to do with my operating system upgrade, but don't understand why this problem should suddenly crop up after several weeks. Any ideas out there? Oh, and incidentally, my AE was cutting off a lot about a year ago and I took it into an Apple Store and they did something with the software in the device and the cutting off improved but still would occur at least twice a week - something I just lived with.

Then, out of the blue, the original ID for my AE shows up on the iMac and phone and when I selected it my Wi-Fi worked, and is working.
My first thought is that the AirPort Express is normally good for 4-5 years on average, so you may be getting some signals in that regard.
The AirPort Express reset itself back to factory default settings. The big question now is if you re-configure it again whether it will hold those settings. Not likely....my opinion.
The other problem that you have is that Mountain Lion operating system no longer supports the older version of the AirPort Express that you have.
Oh, and incidentally, my AE was cutting off a lot about a year ago and I took it into an Apple Store and they did something with the software in the device and the cutting off improved but still would occur at least twice a week
It's really time for a new AirPort Express, which will offer much faster reliable performance....and it will be compatible with AirPort Utility on the Mountain Lion operating system.

ITunes radio: Keep getting " Station name Radio is currently unavailable. Try again later" errors

This is on my Apple TV (Gen 3), all updated. When I play the "Nursery Rhymes" radio station, it'll play one song and then go back to the iTunes Radio screen (out of the station screen). There will be no audio but the 'speaker' icon will be under the Radio station (as if it's playing).
Attempting to play that station again always gives the same error i.e. "Nursery Rhymes Radio is currently unavailable. Try again later".
How can this be fixed? My son gets pretty upset when his station stops working ....

I'm experiencing the same issue. One of my stations fails to play on my Apple TV (Gen 2) with the same message. I tried the following without any success:
• restarting my Apple TV
• logging out of and back into my iTunes account
I *am* able to play that same station from iTunes on my MacBook Pro and send it to the Apple TV via AirPlay, but I can't get it to play straight from the Apple TV.

Renaming masters and then editing in photoshop, the name reverts back...

So, if do a batch rename on a bunch of raw files to example 1.NEF, then example 2.NEF and so on, I select apply to masters. It works fine, even if I export the masters, with the master name, it shows the new name. No problem.
However, if I right click in aperture and select edit in photoshop on one of the aforementioned masters, then the new PSD file that is created has the original name as it was from the camera! What the heck?
Am I missing something?

Let's look at what's happening in the background: (tested or managed library)
In the Pictures folder is the Aperture library.
A typical master might be in a folder year>month>date>subfolder.
On sending to Photoshop a PSD (or tiff) is created and stored with the master.
This is edited and returned.
In the Previews folder year>month>date>subfolder>subfolder is found a jpg with the original name (there are also thumbnails and faces files).
This seems to be picked up when the edited file comes back from Photoshop.
More research neeeded!

Network name reverts to "David Fahnestock's iMac" when I boot computer

My network name is "Cisco1962", but when I restart the computer, the name changes to "David Fahnestock's iMac".
I have to go back to Network each time to reset it.
David

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > AirPort > Advanced > AirPort tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

