Statistics report helpu0085

Dear all,
Ive been requested to generate a statistic report to view the most number of reports being generate and possibly further drill down by users. Is this possible and if it is, how should I go about getting such report for my boss?

There is a wealth of information of this nature in the BW statistics content. There is information about this in the online help under "BI content".
Furthermore, transaction ST03 > Expert Mode > BW statistics load provides information of this nature, but is not as rich as BW statistics.
In BW 3.x, the tables RSDDSTAT and RSDDSTATAGGRDEF are utilized as datasources for the BW statistics content.
Note that this entire area has been re-designed in BI in SAP NetWeaver 2004s; BI statistics content is much more sophisticated, and the administrator cockpit uses this content to provide advanced monitoring and analysis.
Thanks for any points you choose to assign.
Regards -
Ron Silberstein
SAP

Similar Messages

Vendor Statistics Report ALV

Hi,
I am looking for a Vendor Statistics report developed by an ABAPER which basically shows how late a PO was, If full quantity was GR etc basically a Vendor Evaluation report,
Points will be awarded any Vendor Evaluation Type report will be helpful ALV format pref
Thanks
Adeel

Hi Adeel
you can get a start from this:
EKPO , JSTAT will be you might be helpful
Get the object number... for the order...
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
SELECT txt04 FROM tj02t
INTO lv_status
WHERE istat EQ wa_status-stat
AND spras EQ 'E'.
ENDSELECT.

Gather Schema Statistics Report taking more than 13 hours to complete is it normal?

I have run Gather Schema Statistics Report at 9 pm and it completed on 11am next morning. It almost took more than 13 hours, is this behavior normal.
I have used the following parameter.
Schema name: ALL
Estimate percent:50
Backup Flag :NOBACKUP
History Mode :LASTRUN
Gather Option:GATHER
Invalidate Dependent Cursor : Y
My database size is about 250 GB.
Please reply

Gather schema stastics is erroring out when i'm using the GATHER_AUTO option with 10%.
Here is the log file
+---------------------------------------------------------------------------+
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDGSCST module: Gather Schema Statistics
+---------------------------------------------------------------------------+
Current system time is 13-AUG-2013 10:42:12
+---------------------------------------------------------------------------+
**Starts**13-AUG-2013 10:42:12
ORACLE error 20001 in FDPSTP
Cause: FDPSTP failed due to ORA-20001: SYS_NTGNSVL1S+OCZGRAAHKD9MYG== is an invalid identifier
ORA-06512: at "APPS.FND_STATS", line 774
ORA-06512: at line 1
The SQL statement being executed at the time of the error was: SE
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
In GATHER_SCHEMA_STATS , schema_name= ALL percent= 10 degree = 8 internal_flag= NOBACKUP
ORA-20001: SYS_NTGNSVL1S+OCZGRAAHKD9MYG== is an invalid identifier
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 13-AUG-2013 10:43:29
+---------------------------------------------------------------------------+
I have used the following parameters
Schema name: ALL
Estimate percent:10
Backup Flag :NOBACKUP
History Mode :LASTRUN
Gather Option:GATHER_AUTO
Invalidate Dependent Cursor : Y

ActiveSync Device Statistics report for users does not show Device Phone number

HI ,
I have trying to run a Active-sync Device Statistics report to get all the details for active Sync users, but report show only last four digit of device phone number for few users and for most of the users its blank.
Is there way if we can get Device Phone number for active sync users.
Thanks,
Pradeep Kumar

Hi,
Yes i have tried all of these transactions, these all relate to individual sales orders or production order costs.
Im looking for a report showing the costs for a range of sales order line items, exaclty like KOB1 but for sales orders. KVBI does exactly what I want but the material filed is not populated.
Is there a way to populate this field as part of the settlement?
Cheers
Phil.

What is "Default" in Usage Statistics report detail?

I am running RoboHelp Server 8 and am outputing the "Usage Statistics" report which has an option to report on Browsers and Operating Systems. In the results for both is a category called "Default" (see images below). Does anyone know what this means? If you can answer that, maybe you can also tell me what the "Unknown" operating system is? I suspect this maybe an Apple Mac user as I know one of our users has tried accessing the help through the application installed on a Mac.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Further to my previous post, I can confirm that the "Unknown" operating system is definitely NOT an Apple Macintosh user. Having run the report on another area, a seperate "Macintosh" category is displayed thus leaving me in the dark again. If anyone can shed some light on this and the "Default" category I'd be very grateful.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

SP2-0611: Error enabling STATISTICS report

Hai
I created table test2 with 20,000 records,and trying to set autotrace on in order to get statistics ,i got the below error.
SQL> SET AUTOTRACE ON
ERROR:
ORA-24315: illegal attribute type
SP2-0619: Error while connecting
SP2-0611: Error enabling STATISTICS report
Any idea about this
Regards
mohan

SP2-0619 Error while connecting
Cause: An error occurred while AUTOTRACE attempted to make a second connection to the database instance.
Action: Check that the database limit on number of active sessions has not been exceeded.

