Status mappiing (CRM & ECC)

Hi All,
We are creating the quot in crm, after changing the "x" status it replicate to ecc, here it showing the same status which is in crm, but when we create the SO, it showing the different status in the both the system.
Earlier it works fine, but we are facing this from couple of days, can you please any help us to solve this issue.
there is no error in customization.
Regards
Sathish

User status is not transferred in data exchange ,they get determined in the R/3 or CRM.
The userstatus is not mapped from CRM to R/3 and vice versa. Only the
overall-, credit-, billing-, delivery- and rejection status are
replicated.

Similar Messages

  • System Status Vs User Status updates from ECC to CRM

    Hi Frnds,
        Am facing a problem in Status Management , We have ECC as Backend , When ever we save the order in CRM it is Relicated to ECC thrgh CRM Middleware.
       (I) I have created User Status 'Z' Status Profile in CRM and Assigned that Profile to Status Triggering Business Transaction and to the Transaction Type.
              I have assigned this Status to INProcess and Released , with my 'Z' Status.
    I have Maintained the Same User Status Profile in ECC also.
    My questions are
    1) How can i Maintain the System Status with User Status in ECC (For example in CRM we maintain thrgh Business Transaction ,last field in Status Profile.) ?
    2)When ever i change the status in ECC that Status as to be update in the CRM?
            But here Order in CRM is not updated , For example , if i change the status to "COMPLETED" in ECC ,the Status "COMPLETED" is not triggered in CRM.  
            Here i need write a BadI or is there any Config settings that i need to Mainatain ??? or anything different approach ??
       Helpful Answer will be Rewarded with Points .
    Thanks in Advance
    Reagards
    Ram

    Hello Charitha,
    In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
    for your RFC destination (ECC).
    This would prevent any automatic data flow for this object from R/3 to CRM.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • CRM - ECC flow

    Hi Experts,
    We have a requirement to extract data from CRM to BI.
    Please clarify few doubts related to CRM.
    1. What is the common data between CRM and ECC.
    2. What is the document flow from CRM to ECC i.e. which will be created first and why i.e. Prospects, Contract, Lead, Oppurtunity,Quotation etc
    I am little bit confused why CRM is integrated with ECC.
    Needs your inputs.
    Thanks in advance.
    Regards,
    Bhadri M.

    Hi Deepa & All,
    Thanks for your valuable inputs.
    Few questions,
    1. In CRM, I want to see
    Across a Business Partner how many Leads are there, against each Lead how many Opportunities are there with Opportunity status and the Quotations against each Opportunity.
    Please provide if there are any tables where all these data is stored. If 2 or more tables are involved please provide the link from one table to other.
    2. Are Business Partner in CRM and Customer in ECC same i.e. If a business partner is created in CRM say 1 then will the same 1 will reflect in ECC automatically ?
    3. In CRM we are having Quotation, do we have even Contract ? If yes for Quotation & Contract status do we need to go for CRM or ECC ?
    Are Quotation & Contract in CRM & ECC same i.e. same data ?
    Please clarify what ever is possible from your end.
    Thanks in advance.
    Regards,
    Bhadri M.

  • Replicate System Status to CRM

    Hi,
    we integrated quotation management in CRM and ECC using Scenario A. the quotation is created in CRM and beautifully replicated to R/3. when we create order in R/3 using reference to the quotation, the quotation in the R/3 will have system status "completed" as it should be.
    but somehow, the quotation status in ECC does not replicate back to CRM as we find the quotation status in CRM remains "in process". is there any way i can get it replicated?
    thanks in advance
    JD

    Hi Gunawan,
    how are you doing?
    i have implemented similar notes #1008685 which is relevant for CRM 5.0 and ECC 6. but still no luck yet.
    so what i did i tried making simple change in ECC such as entering PO#, to see if it replicates back to CRM. but the change in fact is not replicated while in data exchange scenario A it's supposed to. i guess to fix this issue i need to solve the replication issue from ECC to CRM.
    regards
    JD

  • User Status Replication-CRM to R/3

    HI Gurus
    Our requirement is to replicate the Item level user statuses in CRM Service order to R/3.We will use BADI- CRM_DATAEXCHG_BADI and methodCRM_DATAEXCH_AFTER_MBDOC_FILL.
    Would appreciate if you can let me know how to fill the item status information into the MBDOC.By this,I mean which component to use pertaining to item level user status to fetch the info.
    Thanks in advance
    Madhav

    Use FM CRM_STATUS_READ
    Hope it helps.
    Lokesh
    PS. Pls. reward helpful posts.