[Solved] Font settings reverts with logout

<rant>
I am really sick of font troubles!
</rant>
Ok, now with that of my chest ... I have hat similar issues couple of time before and it was always a big pain in the ass to solve those.
I am using XFCE. I also have a few KDE apps running. I also use cairo-ubuntu, freetype2-ubuntu, fontconfig-ubuntu and libxft-ubuntu.
All was fine with my fonts until upgrade on 2011/12/22.
Packages that were upgraded:
[2011-12-22 18:51] starting full system upgrade
[2011-12-22 18:54] upgraded unixodbc (2.3.0-2 -> 2.3.1-1)
[2011-12-22 18:54] upgraded apr-util (1.3.12-3 -> 1.3.12-4)
[2011-12-22 18:54] upgraded firefox (9.0-1 -> 9.0.1-1)
[2011-12-22 18:54] upgraded qt (4.7.4-3 -> 4.8.0-2)
[2011-12-22 18:54] installed gperf (3.0.4-4)
[2011-12-22 18:54] installed qtwebkit (2.2.0-3)
[2011-12-22 18:54] upgraded kdelibs (4.7.4-1 -> 4.7.4-2)
[2011-12-22 18:54] upgraded redland (1:1.0.15-1 -> 1:1.0.15-2)
[2011-12-22 18:54] upgraded libreoffice-en-US (3.4.4-3 -> 3.4.4-4)
[2011-12-22 18:55] upgraded libreoffice-common (3.4.4-3 -> 3.4.4-4)
[2011-12-22 18:55] upgraded libreoffice-calc (3.4.4-3 -> 3.4.4-4)
[2011-12-22 18:55] upgraded libreoffice-extension-pdfimport (3.4.4-3 -> 3.4.4-4)
[2011-12-22 18:55] upgraded libreoffice-impress (3.4.4-3 -> 3.4.4-4)
[2011-12-22 18:55] upgraded libreoffice-writer (3.4.4-3 -> 3.4.4-4)
[2011-12-22 18:55] upgraded luminancehdr (2.1.0-5 -> 2.1.0-6)
[2011-12-22 18:55] upgraded pyqt (4.8.6-1 -> 4.8.6-2)
[2011-12-22 18:55] upgraded python2-pyqt (4.8.6-1 -> 4.8.6-2)
[2011-12-22 18:55] upgraded redland-storage-virtuoso (1:1.0.15-1 -> 1:1.0.15-2)
[2011-12-22 18:55] upgraded wine (1.3.35-1 -> 1.3.35-3)
Since then my KDE apps had different fonts. I do regular backups of my configuration and have not found any differences that would look like suspects (I suspect QT/KDE upgrade though) apart from contents of /etc/fonts/conf.d directory.
Currently these configuration files are linked there from conf.avail:
10-antialias.conf
10-hinting.conf
10-hinting-slight.conf
10-sub-pixel-rgb.conf
11-lcd-filter-lcddefault.conf
20-fix-globaladvance.conf
20-unhint-small-dejavu-sans.conf
20-unhint-small-dejavu-sans-mono.conf
20-unhint-small-dejavu-serif.conf
20-unhint-small-vera.conf
30-metric-aliases.conf
30-urw-aliases.conf
31-cantarell.conf
40-nonlatin.conf
45-latin.conf
49-sansserif.conf
50-user.conf
51-local.conf
53-monospace-lcd-filter.conf
57-dejavu-sans.conf
57-dejavu-sans-mono.conf
57-dejavu-serif.conf
60-latin.conf
65-fonts-persian.conf
65-nonlatin.conf
69-unifont.conf
70-no-bitmaps.conf
80-delicious.conf
90-synthetic.conf
Before I had NO links there, which is suspicious. I tried to remove those links but after that all my fonts looked completely terrible.
I tried to fiddle with settings in XFCE and also KDE settings and nothing seemed to help.
Here is the difference - top = GTK, bottom = KDE. I want KDE fonts to look the same was as GTK fonts do.
Last edited by Raqua (2012-04-01 20:01:01)

For XFCE, I use my cairo-respect-fontconfig.patch. This has been mentioned many times.
Thankfully, I don't use KDE - I'd suggest to try KDE's bugzilla. Probably something even more bizarre in QT 4.8's font handling. Also see cairo patch for QT 4.8.
Edit: Arch bug.
Last edited by brebs (2011-12-27 17:02:12)

Can anyone tell me how to change the names of the networks I have set up on Airport Express

Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

Hi mkl1961,
Happy Holidays! The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.
Resetting an AirPort base station FAQ - Apple Support
http://support.apple.com/en-us/HT3728
What default settings will my AirPort base station have after a hard or factory default reset?
AirPort base stations are set to request an IP address by DHCP.
AirPort base station passwords are "public."
AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
*A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port. You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
Airport Express Setup Guide
manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
I hope this information helps ....
- Judy

Station name reverting on logout

Similar Messages

Maybe you are looking for