Status Rel is not allowed (ORD 301343)

Hi,
We want to change the User Status of and Internal Order under Control data tab.
Problem is that user 1st do the 03 Teco Technicaly Complete and after Teco, he want to change it into 02 Rel Released position.
when we are doing 02 Rel Released, system shows the message Status Rel is not allowed (ORD 301343).
Plz. help.

after all, control data screen shows the values....
System status......REL GMPS RESA SETC
User status..........Teco
Status number......3
Here i want User Status --> Rel -Released
How??

Similar Messages

"Create quotation for order" is not allowed (ORD 80000119 )

Hi,
After creation of service order I want to create quotation then system gives error massage as below,
"Create quotation for order" is not allowed (ORD 80000119 )
Message no. BS002
Diagnosis
The transaction 'Create quotation for order' is not allowed for ORD 80000119, because no status is set to permit it.
System response
You cannot carry out the transaction 'Create quotation for order'.
Procedure
You can carry out this transaction if you set a user status, which permits 'Create quotation for order'.
Thanks & Regards
kapil

Kapil,
Check the System status and user status of the order. Quotation can be created only before releasing the order (REL). or Any user status that may prevent creation of Quotation.
Babu

Goods Movement" is not allowed (ORD 100000)

I get the error below:
Goods Movement" is not allowed (ORD 100000)
How do I allow it?

hi
Check the REL status. Check whether your project/WBS/network has been released or not.(The network/activity should have an REL status set in the System Status
field).
regards
kunal

Error: GR "Goods receipt for purch. order" is not allowed (ORD 4000048)

Hi gurus, can anyone please help me
while doing service entry for the PO with account assignment F and Item Category D
our client is facing the error
"Goods receipt for purch. order" is not allowed (ORD 4000048) MSG no: BS007
Diagnosis
The current status of object 'ORD 4000048' prohibits business transaction 'Goods receipt for purch. order'.
Procedure
To process business transaction 'Goods receipt for purch. order', you first have to change the status of object 'ORD 4000048' to allow the transaction 'Goods receipt for purch. order'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
Anyone can give the solution please
Guruk

hi dear all
Really thanks for your prompt reply.
i solved this issue, as what u said, it is not released in IW31, at the time of PR creation. So i asked the User to go to IW32 anc choose the apprpriate order and change mode and click on Flag Icon to release.
Any way i awarded points for your support
Thanks
regards
Guru

"Goods Movement" is not allowed (ORD 100020)

When I do goods receipt via tcode MB1C and movement type 521 without production order number.An error occurs.
"Goods Movement" is not allowed (ORD 100020)
Message no. BS 007
Diagnosis
The current status of object 'ORD 100020' prohibits business transaction 'Goods Movement'.
Procedure
To process business transaction 'Goods Movement', you first have to change the status of object 'ORD 100020' to allow the transaction 'Goods Movement'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
If I input a production order number in ORDER field of account assignment block,I can complete the action sucessfully.So I want to know the reason.Can you help me?

Hi,
Pls check with the status profile in OPJH.
Check whether any user status has been set in that status prifile. ( say for ex .User status which forbids the the Goods receipt unless the Confirmations are completed )
Regards,
Sheik

HELP: "Goods receipt purch. order" is not allowed (ORD #######)

hello sap mm gurus/friends,
i would like to ask how do i go about resolving the error message:
"Goods receipt purch. order" is not allowed (ORD #######)
upon receiving the items in sap. The PO has an account assignment "F" (Order) against an internal order (ORD #######).
i came upon similar threads, and it was suggested that i should add "RMWE" (Goods receipt for purch. order) to Permitted Business Transactions. how do i do this?
thanks very much in advance.
regards,
albert

Hello Kami,
i was actually doing a goods receipt (MB01) against an invalid internal order. what i did was i requested the purchase requisitioner to choose a valid internal order that has been released and has not yet been fully consumed.
i hope this helps.
Best Regards,
Albert

Status Profile for not allowing UD before RR

Hi Experts
I have customized a User Status Profile not to allow UD if no RR is done.
But how ever in the case where I go to UD and try to do a UD for the lot which has not been RR it will give me status check error. So I cancel the error window and goes out of UD transaction. But while going out of UD transaction the system asks a "Confirmation Prompt 'Do you want to save your data first' "
If Yes is pressed the system saves the UD transaction (ofcourse with out a UD code) with Inspection Lot system status ICCO which will not allow the changing of results later.
How to over come this saving of Inspection lot and changing the status ?
Thanks
Jomy

