Still waiting for the Hinge for the laptop for more than a Month

Hi There,
I am writing this mail to let you know that I am very disappointed with HP regarding my laptop that I gave to the authorized HP repairer(Telefix,260 south road,hilton,sa 5033) in Adelaide.Its been more than a month now and every 2nd day I am calling the repairs to let me know the status of the laptop(for the repalcement of the hinge) and everytime I hear from them that they would be able to repair it by the end of the week for last 3 weeks.I called them today as well and I get to hear the same story and they said that they are still waitng on part from HP.
So can you please expedite the delivery of it as my work is really suffering in absence of my laptop.
My Hp model # DV6700.

This is a user to user forum, not much we can do for you, sorry to hear about the problems you are having.

Similar Messages

My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for mo

My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?

You said "reset," so Meg assumed that's what you did. But "reset" is not a button; to reset the phone you must hold the HOME and SLEEP buttons at the same time until an Apple logo appears. You may have to hold for up to 30 seconds, and if the battery was completely drained, you will have to restore iOS using iTunes on your computer.

I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working. It has not worked for anybody who bought it. How can I get my money back?

I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working. It has not worked for anybody who bought it. Why is it off of the app store now and how do I get my money back?

That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod

I've already changed email for my apple id more than 6 months. But 2-3 months ago until now I've recieved and email to ask apple id confirmation from me. I never confirm anything because I don't know,the link's attached, it's legal or illegal.

Dear Apple support team,
I've already changed email for my apple id more than 6 months. But 2-3 months ago until now I've recieved and email to ask my apple id confirmation from me about 6-8 emails. I never confirm anything because I don't know,the link's attached, it's legal or illegal.
The latest link (just be sent to my email 1 hr. ago) : http://www.smartpixeladv.com/proma/Login/index.html
Text is:
Dear Customer,
We recently noticed an unusual activity in your iTunes account. Please complete the process to confirm your
informations.
Confirm Now>
This link will expire three days after this email was sent.
If you don’t make this request, your account will be blocked for security reasons.
Apple Support
In my opinion, i think "http://" should be "https://" right? Or Apple should show the link on your website that we can find, re- check and click by ourselve. Or Apple should do "How to confirm apple id" on your main page. ( in fact i'm not sure you already done "How to" on your website yes or not, because I cannot find it)
The apple id is sensitive security, it's concerned personal security and any credit card payment so please understand me that's why i must to interrupt your team to help me to solve this problem. I'm scared my account will be blocked. Please advice me.
Wassa. (BKK)

It is a phishing attempt to get your Apple ID and Password.
You should forward it to Apple : [email protected]

Calendars to List for more than 12 months? With advanced selection the Listing will go back farther than 12 months but will then disappear!

How do you get Ical to List for more than 12 months on your Ipad? I have used Advanced settings which accomplish this but the Listing disappear overnight!

Hi Kaorin
I was charged £75 last month for broadband, calls, and TV - we have unlimited so cannot be charged any extra, and have never used the phone.
It's shocking - we too were 'enticed' by a discount, which really didn't mean anything...
Hope you get the issue's sorted. Feel free to post on my forum post in my signature.
Please see my story:
http://community.bt.com/t5/Bills-Call-Packages/Taken-to-the-Ombudsman-Service-My-story-with-BT/td-p/211003

No home phone service for more than two months

I am sending this note on behalf of my mother. She has been waiting for technical services to her home phone for more than two months. She has received dates where a technician would come out to repair her services in which she has left work early or stayed home on weekends no avail. My mom is not in best health and has a child with disabilities living in the home and it is imperative that her services are working. It is frustrating to her to pay for a service she's not receiving. This is the worst customer service experience from Verizon.
I am asking for immediate resolve to this issue and to work with us to assure payment for time where phone has not worked Will not be charged to her account. Please contact me {edited for privacy}.

Hi lmatthews522,
Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

Favour - Anyone who has run 10.2.0.1-2 on linux for more than 3 months?

