Steps to setup MML on veritas Netbackup to perform rman restore from tape

RMAN backup is taken to tape...
can anyone please give the steps to setup the MML on veritas Netbackup ...
and also the steps to perform rman restore from tape to a new server ....
Thanks in advance

can u please answer them ..
1)how to find out that the which tape is mounted on a backup server ?? command please ....
2)how to find out that the rman backup was successful on the tape ?
3)how to find out what are the tapes involved in that backup ?
4)do u have to the create a auxillary database while restoring from rman by tape to a new server ?
5)is there a way to findout how many GB completed in x timeframe by RMAN on oracle 11.2.0.2/10g and and oracle 9i during the backup process ??
and also please answer ...
#)RMAN backup is taken to tape...
can anyone please give the steps to setup the MML on veritas Netbackup ...
and also the steps to perform rman restore from tape to a new server ....
and
#)--- can i know the steps for the MML
CATALOG command to define new locations
----May i know the commands

Similar Messages

Netbackup related parameters when restoring from tape to a different server

Db version: 11.2.0.2 / Solaris 10
Media Management layer : Symantec Netbackup v7
Production server : qualmh214
Prod DB Name : NEHPROD
We take backup of our prod database using a script similair to the below
run
     ALLOCATE CHANNEL c1 TYPE 'SBT_TAPE';
     SEND 'NB_ORA_CLIENT=qualmh214,NB_ORA_POLICY=qualmh214_rman, NB_ORA_SERV=hlsngt238, NB_ORA_SCHED=Weekly';
     backup incremental level 0 database tag='NEHPROD_full' plus archivelog ;
     backup format 'NEHPROD_%d_%U_%t.rbk' ;
}We have a test server :
dreyth169Every week we need to Clone the above Prod DB from its latest Level 0 Backup stored in Tape.
We have installed Symantec netbackup on our test server.
To restore using RMAN, in run block for the restore, shouldn't NB_ORA_CLIENT be the test server name dreyth169 ? ie. If we keep NB_ORA_CLIENT=qualmh214 (Prod server), then RMAN will do the restore in the PROD !!! Right? That would be a disaster.
What about NB_ORA_POLICY for test server ? Should I create new policy NB_ORA_POLICY for my test server ?

Hello;
Yes, for example if you were doing an RMAN duplicate you would set it to : ( very similar operation )
NB_ORA_CLIENT=target_server
Should I create new policy NB_ORA_POLICY for my test server ?
That's the way I would do it. It may work without it however.
Since you are using oracle 11.2 another option is "Active Database duplication" If your database isn't too large and you have decent network speed and some off peak time once a week I would consider this.
I've used this with great success and you can script it fairly easy in Unix/Linux. If the Remote Host has the Same Directory Structure this get even easier. With a couple of INIT files and a clean up script on the remote this becomes a cookie cutter. Since the job would run from the remote you can avoid RMAN conflicts with your backups.
http://docs.oracle.com/cd/E11882_01/backup.112/e10643/rcmsynta020.htm
Best Regards
mseberg
Edited by: mseberg on Jun 25, 2012 2:50 PM

Steps to restore RMAN backups from tape to disk

Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

I setup a new iPad air and did a restore from iCloud and only part of my camera roll downloaded?

I setup a new iPad air and did a restore from iCloud and only part of my camera roll downloaded?

Welcome to the Apple Community Xena1940.
When you restore from back up, the process will restore the OS and some initial data, it will then restart and allow you to use your device while the remaining data is downloaded and restored in the background. have you allowed enough time for this to complete.

Just setup a new i phone 6 if I restore from Itunes will I loose what I have already setup

Just setup a new ipone 6 if I restore from Itunes will I loose what I have already setup

Hello maspeds45
When you remove iTunes, you are just removing the software; the media files still remain in place. Just follow the steps in the article below to remove iTunes from your computer if you are on Windows. If you are a Mac, just download the install file and it will reinstall the software for you.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iTunes 11.1.3
http://support.apple.com/kb/dl1614
Regards,
-Norm G.

RMAN Restoration from MML

Hi All,
We have configured MML and uses RMAN to backup database using specified channels. Control file and SPfile backup also goes at tape.
Now my question is if we want to recover our backup or prepare a new instace with that backup, how can we restore our parameter file
from Tape and startup the Instance. Also how can we restore the control file backup. Kindly note that we are using control file as backup
repository not the Recovery Catalog.
Regards,
Abbasi.