Dear VRMP
When there is a status profile which will block UD without RR and still you try to give UD and try to save the RR gets locked. Please note that UD is not given for the lot.the status of the lot will be REL ICCO. The reason being systems automaticaly updated that inspection is completed
I have come across this issue. I have not found a solution for this. But i have found how to unlock the inspection completion
Go to QA11> Go to menu button EDIT> Reset > Inspection Completion> go to Edit again> Reset > Short term inspection > save> refresh the lot
Now the status of the lot will change from REL ICCO to REL CALC. You can now do the RR & give the UD
Hope i am clear now
Regards
gajesh

Internal Order with status as Released not allowing postings

Hi Experts,
We are trying to interface expense reports against Internal orders wherein the IO is in REL GMPS status but is rejecting the ERs.
Can we have the possible reasons for the same?

Hi..
You define user status management as below.(IMG Menu path : Internal order>Order master Data>Status Management)
-. If you select Status number “10”, SAP don’t allow FI posting.
-. If you select Status number “20”, SAP allow FI posting.
After you assing above user status to order type, you create internal order and you can control FI posting as below.

FI: Postings" is not allowed (ORD 50036237)

To process business transaction 'FI: Postings', you first have to change the status of object 'ORD 50036237' to allow the transaction 'FI: Postings'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
I am getting this error when trying to resolve an old order which has a cancelled billing document which has not posted to accounting, the user wants to clear it and we get the error
shown above in the subject.
Any help is welcomed.

Hi NR,
The Internal Order needs to be "Released".
Go to KO02, enter your IO number, enter.
Inside, in "Control Data" Tab, there will be "System Status" against which you can see the status of the Internal Order.
Press "Release" buttion which is there and Save.
Revert back for further assistance...
Srikanth Munnaluri

INTERNAL ORDER: "FI: Postings" is not allowed (ORD 90001)

Hi Gurus,
I properly Configuration Internal Order but FI posting doesnu2019t allowed.
Configuration Internal Order.
1.                   Creation of Order Types(Ex. Internal Order for Telephone), (Nos Range given Internal)
2.     Creation of field status group making cost centre and internal order mandatory
3.     Creation of GL a/c (Telephone or Vehicle Fuel) for FGS-G002(Cost Center & Internal Order)
4.     Creation of internal Orders
5.     Posting of transactions in FI u2013T.code-F.02
Now what I done the mistake clear detail
Thanks & Regards
Selva.

Go to Order change and change the status of Order to "Release" or some thing else that allows fi postings. You can explore "Allowed transactions" to know more.

Charm: User Statuses error "Status is not allowed"

Hello,
We have created some additional statuses for SDHF. When I look at the log in status tab of the record I see the errors
User status ANGE must not be deleted
Status PROC is not allowed (Service Process 742)
The user status 'E0002' must not be set
Status ZUTE is not allowed (Service Process 742)
The user status 'E0004' must not be set
Status Test is not allowed (Service Process 742)
The user status 'E0005' must not be set
Status PROD is not allowed (Service Process 742)
The user status 'E0006' must not be set
Status Conf is not allowed (Service Process 742)
The user status 'E0007' must not be set
Status ABGE is not allowed (Service Process 742)
The user status 'E0008' must not be set
Status REL is not allowed (Service Process 742)
The user status 'E0009' must not be set
Status CANC is not allowed (Service Process 742)
The user status 'E0010' must not be set
Status ZCFS is not allowed (Service Process 742)
The user status 'E0011' must not be set
Status ZFSC is not allowed (Service Process 742)
The user status 'E0012' must not be set
Status ZBPO is not allowed (Service Process 742)
The user status 'E0013' must not be set
Status ZBPA is not allowed (Service Process 742)
The user status 'E0014' must not be set
Status ZCTS is not allowed (Service Process 742)
The user status 'E0015' must not be set
Status ztsc is not allowed (Service Process 742)
The user status 'E0016' must not be set
The help on this shows:
Status Conf is not allowed (Service Process 742)
Message no. BS042
Diagnosis
The user status 'Conf' has reference number 70. In the current object status 'Service Process 742', the reference number of a status may not be higher than 10.
Procedure
You can only set user status whose reference number is not higher than 10.
Anyone know where this value of 10 comes from?
Any idea how this can be fixed?
Regards,

Hi,
Check the Status Profile of SDHF in CRMBS02.
Chk the Lowest and highest value against the Status.
Thnx,
Waseem.

