Status in SXMB_MONI when using BPM?

I've dona a BPM that sends a mail whne a mapping or a transport creats a fault. This is done for async communication and works fine. In SXMB_MONI everything looks great with nice checketflags abd acks that indicats faults. This is done so we dont see the faults when the sender sends wrong contents but the sender gets a mail with the fault. Same with the communication and then the accurate person get a mail if that's down. Still checketflags in SXMB_MONI wich is great because the rigth person get a faster response if something is wrong and the fault get fixed faster.
Now I done the same for a sync communication but here I get the red dots in SXMB_MONI. In the async BPM I used transport acknowledgment to solve the red dots but that option are not availebal for sync communication. Dose anybody know an easy way to solve this problem?
The thing is that we want to use this solutionn for all our webservices and we want an easi implementation for it. Please say that i just missed an easy way to fix this.
BR
Kalle

In sync u will not find the Acknowledgment option as u will get a response or error in sync case. Ur implementation will change a bit. U have to include an exception branch which will be called in case of error in response. So whenever ur webservice sends an error response it will move to that branch and u may use the send mail option there
Regards,
Prateek

Similar Messages

Message mapping when using BPM?

We are doing a test to see if you can do a split of a string using standard functions, UDF or BPM.
We discovered that standard function has some of the functionality but if you are going to solve the problem that way the solution will be very complex. You will get no flexi bility in how to design the string and all the feilds will have to have fix length. So Standard functions are not the solution for us.
UDF works realy great. Write your java function and map it and everything are running.
We wont to test BPM as well. and i just started to look at it and how to solve it. I'm a newbee on BPM and for start I'm wondering how the message mapping should look to use in the BPM?
Sourcemessage looks as follow:
<Header>
   <Line>
      <SegmentA>   0 to unbounded
      <SegmentB>   0 to unbounded
      <SegmentC>   0 to unbounded
SegmentA contains a value to be copied to a segment in the target.
SegmentB contains a date to be copied to a targetelement.
SegmentC contains a string that we want to split into several elements in the target structure.
Targetmessage looks as follow:
<Header>
   <LineA>   1 to 1   (Will get the value from SegmentA in the sourcemessage.)
   <LineB>   1 to 1   (Will get the value from SegmentB in the sourcemessage.)
   <LineC>   0 to unbounded
      <ElementA>   0 to 1   (Will get a part of the string from SegmentC in the sourcemessage.)
      <ElementB>   0 to 1   (Will get a part of the string from SegmentC in the sourcemessage.)
      <ElementC>   0 to 1   (Will get a part of the string from SegmentC in the sourcemessage.)
To able to get the messages into BPM I need a interfacemapping and to do the interfacemapping I need to do a messagemapping. How should that messagemapping be configured?

> Now i want to try to replace that UDF with a BPM (Integration Process).
An UDF is part of a mapping and an Integration Process is used if you want to realize a more complex scenario then sending a message from System A to System B. In BPM you can do things like collecting messages, use timeouts, ...
But if you want to use a mapping in a BPM you define your mapping in your Integration Repository (like in a standard scenario without BPM) and then you can use the mapping in the Integration Process.
That's why i say it's maybe possible to realize your mapping without UDF (for example only with standard functions), but it makes no difference if you use BPM.
If you want to try finding a solution without UDF, i would suggest to open a new thread for this question.
Hope this helps.
Regards
Patrick

Presence status not changed when using Lync 2010 Remote Call Control

Hello,
I'm currently testing the Remote Call Control functionality of Lync 2010. Call management works fine but I'm surprised that my presence status does not change to "In a Call" when the call is established.
OriginatedEvent, DeliveredEvent and EstablishedEvent are forwarded correctly to Lync Client 2010. All responses are "200 OK".
Is there something more to send to Lync Server 2010 so the status of the Lync Client gets correctly updated to "In a Call" ? Or is a plugin for the Lync Client necessary to achieve this ?
Thank you in advance,
Martin

