Status -- Date

Dear all,
I have a scenario that When I Changed the system status = complete then system should pick up todays date in Date Tabs (w.r.to date profile)
It means
When system status = Complete
then
The closing date = Todays date.
Pls reply
Regards
Jayesh

Hi Jayesh,
for system date to be copied in todays date, when you change the status detail.
You need to code an action Method, which would on status change will update the transaction record using
FM
CRM_ORDER_MAINTAIN followed by FM call BAPI_TRANSACTION_COMMIT.
Use structure IT_APPOINTMENT to update the date details.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Similar Messages

User status Date and time

Hi EXPERTS,
In notification when we change user status, system logs date and time in action log
I want to know in which table does user status date and time can be found.
Regards
Anil Kumar

Anil Kumar,
I'm not a t a system right now, but have a look at JEST and JCDS.
PeteA

Completion percentage - If my Status date Task finish date & applied completion percentage 100% = ? New finish date for the task?

Hi and sorry for the title but it well summarize my question.
In fact I applied a completion percentage of 25% on a task with a finish date inferior to the entered status date.
MS Project only modified the Act. work of the task but not its finish date.
Is it a normal behaviour?
Thanks a lot for help
Paul

Paul --
To answer your question, yes, what you are seeing is normal behavior. If you want Microsoft Project 2010 or 2013 to automatically adjust the Finish date based on the Status Date, you will need to do the following:
Click File > Options > Advanced.
In the Calculation Options section of the Advanced page, select the option named Move Start of Remaining Parts Before Status Date Forward to Status Date.
Click the OK button.
If you select this option and enter task progress as you described in your question, Microsoft Project will force a task split, moving the uncompleted part of the task to start immediately after the Status date. In the same Calculation Options section
of the Advanced page of the Project Options dialog, you might also want to select the option named And Move End of Completed Parts Forward to Status Date. With this option selected in addition to the one mentioned in step #2 above, Microsoft Project
will move the completed portion of the task to the Status Date so that you do not see a task split at all.
Whether you use one or both of these options would be entirely up to you, based on what you want to see in the software. Neither is perfect, but I think one or both of these would give you the automatic scheduling that you seek. Hope this helps.
Dale A. Howard [MVP]

Product Delivered Status Date should be there in Standard Search and Result screen of Service Order. Product Delivered Time should be Available in Result screen and In Result screen there should be facility to filter on basis of Time

Hi team,
Product Delivered Status Date should be there in Standard Search and Result screen of Service Order. Product Delivered Time should be Available in Result screen and In Result screen there should be facility to filter on basis of Time.
How to add this in search result screen.configuration is it possible? or any changes in development.
Compnent - BT116S_SRVO
Thanks
Kalpana

Hi Kalpana
Please reread my comment. I said to try and populate "Requested End" Date.
Make sure the date profile assigned to the transaction includes this Date Type.
If you can populate this either manually or programmatically the solution should be quite forward.
If you cannot do this, only then should you look at making any significant sort of enhancement.
Regards
Arden

What are the possible Monitor Object status data members

I have problems connecting to the object over ethernet. I need to know what the status data member text info means.

Hi,
The status datamember of the Monitor object gives the state of the "connection" you're trying to monitor. For instance, when this datamember is displayed on a panel, it shows text like: "Good," "Disconnected," and so on.
Hope this helps,
Khalid

EWA thethe session is shown in status "Data is available"

Hi,
In the EarlyWatch Alert Operations screen the session is shown in status "Data is available" (icon with two small bottles) with the description The service is ready to process session data.
Background job 'SM:EXEC SERVICES' is finished successfully. Few systems EWA report is generated and *for few systems the EWA is not generated and the status is The service is ready to process session data*
ISSUE : Few systems the session is shown in status "Data is available" (icon with two small bottles) with the description The service is ready to process session data.
As an alternative running the session manually from DSA.
Request you to help me to resolve this issue.
Regards
Reddy

