System Status Vs User Status updates from ECC to CRM

Hi Frnds,
    Am facing a problem in Status Management , We have ECC as Backend , When ever we save the order in CRM it is Relicated to ECC thrgh CRM Middleware.
   (I) I have created User Status 'Z' Status Profile in CRM and Assigned that Profile to Status Triggering Business Transaction and to the Transaction Type.
          I have assigned this Status to INProcess and Released , with my 'Z' Status.
I have Maintained the Same User Status Profile in ECC also.
My questions are
1) How can i Maintain the System Status with User Status in ECC (For example in CRM we maintain thrgh Business Transaction ,last field in Status Profile.) ?
2)When ever i change the status in ECC that Status as to be update in the CRM?
        But here Order in CRM is not updated , For example , if i change the status to "COMPLETED" in ECC ,the Status "COMPLETED" is not triggered in CRM.  
        Here i need write a BadI or is there any Config settings that i need to Mainatain ??? or anything different approach ??
   Helpful Answer will be Rewarded with Points .
Thanks in Advance
Reagards
Ram

Hello Charitha,
In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
for your RFC destination (ECC).
This would prevent any automatic data flow for this object from R/3 to CRM.
Hope this helps!
Best Regards,
Shanthala Kudva.

Similar Messages

  • Material Updates from ECC to CRM

    Hi Experts,
    We recently had application of Enhancement Pack4 on our ECC system. After the application EHP4 pack, we have started getting some material updates from ECC to CRM. And those updates are failing in CRM as we do not have any material set up in CRM. Due to these failed updates, lot of dumps are getting created in CRM. So can u please advice where/how in ECC i can restrict these updates to go to CRM. Any help in this will be highly appreciable.
    Regards
    Charitha

    Hello Charitha,
    In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
    for your RFC destination (ECC).
    This would prevent any automatic data flow for this object from R/3 to CRM.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Changes are not updated from ECC to CRM How to debug

    Hi,
    QCs 1140049726  and 1140047459 were updated in P20 system to remove the WBS.  This was done per normal P20 process and instructions.  P20 system correctly reflects that QCs have no WBS value and the contracts are BOX - all is correct in P20.
    CSP still shows these QCs as having a WBS assigned to them.  This is incorrect.  It has been over 24 hours since the P20 QCs were changed to reflect no WBS, but CSP still has not been replicated with the correct data.
    How to proceed with it. How to debug from ECC to CRM.
    Prem.

    Hello Prem,
    Could you please have a look at SAP note 656823?
    This note contains debug tips for btx data transfer. Please check point 6 which talks about the delta download.
    Hope this could be helpful.
    Best regards,
    Maggie

  • User status transfer for sales orders from ECC to CRM

    Hi,
    We use business process with CRM sales orders that are transfer to ERP.
    Users can change user status in the sales orders in ERP.
    How we can replicate custom user status from ECC Sales Order to CRM Sales Order?
    What is the steps to do this for CRM 7.0?
    Denis

    Hi,
    We are creating quotation ZPQT in CRM which is then get replicated to ECC on saving it on “Accepted” status. In ECC we then create sales order of type ZPOR. Sales order gets replicated in CRM and also updates document flow. This sales order is called as “Project Sales Order”. PS team assigns WBS element to this order and does billing later on. Upon billing document is created sales order status in ECC changes to “Completed”. This is system status. But the issue is status of order ZPOR is CRM remains in status “Inprocess”. We want it to change to “Completed”.
    We have similar scenario with order type ZOR. In this order after delivery and billing ECC assigns status “Completed” to sale order and same gets replicated to CRM.
    In CRM for user status Completed we have assigned system status as FINI. Both ZPOR and ZOR has same status profile assigned at header and item level.
    Our concern is if status is changing back in CRM for ZOR then why not for ZPOR. What is stopping system to do so?

  • How to fetch service order with partucular system status and user status

    Hello All,
    How to fetch service orders with specific system status and user status.
    thanks

    I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
    I want to fetch released service orders with status INIT and RENT.
    Here, SYSTEM Status = Released and
             USER Status     = INIT
                                        RENT
    So is there any function module available for the same.....

  • Replicating Quotation overall status from ECC to CRM

    Hi,
    we're using quotation management replication scenario A in ECC6 and CRM 5.
    when the quotation is referenced to sales order in ECC, the overall status becomes "completed" in ECC. but somehow, the overall status of the quotation in CRM remains "not processed".
    is there anyway i can get the overall status in ECC replicated to CRM for Quotation Management?
    Regards
    JD

    Hi Susana,
    i got reply from SAP mentioning that this is standard behavior. unless i replicate the referencing sales order document from ECC to CRM, then the CRM quotation system status won't be set to completed whenever it is referenced to sales order in ECC. we do not have any business need to have the sales order in CRM, but that's the way it is.
    Regards,
    JD

  • Difference between system status and user status.