I think there's something missing from your scenario and I don't believe you would need a plugin for this. It's been forever since I've set up RCC with Lync 2010 however. I know this isn't what you're looking for, but I've used this product in
the past to configure Lync and RCC with third party PBXs that don't support Lync/RCC but do have a TAPI interface.
http://www.estos.com/products/drivers-middleware/callcontrolgateway400.html I've been able to get a free trial before and it worked like a charm for an old 3COM phone system. If you can get a trial it might help you compare apples to apples provided
you have a TAPI driver for your PBX.
For more details on what happens behind the scenes, you might have some better luck in the MSDN dev forums:
http://social.msdn.microsoft.com/Forums/en-US/home?category=uc
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

HTTP Error with Status code 403 when using ABAP Server Proxies

Hi All,
I have been working on ABAP Client and Server proxies in my project. The weblogs by Ravikumar, Prateek Shah, Siva Maranani & VijayaKumari were very helpful and thank them all for just helpful and guiding postings.
Interfaces using Client proxies are working fine and have been tested successfully. But I'm facing bit problems with Server Proxies. The scenario is of File to SAP system via XI. Data is coming correct up to Technical routing in pipeline but at call adapter(for Server Proxy to SAP)in XI pipeline I receive Error:
HTTP response contains status code 403 with the description Business Server Page (BSP) Error Error when sending by HTTP (error code: 403, error text: Business Server Page (BSP) Error)
Previously I was receiving authentication and authorization related error of status code 401 and then in communication channel I replaced user profile with a user id having role SAP_XI_APPL_SERV_USER. The basis peron has created new user id with role SAP_XI_APPL_SERV_USER only and that I'm using. I've tried creating a HTTP destination with the created user id and in test connection too receive same error message.
Please help me out with your inputs and understanding on the topic.
Thanks and Best Regards
Prashant Rajani

Hi Prashant,
Please take a look at these threads..They deal with the same problem, and they have been resolved here.
BSP Authorization error
Service cannot be reached . error code 403 the reason forbiddn
403 Error when accessing the server
Hope your issue gets resolved.
cheers,
Prashanth
P.S Please mark helpful answers

Server status constantly = republish when using @HandlerChain annotation

I'm just learning web services and have developed a very simple 'HelloWorld' type web service to play with. The service works fine with the test client that comes with Workshop.
The actual service I develop in the future will have to make use of a SOAP Message handler chain, so I've been following the directions in [this document|http://download.oracle.com/docs/cd/E12840_01/wls/docs103/webserv_adv/handlers.html] When I add the @HandlerChain annotation to the JWS file and save, the WebLogic server status changes to "republish," as expected. However, when I publish the server, the status remains "republish." Stopping/starting and restarting the server does not change this behavior. If I remove the annotation from the JWS file and publish the server, the status will change to "synchronized."
Has anyone who has worked with Handler Chains in web services using Workshop seen this behavior, or can you recommend a solution?

Answering my own question...
I eventually found the error log view and it told me what the problem was (an error in the XML file defining my handler chain).

[Exchange-Online][EWS-XML][JAVA][OAUTH2] Getting HTTP status code 500 when using OAUTH2 client credential grant flow as authorization method

