Step input key commands active all the time - really annoying

In Logic X, I'm experiencing a problem where the step input key commands are overriding the global key commands, even when the step input window is not open.
For example, when I'm looking at the main Logic window, with the step input window closed:
-I press the space bar, and the playhead advances one division value
-I press the T to change the tool, and it creates a region and puts a tiny F# there (!!)
-I press Y to open/close the library, and it creates a region and puts a G# there.
The only way around it right now is to edit my key commands and delete all step input commands that are getting in the way of the more universal ones.
Has anyone else encountered this?

Yes, I am. 
Actually, I haven't even really been using the step window.  The problem seemed to start out of nowhere, and I noticed by looking through the "Edit key commands" window (opt-K), that what Logic was doing was using all the step input key commands instead of the global commands.
The Art Of Sound wrote:
Just to double check.. You are clicking on the Arrange window to bring the focus to that window yes. after you closed the step window?

Similar Messages

  • Satellite L655-11J - Hard disk activity all the time

    Toshiba please I need help
    The first run of my laptop I entered my location my name and a password, I install Toshiba updates and Windows 7 updates (the notifications I got) then I noticed the hard drive is active all the time and the laptop is very slow. I tried a lot to restore the original Toshiba image the built in the laptop and I finally did it thinking maybe I did something wrong
    The hard disk drive still always active (don't know what reading or writing) no monitoring for any activity the laptop very slow and lot of seeking sounds.
    any solution please, I got this problem the first use of it :(

    I know it has a guarantee and they will replace it for free, but it was a gift from Saudi Arabia, I'm now in Syria :( I've to wait until on of my relative go back there :D
    I went to Toshiba in Syria they charge my 7 $ to tell me the hard is defective although I knew it was so, and I will need to pay 100$ for a replacement so I will wait ;)
    thanks all, it was my mistake, it is just I noticed the HDD light always on in windows 7 and it was not on in USB Linux so I thought it was a system problem, I didn't have much time to work on it and make tests :D
    I'm sorry again

  • How to keep the save-button active all the time?

    Hi!
    I'm using mobile sales 4.0.
    On a tile i've only fixed questions and combo boxes with yes and no ...
    When i write manually a "yes" in the combo box field the save button is active - When i use the combo box with a mouse click the save-button isn't active.
    What are the settings i've to do to keep the save-button active all the time?
    Thanks a lot in advance.
    Best regards,
    Ingo

    Hi Ingo,
    If your combobox is a bound control, then when you change a value in it, the save button should be enabled. Strange. But anyway, you can do this.
    In the <b>combobox_OnValueChanged2</b> event, make a call to makeDirty method in the tile:
    If boundAttributeChanged Then
         <b>anchorthatyourcombotiedto</b>.bo.MakeDirty True
    End If
    This will make the Save button enabled.
    Regards, Vadim.

  • Make audio (optical) port active all the time

    Well, as my topic says... Is there anyway to make the optical audio port active all the time while I have the connector inserted?
    My issue is that it shuts down when I don't play any music/video on my MBP and my reciever doesn't recive a signal, in that way it makes a humming sound...
    Very annoying.
    Any idea?

    Hello MrDanne,
    No, you cannot make the optical audio port active 'all the time' for when your Mac is shutdown, this includes the all internal electrical circuits (besides your power unit) thus the port cannot be active.
    The humming sound is known as distortion, this occurs because there is an un-avoidable interference caused by particles when there is no signal communicated through the cable.
    When you shut down your MBP, you should also turn off the receiver.

  • Fan activated all the time...

    Hi,
    I'm just updated the lastest Leapard update...after that,the Fan (coolant) started activate all the time...no matter when i turn on my MacBook...the fan automatically spin and non-stop..for that..caused my battery usesage...
    What's happening?is it the bugs of MacBook?

    I sort of have the same problem - the CPU get really hot and starts to make a lot of fan noise.
    I downloaded iCyclone to control the speed and temp, and I noticed that only one of my fans were running (Fan1) (are there even two fans?) and the right side got cold while the left side kept being hot. - Does anyone know if there should only be one?
    Anyways iCyclone helped speed down the fan and make (the right side of) the CPU cool down - and lot faster than usual...

  • Strange HDD behavior, activity all the time?

    Hi,
    I just reinstalled arch on my tp x23 on a new seagate momentus hard drive. The installation went fine and I must say I'm very pleased with the performance so far.. except for the fact that the hard drive is almost constantly doing something and I have no idea what it is? The activity led turns off only to turn back on in a while.
    Any ideas?
    Sakari

    Zer0 wrote:
    Hmm now that you mention power saving features.. I wonder if it's the hard drive going in "sleep mode" when theres little/no activity and the HDD LED lights up during spin down and spin up..  Maybe check the BIOS and disable the hard drive powerdown crap or change the timeframe.. if it works then you know where the problem lies..
    then again you are on a laptop so I'm not sure the solution outweighs the LED problem (as spinning down the hard drive will help prolong your battery life)
    It sure seems to be something like that. I also fount this thread which is (was) discussing the issue, but didn't really find a solution. Anyway, I know now what the probable cause is and if I want to change the behavior one day, I know how to do it. So a lesson learned, great!
    About the battery, I actually don't even have one at the moment, so I'm always AC-powered. But I think I'll get back to this one once I get a new battery and have a chance to test different settings. What I don't understand is that my system seems to run cooler now the power saving is turned off or at least as cool without the fan blowing all of my papers off the table Maybe it's a bug in the hd's firmware, don't know? It seems like the heads won't park properly and keep on going on and off.. That would explain the constantly lit activity led.