Hi Reddy,
What ST-SER patch level you are?
For the background job sm:exec services, it should be scheduled via
the transaction
solman_setup->Basic configuration->Automatic Configuration
->Schedule background jobs
of course you can also manually schedule it. This job generally runs
daily at 00:30:00.
Also check:
Following notes provide also details about the EWA functionality and
troubleshooting.
976054 - Availability of EWA for Non ABAP components
1332428 - Missing data in service sessions from BI/CCDB
Thanks
Regards,
Vikram

Status Date Shows NA But Really Should Have a Designated Date

Hello all,
I receive project files on occasion from which I know have an active Status Date (SD). When I open the file, the SD will show NA, indicating a SD hadn't been designated.
I've come across this issue typically, it seems, when I open a file that originated or was saved on a 2010 version of Project (probably standard edition). I have been using primarily MSP Professional 2013 to manage my schedules. When I open the files on
a 2010 version of MSP, the SD will reflect that correct SD I should be seeing.
Is this a bug that's being looked into? A search on here did not come up with any answers to my particular question. Thanks in advance for any knowledge and help!
Jay M.

Hi Jay,
I cannot reproduce your issue. After saving a project with a SD in Project Pro 2010 SP2, I open it in MS Project Pro 2013 and the SD is still there. Which 2010 service pack are you using?
2010:
2013:
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

SAP ER Incremental Reconciliation - Current Status = Data Received

Hi,
we are using SAP ER connector for SAP HR Trusted Source Reconciliation.
The Full Reconciliation works so we switched to Incremental Reconciliation.
The OIM Job named "SAP HRMS Listener" is Enabled and Active (that means OIM is listening on the TRFC Port of SAP HR system).
Issue: when the SAP admin hires an employee on SAP HR system, OIM correctly receive the transaction (this means the communication between SAP HR and OIM works as excepted) and create a new Reconciliation Event but that event remains "open" without any error and with Current Status = Data Received.
Note: no messages into weblogic_oim.log file and no errors into oim_server1-diagnostic.log.
Regards,
Gabriele

Hi Gabriele
Check the batch size system property. Only after the number of events reaches to that number, your recon events will be processed.
Please run the scheduled job "Non Scheduled batch recon" to process the recon events immediately.
Let me know the results.
Regards
user12841694

Service order is on product deliver status ,then i want to display product delivery status date and time on result list ?

Hi Team,
service order is on product deliver status ,then i want to display product delivery status date and time on result list ?My requirement is i want to display product delivery status date and time based on delivery status we need to display the date and time .how to do it.? basically i have created the productu delivery status field in search and result through AET.
Now the fields will be available in BTADMINH.
how to set based on status delivery to get the date and time .
Thanks
Kalpana

HI Ajay,
I have added code in BT116h_srvo,attributes - LCSTATUS,method - SET_LCSTATUS.but after change status f8 ..but the value is not filled in result list..so i need to write the logic in EH_ONSAVE or some other..could you please help here..what change i need to do..
IF
<nval> = 'E0004'.
DATA : lv_date TYPE dats.
DATA : lv_time TYPE tims.
lv_date = sy-datum.
lv_time = sy-uzeit.
DATA : lr_parent TYPE REF TO cl_crm_bol_entity,
lr_adminh TYPE REF TO cl_crm_bol_entity,
lr_root TYPE REF TO cl_crm_bol_entity,
lv_process_type TYPE crmt_process_type,
lv_parent_name TYPE crmt_ext_obj_name,
lr_current TYPE REF TO cl_crm_bol_entity.
lr_current ?= current.
lr_parent ?= lr_current->get_parent( ).
CHECK lr_parent IS BOUND.
CALL METHOD lr_parent->get_parent
RECEIVING
rv_result = lr_adminh.
CHECK lr_adminh IS BOUND.
TRY.
CALL METHOD lr_adminh->set_property
EXPORTING
iv_attr_name = '/itcit/F0010'
iv_value = lv_date. "value.
CATCH cx_sy_conversion_error .
ENDTRY.
TRY.
CALL METHOD lr_adminh->set_property
EXPORTING
iv_attr_name = '/itcit/F0011'
iv_value = lv_time.
CATCH cx_sy_conversion_error .
ENDTRY.
ENDIF.
Thanks
kalpana