Hi,
i'm working on enhancing a service to be able to use OAUTH2 as authentication protocol with client credential grant flow when talking to exchange online ( like described here:
http://blogs.msdn.com/b/exchangedev/archive/2015/01/22/building-demon-or-service-apps-with-office-365-mail-calendar-and-contacts-apis-oauth2-client-credential-flow.aspx ). I gave my application the rights
Office 365 Exchange Online : Application Permissions: "Have full access via EWS to all mailboxes ....."
Windows Azure Active AD: Application Permissions: "Read Directory data", Delegate Permissions: "Enable sign-on and read users_ profiles"
I receive a access token from log.windows.net:
decoded token:
typ: "JWT",
alg: "RS256",
x5t: "MnC_VZcATfM5pOYiJHMba9goEKY"
aud: "https://outlook.office365.com/",
iss: "https://sts.windows.net/<TENANT_ID>/",
iat: 1426584502,
nbf: 1426584502,
exp: 1426588402,
ver: "1.0",
tid: "<TENANT_ID>",
roles: [
"full_access_as_app"
oid: "1ddbdc11-b80d-4d1d-91b9-5b07a6b82659",
sub: "1ddbdc11-b80d-4d1d-91b9-5b07a6b82659",
idp: "https://sts.windows.net/TENANT_ID/",
appid: "<APP_ID_IN_AZURE_AD>",
appidacr: "2"
<SIGNATURE>
If i use that token then to send a EWS XML to exchange online i get a 500 HTTP status code back:
With impersonation in the request:
[http.wire ]: >> "POST /EWS/Exchange.asmx HTTP/1.1[\r][\n]"
[http.wire ]: >> "Authorization: Bearer <MY_ACCESS_TOKEN>[\r][\n]"
[http.wire ]: >> "SoapAction: "http://schemas.microsoft.com/exchange/services/2006/messages/GetFolder"[\r][\n]"
[http.wire ]: >> "Content-Type: text/xml; charset=utf-8[\r][\n]"
[http.wire ]: >> "User-Agent: OpenScapeUC EWS HttpClient/3.0[\r][\n]"
[http.wire ]: >> "client-request-id: 5b2c7e1a-656d-4f43-bd34-ea2d6290611f[\r][\n]"
[http.wire ]: >> "Date: Tue, 17 Mar 2015 10:08:17 GMT[\r][\n]"
[http.wire ]: >> "Content-Length: 1189[\r][\n]"
[http.wire ]: >> "Host: outlook.office365.com[\r][\n]"
[http.wire ]: >> "Connection: Keep-Alive[\r][\n]"
[http.wire ]: >> "[\r][\n]"
[http.wire ]: >> "<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Header><ns2:ExchangeImpersonation xmlns:ns2="http://schemas.microsoft.com/exchange/services/2006/types"
xmlns:ns3="http://schemas.microsoft.com/exchange/services/2006/messages"><ns2:ConnectingSID><ns2:PrimarySmtpAddress><THE_MAILBOX_I_WANT_TO_ACCESS></ns2:PrimarySmtpAddress></ns2:ConnectingSID></ns2:ExchangeImpersonation><ns2:RequestServerVersion
xmlns:ns2="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:ns3="http://schemas.microsoft.com/exchange/services/2006/messages" Version="Exchange2007_SP1"/></S:Header><S:Body><ns3:GetFolder xmlns:ns2="http://schemas.microsoft.com/exchange/services/2006/types"
xmlns:ns3="http://schemas.microsoft.com/exchange/services/2006/messages"><ns3:FolderShape><ns2:BaseShape>IdOnly</ns2:BaseShape><ns2:AdditionalProperties><ns2:FieldURI FieldURI="folder:FolderId"/></ns2:AdditionalProperties></ns3:FolderShape><ns3:FolderIds><ns2:DistinguishedFolderId
Id="contacts"><ns2:Mailbox><ns2:EmailAddress><THE_MAILBOX_I_WANT_TO_ACCESS></ns2:EmailAddress></ns2:Mailbox></ns2:DistinguishedFolderId></ns3:FolderIds></ns3:GetFolder></S:Body></S:Envelope>"
[http.wire ]: << "HTTP/1.1 500 Internal Server Error[\r][\n]"
[http.wire ]: << "Cache-Control: private[\r][\n]"
[http.wire ]: << "Content-Type: text/xml; charset=utf-8[\r][\n]"
[http.wire ]: << "Server: Microsoft-IIS/8.0[\r][\n]"
[http.wire ]: << "request-id: ec42b5c5-f8dc-498d-ae16-d851a852058c[\r][\n]"
[http.wire ]: << "Set-Cookie: ClientId=<DELETED>; expires=Wed, 16-Mar-2016 10:08:17 GMT; path=/; secure; HttpOnly[\r][\n]"
[http.wire ]: << "X-CalculatedBETarget: am2pr02mb0387.eurprd02.prod.outlook.com[\r][\n]"
[http.wire ]: << "X-DiagInfo: AM2PR02MB0387[\r][\n]"
[http.wire ]: << "X-BEServer: AM2PR02MB0387[\r][\n]"
[http.wire ]: << "X-AspNet-Version: 4.0.30319[\r][\n]"
