Status in order
Hi guys,
I need your help on following issue:
I have created my own order type Z...And the problem is when I create and save billing document from an order the overall status stays opened (even if it should be closed) and billing status order-rel. stays not invoiced (even if it should be invoiced)
I would to know where are the settings to make those statuses in order closed when billing document is saved.
Thanks for your help.
Zbynek
Dear Zbynek,
in the transaction VOV7 you have Customizing for the item categiries. Here you can indicate the completion rule: for example,
A - item is completed with the first reference;
B - item is completed after full quantity has been referenced
C - item is completed after target quantity is referenced
etc.
Also, with the billing relevance in VOV7 you can control, under whioch circumstances the billing is complete.
The status of the sales order itself is calculated on the basis of the status of items.
I hope, this information will help you a little bit further.
Kind regards,
Akmal Vakhidov
Development Support SD, SAP, Walldorf/Germany
Similar Messages
-
Sales order item ontime delivery status at order level in Cube
Hi Guys,
We have a requirement, currently we have sales order item information in cube where we have some thing called OTD status
this status is based on actual GI date and requested date so we have 3 staus at each sales order item level ontime, early, late
but now the requirement is to change the order status either to ontime or late and this status should be at order level instead of
order and item level, if any one item in order is late then the whole status of order should be late and if on time or early then it
should be ontime, is there any why to achive this except adding new character in cube or creating new object in system???
or if not by just adding new character in cube like order status by remodeling and populate data with customer exit?? pls note
that we are not using 2lis_11_VAHDR we are using 2lis_11_Vaitm only.
thanks,
chandra.hi Chandra,
We had similar kind of situation. but you need to implement the logic either by remodelling or creation of new object.
What we did was as under.
- Created new DSO with just Order no and the status.
- After VAITM Delta load - by making it datamart we forwarded the data to that DSO and had the Status logic put up there so you dont need to change the existing model and you have the status at order level in other DSO.
- this DSO was than included in Multiprovider for further reporting puprose.
-This way you have very less things to manage and no need to further enhance exisiting model. This status logic may change in future and you have flexibility to do so easily in the system.
Hope this helps.
Regards
Raj -
Order Status/Recent Orders ?
I placed an order for the iPhone 6 Plus Gold 64gb of 09/24. I've received my confirmation letter and changes to account notification but when I go to look at Order Status/Recent Orders it shows my Order Number, Order Date and then under Products its blank so I click on the "If all items are not listed within your order, please click here for complete order details." option and get this response "We do not have a record of Order Number #####. Please try again later."
It's been giving me that message since last week when I placed my order (but I did get a confirmation email with the same order number on it) how long does it take for the system to have 'record' of my order number?Ok so I finally got answers via a rep on Twitter.
When you log into acct and go to 'Order Status' and then 'Recent Orders' it shows a 5 digit order number and the order date but then no info......so I was redirected to use the 10 digit order number that came in my confirmation of order email and then to select the option of 'If you don't see your order click here for additional order information' .... which is this link Order Status | Verizon Wireless you'll just need to put in your 10 digit order number that comes on your confirmation email and will need to enter the last name as entered when ordered. Hope that helps -
Hi Everybody:
I've a issue with this orders status, I need to active the Deletion flag into my Process Order, but I can't get this, cause i'm receiving this error message:
System status ORRQ is active (ORD 12000020)
Message no. BS013
Diagnosis
Object ORD 12000020 has system status ORRQ (Order record required). According to this status, transaction 'Mark for deletion' is not allowed.
I couldn't find out the settings for this status in my customizing.
Please anyone can help me about?
Thanks in advance.
Omar PereaHi Omar,
Option 1
Go to BS22
Select the id I0278 - LVMS
Change the selection option to allowed from disallowed
You can set the deletion flag.
Option 2
Change the status to ORAC from ORRQ, by using t-code COAA or COPA. Order record will be archived during this process. But you can not re-print once you done this. Again re-printing can be controlled using BS22 by making the change in the relevant business transaction.
Hope the above helps.
Regards,
Vivek -
ECC report for sales order status from order entry to Invoice (OTC rpt)
Dear All.
Looking to see if there's a standard report or transaction that we can use to review sales order line item status.