If you have 10.2.0.1 or 2, on linux and you have a user that is more than three months old, can you please do me a favour:
login with your user that is 3 months old
set it up with at least 2 email addresses
setup a typical 2 week schedule for an out of hours user as follows
Week 1:
mon 12:00am - 8am EMAIL ADDRESS 1
mon 6pm - 12am EMAIL ADDRESS 2
tue - fri 12:00am - 8am, 6pm - 12am EMAIL ADDRESS 2
Sat - sun all day EMAIL ADDRESS 2
Week 2:
mon 12:00am - 8am EMAIL ADDRESS 2
mon 6pm - 12am EMAIL ADDRESS 1
tue - fri 12:00am - 8am, 6pm - 12am EMAIL ADDRESS 1
Sat - sun all day EMAIL ADDRESS 1
Now when you view the schedule, does monday display correctly? In my case, the wrong email address is displayed for monday, yet when you edit the schedule it shows correctly. Had this SR open with oracle since March, and now they are refusing to do anything else on it.
It only manifests itself on old users, a brand new user works perfectly. I have the same problem on my live 10.2.0.1 grid and my test 10.2.0.2 grid systems.
If you have the time to try it out ( i know its a minor thing), I'd appreciate it.
Bazza
Message was edited by:
bazzza

Bear in mind the SR was raised in March this year.
I've demonstrated the problem at 10.2.0.1, they asked me to upgrade to 10.2.0.2, so I did. Still had the issue, so I demo'ed it again for them. A newly created user does not exhibit the issue. I argued this wasn't a workaround, as all rules, UDMS etc would have to somehow migrated to the new user. A lengthy manual task, plus, a few months down the line I'm not guaranteed that I won't have the same issue again. So they raised a bug (5337476). Then they asked for a copy of the repository which I gave them. Two days after supplying the export, they want me to set up a brand new environment, to replicate the issue from scratch. I lost what little patience I had, arguing if I don't know what caused the issue, how can I be expected to replicate it? The fact I have the problem on two separate grid systems, on more than one user on each system, is stunning evidence of a problem.
Oracle keep trying to fob me off, if someone else is also experiencing the same issue it would serve as some desparately needed ammo!
Bazza

HBO 3D hasn't updated for more than 3 months.

Since the last time acunningham453 ask here, my HBO 3D list hasn't been updated. It's more than 3 months, and still the same old movies. Do you know if HBO/Comcast abandon all 3D?

vucuong7276 wrote:
Since the last time acunningham453 ask here, my HBO 3D list hasn't been updated. It's more than 3 months, and still the same old movies. Do you know if HBO/Comcast abandon all 3D?
Apologies. I am checking with our On Demand team now and will provide an update. Thanks for your patience.

VERIZON CHANGED HIGH SPEED DSL AT CENTRAL OFFICE AFTER I HAD 7.840 MBPS FOR MORE THAN 10 MONTHS!!!