[http.wire ]: << "Set-Cookie: exchangecookie=<DELETED>; expires=Thu, 17-Mar-2016 10:08:17 GMT; path=/; HttpOnly[\r][\n]"
[http.wire ]: << "Set-Cookie: [email protected]=<DELETED>; expires=Thu, 16-Apr-2015 10:08:18 GMT; path=/EWS; secure; HttpOnly[\r][\n]"
[http.wire ]: << "Set-Cookie: [email protected]=<DELETED>; expires=Thu, 16-Apr-2015 10:08:18 GMT; path=/EWS; secure; HttpOnly[\r][\n]"
[http.wire ]: << "X-Powered-By: ASP.NET[\r][\n]"
[http.wire ]: << "X-FEServer: DB5PR01CA0064[\r][\n]"
[http.wire ]: << "Date: Tue, 17 Mar 2015 10:08:17 GMT[\r][\n]"
[http.wire ]: << "Content-Length: 891[\r][\n]"
[http.wire ]: << "Accept-Ranges: none[\r][\n]"
[http.wire ]: << "Connection: keep-alive[\r][\n]"
[http.wire ]: << "[\r][\n]"
Without impersonation in the request:
Request
[http.wire ]: >> "POST /EWS/Exchange.asmx HTTP/1.1[\r][\n]"
[http.wire ]: >> "Authorization: Bearer <MY_ACCESS_TOKEN>[\r][\n]"
[http.wire ]: >> "SoapAction: "http://schemas.microsoft.com/exchange/services/2006/messages/GetFolder"[\r][\n]"
[http.wire ]: >> "Content-Type: text/xml; charset=utf-8[\r][\n]"
[http.wire ]: >> "User-Agent: OpenScapeUC EWS HttpClient/3.0[\r][\n]"
[http.wire ]: >> "client-request-id: 20bd722f-8276-4ebb-8d58-ce45d31f3ed4[\r][\n]"
[http.wire ]: >> "Date: Tue, 17 Mar 2015 09:33:24 GMT[\r][\n]"
[http.wire ]: >> "Content-Length: 871[\r][\n]"
[http.wire ]: >> "Host: outlook.office365.com[\r][\n]"
[http.wire ]: >> "Connection: Keep-Alive[\r][\n]"
[http.wire ]: >> "[\r][\n]"
[http.wire ]: >> "<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Header><ns2:RequestServerVersion xmlns:ns2="http://schemas.microsoft.com/exchange/services/2006/types"
xmlns:ns3="http://schemas.microsoft.com/exchange/services/2006/messages" Version="Exchange2007_SP1"/></S:Header><S:Body><ns3:GetFolder xmlns:ns2="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:ns3="http://schemas.microsoft.com/exchange/services/2006/messages"><ns3:FolderShape><ns2:BaseShape>IdOnly</ns2:BaseShape><ns2:AdditionalProperties><ns2:FieldURI
FieldURI="folder:FolderId"/></ns2:AdditionalProperties></ns3:FolderShape><ns3:FolderIds><ns2:DistinguishedFolderId Id="contacts"><ns2:Mailbox><ns2:EmailAddress><THE_MAILBOX_I_WANT_TO_ACCESS></ns2:EmailAddress></ns2:Mailbox></ns2:DistinguishedFolderId></ns3:FolderIds></ns3:GetFolder></S:Body></S:Envelope>"
Response:
[http.wire ]: << "HTTP/1.1 500 Internal Server Error[\r][\n]"
[http.wire ]: << "Cache-Control: private[\r][\n]"
[http.wire ]: << "Content-Type: text/xml; charset=utf-8[\r][\n]"
[http.wire ]: << "Server: Microsoft-IIS/8.0[\r][\n]"
[http.wire ]: << "request-id: 923ba463-490f-4ac9-a496-993cd8a44115[\r][\n]"
[http.wire ]: << "Set-Cookie: ClientId=<DELETED>; expires=Wed, 16-Mar-2016 09:33:24 GMT; path=/; secure; HttpOnly[\r][\n]"
[http.wire ]: << "X-CalculatedBETarget: am2pr02mb0387.eurprd02.prod.outlook.com[\r][\n]"
[http.wire ]: << "X-DiagInfo: AM2PR02MB0387[\r][\n]"
[http.wire ]: << "X-BEServer: AM2PR02MB0387[\r][\n]"
[http.wire ]: << "X-AspNet-Version: 4.0.30319[\r][\n]"
[http.wire ]: << "Set-Cookie: exchangecookie=<DELETED>; expires=Thu, 17-Mar-2016 09:33:25 GMT; path=/; HttpOnly[\r][\n]"
[http.wire ]: << "Set-Cookie: [email protected]=<DELETED>; expires=Thu, 16-Apr-2015 09:33:25 GMT; path=/EWS; secure; HttpOnly[\r][\n]"
[http.wire ]: << "Set-Cookie: [email protected]=<DELETED>; expires=Thu, 16-Apr-2015 09:33:25 GMT; path=/EWS; secure; HttpOnly[\r][\n]"
[http.wire ]: << "X-Powered-By: ASP.NET[\r][\n]"
[http.wire ]: << "X-FEServer: AM3PR07CA0038[\r][\n]"
[http.wire ]: << "Date: Tue, 17 Mar 2015 09:33:24 GMT[\r][\n]"
[http.wire ]: << "Content-Length: 799[\r][\n]"
[http.wire ]: << "Accept-Ranges: none[\r][\n]"
[http.wire ]: << "Connection: keep-alive[\r][\n]"
If i use BASIC authentication and impersonation the request is successfully.
Has anyone an idea why i might get the error 500 in that scenario?