Access status data in the dates on operation for IW32 Tcode

Hi All,
In the Transaction IW32 for service order, immediately filling the dates (start on , finish on dates in the dates tab of operation), I want to access the status data for operation. the 2 program are different and I am not able to find in which internal table the status related entries are present. the database table for this is JSTO/JEST
Is there any FM where I can pass the object number and status name and that status on operation will get saved? so that I can call that Function module in the dates on operation enhancement spot : ES_SAPLCOBO. I have already code written in this enhancement spot for calculating the finish on date from start on date.
Thanks in advance,
Rgds,
Madhuri
Edited by: madhuri sonawane on Jun 15, 2011 12:33 PM

Hi,
964188 wrote:
It is a date
Such as
10/31/2012 11:55:03 PMThen, as Hoek says, you don't want TO_DATE. For example:
WHERE   TRUNC (start_datetime) = TRUNC (SYSDATE - 7) or the more efficient
WHERE   start_datetime >= TRUNC (SYSDATE - 7)
AND     start_datetime < TRUNC (SYSDATE - 6)Also, it doesn't look like the EXISTS sub-query is corelated to the main query. That's almost certainly a mistake.
If you're still having trouble, post your revised query, a little sample data (CREATE TABLE and INSERT statements). Point out where that query is givimg the wrong results, and explain how to get te right results.
See the forum FAQ {message:id=9360002}

Read Printer Status Data

Dear All;
I want to read the printer status data which are shown in the printer built in display (ink level, cartridge status, job status) in my PC. Can anyone help me how to do that? Is there any built in function or code that can access the printer control data?
I need to implement this for both offline and network printer.
Regards
Arefin

Hi,
Congo,That issue resolved by following process-
In solution manager use "MAI_TOOLS" transaction then "Acitvate expert mode" and select "Analysis" Tab.Under this tab there is one option "Check Directory consistency".By selecting this option then I entered "Technical scenario" T_SYS_MON and "Managed object name" as my managed object for which data was not reporting,then execute it.
There I found missing entry point configuration for my managed object.When I select reconfigure entry point then after few minutes data started to reporting.
But for the same metric data is reporting randomly. For few hours data comes and then again it becomes grey for few hours.I am observing this from last 30 hours.
Kindly suggest for this situation.
Regards,
Piyush Jain

Bring the start of the Gantt to the Status Date

Hi,
Is there a way to ensure the Gantt chart timeframe starts from the Status date?
I only found an option to show 'Entire Project' or 'Selected Tasks'.
Thanks,
Yuval

Hi Yuval,
I can't help you with the VBA, but it would certainly be needed. The 2 buttons we are refering to are tasks oriented (either all tasks, or selected tasks) but not dates oriented. Thus VBA will be required.
Here is a code sample with the current date that you can start from and adapt with the status date:
Sub GotoTodayInGantt()
EditGoTo Date:=Now
End Sub
Here is also a blog which détails the procedure to add the macro to a button in the ribbon:
http://www.wodey.de/de/EventsNewsBlog/Blog/tabid/164/EntryId/13/How-to-add-Goto-Today-Button-for-Gantt-in-Project-Professional-2010.aspx
EditGoTo Date:=Now
End Sub
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Send Status data to be taken by default in the messages defind during ME23N

Hi,
Is there any way to fix the following data defined in Communication Method tab for a message created in ME23N for Medium "External Send" option:
Send Status--
Requested Status: Return All Statusses
Send By Mail: All statusses
Kindly suggest.
Regards,
Puja

do you mean display the send statuses in ME23N?
I have not yet seen it, however it is a good idea and can probably be achieved with user exits and own screens.
The message in the PO shows green processed if it is succesfully submitted to the next system (print server/fax server/mail server) who takes care about outputting /sending the message.
if you do faxing and mailing with SAP, then you can get the statuses for SOST.