  • I have an iPhone 5 right now.. But the wifi does't say active all the time. It would be on for a while, then disconnect. My power button also doesn't work at times.Sometimes it wakes up the screen, but only when I press it on one side.

    I was also wondering if I could take this to the apple store to get it fixed. If not get it replaced?

    If you arrive without an appointment and all appointments that were available at that time and following that time are booked and there are no no-shows with any of the apointments, you will be out of luck. You might get lucky with no appointment scheduled at that time you arrive and there are no other walk-ins without an appointment in front of you, but best to schedule an appointment.

  • Location services - is this active all the time??

    I was wondering whether anyone new if location service in the iPhone 3g is constantly on in the back ground? If it is does it drain battery??
    Hopefully this only starts when an app that requires it fires up.

    No, it's only active when you launch an app that uses it (Maps, Camera, downloaded Apps like Where, Loopt, etc.).
    Turning it OFF in Settings > General will result in a pop-up dialog requesting permission when an App needs it, and that will also turn Location Services back ON in settings.

  • Left alt key not working all the time

    the left alt key seems to be intermittent on versions of windows vista and above using a MS wireless keyboard
    I don't know about you but the left alt key is very important in my workflow and it works intermittently
    It seems to be something with the driver and the person at MS on the phone said it was a driver issue and he had no idea who to send it to.
    Removing the "NEW" mouse and keyboard drivers seemed to have worked but not really
    Only solution so far is not to buy MS hardware

    Hi,
    According to your description, it seems like a hardware problem, it would be better to contact Microsoft hardware support:
    Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more:
    http://support.microsoft.com/ph/7746
    Thanks for your understanding!
    Roger Lu
    TechNet Community Support

  • Keyboard globe key not responsive all the time

    Sometimes when trying to switch language it makes sound and pushed (globe key) but it does nothing.
    Need to click again to actually make the keyboard switch.

    Hi,
    According to your description, it seems like a hardware problem, it would be better to contact Microsoft hardware support:
    Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more:
    http://support.microsoft.com/ph/7746
    Thanks for your understanding!
    Roger Lu
    TechNet Community Support

  • Storm 2 9550 with BMW - Bluetooth stays active all the time

    I changed my phone recently and bought a Storm 2 9550. My old Verizon phone (Motorola Z60) used to work with my car without any problems.
    At first, I didn't have any problems with the new phone while on my car's Bluetooth. However, after activating my phone with the company e-mail functions, the Bluetooth is a nightmare. As soon as it is activated, it stays activated even thought am not talking to anyone and turn the car radio off. I can't change channels on the radio, because the Bluetooth is always active.
    It can't be a problem with the car as it used to work with my other phone. Something happened when I start to get my company e-mails on the phone.
    As soon as I am done with my phone call, I have to disable the Bluetooth otherwise it drains the battery as it stays connected.
    I did unpair and re-pair stuff... Is there a solution to this?
    Zack04

    Delete CleanMyMac2.  You do not need it and may be a contributing reason for your problem.
    Check Activity Monitor for applications that may be using a lot of CPU resources:
    http://support.apple.com/en-us/HT203184
    Run an Apple Hardware Test:
    http://support.apple.com/en-us/HT201257
    Note that an error free AHT is not definitive.
    You also might test the MBP with the original RAM module in place of the 8GB module you installed.  There may be compatibility issues.
    Ciao.

  • MBP Retina: fan active all the time - is it normal ?

    I switch on my MBP retina and from the very beginning an audible fan starts, although the laptop itself is very cold and there is nothing else than Safari going on. Is it normal ?

    It's normal for the fans to run at about 2,000rpms but you shouldn't be 'hearing' them at that point. It 'sounds' as if your fans are really pumping if you're able to hear them (when my fans rev up to the 3,500+rpms state, I can hear them, but otherwise they're quiet).
    Download iStat Menus (available for a free trial but worth every penny for me) and see how high your fans are running and how hot your MBP is running. Call back with that info.
    Clinton

  • Ctrl is pressed all the time in Photoshop

    Sometimes Photoshop thinks the Ctrl key is pressed all the time. This prevents me from doing most of the stuff you want to do without Ctrl.
    Currently happening on Photoshop CS5 12.0.4/Mac OS 10.6.7. But I had this issue for about half a year with Photoshop CS2 and Mac OS 10.6.x.
    Restarting Photoshop does not help. The only way out is restating Mac OS. This does not effect other applications.
    I had this issue right after booting and also after doing a lot of other stuff.
    I’m using a Wacom tablet and an Apple wireless keyboard—which may send keyboard signals.
    Any idea?

    Currently happening on Photoshop CS5 12.0.4/Mac OS 10.6.7
    Absolutely sure on that OS version? Symptom is very similar to an OS 10.6.5 -10.6.6 Apple bug.

  • Hi my iphone 5 has started recently to operate voice control all the time

    why is my voice control activated all the time?

    Have you jailbroken the iPhone? If so, you will need to restore it to factory defaults to undo the jailbreak, and then never jailbreak it again.
    If it's not jailbroken, there is no known malware capable of infecting it. So the problem lies somewhere else. Convincing your carrier that it's not a virus, and is a problem somewhere with their system, will likely be difficult. You may need to restore it to factory defaults to get them to pay attention, and even then they may fall back on some nonsensical argument about malware in your phone's firmware in order to dodge their responsibility.
    If I had to guess, I'd say that someone is probably spoofing your phone number when sending texts. Your carrier ought to be able to track that down, if you can convince them to try.

  • Short key for copy does not work all the time now.

    After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time.  It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac.  Please help.

    I've plugged in my default mac keyboard and the short key copy still does not work.

Maybe you are looking for