For EWS to work with App Token, you need to do two more things. One you already did: Set the impersonation header. Two is to set the X-AnchorMailbox http request header to the smtp address of the mailbox you want to access. This routes the request instantly
to the right backend.
Hope this helps.
Thank you! Matthias

In SXMB_MONI with(Green Flag) "Message Scheduled Outbound Side" (using BPM)

Hi All,
I had a Scenario where I am using BPM (to collect the Idocs received from Sender SAP R/3 system) and create a File as target structure. But one of the entry i found as (Green Flag) with status "Message Schedule Outbound Side". But the remaining messages are processed successfuly through the same BPM.
I even found that the when i double click on the PE of the "Green flag entry". its leading to "qRFC Monitor(Inbound Queue) with empty entries" instead it should lead me to the workflows Log screen. Since other successfully messages are leading to workflow log when i double click on the PE.
Please let me know your comments on this.
Thanks,
Shailaja

Hi Gouri,
I am getting gray flag in the column (Status - XML Message Status) and green flag in Colum (C- Outbound Status). So this Greem flag itself is creating the problem, because of this itself my messages is not getting processed and not delivered to target system.
I have even checked SXI_CACHE, when i click on the Integration Process-- Right click on my BPM and select the "Activation Log" .. here a message which i had
I Language not set. Using system default E
The container element MULTI_INVOIC02 is written, but not read or exported
The container element MULTI_INVOIC02 is written, but not read or exported
So the "MULTI_INVOIC02 " is used in the Container Operation & Multimapping of my BPM. I suspect that error as taken place in doing Corelation. Do you have any comments on this. If i get any error in Corelation .. how can i debug my BPM.
Thanks,
Shailaja

Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete

SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT

Hi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!!