Recruiters statistics report- using APPLICANT statistics report

<b>Hi experts!,
I want to get the reports of the Personal officer ( recruiters) in Applicant Statistics report. But in the standard report I can choose only one personal officer and get the report. Could any one help me how to get the reports for all the personal officer ( for eg. 10 persons).
The standard report prg is : REPORT RPAPL005
could any one help me...
Thanks and regards,
Sunil</b>

Thx for the reply,
Prakash, but I want a report which consists of name of the recruiter and their reports on applicatios...in applicants reports I tried but I can view overall view of the report but not like a report which displays the name of the personal officer and their report.
Could you please elaborate your help and let me know the solution.
regards,
Sunil

KM Statistics Report

Hi -
Under KM /Admin Guide / Content Management / Reports, I see a Statistics Report described:
Use
You can use this report to evaluate and search the content of KM repositories using different criteria. The report searches all repositories, regardless of whether indexes exist.
You can use this report to answer the following questions:
·        How many files larger than 5 MB are located in the documents repository?
·        How many ZIP files are located in the documents repository?
·        How much memory do the files that have been created beneath /documents/Public Documents in the last 14 days need?
My question: Where can I find this report? I see it under Content Administration / KM Content, but where would I actually run it so that I can specify the settings I want to use when I run the report, e.g., "Maximum number of results"?
Thank you!
Message was edited by: Jo De Hart

Jo,
I'm glad I could help you! Would you be so kind to thank also "SDN"-way? For this just<b> mark the thread as a question</b> an rewards some points! See this link for some more information regarding the "Points Reward System": Spread the Love!
Thanks,
Robert

Garnishment Statistics report

Hello All,
Can anyone explain how to execute Garnishment Statistics report . I would like to get the employees numbers with name who have an active Garnishment . when i execute it, i just get Personnel subarea with number of employees who have an active Garnishment. I would like to know, is there a way to get into detail of employee number and name? Appreciate your help.

The Garnishment Statistics Report is programmed not to give employee details, but rather Statistics.
Check in SAP's Menu, there is an other Garnishment Report that gives details on employees and their garnishments, including the history of remittances and current debt.
The big caveat is that there is probably strict security on that report as only a few persons should be able to see all that confidential information.

Movement Statistics Report setup

I am doing the setups for Movement Statistics Report but no data is coming can any body help me.

Review Note: 400098.1 - 11i Movement Statistics Intrastat report is not generating any data
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=400098.1

BEA-473225: Aggregator rejected statistics reported by server...

I am getting occasional errors and warnings associated with the WLI-Monitoring Runtime subsystem in my WebLogic logs supporting my ALSB installation. Errors and warnings include:
BEA-473224 Aggregator did not receive statistics from...
BEA-473225 Aggregator rejected statistics reported by...
BEA-473233 Timer (checkpoint) has been triggered...
I could not find reference to these errors in any message manual. Can anyone provide additional insigt into what these messages indicate?

I am using ALSB version 2.6. Of the three errors (warnings) mentioned in my original post, the one occurring most often is BEA-473233. I see this warning just about every two hours. About once or twice a day it does seem to work and no warning message is generated. The other two messages (BEA-473224 and BEA-473225) have shown up about 12 times each in the last 2 weeks.
I did find reference to these messages in the ALSB documentation, but their description is a bit thin. The messages appear to indicate some sort of communcation issue between the managed servers, but I cannot detect any adverse impact from these messages. There is no other indication of communication issues between the managed servers in the cluster that I can see.

Resource Statistics Report of KM

Has any body ever used the Resource Statistics Report of KM ?
I have a couple of questions on the same
1. Does it work with File System Repository Manager?
2. I basically want a log report for the following operations
     a. user uploads/creates a document
     b. user deletes a document
     c. user edits locally / edits online
Is it possible to track the above operations at a user level?
I have tried various combinations in the "parameter" tab of the report but am not able to achieve what I want.
If anybody has any experience with this report, kindly share it.
Thanks in advance,
Akhilesh
Message was edited by: Akhilesh Mahto

Hi,
Second issue:
open your report> goto parameter or create new report add the location and goto parameter tab>cheact List Matching Items: . It will show the results.. I got the result.
Regards,
Kumar

Add properties to the Resource Statistics Report (Parameters)

Hello everyone!
I need to generate some reports based on predefined properties I created to classified the documents.
For example, I want to know how many documents were classified to the property Brazil, or to the property Germany...
There are some properties already defined on the Resource Statistics Report (Parameter), like create by, modified by... I wanted to know if there is any way to add my properties to the list.
thanks,
Luisa

Hi Luisa,
You can develop your own report, you can read about that in this link:
Implementing Customer Reports Using the KM Reporting API
This tutorial describes the implementation of customer reports using the Reporting API of KM
Sample for implementing the reporting API.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b30b090-0201-0010-829d-e988d093ac65
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/implementing customer reports using the km reporting api.article
Patricio.

Runtime calculation in statistics report

Hello friends,
What are all the fields used for query run time calculation and run time for the data load in BW statistics cube or in RSDDSTAT (Both)
Thanks
Srini

Hi,
this is a known issue. Please check these corrective notes:
1494404 - Using Webi query filters based on dates using "Greater than" and "Less than" does not work properly when based on SAP BEx.
1467239 - Date prompts produce incorrect result with 'Between', 'Greater than or Equal' or 'Less than or Equal' filter operators when a Webintelligence report is based on OLAP universe
1614245 - Prompts on date ranges return values outside the given range in Web Intelligence reports based on a SAP BW data source.
Regards,
H

BW statistics reports

Hi all,
Can any one tell me the standard reports taken from each of the BW statistics cubes and multiproviders.
Thanks in Advance
Ramesh

Refer
BW Statistics
Hope it helps.
-Amit

Statistics report helpu0085

Similar Messages

Maybe you are looking for