VA05 provides a good view from sales, and VL06O provides a good view from LE, and VF05 provides a good view from billing.
But there is there something that would list sales orders and show related quantity, open, delivered, billed all in one report?
Many thanks!Thank you Shiva.
That's what we were thinking as well. Just wanted to make sure we didn't miss something in case SAP provided a template or customizable program for this.
Thanks -
How to change system status of order created in IW31
Hello All,
I created a maintenance order in IW31. System status of that Order is like this,
Now i have a requirement to change the system status.
But the BAPI : BAPI_ALM_ORDER_MAINTAIN has option to change user status. Please suggest what i have to do?
Thanks in AdvanceEXIT_SAPLBSVA_001 will fulfill your requirement.
Try to change your system status inside this exit.
You will get both User status and System status. -
RUNTIME Error - User Status for Order release
HI Friends,
Pls go thru the run-time error description,which i'm getting on Order release.Pls reply,.
Runtime Errors MESSAGE_TYPE_X
Date and Time 31.03.2008 13:16:08
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_250
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_250"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_SWF_RUN_WIM_LOCAL==========CP" or "CL_SWF_RUN_WIM_LOCAL==========CM088"
"IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "SILDEV"
Network address...... "192.168.255.70"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x IA64 Level 3"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "SILDEV"
Database type..... "MSSQL"
Database name..... "DEV"
Database user ID.. "dev"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 3 2008 03:55:37"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "SQL_Server_8.00 "
Patch level. 150
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 16384
MM Used. 4889280
MM Free. 3487552
User and Transaction
Client.............. 250
User................ "PM5CHARL"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "49F6FEDCA000F177897B0017A4ABF059"
Program............. "CL_SWF_RUN_WIM_LOCAL==========CP"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "DEV"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........."C0A8FF46013847F096C00004"
Outbound Queue Name.." "
Client.............. 250
User................ "PM5CHARL"
Transaction......... " "
Call Program........."SAPLERFC"
Function Module..... "ARFC_DEST_SHIP"
Call Destination.... "NONE"
Source Server....... "SILDEV_DEV_00"
Source IP Address... "192.168.255.70"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "CL_SWF_RUN_WIM_LOCAL==========CP" -
in "IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 10
of the (Include) program "CL_SWF_RUN_WIM_LOCAL==========CM088".
Source Code Extract
Line
SourceCde
1
METHOD if_swf_run_wim_utl_internal~get_system_user .
2
DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4
TRY.
5
IF me->m_int_state-system_user IS INITIAL.
6
me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7
ENDIF.
8
re_user = me->m_int_state-system_user.
9
CATCH cx_swf_run_wim INTO l_excp.
>>>>>
MESSAGE ID l_excp->t100_msg-msgid
11
TYPE 'X'
12
NUMBER l_excp->t100_msg-msgno
13
WITH l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14
l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15
ENDTRY.
16
17
ENDMETHOD. "
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
2
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
CPIC and RFC Control
SY-MSGTY
X
SY-MSGID
SWF_RUN
SY-MSGNO
617
SY-MSGV1
WORKFLOW_LOCAL_250
SY-MSGV2
RFC_READ_DESTINATION_TYPE
SY-MSGV3
DESTINATION_NOT_EXIST
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080331
SY-UZEIT
131608
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No. Ty. Program Include Line
Name
26 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM088 10
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
25 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM00J 5
CL_SWF_UTL_MAIL=>GET_OWNER
24 METHOD CL_SWF_UTL_MAIL===============CP CL_SWF_UTL_MAIL===============CM002 37
CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
23 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0IE 38
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
22 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM021 7
CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
21 METHOD CL_SWF_RUN_WIM_STATE==========CP CL_SWF_RUN_WIM_STATE==========CM01V 12
CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
20 METHOD CL_SWF_RUN_WIM_STATE_FLOW=====CP CL_SWF_RUN_WIM_STATE_FLOW=====CM004 2
CL_SWF_RUN_WIM_STATE_FLOW=>IF_SWF_RUN_WIM_STATE~EXECUTE_STATE_TRANSITION
19 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM09A 72
CL_SWF_RUN_WIM_LOCAL=>SET_STATUS_INTERNAL
18 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM0H3 16
CL_SWF_RUN_WIM_LOCAL=>_SET_STATUS
17 METHOD CL_SWF_RUN_WIM_LOCAL==========CP CL_SWF_RUN_WIM_LOCAL==========CM04P 7
CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SET_STATUS
16 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM011 12
CL_SWF_RUN_WIM_EXECUTION_MGR=>SET_WORKITEM_STATUS_ERROR
15 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM01A 81
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXCEPTION_RESULT
14 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM00R 93
CL_SWF_RUN_WIM_EXECUTION_MGR=>HANDLE_EXECUTION_RESULT
13 METHOD CL_SWF_RUN_WIM_EXECUTION_MGR==CP CL_SWF_RUN_WIM_EXECUTION_MGR==CM008 144
CL_SWF_RUN_WIM_EXECUTION_MGR=>START_EXECUTION
12 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM016 42
CL_SWF_RUN_WORKFLOW_START=>START_WORKITEM
11 METHOD CL_SWF_RUN_WORKFLOW_START=====CP CL_SWF_RUN_WORKFLOW_START=====CM002 33
CL_SWF_RUN_WORKFLOW_START=>EXECUTE
10 FUNCTION SAPLSWW_SRV LSWW_SRVU13 135
SWW_WI_CREATE_VIA_EVENT_INTERN
9 FUNCTION SAPLSWW_SRV LSWW_SRVU11 64
SWW_WI_CREATE_VIA_EVENT
8 FORM SAPLSWW_SRV LSWW_SRVU11 1
SWW_WI_CREATE_VIA_EVENT
7 FORM SAPMSSY1 SAPMSSY1 271
XAB_RUN_DRIVER
6 FUNCTION SAPLSXAB LSXABU01 9
RFC_RUN_XAB_DRIVER
5 FUNCTION SAPLERFC LERFCU01 115
ARFC_EXECUTE
4 FUNCTION SAPLERFC LERFCU02 386
ARFC_DEST_SHIP
3 FORM SAPLERFC LERFCU02 1
ARFC_DEST_SHIP
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 26 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
RE_USER
222222222222
000000000000
000000000000
000000000000
L_EXCP
B0004000
90006000
SY-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
L_EXCP->T100_MSG-MSGID
SWF_RUN
55455542222222222222
376F25E0000000000000
00000000000000000000
00000000000000000000
SWFCO_WIM_WI_FORWARD
SWW_WI_FORWARD
555554544554542222222222222222
377F79F6F271240000000000000000
000000000000000000000000000000
000000000000000000000000000000
SY-MSGNO
617
333
617
000
000
L_EXCP->T100_MSG+40(6)
617
333
617
000
000
SY-MSGV1
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+48(100)
WORKFLOW_LOCAL_250
54544445544444533322222222222222222222222222222222
7F2B6CF7FCF31CF25000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+148(100)
RFC_READ_DESTINATION_TYPE
54455444544554445444555542222222222222222222222222
263F2514F45349E149FEF49050000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+248(100)
DESTINATION_NOT_EXIST
44554445444544554545522222222222222222222222222222
45349E149FEFEF4F5893400000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
L_EXCP->T100_MSG+348(100)
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 25 Ty. METHOD
Name CL_SWF_UTL_MAIL=>GET_OWNER
RE_OWNER
%_DUMMY$$
2222
0000
0000
0000
ME->M_OWNER
%_VIASELSCR
0
4
ME
A0005000
E0001000
L_WORKITEM
60009000
3000C000
SY-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 24 Ty. METHOD
Name CL_SWF_UTL_MAIL=>IF_SWF_UTL_MAIL~SEND
EX_SENT_TO_ALL
2
0
0
0
EX_MAIL_OBJECT
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
CL_SWF_UTL_MAIL===============CP
4455545554544443333333333333334522222222
3CF376F54CFD19CDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME
A0005000
E0001000
OBJECT_HD_CHANGE-ACNAM
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222222222222222222222222222
377F79F4930C19F6F2FD19C0000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000
OBJPARB
Table IT_758[1x570]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJPARB
Table reference: 224
TABH+ 0(20) = E06D6DEFF9060000000000000000000000000000
TABH+ 20(20) = E0000000F6020000010000003A020000FFFFFFFF
TABH+ 40(16) = 042A0200600B000010000000C1248401
store = 0xE06D6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 224 (0xE0000000)
label = 758 (0xF6020000)
fill = 1 (0x01000000)
leng = 570 (0x3A020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000046
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x80095FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 540 (0x1C020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OBJECT_HD_CHANGE-OBJDES
Workflow 405090 set to status ERROR
56766667233333327672762776777245545222222222222222
7F2B6CF70405090035404F03414530522F2000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
%_FSREG_001
OBJCONT
Table IT_760[9x510]
\CLASS=CL_SWF_UTL_MAIL\METHOD=IF_SWF_UTL_MAIL~SEND\DATA=OBJCONT
Table reference: 225
TABH+ 0(20) = 106F6DEFF9060000000000000000000000000000
TABH+ 20(20) = E1000000F802000009000000FE010000FFFFFFFF
TABH+ 40(16) = 042A0200300B000010000000C1248401
store = 0x106F6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 225 (0xE1000000)
label = 760 (0xF8020000)
fill = 9 (0x09000000)
leng = 510 (0xFE010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000045
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x402D5FEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 541 (0x1D020000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
OWNER
222222222222
000000000000
000000000000
000000000000
SENDER
222222222222
000000000000
000000000000
000000000000
SY-SUBRC
0
0000
0000
SWFCO_MAIL_ERROR_NOTIFY
0002
3333
0002
0000
0000
OBJECT_HD_CHANGE
E ERRORMESSAGEWorkflow 405090 set to status ERROR 00000000000000 F F S
4222222222245545445544456766667233333327672762776777245545222222222222222233333333333333242425
50000000000522F2D5331757F2B6CF70405090035404F03414530522F2000000000000000000000000000000060603
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_TYPE
RAW
545
217
000
000
SWFCO_OBJTYPE_BOR
BO
44
2F
00
00
No. 23 Ty. METHOD
Name CL_SWF_RUN_WIM_LOCAL=>IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL
LT_AGENTS
Table IT_752[1x28]
\CLASS=CL_SWF_RUN_WIM_LOCAL\METHOD=IF_SWF_RUN_WIM_INTERNAL~SEND_ERROR_REPAIR_MAIL\DATA=LT_AGEN
Table reference: 207
TABH+ 0(20) = 806B6DEFF9060000000000000000000000000000
TABH+ 20(20) = CF000000F0020000010000001C000000FFFFFFFF
TABH+ 40(16) = 04180100E006000010000000C1248401
store = 0x806B6DEFF9060000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 207 (0xCF000000)
label = 752 (0xF0020000)
fill = 1 (0x01000000)
leng = 28 (0x1C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000022
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xA0696DEFF9060000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 537 (0x19020000)
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SYST-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD+840(28)
WS20000014
55333333332222
73200000140000
00000000000000
00000000000000
SY-REPID
CL_SWF_RUN_WIM_LOCAL==========CP
4455545554554454444433333333334522222222
3CF376F25EF79DFCF31CDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
FUNCNAME
SWW_WI_DISPLAY_FOR_MAIL
555554544554455445544442222222
377F79F4930C19F6F2FD19C0000000
000000000000000000000000000000
000000000000000000000000000000
SWFCO_WI_REMOTE
R
5
2
0
0
PARAMETER-NAME
WI_ID
54544
79F94
00000
00000
SWFCO_CALLBACK_AGENTS
CALLBACKAGENTS
54444444454444552222222222222222
F31CC213BF175E430000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
PARAMETER-VALUE
000000405090
333333333333
000000405090
000000000000
000000000000
ME->IF_SWF_RUN_WIM_INTERNAL~M_SWW_WIHEAD-WI_ID
000000405090
333333333333
000000405090
000000000000
000000000000
PARAMETER
807020C0
7080A050
00000000
00100010
LS_MAILOBJ
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ME
60009000
3000C000
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
No. 22 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>DYN_SEND_ERROR_REPAIR_MAIL
SWFCO_WORKITEM_OBJECT
_WORKITEM
55454454422222222222222222222222
F7F2B945D00000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