Po_headers_sv3.get_po_status is not returning Status when used in Report

Hi,
po_headers_sv3.get_po_status is not returning any value when used in an RDF report. But, when I set the MO Context in TOAD/SQL*Plus and running the same query, it is returning the status.
EBS Version : R12.1.3
Oracle Forms Version : 10g
Below is my query that I used.
* File Name :
* Modified By :
* Modified Date :
* Purpose : This report is modified for <> project. The changes are required due to PO_HEADERS_V, PO_LINES_V view changes in R12
* Modification History
* Change 1 : Replaced the view PO_HEADERS_V with the MOAC synonym PO_HEADERS
* Change 2 : Added AP_SUPPLIERS in the query to fetch VENDOR_NAME
* Change 3 : Added a join condition to fetch VENDOR_NAME
* Change 4 : Added a function po_headers_sv3.get_po_status to fetch PO_STATUS
SELECT POH.SEGMENT1,
POH.CREATION_DATE,
POH.ATTRIBUTE14 AS AR,
POH.ATTRIBUTE15 AS LS,
POH.ATTRIBUTE13 AS OBC,
POL.AMOUT,
PAHTEMP.FULL_NAME,
APS.VENDOR_NAME,
* poheaders_sv3.get_po_status (poh.po_header_id) Status -- Change 4 _+
FROM PO_HEADERS POH, -- Change 1
AP_SUPPLIERS APS, -- Change 2
(SELECT PO_HEADER_ID,
Sum(UNIT_PRICE*QUANTITY) AS AMOUT -- unit_price* quantity = extended_price
FROM PO_LINES
GROUP BY PO_HEADER_ID) POL,
(SELECT PAH.OBJECT_ID,
PAH.EMPLOYEE_ID,
PAPF.FULL_NAME
FROM PO_ACTION_HISTORY PAH,
PER_ALL_PEOPLE_F PAPF
WHERE (PAH.OBJECT_ID,
PAH.SEQUENCE_NUM)
IN (SELECT OBJECT_ID,
Max(SEQUENCE_NUM)
FROM PO_ACTION_HISTORY
WHERE OBJECT_TYPE_CODE = 'PO'
AND ACTION_CODE = 'APPROVE'
GROUP BY OBJECT_ID)
AND PAH.EMPLOYEE_ID = PAPF.PERSON_ID(+)
AND TRUNC(PAPF.EFFECTIVE_START_DATE) <= TRUNC(SYSDATE)
AND TRUNC(PAPF.EFFECTIVE_END_DATE) >= TRUNC(SYSDATE)) PAHTEMP
WHERE POH.PO_HEADER_ID = POL.PO_HEADER_ID(+)
AND POH.PO_HEADER_ID = PAHTEMP.OBJECT_ID(+)
AND POH.VENDOR_ID = APS.VENDOR_ID -- Change 3
AND (TRUNC(POH.CREATION_DATE) >= TRUNC(:P_DATE_FROM) OR :P_DATE_FROM IS NULL)
AND (TRUNC(POH.CREATION_DATE) <= TRUNC(:P_DATE_TO) OR :P_DATE_TO IS NULL)
AND (POH.SEGMENT1 >= :P_NUM_FROM OR :P_NUM_FROM IS NULL)
AND (POH.SEGMENT1 <= :P_NUM_TO OR :P_NUM_TO IS NULL)
AND (POH.ATTRIBUTE13 >= :P_OBC_FROM OR :P_OBC_FROM IS NULL)
AND (POH.ATTRIBUTE13 <= :P_OBC_TO OR :P_OBC_TO IS NULL)
AND (POH.ATTRIBUTE14 >= :P_AN_FROM OR :P_AN_FROM IS NULL)
AND (POH.ATTRIBUTE14 <= :P_AN_TO OR :P_AN_TO IS NULL)
AND (POH.ATTRIBUTE15 >= :P_LS_FROM OR :P_LS_FROM IS NULL)
AND (POH.ATTRIBUTE15 <= :P_LS_TO OR :P_LS_TO IS NULL)
&LP_CONDITION_ORDER
Please help me in this.

learnt that PO number has generated in SRM and the same PO number not exist in ECC.
check SM58 , rz20 log or Application monitor for the shopping cart.
or monitor shopping cart click the icon follow on document and errror message must throw in 1 minutes.
let us see .
1. what is the settings in define backend OBJECTS
2. check all basic data in the shopping cart - especially org data
3. run bbp_check_consistancy report for your id?
4. every user has the same issue?
SEE THE RICHARDO technique
http://wiki.sdn.sap.com/wiki/display/SRM/ShoppingCartStatusI1111-+Resubmit
Muthu
Report BBP_ALERT_SB_NOTTRANSFERED is available to change the status of the shopping cart item from I1111 to 'Error in transmission' (I1112) and later on, it is possible to retransfer this shopping cart from Application Monitor/Monitor Shopping Cart transactions.
1480994 How to process a shopping cart with status I1111
Edited by: Muthuraman Govindasamy on Jul 16, 2010 11:31 PM