How to capture system status & date in project?

Hi all
I'm using transaction CJ20N for managing all R & D projects.
I want to make a report where I need to capture status REL & CNF of every stage with respective dates.
Can you help me to provide a procedure how to find it through tables?
For example I find process order status in table JCDS & JEST by adding letters OR followed by 4 zeros as a prefix to process order & enter in to field object number.
Please help.

Hi,
Follow the same procedure by using the object number of the WBS. It starts with "PR". You can get the object number of the WBS from PRPS table. To get the object number of the activities you can refer the table AFVC. Pass on the WBS in the AFVC table and execute it. This will list all the activitiies that fall under the WBS you entered.
As an alternative you can use the report CN41N to fetch objects with the REL and CNF status. Change the layout to include the column "Status" in the report. You need to define a status selection profile to fetch only the objects having the REL and CNF status. Refer SAP Help to understand more about this.
Regards,
Gokul

A status date in a transaction

Hello, friends,
could you please help me with the question if it is possible to add a date to the User status? The Status represents the phases of a contract, so requirement is to see since what date the phase has begun.
The similar function is realized in phases of an opportunity - there are fields "Phase" and "Phase since", but unfortunately there is no such phases in sales order or contract.
Could you please advice me what is better to do.
Thanks in advance.
Sunny.

Define Date Profile
The date profile controls which date types, durations, reference objects and date rules can be used in a specific transaction type or item category.
Depending on the date profile, you also define the characteristics for date types and durations (for example, time unit, reference object, duration, date rule) in this activity.
Characteristics for date types and durations
Reference object
You can use the reference object to control which time zone and which factory calendar the dates and durations refer to. Instead of automatically using the time zone and calendar of the user or of the system, you can set the system to use another time zone when calculating the dates, namely that of the reference object.
You can allow one or several reference objects for one date profile. You must assign one of the allowed reference objects for each date type or duration type. You cannot create any new reference objects.
Example
The end date of the contract with the reference object CUSTOMER conforms to the time zone and factory calendar of the sold-to party, and not to the time zone of the user who has created the contract.
Displaying dates
For date types and durations, you can specify in which area of the screen or on which tab page the date type or duration is displayed in the document.
Calculation sequence
You can enter a calculation item for date types. This specifies the sequence in which the system calculates the dates. For example, if you enter a 1 here for the cancellation date, the system calculates the other date types for the date profile outgoing from this date type. Choose the sequence so that dates which appear in other date rules are calculated first. (For example: Contract start date = current date, contract end date = contract start date + 12 months. The contract start date must be known, in order that the end date can be calculated).
One-time calculation of dates
You can determine that a date in a document remains the same after the first calculation and is not re-calculated with each change to the document, for example, the date type "Contract Start".
For this, select the Determine Date Only Once field in the group frame Date Rules of date types.
Requirements
You have defined date types, durations and date rules in the activity Define date types, durations and date rules.
Standard settings
SAP delivers the following date profiles:
000000000001 activity: planned / current / planned completion
000000000002 activity: planned / current
000000000003 activity: current
CIC_F2F business activity profile IC
CIC_PLN business activity profile IC (Plan)
CONT001 standard contract dates
LEAS date profile for Leasing
PURCH_CONT purchase contract
SRV_HEADER01 service transaction header
SRV_ITEM01 service transaction item
We recommend that you do not change the delivered profiles, but you copy and adapt them as necessary.
Activities
1. Enter an ID for a new date profile, and a relevant description.
2. Select the date profile, and double-click to choose the object you wish to assign to it, for example, date types.
3. For date types and durations, select the required object and choose wählen Details, in order to define the characteristics.
4. In each screen, choose the required entries with the input help (F4).
5. Assign the date profile to the required transaction type in the IMG activity.

Status -- Date

Similar Messages

Maybe you are looking for