Status of task
Hi,
I am calling a standard function module with additional option <b>STARTING NEW TASK</b>. After execution of this how i will get the status ? Whether any way can i get the status if i am calling function module with STARTING NEW TASK?
Thanks
aRs
Hi,
After using STARTING NEW TASK..You would have given
PERFORMING <b>'SUBROUTINE NAME</b>' ON END OF TASK
Then in that subroutine you have to use
RECEIVE RESULTS FROM FUNCTION 'YOUR FM'..
to get the results..
Thanks,
Naren
Similar Messages
-
Change User status of Task of Follow up function
Hi All,
Does any one of you know how to change the User status of Task through customizing or programming.
Basically I want to change User status from 'TINI' to 'TSNT' once the email is triggered. I could send the email but I am unable to change the status.
Thanks in advance,
JagadishHey Thomas,
This should solve your problem..
CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN'
EXPORTING
client = sy-mandt
objnr = wa_new_user_status-guid
user_status = wa_new_user_status-status
no_check = 'X'
SET_INACT = ' '
SET_CHGKZ =
XNOAUTO =
EXCEPTIONS
object_not_found = 1
status_inconsistent = 2
status_not_allowed = 3
OTHERS = 4.
In this FM NO_CHECK parmeter must be set to True, else u wil not be able to set the Status.....
Sample is given above...
Reward points for usefull answer...
Regards,
Anand... -
Changing status of Task created by system in Notification.
I am facing a problem while changing status of "Task" in Notification to "Complete". Actually I want that if system is cretating a Task automatically in Notification, this Task should have status "Complete" instead of release.
For this to happen I did some settings but after that system is giving me arror as shown in below.
If any body has faced simmilar situation, pl. give some clue.
Object does not exist (status management)
Message no. IM258
Diagnosis
This refers to an error in central status management.
Task status
The central status management connection at task level will only be supported from Release 3.0.
For this reason, no task status is available for statuses created before changing to Release 3.0, and status change is therefore also not possible.
Procedure
In the case of task statuses of notifications in releases prior to 3.0:
When you save a notification you can create a status for the tasks.
In the case of notification or task statuses for notifications from Release 3.0:
Please refer to your system administrator.Hello Satyender,
if you try to change the status of a task this will lead to the described behaviour, this SAP standard.
Sorry that I can give you no solution in this case.
Regards,
Isabelle -
Checking the status of task records tied to the custom object 3
We are using custom object 3
There has been lot of configuration work done on this object.
There is a checkbox on the UI. When a user will checks off the check box, a task record(s) is created depending on the condition.
Is there a way for me to check the status on the task records and then set a field on the parent record i.e. custom object 3.
Thanks,
NitikaTo whom are you speaking?
-
Hi and sorry for the title but it well summarize my question.
In fact I applied a completion percentage of 25% on a task with a finish date inferior to the entered status date.
MS Project only modified the Act. work of the task but not its finish date.
Is it a normal behaviour?
Thanks a lot for help
PaulPaul --
To answer your question, yes, what you are seeing is normal behavior. If you want Microsoft Project 2010 or 2013 to automatically adjust the Finish date based on the Status Date, you will need to do the following:
Click File > Options > Advanced.
In the Calculation Options section of the Advanced page, select the option named Move Start of Remaining Parts Before Status Date Forward to Status Date.
Click the OK button.
If you select this option and enter task progress as you described in your question, Microsoft Project will force a task split, moving the uncompleted part of the task to start immediately after the Status date. In the same Calculation Options section
of the Advanced page of the Project Options dialog, you might also want to select the option named And Move End of Completed Parts Forward to Status Date. With this option selected in addition to the one mentioned in step #2 above, Microsoft Project
will move the completed portion of the task to the Status Date so that you do not see a task split at all.
Whether you use one or both of these options would be entirely up to you, based on what you want to see in the software. Neither is perfect, but I think one or both of these would give you the automatic scheduling that you seek. Hope this helps.
Dale A. Howard [MVP] -
OIM 11gR2 : Retrieve status of task
Hello Experts,
I have successfully provisioned a user to AD and also a group to AD.
When the user gets provisioned, then a task called Create User runs in the AD User process definition and when a group gets provisioned, then a task called Create Group runs in the AD Group process definition.
In the case of successful provisioning, the task returns a successful response code i.e. C.