Reg:Whether to use BPM or not when the channels are controlled externally

Dear All,
My scenario is File to File and for this the channels are controlled externally.
This is achieved through the Abap proxies to Http receiver scenario, where udf is being implemented for this.
UDF:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey trig = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", "UrlParamOne");
DynamicConfigurationKey trig1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", "UrlParamTwo");
DynamicConfigurationKey trig2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", "UrlParamThree");
DynamicConfigurationKey trig3 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", "UrlParamFour");
conf.put(trig,action);
conf.put(trig1,party);
conf.put(trig2,service);
conf.put(trig3,channel);
return "";
If the value of the Action is START then the existing communication channel should be stopped and restarted again .
If the value of the Action is STOP then the stop action should be performed.
For this I have implemented two mappings and condition is being given in Interface determination
so as to have the splitting of messages when the start action is performed.
Can anyone suggest me how to implement this by using a single mapping or this could be achieved only through BPM?
Thanks in Advance,
Lavanya .B
Edited by: Lavanya Balanandham on Aug 4, 2010 2:24 PM

Hi ,
My requirement is ,I need to merge two mappings into one mapping without using BPM.
My File to File scenario communication channel is controlled externally by using Proxy-to-Http scenario.
For this I have used two mappings say when the value for the action is START then the File receiver communication channel should be stopped(which is already polling) and again the Action START should passed to the Receiver File Channel to start again using the proxy-http scenario.
Now I need to merge the two mappings into a single mapping so as to perform the above stated flow without using BPM.
lavanya

How can I make the status bar hide automatically when using safari?

How can I make the status bar hide automatically when using safari?

When Safari is in FullScreen mode, menu bar will be hidden.
Safari window to fit the screen?
Move the mouse pointer to the bottom right corner of the Safari window.
Double arrows will appear. Drag it to resize the window to fit the screen.

Using BPM (Blocks) when Incoming message has multilple rows

Hi All,
I am using BPM in my scenario.I have a message with multiple rows coming.I want to check for a condition for each row of the incoming message.I am trying to use a block(Mode: For Each) and using a switch step inside this block.But in a block if u want to check for each line, we need to define a multiline container element as Source Interface message.Since I am already having multilple rows, I cannot give multiline option.Can someone give me some example scenarios where this type of scenarios are handled.
Thanks in Advance.
Soumya

Hi,
Here I am picking a file with multiple rows
The Sender Message Type structure is
<ns:File_MT xmlns:ns="http://File/send">
<recordset>
    <Slno />
    <Goods_Receipt_Date />
    <Material_Code />
    <Quantity />
    <Plant_Code />
    <Storage_loc />
    <Batch_Number />
    <PO_Number />
    <Item_Number />
    <Special_Stock_Indicator />
</recordset>
</ns:File_MT>
Here the row recordset has multiple occurences.
For my BPM I have defined an Abstract Message Interface of similar structure.
1)I am using a receive step to receive the message.
2)I am using a transformation step for structure change.
3)Then I have to check a condition whether each of the fields, ie material number,plant code etc are null or not.
I am using a switch for that.In the switch I have 2 branches-for error records and correct records.
Now in the eror record branch, I want to append error records to a container using a container operation and finally send it to another system.
Since my Source message is already having multilple rows.ie 0...unbounded for recorset, I can't define a multiline for container operation.The container operation expects a multiline container element when using append statement.
How should I go about this?Should I define a Loop after the transformation step?
Can you give me any example scenarios where transformation steps are used to change a source message with mutilple rows are used?I referred the FlightBooking Example, http://sap.com/xi/XI/Demo/Agency-SplitMultiplebookingOrder but in that they are not using the MessageTypes which are already defined, in the mapping.
Can anyone help?
Thanks and Regards,
Soumya.

When we will use BPM?.

When we will use BPM in a scenario?.
Why we use BPM?.
If we can do same scenario without using BPM, is it better?.