Costing is not allowed for material/PPS status - Message no. CK 399

Hi Experts,
I am getting the following error when doing a costing run via CK11N:
Costing is not allowed for material/PPS status
Message no. CK 399
Diagnosis
Material XXXXXX in plant XXXX has material status Y1. The setting for this status is such that costing cannot be carried out.
Procedure
Check the material status in the costing view and MRP 1 view in the master data record of material XXXXXX in plant XXXX (Field MAT/PPS status)
I have already checked the status of the material in both costing and MRP 1 view via MM03. Plant-Specific Material Status is Y2 (Material productive). I am not sure if the statuses are standard but I hope anyone can advice on the solution if you have encountered this one already.
Thanks,
Josef

Hi Josef,
Please go to OMS4 and check the material plant specific status for Y1 and Y2 for Mat. Cost Estimate Procedure.
Also check components of BOM for plant specific status it should be Y2 for all you components.
One of the materials to be costed has a material/PPS status which does not allow a cost estimate.
CS03 you can check the BOM components and CS12 for multiple BOM explosion.
Regards,
R.Brahmankar

Sys. status :REL not unique in transaction code -- COOIS

Hi expert
   In erp 6.0 , when I run t-code COOIS and choose the sys. status "REL", the system show me the error :Status rel not unique .
And I press F4, there are two REL status in fact. I want to know how to define the sys. status. How can we deal with this
case of this problem? Thank you in advance : )

Dear Liting,
The root cause of the problem is that the status 'REL' is not unique in your system. In transaction BS23, you can see that there are two status with the abbreviation REL: status I0002 (which is the status that is relevant for COOIS) and status I7203 (which belongs to ECM).
The I0002 is the correct one for the 'Release' status of order, and I7203 is for the status of ECM (Engineering change management),
Since the status 'REL' is not unique, note 1257156 causes the error message COIS 054 and enforces the use of F4. Of course, there is no error if you use F4 directly, because the user is already using F4.
In order to solve the issue, please use transaction BS22 and change the status text of status I7203 from 'REL' to 'RELZ' or to 'Rel' (Lower case). Save and add the change to a transport request.
After this, status REL should be unique once more and message COIS 054 should no longer appear.
I hope this could be helpful.
Regards,
Tibor

Message no. BS007-Goods receipt for purchase order not allowed

Hello SAP Experts,
I have created an internal order to collect expense within the order.
When I tried to reverse an GR against the PO created with the internal order assigned, the following Error occured.
"Goods receipt for purch. order" is not allowed (ORD 145116170204)
Message no. BS007
Diagnosis
The current status of object 'ORD 145116180204' prohibits business transaction 'Goods receipt for purch. order'.
Procedure
To process business transaction 'Goods receipt for purch. order', you first have to change the status of object 'ORD 145116170204' to allow the transaction 'Goods receipt for purch. order'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
The order was previous TECOed, and change it's status to Release, but still have the error.
Please give possible solutions. Thank you in advance.
Regards,
Steven Lin

Hi Br. Ajay M,
Released the order and Status line as follow
REL AVAC BUDG GMPS
but the error changed while reverse the document
item 0001 Order is invalid.
Many thanks for your kindly reply.
regards,
Steven

GR for PO is not allowed

Hello
Iam have done one scheduling agreement with Subcontracting,
Child components are full stock no problem send to components provided to vendor.
afterthat i have done MIGO with recepct to SA and in MIGO screen iahve changed the Quantity and did the MIGO... The material document is created
when i want to cancell the materail doc. system will gives me below error
"Goods receipt for purch. order" is not allowed (ORD 1000605)
Message no. BS007
Diagnosis
The current status of object 'ORD 1000605' prohibits business transaction 'Goods receipt for purch. order'.
Procedure
To process business transaction 'Goods receipt for purch. order', you first have to change the status of object 'ORD 1000605' to allow the transaction 'Goods receipt for purch. order'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
Transaction analysis

Hi,
Please go the tcode CO02 and click on functions and select the restrict processingand click on unlock
the reason may be tht some might have locked the produvtion order ,
hopw it wud have answered ur question.
rewards if it is useful
Shawn

Status Rel is not allowed (ORD 301343)

Similar Messages

Maybe you are looking for