  • Using SOA for CRM --- ECC communication

    Hi,
    We have the following standard CRM ECC update scenarios
    Condition Updates
    Master data sync up etc.
    We have ECC 6.0 and CRM 7.0.
    We are trying to evaluate a scnario in which we can replace the CRM middleware by SOA services provided by SAP.
    Are there any pointers to do the same.
    Any help would be appreciated.
    Regards
    Abhishek

    We figured out the issue.  There is a transaction launcher setting specific to MDB that has a https flag.

  • CRM-ECC Integration Issue

    Hello Experts
    I have an issue with data replication from CRM to ECC. My requirement is as follows:
    1. There are few countries which have already gone LIVE with SAP CRM & ECC. In those cases, Customers will be created in CRM and the same will be replicated in ECC. The same happens for Quotations/ Sales Orders which gets replicated in ECC.
    2. The business requirement currently is to prevent the replication of Customer master based on Account in ECC from CRM system for the countries which are going Live in future. Also teh Sales Orders, quotations which are created in CRM must not be replicated in ECC system & the same must be controlled based on Sales Area in ECC.
    I am not sure of which Function Modules in ECC must be checked, so that we can find solution for the above. Probably, I am thinking of going for Z table for maintanenace of account groups and Sales Area in ECC, so that we can have better control.
    Appreciate your earliest reply.
    Regards,
    Mohan

    For filtering the data that flows from ECC -> CRM you can set filters in R3AC1, R3AC3, etc.
    For filtering data flowing from CRM -> ECC you need to filter based upon subscriptions in SMOEAC. You need to use an inteiligent Replication object assigned to your subscription for this purpose.

  • CRM - ECC Integration

    Hello Everyone,
    We are trying to prototype the WebChannel part of CRM 7.0. However, as part of the prototype we'd like to leverage our SAP ECC 6.0 system to connect the CRM system to. But we are not sure what impact does connecting CRM to ECC will have on the ECC side. Would there be any impact on the ECC system? Impact like Configuration change, Data structure change, Enhancement Package change, or anything else?
    The admins of the ECC system do not want to see any kind of impact on the ECC system because of the CRM connectivity. They are very strict about this as there are other activities that are happening on ECC system which should not get affected in any fashion.
    Can someone please tell me what kind of impact will be on the ECC system because of connecting it to a CRM prototype system?
    Again, our mission is the prototype CRM WebChannel.
    Thank you,
    Kiran

    Hi Kiran,
    Prototyping "Webchannel" is a very broad area and could lead to transaction documents that shouldbe replicated from CRM to ECC.  "Connecting" CRM to ECC is not a single step process but depends on what that connection is intended to do.
    If you do not want to replicate anything between CRM and ECC there is no need to connect them and thus no issue with prototyping in a standalone environment.  The first step is to setup the communication path and that is generally safe.  Then, there may be some configuration that should be replicated from ECC to CRM to allow the Master Data to be replicated. Unless you intend to replicate transaction data there is little chance of configuration conflicts.
    One thing to remember is while initial replication is unidirectional (ECC->CRM or CRM->ECC), delta replication is often bi-directional. Subscriptions and filters allow this to be controlled somewhat, but there are objects for which this is not the case.
    As to whether you should do a standalone prototype, I believe that will depend on your timeframe and what you want to prove.  It is usually better to start with as much actual data as possible and that requires the ECC<>CRM connectivity.  You would not want to prototype only to find out that something like your customer group structure in ECC can not be supported by the Webchannel scenario you want to implement.
    Regards,
    Roy

  • CRM-ECC BP roles

    HI,
    I need to integrate CRM-ECC customer master data.
    I have the 'FI Customer' role in ECC, but I have not seen a similar BP role in CRM (that allows me to enter Company Code).
    Where can I find the matching BP roles between CRM-ECC?
    Any input is very much appreciated. Thanks

    BP data is different in CRM to ECC.  Matching roles in CRM to account groups in ECC.  Look at t-code PIDE in ECC.

  • BW Status for CRM Leads

    We have an issue where the leads are not picking up the user status from CRM in the 0CRM_LEAD_H extractor.
    I have read the associated notes and have gone through the customization of the extractor. I added an append structure for the field BWSTONELEAD and completed the necessary config in SBIW for that status object group and status object. The only thing extra I had to do was manually change the value in ROOSFIELD for the field to show up in RSA6.
    The strange thing is that we have done the same configuration for BWSTONEOPPT for the 0CRM_OPPT_H extractor, and the values come through perfectly fine. Everything seems to be the same between opportunities and leads in the extractors, yet values come in for Opportunities and not for leads.
    Anyone have any ideas? We're on CRM 5.0 -> BW 7.0
    Thanks!

