Statistical Forecast not saved when generated with background planning job

Hello All,
The system I am working on is SCM 5.0 Support pack 15.
When I execute the planning job in the background to generate a statistical forecast, the job completes sucessfully, I have a spool that shows the forecast profile was executed (Auto Mod 2) with the appropriate model messages and the last two messages are 'Data saved successfully' and 'No data has been changed; data must not be saved', but when I go into interactive planning to view the forecast, there is no forecast in my key figure.
My planning area has the forecast settings maintained for Statistical Forecast, Corrected History, and Ex-Post Forecast key figures. My forecast profile is looking at the History key figure and Statistical Forecast key figure. My time series has been initialized for 36 months of History and 18 months of forecast. My planning book is set to have the Statistical Forecast Key figure as output only. My activity and planning job are set to execute in the appropriate planning book (in order to see the forecast alerts I have selected) with the specific selection profiles (no navigational attributes), and the aggregation level set (no navigational attributes).
The only way for me to see a forecast is to change the Statistical key figure setting in the planning book to output/input, execute the forecast job in the background, and then go into interactive planning. Am I missing something? Any help you could provide would be greatly appreciated.
Regards,
Roxane H.

Hello Senthilrajan,
I have executed the forecast in the foreground using the same planning book as the background job and same forecast profile (Auto Model 2)with a selection from the batch run (pulled a selection from the spool list) and it generated a forecast with the same messages as my background job except for the last two lines (Data saved successfully and No data has been changed, data must not be saved) that I was able to copy back into interactive planning. I then used this selection in the background job to execute the forecast in the background and did not see a forecast in interactive planning and received the same messages as before -
Data saved successfully
No data has been changed, data must not be saved
The reason we run the forecast in this book is to allow our Demand Planners to view the forecast alerts by book and/or selection directly in interactive planning instead of having to get their from the Alert Monitor. It has worked in the past and is currently working in the same environment just with a different planning book, selections, forecast profiles, and data. It generates a forecast with no 'No data has been changed, data must not be saved' message and the forecast is written in the key figure and is viewable in interactive planning with out manipulating the key figure to be input/output (it is set to output only).
Any further assistance you can provide would be greatly appreciated.

Similar Messages

Books are not saved when created with iPhoto 09

When creating a book, everything is normal but the book is not saved in the computer. So I have to finish the project and order It. The name of the book is still listed on the left but there's no photos or text. I also have a book that seems corrupted because when i try to open the file iphoto jams and i'm not able to remove the corrupted book because the file can't be opened.
Please help me

Welcome to the Apple Discussions. Sounds like a damaged database file. Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the last three options.
Click to view full size
Also what system and iPhoto versions are you running?
Happy New Year

RoboHelp HTML v9 - Browse Sequence not appearing when generated

RoboHelp HTML v9
New project - eg not converted from previous version
Added a browse sequence as per the help documentation - I've followed the help documentation however when I get to view result of the generated WebHelp - the browse sequence is not present on the topic pages that were added to the browse sequence.
I read previous forum postings for RH8 - where reinstalling or repairing the software seemed to assist - however when I access through control panel - add/remove programs the only option in to Remove RH9.
So I thought I'd ask the question here before uninstalling.
There was also mention of a dll file that needs to be registered on the viewers pc before the browse sequence would appear and if this is the case due to the possible audience for the publish I would not be able to control that.
Any help is appriciated, thanks.