ALL OF THE SUDDEN VERIZON DECIDES IN LATE APRIL THAT I SHOULD HAVE 7.1 MBPS INSTEAD OF THE 7.840 MBPS I HAVE BEEN HAVING FOR MORE THAN 10 MONTHS. AS A MATTER OF FACT, AFTER A LOT OF DISCONNECTIONS SUFFERED IN MARCH/APRIL 2012 BECAUSE VERIZON WAS DOING SOMETHING IN THEIR CENTRAL OFFICE WITHOUT TELLING TO THEIR CUSTOMERS, AND HAVING TO REPLACE ALL OF THE DSL FILTERS, AND TWO MODEMS... I GOT THE D-LINK WORKING AT 7.840 MBPS. AS A MATTER OF FACT, VERIZON TECHNICIAN CAME TO MY HOME AND WE DID INSTALL THE NEW MODEM AT THAT VERY SPEED, WHICH WAS AGREED MORE THAN 1 YEAR AGO AFTER DOING A LOT OF TESTING TO ENSURE THE STABILITY IN THE CONNECTION. ALL OF THE SUDDEN, AFTER THE 20-DAY HONEYMOON WITH MY NEW MODEM, I NOTICED THAT MY SPEED WAS NOT THE SAME, AND FOUND OUT THAT THE IP WAS CHANGED AND THE SPEED SETTING DROPPED TO 7.1 MBPS. NOW VERIZON CLAIMS THAT MY CONTRACT WAS FOR A MAXIMUM OF 7.1 MBPS WHICH IS NOT TRUE BECAUSE I WAS IN THE 7-15 MBPS RANGE!!! AS A MATTER OF FACT I COULD GO EVEN OVER 8 MBPS BUT BECAUSE OF MY LOCATION, RELATIVELY FAR AWAY FROM THE CENTRAL OFFICE AND AFTER A LOT OF TESTING, 7.840 MBPS WAS THE MOST CONVENIENT SPEED. VERIZON CHANGES THEIR POLICIES NOT NOTIFYING THE CUSTOMERS, THEY DO WORK INTERRUPTING THE SERVICE WITHOUT NOTIFYING. I AM GOING TO WAIT AND SEE WHAT THEY DO IN THIS CASE. IF THIS IS NOT SOLVED PROPERLY... GOOD BYE VERIZON, AND HELLO TIME WARNER CABLE!!! SO, VERIZON BE PREPARED TO LOSE ANOTHER LOYAL CUSTOMER FOR MORE THAN 9 YEARS!!! THAT IS THE PROBLEM WITH VERIZON, THEY ARE SO DEDICATED TO GET NEW CUSTOMERS THAT FORGET ABOUT THEIR OLD LOYAL ONES... UNFORTUNATELY, THERE ARE CONSEQUENCES... AND THOSE ARE THAT YOU WILL LOSE THE OLD ONES SOON BECAUSE YOUR LACK OF CARE ABOUT THEM!!! ONCE YOU ARE HOOKED WITH VERIZON, THEY THINK THEY GOTCHA FOREVER... LET'S WAIT AND SEE...

Believe or not... That 20% does make a difference... In one of my games, I used to have 5.3 secs of response time, now it does not lower from 7.8. By the way, even my PC worked faster when I had that little higher speed... I know the changes were done without my knowledge because for a period of 2 weeks I got lot of unstability in my connection that I never got for years before... After 20 days with the first IP assigned to the new modem, the speed dropped like Verizon was running a program to levelize such an speed.
At the end, what really bothers me, is that the 7.840 Mbps was a speed agreed with Verizon, their technicians, their supervisors at the CO, and it was fully documented, and all of the sudden because an "internal change in their policies" that agreement was broken... I am currently making arrangements to have FIOS installed at home, subject to an scouting visit from Verizon to evaluate the feasibility of its installation according to my internal wiring limitations. I have to give them a try... No doubt that it would me cheaper and much faster than the high speed enhanced internet connection that I currently have. Let's wait and see...
Thank you for your interest in my case and observations made too.

How to close open POs which are open for more than two month

I am new to MM please somebody help me with this
Thank you

there is NO STD SAP program which will help u closing the open PO (more than two months)
you need to go each and every PO and mark it as Del completed (item level in deleivery tab)
but this is only stastestical indicator. System wont stop you creating further GR against such PO if any Qty leftout.
for example - PO order 10EA, you recd 8EA and marked the indicator , still you can make the GR for 2EA
there is SPRO setting as well to mark the PO as delivery completed once PO Qty and MIGO QTy is equal or with some variance . but this will work on real time
Another way to set the final invoice indicator in invoice tab
system will allow you to post the further invoices but all be blocked.
somebody need to go and verify the blocked invoices and take necessary action
This is again a manual activity, there is no such STD setting or T code exist
Another way is you can create a program with the help of abaper
built a logic on date / QTy and Amount and update the PO for del complete ( EKPO-ELIKZ) and final inv indicator (EKPO-EREKZ) by using BAPI PO change
hope this will help you

How do you get the integer of a number with more than 10 digits

I can't seem to be able to get the integer of a number with more than 10 digits.
ex:
integer(12345678901.3) returns -539222987 when it should really return 12345678901
Thanks for the help
(I'm on director 11 at the moment)