    Hi,
    I have a similiar issue.
    If u have solved it, can u share, how u solved the issue.
    Thanks,
    Raja

  • Lead Status in CRM

    HI CRM experts,
    Is there any way I can set all the leads existing in CRM from particular date to Inactive in one go. Doing it manually requires lot of efforts. Scenario is like that I some 1000 leads were loaded on 5th of January now I want to make them all inactive now currently they are in "Active" status in CRM. Any help in this regard will be appreciated.
    Thanks,
    Ashutosh

    Hi
    write ABAP program that, for number range of leads that you will provide, will check if they have date = 5th jan (eg with FM crm_order_read), and if yes with FM eg. crm_order_maintain, you will change its status.
    Regards
    Radek

  • Cannot replicate status of the equipment to the component status in CRM

    Hi ;
    When I set the deletion flag via IE02 in ECC system and I want to see this flag must be set on the component namely in ib52 of CRM.
    Isnt it possible to do this in standard way?

    Hi Shanthala;
    Firstly Thanks for your reply. but the oss note is related to material not equipment and the status of material  already comes to CRM correctly in commpr01.
    I need to see the status of a compoment on CRM side.
    Thanks.

  • User Status replication to ECC

    Dear Frnds ,
       I am Facing a Problem in updating the User status from ECC to CRM and CRM to ECC ( Delta Load) . When we are creating the order in CRM, this order is replicated to ECC and initial user status has updated in ECC.
       When ever user status is updated in ECC or CRM, the changes are not updated.
    Where as when we checked the bdocs, this status is appearing in BDOC, where as same is not updated in Order.
       Kindly let us know, is there any specific settings or developmenets need to be done to replicate the user status in order from ECC <-> CRM.
       Thanks all for your help.
    Regards,
    Pola

    Hi,
    User status dont get replicated automatically.
    You'll need to implement a BADI CRM_DATAEXCHG_BADI and method CRM_DATAEXCH_R3D_MBDOC_FILL for R3 to CRM.
    For CRM to R3 CRM_DATAEXCH_AFTER_MBDOC_FILL.
    Kindly reward with points in case helpful
    Sharif

  • Integration steps for Transfering Marketing plan CRM - ECC

    Hi Experts ,
    Could any one give step by step integration process to transfer  Marketing plan from CRM to R3 once its status is changed to released
    Thanks & Regards,
    SAP CRM

    Hi SAP CRM,
    you need to follow teh steps mentioned to transfer camapign from CRM to R/3
    1. In Spro>Customer Relationship Management>Marketing>Marketing Planning and Campaign Management>System Landscape
    Define RFC Connections
    Define Target Systems (ERP, BI, SEM, CPRO)
    Define ERP Integration Type-if it is online,carry out step a,if it is middleware carry out step b
    a.Assign ERP Project Profile to RFC Destination
    b.Assign ERP Project Scenario to RFC Destination
    Define Formatting Mask for Marketing Projects(this should be same as in ECC only then successful transfer is possible)
    after this is done,to transfer the plan
    1. If you use Online ERP integration type,after you release your plan,
    select transfer to ERP from the menu(you will be taken to a new screen,)put the ERP destination there,select the row and press the button transfer to ERP,you plan will get transferred to ECC
    2.  If you use Middleware integration type,the moment you can the status of marketing plan to Released,the plan gets transferred to  ECC
    You can check it in ECC by using tcode  CJ20n
    Regards
    Itty

  • How to update user status in CRM Order depending the delivery status in R/3

    Hi All,
    In my scenario the partial delivery allowed to the customer while creating the CRM Order. But as per my requirement the status should be updated when the complete order and delivery takes place.
       Let me describe you clearly:
    Suppose I want to deliver 5 quantities products to the customer but initially I want to deliver only 3 quantities and rest 2 quantities later. When I do the post goods issue of 3 quantities in R/3 system the status should not change in CRM system. When I will do the rest 2 quantities in post goods issue in R/3 then the user status should change in CRM Order. But in current when I do the delivery of 3 quantities the user status is changing in CRM Order.
    I need the user status should change in CRM only when the entire deliverytakes place in R/3.
    Thanx
    Chinmaya

    Whenever an item is fully delivered, by standard, a "Completely Delivered" status will be updated into the item. If the I suppose by referring to that you will know an item is partial or completely delivered. When all items in the order is fully delivered, the standard header status will set to "Completed". So, you will also know if the whole order is partial or completely delivered.
    If you want to add a user status, the simplest, you can make use of the ORDER_SAVE Badi. Just call the function CRM_STATUS_MAINTAIN_OW. You can update both header and item status.

Maybe you are looking for