No. 21 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE=>EXECUTE_STATE_TRANSITION
IM_STATE_ACTIONS
Table IT_279[30x152]
\CLASS=CL_SWF_RUN_WIM_STATE_FLOW\DATA=M_STATE_ACTIONS
Table reference: 112
TABH+ 0(20) = 90CE53EFF9060000B04D6BEFF906000000000000
TABH+ 20(20) = 70000000170100001E0000009800000090010000
TABH+ 40(16) = 049A01007004000010000000C9248001
store = 0x90CE53EFF9060000
ext1 = 0xB04D6BEFF9060000
shmId = 0 (0x00000000)
id = 112 (0x70000000)
label = 279 (0x17010000)
fill = 30 (0x1E000000)
leng = 152 (0x98000000)
loop = 400 (0x90010000)
xtyp = TYPE#000009
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF0C453EFF9060000
pgHook = 0xF0CE53EFF9060000
idxPtr = 0x50E253EFF9060000
shmTabhSet = 0x0000000000000000
id = 207 (0xCF000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 48 (0x30000000)
lineAlloc = 48 (0x30000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x204C6BEFF9060000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
SWFCO_WI_NO_DEADLINE
0000
3333
0000
0000
0000
L_OBJ
A0005000
D0002000
ME
A0005000
D0002000
ME->IF_SWF_RUN_WIM_STATE~NEW_STATUS
ERROR
455452222222
522F20000000
000000000000
000000000000
<%_L003>
ERROR
455452222222
522F20000000
000000000000
000000000000
SY-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_L004>
F
4
6
0
0
<STATE_ACTION>
FERROR 01DYN_SEND_ERROR_REPAIR_MAIL
4455452222222334545544454554555454455444422222222222222222222222222222222222
6522F200000000149EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000
<%_L002>
<%_L002>-WI_STAT
SYST-REPID
CL_SWF_RUN_WIM_STATE==========CP
4455545554554455545433333333334522222222
3CF376F25EF79DF34145DDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SWFCO_WI_STATUS_WILD_CARD
222222222222
A00000000000
000000000000
000000000000
<%_L002>-WI_TYPE
<STATE_ACTION>-METHOD
DYN_SEND_ERROR_REPAIR_MAIL
4545544454554555454455444422222222222222222222222222222222222
49EF35E4F522F2F250192FD19C00000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000
%_SPACE
2
0
0
0
LV_EXCP
F0000000
F0000000
No. 20 Ty. METHOD
Name CL_SWF_RUN_WIM_STATE_FLOW=>Hello,
Get help from your abaper on this.
Vinay -
Hello fellow SAP users
As stated in SAP note 1036919 the pick status in sales document rows is not reliable anymore becaus the sales order row can be split into serveral picklists and might have a diffrent picking status in each list.
Our customer howevers is relying on this status for reporting and legal purposes.
Has anyone encoutered this issue before? And what did you do to work around it?
Kind regards,
Andy GrootensHello,
Try it may it help you
Make a UDF and entered manually row no.
Thanks
Manvendra Singh Niranjan -
Order Status for Order Rel. Billing
Hi All,
I am trying to create an Order relevant billing doc (proforma invoice) which should update the Sales order status in the Document Flow after Billing is created. I mean the Sales should get completed after billing.
I have maintained the Item category as relevant for billing with billing relevance as D (Relevant for Proforma Inv.) but the order status is Open after creating a Proforma Invoice.
Please let me know the solution so that I can implement the same if ok. Though I am using a proforma invoice I can also use another billing doc type if this can help which gets released to accounting.
Please suggest.
Thanks
SumitHi
Infact,billing is created as per the "Billing relevance" value (order realted,delivery related etc) in the Item category of Sales document.
If the item is relevant for delivery(i.e, item category, billing relevance is delivery related),then once you deliver the order completely, then only the status of the Sales order gets completed which you can see in the document flow also.
Similarly, Delivery gets completed status when Billing document is created with reference to this Delivery.
If the item category is relevant for order related billing like in services, there is no physical delivery created. Here the subsequent process of Sales order is Billing.
So, in this case when the order is billed completely then the order will get completed status.