HI,
Also see the below links to get more details regarding BPM
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Regards
Chilal

Getting exception when trying to get taskdetails url using BPM worklist api

Getting exception when trying to get taskdetails url using BPM worklist api method :
String url = WorklistUtil.getTaskDisplayURL(
wfSvcClient,
ctx,
task,
null,
"worklist",
parameters);
Jul 21, 2011 11:24:40 AM oracle.bpel.services.common.ServicesLogger __log
WARNING: <oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerPropertiesFromMbean()> Exception while loading install config file in standalone Error : javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
oracle.fabric.common.FabricException: javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
at oracle.soa.common.util.PlatformUtils.getServerInfo(PlatformUtils.java:184)
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerPropertiesFromMbean(TaskFlowPropsUtil.java:319)
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerInfoForWeblogicServer(TaskFlowPropsUtil.java:491)
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.getServerInfo(TaskFlowPropsUtil.java:363)
at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getDefaultURLPrefix(WorklistUtil.java:264)
at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getTaskDisplayURL(WorklistUtil.java:353)
at oracle.bpel.services.workflow.worklist.api.util.WorklistUtil.getTaskDisplayURL(WorklistUtil.java:293)
at com.test.WorflowServiceClient.main(WorflowServiceClient.java:198)
Caused by: javax.management.InstanceNotFoundException: com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1094)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:662)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at oracle.as.jmx.framework.config.session.ConfigurationMBeanServerImpl.getAttribute(ConfigurationMBeanServerImpl.java:210)
at oracle.soa.common.util.PlatformUtils.getServerInfo(PlatformUtils.java:78)
... 7 more
Caught workflow exception: null
Process exited with exit code 0.
Can anyone please help me

Actually i'm using Jdeveloper 11.1.1.4 and our requirement is to show list of BPM worklist tasks for the logged in user on the first page and onclick of each task task details page should be opened. I can use Webcenter PS3 worklist taskflow. But i'm not able to customize that taskflow. So, i'm going for Worklist client api.
I'm able to retrive the taskId,task title and few other details like task payload. But i don't know why the below method is giving exception.
String url =
WorklistUtil.getTaskDisplayURL(wfSvcClient,
ctx, task, null,
"worklist", parameters);
And i observed that you have also used the same code for getting Taskdetails url. And one more thing is i'm trying to access BPM worklist which is installed on remote machine.
Can you tell me what could be the reason for the exception?

When to use BPM Standalone and BPM on Weblogic Server?

Hi,
How are you?
We are starting a project that involves BEA BPM, I have a question regarding which installation flavor should we go for, what is the difference between how BPM works when using Weblogic or Stand alone, what advantages are given when installing it over weblogic vs installing the Standalone version?
Thanx in Advanced!
Kind Regards,
Gerardo J

Hi Gerardo:
There are a lot of considerations about your question. The main difference is clearly the Aplication Server, while a Standalone version have an imbebbed TOMCAT 5.5 , the WL version requires at least Weblogic Server 8.2.
First, there is an important question that you must answer:
Your organization architectonical deployment supports Weblogic products? (weblogic, service bus, tuxedo, etc.)
Do you have a service bus? Does your organization / project this requirement?
Has your organization TOMCAT experience /support?
How many concurrent users your solution intends to support?
Is there experience about BPM's development?
Try to solve this initial questions. The decision isn't about the product, is about how do you plan to solve your organization business and IT needs.
Best regards,
Carlos
Translated
Hola Gerardo:
Hay un grupo de consideraciones sobre tu pregunta. La principal diferencia entre las versiones corresponde al uso del servidor de aplicaciones; mientras la version SA utiliza un Tomcat 5.5 embebido, la versión WL utiliza versiones superiores a la 8.2
Para resolver tu duda, debes al menos responderte estas preguntas:
¿Mi arquitectura empresarial de aplicaciones se integra a soluciones de weblogic?
¿Tienes un bus de servicios empresariales?
¿Tiene la organizacion experiencia en desarrollos de Tomcat?
¿Cuantos usuarios concurrentes utilizarán el sistema?
¿Hay experiencia en el equipo con la metodología de desarrollo para BPM?
Trata de resolver esto inicialmente. La decisión del producto no es por el producto en sí, sino que en realidad al producto que mejor se integre a la realidad que presente tu empresa, al solucionar el problema de negocio, de forma sustentable con tu estructura de TI.
Saludos y suerte,
Carlos.

Status in SXMB_MONI when using BPM?

Similar Messages

Maybe you are looking for