I have a situation in which i want to retrieve the response codes for these tasks in my code. Eg : When a user gets provisioned to AD, i want to fetch the successful response code of the Create User task of AD User process definition in my code i.e. through OIM APIs.
Kindly help me out.Hello Experts,
I have successfully provisioned a user to AD and also a group to AD.
When the user gets provisioned, then a task called Create User runs in the AD User process definition and when a group gets provisioned, then a task called Create Group runs in the AD Group process definition.
In the case of successful provisioning, the task returns a successful response code i.e. C.
I have a situation in which i want to retrieve the response codes for these tasks in my code. Eg : When a user gets provisioned to AD, i want to fetch the successful response code of the Create User task of AD User process definition in my code i.e. through OIM APIs.
Kindly help me out. -
Retrive due date and status from task folder in Exchange server
Anyone to know how to access the data in task folder through java from Exchageserver
Thanks morgalr. If u have any sample code for JNI plz send it to [email protected]
Advance Thanks. -
Lost battery charging status from task bar
My 14 month grandaughter was playing with my T60 and now I don't have the charging status on my taskbar. I've gone through the Properties screens for the taskbar and disktop and don't see any settings I could change. T60 with XP professional.
CliffSearching the forum will find these 2 threads that will answer your question:
http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=7682
http://forums.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=7827
I am starting to think that this problem may not be the fault of our grandchildren, since it's showing up more frequently these days. Another SP3 glitch, perhaps?
T520 4239-CTO
T61/p 6459-CTO (Gone but not forgotten)
A31/p XP Pro 1 gig memory
A30/p XP Pro 1 gig memory
TP600 Win 2K 288 mb memory
701C Win 98 Don't ask -
What are the attributes available on Task Status Notification?
Hi,
I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
<Tasks.Task Name> is <Task Details.Status>.
<Task Details.Status>
<Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
Thanks,
Renato.
Hi,
I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
Thanks,
Hi,
One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
I think I'll have to call Oracle's Support.
=======================================================
Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
Body:
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Tasks.Task Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
=======================================================
As I've said, the e-mail was sent but in blank:
The Process task is .
The details of this process task are as follows:
Process Task Name:
Process Task Status:
Resource Name:
Target User: []
Assigned to: []
Response Code :
Response Description :
Error Details :
Is it possible to have those fields available on notifications?
Thanks,
Edited by: Renato.Guimaraes on 23/10/2009 08:05
Edited by: Renato.Guimaraes on 24/10/2009 15:57
Edited by: Renato.Guimaraes on 26/10/2009 13:31
I didn't get any answer until now.. Below it is what I've done.
a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
SELECT
sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
FROM
osi, sch, mil, rsc
WHERE
mil.mil_key = osi.mil_key and
osi.sch_key = sch.sch_key and
sch.sch_key = ? and
rsc.rsc_key = osi.rsc_key
c) Load the e-mail definition template and replaces the fields
d) Sends the e-mail
With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
Edited by: Renato.Guimaraes on 12/11/2009 12:19
Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread SubjectHi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman -
I have a custom approval sequential
private void completeSPTask_MethodInvoking(object sender, EventArgs e)
SPListItem task = workflowProperties.Web.Lists["Workflow Tasks"].GetItemById(WfApproveTaskItemId);
task[SPBuiltInFieldId.WorkflowVersion] = 1;
task["Status"] = "Completed";
task.SystemUpdate(false);
if (task["Status"].ToString() == "Completed")
Hashtable HTdata = new Hashtable();
// HTdata["Status"] = "Completed";
// HTdata[SPBuiltInFieldId.Completed] = "TRUE";
HTdata[SPBuiltInFieldId.PercentComplete] = 1;
HTdata["FormData"] = SPWorkflowStatus.Completed;
// HTdata[SPBuiltInFieldId.TaskStatus] = SPResource.GetString(new CultureInfo((int)task.Web.Language, false),"WorkflowTaskStatusComplete", new object[0]);
SPWorkflowTask.AlterTask((task as SPListItem), HTdata, true);
task.Web.Update();
workflow which works properly, the task status gets completed
When the tasks are 'In Progress' the workflow status also remains "In Progress" but when the task is completed , it shows error Occurred. The following is my code in CompleteTask method.I got it working by removing the complete task method and by updating the task in the ontaskchanged event , In that case both the task as well as the workflow gets updated
-
Hi Experts,
I saw in a thread that different functions were advised to be used whenever changing WBS status programmatically:
System status change of WBS element
I was wondering if a similar list also exists for task status. I need functions that perform the same checks when changing status than the standard for:
releasing tasks
confirming partially / completely tasks
teco tasks
Thanks in advance
Kind regards,
NeilNot aware regardging Program availability. But the same if you are amuaaly able to set up and to avoid ling time in data upload / Migration.. You can develop BDC and use the same for the changing status of task. I believe by task, you are referrring network activity.