Abbasi,
I wonder why you never consult documentation prior to visiting this forum.
You would definitely have found the answer.
As you also forgot to specify your database version, I can not act as a free lookup service for you.
Can you please inform me when you are going to stop your ongoing abuse of this forum?
Thank you in advance.
Others: please do not respond to this question, encouraging Abbasi to remain lazy and to continue his abuse.
Sybrand Bakker
Senior Oracle DBA
Edited by: sybrand_b on 29-sep-2011 18:11

HT4137 i have purchase another family ipad do I restore from backup or setup as a new ipad

I have purchased another family iPad. When I setup do I restore from the backup of our other iPad or set the new one up as a new iPad?

if you want all your apps and data on the new iPad from your old one, choose Restore from update. If don't want to and don't apps and your data on it, choose setup as new iPad.
If you choose Restore from backup:
You will be asked to restore backup from iCloud or from your iTunes library.
If you choose to restore it from iTunes library, connect it to your computer and open iTunes. Right click your iPad icon on devices lost and choose Restore. Choose the back up you want To restore it, and it should be restoring.
If you choose iCloud, you will be asked to sign in your iCloud account. Choose the backup you want, and it should be restoring.

Storedge c2 tape autoloader not detected in veritas netbackup 6.5

Hi,
I am facing the below problem
storedge c2 tape autoloader not detected in veritas netbackup 6.5
#modinfo | grep sg
shows sgen driver
#mt -f /dev/rmt/1 status shows the HP LTO media when tape is loaded in the drive
# cfgadm -a
shows bot the drive and the changer
but when i try to detect the same in veritas netbackup, it says no removeable drives found
Any helps would be highly apreciated
thanks in advance

Hello,
Netbackup cannot see the devices if sg driver is not loaded.
Once you installed the veritas netbackup, do the following steps to properly load the sg driver.
To Load the drivers.
1. cd /usr/openv/volmgr/bin/driver //You should change to this directory before doing the following steps
2.     /usr/openv/volmgr/bin/sg.build all -mt 15 -ml 1
3.     cp pr /kernel/drv/sg.conf /kernel/drv/sg.conf.bak
4.     rm -f /kernel/drv/sg.conf
5.     /usr/openv/volmgr/bin/driver/sg.install
6.     modinfo | grep sg
7.     /usr/openv/volmgr/bin/sgscan // To verify
Thanks,
Sal.

Backup MaxDB 7.7.06.09 to Veritas Netbackup 6.5 fails

We want to backup MaxDB to Veritas Netbackup server.
According documentation found about this topic the backup is configured
by creating 3 files: bsi.env, initWDO.par (for backint for MaxDB) and
initWDO.utl (for backint for Oracle). The contents of these files are shown below.
When running the backup, it seems that backint for MaxDB ends with return code 2,
the error message received is:
-24920,ERR_BACKUPOP: backup operation was unsuccessful
The backup tool failed with 2 as sum of exit codes.
Unfortunately no further errors/warnings are shown that points in any direction
what's going wrong here.
We start the backup via the following dbmcli-command:
dbmcli -u control,****** -d WDO -uUTL control,****** backup_start BACKData_WDO
(for the time being without xuser entries, first make sure the backup is ok)
The files dbm.ebl, dbm.prt and several others do not show any additional details/hints.
It seems as if the "save data quick" to the named pipe is ok, the sql-code returns "0".
After this the backint for MaxDB should read the named pipe and write it to stage-files,
but backint (for MaxDB) ends with return code 2.
Any idea what might go wrong here?
With kind regards,
R. Hoogeveen
The Netherlands
File bsi.env:
=========
BACKINT                /sapdb/WDO/db/bin/backint
INPUT                  /tmp/backint4maxdb_WDO.in
OUTPUT                 /tmp/backint4maxdb_WDO.out
ERROROUTPUT            /tmp/backint4maxdb_WDO.err
PARAMETERFILE          /sapdb/data/wrk/WDO/initWDO.par
TIMEOUT_SUCCESS        600
TIMEOUT_FAILURE        300
ORIGINAL_RUNDIRECTORY /sapdb/data/wrk/WDO
File initWDO.par:
=============
STAGING AREA:                  /tmp/stageWDO 1 GB
FILES PER BACKINT CALL:        1
BACKINT:                       /usr/openv/netbackup/bin/backint
PARAMETERFILE OF BACKINT:      /sapdb/data/wrk/WDO/initWDO.utl
HISTORY FILE:                  /sapdb/data/wrk/WDO/backint_history_WDO.log
INPUTFILE FOR BACKINT:         /tmp/backint4ora_WDO.in
OUTPUTFILE FOR BACKINT:        /tmp/backint4ora_WDO.out
ERRORFILE FOR BACKINT:         /tmp/backint4ora_WDO.err
MAXIMAL DELAY OF BACKINT CALL: 30
File initWDO.utl:
=============
switch_list /tmp/.switch_WDO.lis
switch_sem /tmp/.switch_WDO.sem
switch_log /tmp/.switch_WDO.log
drives 1
client wdocsz01
server backfire
policy sap_WDO