Hi
Thanks - I guess I was looking for the page icons that visualized the
sequence for the viewer.
That being said - the navigation arrows are present in my published file
however seem to hold no functionality - while on a topic that is within
the browse sequence clicking the arrows does not move through the
sequence.
I was initially looking for onscreen navigation for a series of topics -
I though browse sequence would do the trick but I think I will move to
another method.
Karen Voycey, BSc
Learning Solutions Specialist | Human Resources
10 Wellington St. E. | Toronto, ON | M5E 1L5
t. 416 366 7600 x 2451|1 800 569 1163 | cell +416 568 2551
[email protected]
Proud national insurance sponsor of the AIR MILES® Reward Program. For
more information go to www.rsagroup.ca.
RSA is a registered trade name of Royal & Sun Alliance Insurance Company
of Canada.
From:   Captiv8r <[email protected]>
To:     Karen Voycey <[email protected]>
Date:   13/07/2011 04:52 PM
Subject:        RoboHelp HTML v9 - Browse Sequence not appearing
when generated
Hi there
Your mention of: "the browse sequence is not present on the topic pages
that were added to the browse sequence" seems to imply that you are
expecting to see the sequence directly on those pages. But that usually
won't happen.
Perhaps it will help to start by viewing the link below:
http://www.robowizard.com/RoboWizard/NewProject.htm#MonthlyScry/012006.htm
Then come back with any questions you may have.
Cheers... Rick
http://www.robowizard.com/pc.gif
Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com

Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

Hi Guys,
I am facing very critical issue on down Payment request, to process with saperate Tax Value.
We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
Below is the error message:
Down pmnts with taxes are not permitted when processing with jur.code
Message no. FS206

HI Preeti,
Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
Did any one seen this case in your experiece, if yes, what is the work-around solution?.
Need your help guys!,...
Regards,
Damodar Naidu

Error FS206 Down pmnts w/ taxes not permitted when processing with jur.code

Issue: I am encountering a problem entering Taxes when applying down payments received from customers since we are using a jurisdiction code taxation procedure. This process works as desired in Europe for our firm. I found OSS 97288 which is not valid for version ECC 6.0. Please assist due to US go-live in 2 weeks.Process: Create Down Payment Request for cash in advance. Required to tax at this point. Billing document creates a noted item in the G/L (Special G/L). I apply customer's payment via transaction F-29 and receive error "FS206 Down pmnts with taxes are not permitted when processing with jur.code."
Settings: 1) Alternative Recon account for Special GL posting has The tax category on the GL account = B "Output tax - down payments managed gross." 2) Transaction OBXB specifies tax clearing account for transaction key MVA. This G/Laccount has same tax category setting (B). My settings work perfectly for Europe since they are not taxed via juridicition codes.
Thank you in advance!

Check the GL master of the alternative recon account. Ideally there should be no setting in the tax fields as there is no tax calculated on down payment but only on the final amount. Leave the tax fiel blank and do not check mark posting without tax allowed.

In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

The only difference I see between looking your site between Firefox and IE is that Firefox is slightly less tolerant of a narrower window than IE but I don't see parts
missing they may be covered up but that happens on both browsers where the picture overlays wording down left side.
I can't really tell whether you are saying Firefox or IE is missing parts, but they look the same to me. First time looked it like Firefox was missing portion but it was just dropped down for some distance text and pictures were not missing.

Firefox is not saving history even with remember history preference turned on.

Firefox is not saving history even with remember history preference turned on. I have tried reinstalling Firefox but this has not solved the issue. Any help with this is greatly appreciated.

* Make sure that you do not use [[Clear Recent History]] to clear the Browsing History.
* Make sure that the History is set to at least 1 day: Firefox > Preferences > Privacy > History: "Remember visited pages for at least"
* Make sure that you do not run Firefox in Private Browsing mode (Tools > Stop Private Browsing is grayed, see [[Private Browsing]])
* To see History and Cookie settings in Firefox > Preferences > Privacy, choose the setting "Firefox will: Use custom settings for history"
You can look at these prefs on the about:config page to make sure that you keep history.
*http://kb.mozillazine.org/browser.history_expire_days (180) (also affects saved form data)
*http://kb.mozillazine.org/browser.history_expire_days_min (90)

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 Vista Ult64

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 on Vista Ultimate 64bit.
Truetype and Opentype work fine. I have searched through all the forums here multiple times, but not found a solution. The only workaround I found was to manually put the font files in c:/ProgramFiles(x86)/CommonFiles/Adobe/Fonts.
When I put any font files in that folder, they show up in CS3 for use, but not in windows apps. I thought I would make a permanent work around by placing all of my uninstalled font files in that folder, then use suitcase to install them from there. That didn't work because EVERY font in that folder is available to CS3 and turned on. Do they get installed when you put them in there?? It didn't seem like they were installed, and windows apps didn't see them.
These are workarounds anyway. My main goal is to have suitcase work so I can organize my fonts efficiently. Extensis blames the font and CS3. I have read that there are adobe issues with other font management software as well as suitcase. Any help would be appreciated.