But,irrespective of the "Billing relevance"(order related or delivery related), creation of Proforma Invoice does not update the status of the reference document.This is controlled from copy control as I have already mentioned in my earlier post.
Proforma Invoice is a dummy invoice. -
Overall Status of order Being processed after complete PGI & Billing
Dear All,
Before writing this post i tried all possible solution available on SCN & internet.
In sales order overall status (GBSTK) is Being processed after doing complete delivery and Billing.
I tried many things changed the completion rule also run the program SDVBUK00 but the status is not updated to complete.
Created 1 sales order with 1 material without any reference then done PGI for 1 material then done billing successfully.
In table VBUK / VBUP the field GBSTK / GBSTA showing Being processed, for delivery and invoice its showing completed "C".
I checked the Incompletion Log also there is nothing pending.
Please refer screenshots and provide me solutions.
Thanks in advance.
Tarun KumarThere is no additional schedule line.
I have taken 1 quantity and it confirmed.
I change the completion rule also but no luck.
Copy control screenshot- -
ERTR status -- production order
Dear all
we have found that all the materials were issued yet the production order status still says ERTR.
How i can refreshe the ERTR stutus to be be removed from the production
order status.
If there are any prerequisites what are they?
Rgds
S PatilDear,
ERTR- Error in transfer requirements
Check production schedulign profile OPKP, Did you maintain WM in that
also check in Control cycle ,staging ind. shd be "1"
Also check In the Goto CO03 --> Logs --> for details.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Nov 18, 2008 11:38 AM -
Item User Status - Sales Order
1- The cancellation item is created with reference to an existing line item on Sales Order. How is done?
2- I would like to see the original item have its status for both delivery and billing changed to completed and have its overall status completed as long as a PO is created. I don't know how to do that...
Can you help???
ThankssHi Miquel,
For that T.code we have user exits and badi. I am providing all the userexits and badi plz gothrough that.
Transaction Code - VA02 Change Sales Order
Enhancement/ Business Add-in Description
Enhancement
V60F0001 SD Billing plan (customer enhancement) dif
V46H0001 SD Customer functions for resource-related
V45W0001 SD Service Management: Forward Contract Da
V45S0004 Effectivity type in sales order
V45S0003 MRP-relevance for incomplete configuration
V45S0001 Update sales document from configuration
V45P0001 SD customer function for cross-company cod
V45L0001 SD component supplier processing (customer
V45E0002 Data transfer in procurement elements (PRr
V45E0001 Update the purchase order from the sales o
V45A0004 Copy packing proposal
V45A0003 Collector for customer function modulpool
V45A0002 Predefine sold-to party in sales document
V45A0001 Determine alternative materials for produc
SDTRM001 Reschedule schedule lines without a new AT
Business Add-in
BADI_SD_SCH_GETWAGFZ Scheduling Agreement: Read WAGFZ from S073
BADI_SD_V46H0001 SD Customer functions for resource-related
No.of Exits: 15
No.of BADis: 2
Which one is suitable plz check it out and put breakpoint after providing the logic .
Rewrds some points.
Rgds,
P.Nag -
Hi,
In the order CO02 :
My customer need when selecting the user status Z0001 and save, the system re-edit automaticaly the production order and also the order confirmation from the customer order attached to my production order.
How can we do this?
Thanks for your help.Hi
I think using user status only this will not possible, you need to check the enhancements. Becuse production order user status only control the function of the production order.
Thanks
S.Murali -
User status for order confirmation
Dear Expert
My requirement is when system status for maintenance order is CNF and authorize person agreed with all data in confirmation, he will set user status and then only I can complete my order (Teco).
Till now I created one user status OCAP (operation conf aprroved. ) and I allowded TECO only at this status. when system will have any other user status TECO is forrbiden. and it is working fine.
but now if my order is not CNF and person approves order(select OCAP) system allow to do TECO.
How I can stop this?
I mean if order status is not CNF even person select any user status system should not allow for TECO. If both condition are correct then only system will allow for TECo.
Please suggest
Regards,
Prasadsolved.
it is only works for operation
and not order header -
hi
when i read the oracle material i saw these many statuses in header and lines of order management.I request some one in this forum to explain when each statuses occurs or give us some link for reference.