Lars,
The /tmp/backint4maxdb.err file tells me:
Backint for Oracle was unsuccessful.
(Unfortunately that was all information in this file.)
The backint4ora.in file tells me:
/tmp/stageWDO.0
(looks ok to me, also at the time backint4ora was started the stage file was created with non-zero size)
The backint4ora.out file tells me:
ERROR: incorrect format or option in .utl file (-p)
(this seems as if the -p option is not recognized by the backint4ora executable)
When I run this executable manually as user sdb it shows me the commandline that I should use, including the -p option.
One strange thing I notice is that the order of the options is different from the commandline that is executed.
(in the usage it shows -p as almost last parameter, the command executed has -p in the middle; I will see if I can execute the backint4ora command manually, since I have the stage file available, I have copied it during the process)
The backint4ora.err file is empty.
The commandline of the dbmcli command I execute shows me another interesting error message,
this might also be the source of all problems here.
-24920,ERR_BACKUPOP: backup operation was unsuccessful
Could not get external backup ID's from the backup tool.
I tried to retrieve the external backup id's manually for medium BACKDataWDO, it show me OK without any external backup id's.
I am not sure, but I think this is correct since no successfull backup was created yet with external backup tool.
Can it also be that the parameter "history file" from the initWDO.par file is set wrong?
Currently it is set to "/sapdb/data/wrk/WDO/backint_history_WDO.log" (see above also), but I can imagine
that this should be set to the dbm.knl or dbm.ebf file ??
With kind regards,
Roger Hoogeveen

Steps and setup for Creation of Project Contract from Scratch

Dear All,
Steps and setup how to create contract from oracle project contracts?
Thanks
HNP
Edited by: user12197222 on Aug 1, 2012 1:30 AM

Please refer Ch 2 Creating New Contract Documents on below link from user guide:
http://docs.oracle.com/cd/B11454_01/11.5.9/acrobat/115okeug.pdf
thanks

Veritas Netbackup Client Installed on Solaris 10 Zone Unable to Work

Hi
I am having problems with Veritas Netbackup client which had been installed on a Solaris 10 zone only. We are using Veritas Netbackup server which is installed on a Windows 2000 server and the NBU server is unable to add the new client for backup.
The way I installed the NBU client was using the manual method where I installed directly on the zone. The zone I've created is a full root zone and the installation seems to be successful.
Somehow the NBU server just can't see the new client. Do I need to install the client in the global zone to make it work? Is there any checks I can do to make sure I have installed the client correctly and that the services are running in the solaris 10 zone side? Any kind of help would be much appreciated.
Thanks
Xavier

Hi mcbrune1
I've check on the services in the client and all 4 services were up and running. Than I realized that this client was hardened a few weeks back. So I checked on the /etc/hosts.allow file and added an entry to allow the Master server to communicate using bpcd.
Now the Master server is able to see the client and everything seems to be working. Thanks for your help.
Cheers

Veritas Netbackup Client 6 for Solaris 10

Hi
Can anyone tell me where I can download Veritas Netbackup client for Solaris 10. We had the netbackup client for solaris 9 running but then we did a clean install of Solaris 10.
The netbackup server is running on an AIX server and I want to push the solaris client from there. We have separate license for all our clients running the netbackup agent but the netbackup server does not have the latest solaris 10 client. The AIX server do not have internet access, so I want to download the solaris 10 netback agent and put on the netbackup server.
Need to know the URL where I can download the netbackup agent for Solaris 10.
Many Thanks
Pioneer

Hi mcbrune1
I've check on the services in the client and all 4 services were up and running. Than I realized that this client was hardened a few weeks back. So I checked on the /etc/hosts.allow file and added an entry to allow the Master server to communicate using bpcd.
Now the Master server is able to see the client and everything seems to be working. Thanks for your help.
Cheers

What are the steps to setup an HTTP Session replication clustering in oc4j9

what are the steps to setup an HTTP Session replication clustering in oc4j9.0.5

Are you sure you have the correct version number for OC4J? Is this a standalone OC4J instance, if it then the steps involved are different from the full stack. Please check the Higher Availibility guide in the documentation on OTN.
Deepak

Steps to setup JDeveloper 9i to modify and test the iPayment servlets

Hi,
I am working on modification to iPayments module of EBS Release 11.5.9. We need to modfiy part of code in Paymentech BEP (Back End Payment) servlet.
Could anyone please let me know the steps to setup JDeveloper 9i to modify the servlet code, test and debug the changes from JDeveloper. It would be really helpful if you could point me to some document which has the details of the process.
Appreciate your help.
Thanks,
Navadeep

Navadeep,
Short answer: I don't have such a document, nor do I know where to find one.
Since most of the people who regularly monitor and post to this forum don't work with the E-Business suite (at least not iPayment) - I don't feel you'll get a good response here. I hope someone can prove me wrong. The best place to find this information is the E-Business Suite forums or perhaps Metalink.
Furthermore, I don't believe that Oracle supports modifying the supplied iPayment servlets. So, I think Metalink is the right place for you to start.
John

Steps to setup descriptive flexfield or/and key flexfield.

Where can i find white paper or document other than the user guide in metalink or any other source which talks about steps to setup a descriptive flexfield or/and key flexfield.

Hi,
You might wanna check out following documentation.
http://download-east.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/flexnav.htm#contentsFX

Steps to setup MML on veritas Netbackup to perform rman restore from tape

Similar Messages

Maybe you are looking for