    Can someone explain to me the difference between system status and user status in details

    Hi,
    As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
    In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
    System statuses will be updated automatically based on business transactions which will be done on SAP.
    For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
    If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
    These user status as per the name, should be updated by the user manually.
    Regards,
    Maheswaran.

  • How to get system status and user status of service order

    Hi,
    I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
    I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
    Regards,
    Kamesh Bathla

    Hi,
      Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
    Regards
    Srinu

  • Fetching the sales order data using both system status and user status

    Hi,
    Could any one tell me how to fetch sales orders using both system status and user status.
    My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
    For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
    Early replies are appreciated.
    Thanks
    Tanveer

    Hi,
    The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
    Regards,
    Dipesh.

  • System status and user status Priority

    Hi All,
    We have system status and user status for the production order, I would like to know which has higher priority.
    E.g In system status some business activity are not allowed but at the same time for user status those activites are active, then which status has high priority.
    Regards,
    Ranjan

    Hi,
    As per my understanding both the status work together. If User status forbids a business transaction and system status allows it, then also the business transaction cannot be carried out.
    Also if system status forbids a business txn and user status allows that, then also you wont be able to carry out the txn.
    Both work with "AND" condition.
    Regards,
    Rohit.
    Added: you can try it by creating a User status profile. Allow Goods Movement to CRTD status. Now dont release the production order, only save it. Then try issuing goods (261), the system will block you.
    Now, other way round, forbid GR without confirmation. Though System Status allows GR without CNF or PCNF status, but the user status will forbid the transaction.
    Hope the example helps.
    Regards,
    Edited by: Rohit Chauhan on Jun 5, 2009 9:09 AM

  • System status and user status in Line Item Reports

    Dear PS-friends,
    I have to extend the CI CI_PROJ with some new fields. These fields should be shown in diverse Line Item Reports (CJI3 u2026).
    I know how to get these customer fields into the field catalog for the reports (maintain include table CI_RKPOS, EXIT_SAPLKAEP_001 and ViewCluster V_TKALV).
    Now our customer wishes that 2 of the new fields are: system status and user status. The status should be shown in CJI3 as a concatenated field as you see it in CJ20N.
    In CN42 there is the column system status as a standard column. But I cannot find the structure CNJ_STAT included in V_TKALV for Line Item Report Object=PD.
    Has anybody an idea how it works to show the system status and user status in Line Item Reports.
    Thanks in advance!

    Problem is solved.
    I wrote a function module using FM 'STATUS_TEXT_EDIT' and concatenated line and user_line.

  • How to get system status and user status ?

    how to get system status and user status for the given production order?
    In which PP table we can
    find these?
    Thanks&Regards
    Satish

    Hi Ram,
    Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
    Alternatively, the following tables store the user and system status info:
    JSTO- Status object information
    JEST- Individual Object Status
    Hope this helps.
    Let me know if u need further information.
    Regards,
    Sonal

  • Mapping of field from ECC to CRM - DChain-spec. status field

    Hello,
    In my current assignment we will be downloading all the master data from ECC to CRM. For a particular requirement, we need a field in COMMPR01 in CRM from material master MM03 in ECC.
    Field Location: MM03> sales:sales org1>DChain-spec. status
    Please find below technical infomation for that field ( ECC)
    Field Data:
    Table Name: MVKE
    Table category: Transparent table
    Field Name: VMSTA
    Data Element: VMSTA
    Field Description for Batch Input
    Screen Field: MVKE-VMSTA
    Program Name: SAPLMGMM
    Screen Number: 4000
    Please help me in locating the same field in CRM (COMMPR01)
    Regards,
    Vipul

    Hi Vipul
    Please implement note 1494159. This should doanload this field as well then.
    Best regards
    Christophe

  • Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

    Hi All,
    I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
    But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
    Please help me as to how to resolve this issue.
    Thanks in advance,
    Shubham

    Hi Shubham,
    Please check the queues in SMQ2 and what status they are showing?.
    Thanks,
    Faisal

  • IO system status and user status

    Hi all,
    Could you please tell me where the link between IO sys and user status.
    Thank you.

    Hi
    System status and User status:
    System Status
    o        The system sets a system status informing the user that the system has executed a certain business transaction for an object.
    o        You can only influence this status by executing a business transaction that changes the system status.
    o        If you release an internal order, the system automatically sets the Released system status.
    User Status
    o        You can set a user status in addition to the existing system status.
    o        You specify the user status in a status profile, which you create for each order type in Customizing.
    o        You can specify and activate any number of user statuses.
    o        In a production order you can simultaneously
    The system status and the user status influence the business transactions in the same way.
    The status profile allows you to:
    o        Define the user status and document its functions with a corresponding long text.
    o        Assign a status number that specifies the order in which the system reaches the user statuses.
    o        Define an initial status, which is then automatically set when an object is created.
    o        Determine that a user status is automatically set when you execute a business transaction.
    o        Permit or forbid specified transactions, if a status is active.
    VVR

Maybe you are looking for