The below is the list
Order Header Statuses
Following is a list of all possible statuses assigned to an order header.
• Active
• Awaiting Invoice Interface - Incomplete Data
• Awaiting Invoice Interface - On Hold
• Awaiting Start Date
• Booked
• Cancelled
• Closed
• Customer Accepted
• Draft
• Draft - Customer Rejected
• Draft - Internal Rejected
• Draft Submitted
• Entered
• Expired
• Internal Approved
• Internal Rejected
• Invoice Interface - Complete
• Lost
• Offer Expired
• Pending Customer Acceptance
• Pending Internal Approval
• Submitted
• Terminated
• User Working
Order Line Statuses
Following is a list of all possible statuses assigned to an order line.
• Awaiting Export Screening
• Awaiting Fulfillment
• Awaiting Invoice Interface - Incomplete Data
• Awaiting Invoice Interface - On Hold
• Awaiting Invoice Interface - Partially Interfaced, RFR Item
• Awaiting Invoice Interface - Pending Complete Delivery
• Awaiting Invoice Interface - RFR Item
• Awaiting Invoice Interface - Unexpected error
• Awaiting Payment Assurance - On Hold
• Awaiting Payment Assurance - Receipts Not Assured
• Awaiting Receipt
• Awaiting Reprice - Invalid setup
• Awaiting Reprice - On reprice line hold
• Awaiting Reprice - Pricing error
• Awaiting Reprice - Unexpected error
• Awaiting Return
• Awaiting Return Disposition
• Awaiting Shipping
• Awaiting Supply
• BOM and Routing Created
• Booked
• Cancelled
• Closed
• Completed Export Screening
• Config Item Created
• Customer Accepted
• Data Error Export Screening
• Draft
• Draft - Customer Rejected
• Draft - Internal Rejected
• Draft Submitted
• Entered
• Fulfilled
• Interfaced to Receivables
• Internal Approved
• Internal Rejected
• Inventory Interfaced
• Invoice Interface - Not Applicable
• Lost
• Offer Expired
• PO-Created
• PO-Partial
• PO-Received
• PO-ReqCreated
• PO-ReqRequested
• Partially Interfaced to Receivables
• Payment Assurance - Complete
• Payment Assurance - Incorrect Data
• Pending Customer Acceptance
• Pending Internal Approval
• Picked
• Picked Partial
• Preprovision
• Preprovision Failed
• Preprovision Requested
• Preprovision Succeeded
• Production Complete
• Production Eligible
• Production Open
• Production Partial
• Provisioning Failed to update Transaction Details
• Provisioning Rejected
• Provisioning Requested
• Provisioning Successful
• Provisioning in Error
• Released to Warehouse
• Reprice - Complete
• Reprice - Not Applicable
• Returned
• Scheduled
• Shipped
• Supply Eligible
• Supply Open
• Supply Partial
• Third Party Billing Failed
• Third Party Billing Requested
• Third Party Billing Succeeded
Regards
sudharshanHi Sudharshan,
Probably this link will explain you to the most
http://oracleappsdna.com/2011/07/sales-order-line-status-flow/
Also any status codes are part of some lookups. You can get a bit more information of the status in Lookup Description.
Thanks,
Shailender
Maybe you are looking for
-
Hello, I am running Mac os 10.6.8. It is shutting down without warning when I walk away from the computer for about 5 minutes. It happened twice. It was not asleep, i had to turn the computer back on...Any ideas... G. Mendel
-
Changing what happens when the I close the lid?
I recently switched from Windows to a 13" MacBook Pro. I really like my MacBook, however, I was wondering if there was a way to set what the computer does when I close the lid (i.e. instead of going to sleep is there a way to tell it to just stay on
-
BBP_MON_SC - BADI
Hi, Would like to know if the BADI BBP_MON_SC can be used to control the list output as per criteria like Purchase Group(assigned to the SC item). We need to give access to the buyers for this transaction and restrict the SC's they view to their own
-
How to identify that a host is connected to which particular edge switch
Hello Guys Can anybody explain how to identify that a host is connected to which particular edge switch and port in a Cisco SAN Fabric ??
-
Hi Can anybody please let me know how to make / create installable for an application?