Got mine FIXED here is what i did:
Windows 7 64bit SP1, CS 5
Postscript fonts (comprising of *.pfb + *.pfm files) did not show up in any CS5 app, but showed OK in Word, Excel, Notepad etc.
Tried activating through Suitcase Fusion 2 and also through FontExpert 2009 - but neither of them made the fonts visible in CS5 apps
1) open Start Menu/Control Panel/Fonts
2) on the sidebar there is "Font settings" item
3) set the settings as i did
[ ] Hide fonts based on language settings
[ x ] Allow fonts to be installed using a shortcut (advanced)
FIXED mine,
now i can use Suitcase Fusion 2 to install any PFB/PFM fonts without any problems...
PLEASE IF THIS WORKED FOR YOU TOO, LEAVE A MESSAGE HERE SO OTHERS KNOW IF THIS FIX IS 100% WORKING

PS CS6: Images sometimes not saved when using Close All and instructed to save

I thought I had made a crazy mistake when this happened earlier today, but it just did it again and I was paying close attention.
I often open multiple images to make several changes, then use Close All and when it prompts "Do you want to save changes to ... before closing?" I check off the box to "Apply to all" and say Yes. This saves lots of time when adjusting several multi-hundred MB images. Imagine my surprise today when it closed an image without saving! I had to repeat about 30 minutes of work as a result.
I thought I had somehow accidentally clicked "No" to saving, so I made sure to pay close attention the next few times I used Close All to save work. It worked fine until a moment ago when it did it again.
Has anyone seen something like this? I can't find anything in searching. In all my time using this feature in PS I never once had a problem before.

Thanks for the reply.
I just upgraded to CS6 from CS5 a few days ago, and this is my first week in heavy usage.
I do have Save in Background turned on. I am saving locally. I also have auto recovery saves turned on, at 5 minute intervals (CS6 has crashed a few times on me)
Yesterday I used Close All with Save maybe 10 times, and it exhibited this behavior 2 of those times.
In the two cases, I had 3 PSDs open, each a little over 400 mb in size. It seemed to save two of the images, but left one unsaved. I noticed that instead of spending several seconds saving, it would quickly just close that image - as though it believed no changes had been made. The changes that had been made to the image were routine - add some adjustment layers, some masks etc.
I have tried to reproduce it by opening the same images, making similar changes and then repeating Close All with Save, but so far no (bad) luck. Idle speculation - could it have something to do with the frequent interval of autorecovery saves that I do? Some kind of conflict? Or is it something to do with background saves? Definitely never saw this in previous versions of PS.
As a workaround, I have made a simple action that saves an image and apply it in batch. I just can't risk losing work.

I am able to change and add bookmarks, but these changes are sometimes not saved when I restart Firefox.

Since updating to Firefox 4, changes to bookmarks are saved sometimes after restart, but not usually (maybe 25% of the time). The problem sounds exactly like what is described on the [[Bookmarks not saved]] help page, yet after making all the recommended changes, the problem persists. I have also performed the recommended actions on the [[Toolbar keeps resetting]] help page, with no luck there either.
The only other thing that I can think of that may be helpful is that I use Firefox Sync between two computers, and both seem to be having this problem.

I have some more information, in case it helps. During one Firefox session, I made about 8 changes to my bookmarks.When I restarted Firefox, the first few changes I had made were saved, but the rest were not. Additionally, the favicons that were present during my last session (that I hadn't had before that session) were reverted to the default favicon. I hope this helps!