Regards
Nitin P. -
Hi Gurus,
If I delete notification task those tasks status is not showing delete status in jest table.Due to thiswhen we want to execut the transaction( client Development) for all notification having open task then these delete notification tasks appears in the report.
My reqirement is that when a notification task gets deleted where i get the delete status for task.
Please help
Regards
Anil KumarHi,
If you don't want to diplay the notificaitons for which the tasks have been set for deletion here is the procedure to follow.
1. Create a status profile with the status DLFL.
2. Create a selection profile and assign the above status profile with the status DLFL as NOT.
3. While running the transaction QM13 run with the above seleciton profile. This will select all the notifications except the notificaitons for which the tasks have been deleted.
Hope this helps.
Prakash Dhabadi -
Dear Experts,
We have a situation after the EHP4 upgrade,
we were able to configure Restatement & status reporting.
But when we imported the Transport requests in another environments,
We have issue with the task statuses.
Like all the statues of the tasks in consolidation monitor changed to Initial stage.
please help us understanding this. Is it expected or is it an issue.
Do we have any remedy. can we get back the earlier statuses.
We have a Go live on this upgrade. plz help us in this situation.
Thanks
Kamal
Edited by: kamal kishore on Nov 12, 2009 2:39 PMHi,
After the upgrade we checked the status monitor & we found all the historical status of tasks were made to initialised status.
As per SAP while regenerating the data basis system created new table for status rather than the old table (not sure why)
Hence all the old period task status were made to initialised status.
SAP made a fix in the system & we could solve the issue.
Thanks
Kamal -
Dears
what is the menain of status in task
1.sucessful
2.release
Is it possible to complete a task with out release
When we will use Sucessful
pls explain
FaisalHi,
It is possible to complete tasks without release or successful. You can use release as a second approval stage after creation. Successful can be used to distinguish tasks from those completed with somehow unsatisfactory results. You may just create and complete tasks as well. -
FM to change task list status (Tcode IA06)
Hi all,
I need a FM to change the task list status.
Tcode IA06.. I have got fm to get the status of task list...CP_EX_PLAN_READ..but not able to fine one to change/.
(Given: Group, Group counter and profile..after this scrrn another screen comes...click the header atb to set the task list status)
can anyone help me?
Regards,Check this FM - CP_EX_PLAN_READ.
This gives u all the details .
CALL FUNCTION 'CP_EX_PLAN_READ'
EXPORTING
plnty_imp = t_mapl-plnty
plnnr_imp = t_mapl-plnnr
plnal_imp = t_mapl-plnal
sttag_imp = t_mapl-aedat
TABLES
plko_exp = t_plko1
plpo_exp = t_plpo1
plmz_exp = t_plmz1
EXCEPTIONS
not_found = 1
plnal_initial = 2
OTHERS = 3.
Edited by: Raj on May 27, 2008 10:28 PM
Maybe you are looking for
-
Camera save function not working correctly
When taking pictures my camera is intermittently saving the photos off center. I take the picture and when I look at the saved product everything has shifted to the right. Any ideas why this is happening and more importantly how to fix it?
-
Strange "tang" noise that seems to come from nowere very annoying anyone know whats the source
strange "tang" noise that seems to come from nowere very annoying anyone know whats the source
-
Creating, Editing & Exporting PDFs ! ! !
-
i have an ipod classic and i have tried to put films on but every format i try it keeps saying thei format not supported i have tried mp4 and .mov and it will not take it anyone got any suggestions on what format to use and the best way to convert fi
-
I've found the make command in /Applications/Xcode.app/Contents/Developer/usr/bin so in the terminal window I type that long path to make a makefile. Then I get the error message. /Applications/Xcode.app/Contents/Developer/usr/bin/gcc -Wall -c -o l