The titles are not saved when i quit

After quiting FCPX the titles i have made are not saved for next time i open a project.
Some titles are saved sometime?

Using FCP-X 10.01, OSX 10.7, 27" iMac 2010, 12 GB memory
I am having the same problem! I am using the Lower Thirds Gradient Edge title and I do change the font from Futura to Comic Sans and change the text size. The 58 large font I change to 55 and the 37 small font I cange to 45 (in case that makes a difference). I have used this for many titles in my project and some have the problem, others do not. It happens, as you say, when you exit the program and then re-launch.
Sometimes the titles go back to the template "Name", "Description", sometimes the title stays as written but the font goes back the generic Futura, and sometimes the font changes to a different one that is close on the font list to the "Comic Sans" that I am using! I did find that if I move the text boxes so that they have any overlap then the problem happens every time. However, I have been more careful with that recently and I am still getting the problem sometimes. Doesn't happen with every title which is what makes it more puzzling.
I have now taken to exporting a project file as soon as I have completed editing (I have 16 projects in the movie I am making) so that I don't lose what I have done!
Any ideas out there?

The statistical forecast not for the current month

Hi All,
The statistical forecast is done in the monthly buckets.I would like to run the statistical forecast job at the beginning of the month but the statistical forecast value for the current month must be not changed. I've tried to fix the key figure for the current month but the new forecast is not saved at all. Do you know how to achieve it?
Best regards

Hi Guz,
You should be able to do that using the 'offset' functionality in the Forecast profile screen...
Thanks,
Subash

Art work not saved when quitting itunes

Hi there,
Whenever I quit itunes, all of the album artwork I downloaded through "Get Album Artwork" is not saved, and disappears the next time I open itunes!
What is going on?
Is it to do with the file format? does mp4 not take art? help!
Dai

Yeah the same thing happens to me. It's just gone when i open itunes the next time. It does save random artwork though.
Anyone got any ideas?

Versions not saved when using iDisk??

Right now I am unable to save a document with versions when I am saving it to my iDisk. Is this not supposed to work with iDisk?? When I save the document to my desktop I can go back and see all the versions. However when I move that same document to iDisk and open it, I am no longer able to see the different versions??? m
Is this the expected behaviour??
Thanks

As far as I know, versions only functions on documents kept locally (on the internal drive).

Version Set is not created when editing with Photoshop CS4?

Last week I was working in PSE7 and opening files into PS CS4 for editing. I open the files by clicking the Open with link and choose Photoshop. I edited several dozen photos and when I closed them from PS CS4 Version Sets were created in PSE7 like they should be. At some point that stopped happening. Now when I do as before and open the files into PS CS4, edit them, and then close them the Version Set is not being created in PSE7. I look in the folder containing the files and the file has a new modified date but it still has the same file name instead of being saved with the - edited name as before. Does anyone know why the version sets are no longer being created when editing with PS CS4? I can edit the files with the PSE7 editor and the version sets are created as they should be. Thanks!

Okay so tha there is no misunderstanding here is exactly what I'm doing. From the PSE7 Organizer I select a photo (file name Tetons & Jenny Lake 026.jpg) and click the Fix tab. I then click More Options and select Photoshop. The photo opens in into PS CS4. I make my edits click the x on the tab to close the image and I'm asked "Save changes to the Adobe Photoshop document "Tetons & Jenny Lake 026_edited-1.jpg" before closing?" I click Yes then click OK to save the image at maximum quality. I go back to the PSE 7 Organizer and there is no version set. I check the folder the original image was in and see the original file Tetons & Jenny Lake 026.jpg with a new modified date and time. I can even choose Save As from PS CS4 and it asks me if I want to overwrite Tetons & Jenny Lake 026_edited-1.jpg and I select Yes, but I get the exact same results. Thanks!

Statistical Forecast not saved when generated with background planning job

Similar Messages

Maybe you are looking for