You can write a Parent script to represent Big Integers. I wrote some code to get you started. It consist of two classes - "BigInt" and "Digit". At this point you can only add two "BigInts" and print out the value with a toString() function. Note that you pass a String to the "BigInt" constructor.
In the message window you could enter something like:
x = script("BigInt").new("999999999999")
y = script("BigInt").new("100000000000000000004")
z = x.add(y)
put z.toString()
And the output window will show:
-- "100000001000000000003"
Here are the two Parent scripts / Classes
-- Digit
property val
property next
on new me, anInt
val = anInt
next = 0
return me
end new
-- BigInt
property Num
property StringRep
on new me, aString
Num = script("Digit").new(Integer(aString.char[aString.length]))
curNum = Num
repeat with pos = aString.length - 1 down to 1
    curNum.next = script("Digit").new(Integer(aString.char[pos]))
    curNum = curNum.next
end repeat
return me
end new
on add me , Num2
curNum = Num
curNum2 = Num2.Num
result = curNum.val + curNum2.val
if result > 9 then
    carry = 1
else
    carry = 0
end if
result = result mod 10
sum = script("Digit").new(result)
curSum = sum
curNum = curNum.next
curNum2 = curNum2.next
repeat while curNum.ObjectP AND curNum2.ObjectP
    result = curNum.val + curNum2.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum = curNum.next
    curNum2 = curNum2.next
end repeat
repeat while curNum.ObjectP
    result = curNum.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum = curNum.next
end repeat
repeat while curNum2.ObjectP
    result = curNum2.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum2 = curNum2.next
end repeat
StringRep = ""
me.makeString(sum)
return me.script.new(StringRep)
end add
on toString me
StringRep = ""
me.makeString(Num)
return StringRep
end toString
on makeString me, digit
if not digit then
    return
end if
me.makeString(digit.next)
put String(digit.val) after StringRep
end makeString

Select the same attribute in a query more than once

Hi Experts,
My requirement is to select the same attribute in a query more than once.
How can I acheive this?
Expecting an early solution..
Pilliga

Hi,
Create a calculated attribute that just displays the "same attribute".
(Note: you will need to uniquely name this object).
For example, if you wish to display Emp Name twice in the same query, then create a calculated attribute called Emp Name2 and select it and Emp Name in your query and the same info will be displayed twice in your results set.
Cheers,
Tanish

The Moutain Lion upgrade to cost more than $ 20 to me!

The Moutain Lion upgrade to cost more than $ 20 to me! I'll have to change printer. I have a Samsung ML-1610 that worked with Snow Leopard. With Mac OS 10.8 I tried everything, but there are no drivers for this printer. Even the newer printers from Samsung has no drivers for the Moutain Lion. I'm feeling using Linux in its infancy!

Does everything include this?
http://guigo.us/mac/splix/
Worked on Lion, at least.

Calendar said if I wanted to save entries for more than a month to click 'all events' in settings. Now all events except birthdays have disappeared! Have tried to reverse request with no luck. HELP!

Calendar message said if I wanted to save entries for more than a month I should go to settings and change to sync for 'all events'. I did this and all but repeating birthday entries disappeared. I have tried to reverse but nothing has reappeared. HELP!

Welcome to the discussions,
WHY does it claim to be 8G but my capacity now says its just 6.83
The size of you HD is calculated binary when it comes to use it, instead of decimal when companies want to advertise there products. 1 KB=1024Byte instead of 1000KB as advertised by the manufacturer. In your case this reduces the actual available space by the factor of 0.93 or approx. 7,4GB.
If you have an "other" section in your color bar showing the different types of data on your ipod, which is bigger than 500MB, this could be a sign of corrupt data caused by a sync that did not complete or copied damaged data. A restore will reduce the size to normal again.
Restoring: http://support.apple.com/kb/HT1414
If you restore your ipod, iTunes will install the newest firmware first and then add back your data and settings from your last backup if you choose to "restore from backup". Every backup is replaced by the following one, so make sure to include this folder in your backup routine in case you'll have to go back.
You can check the location and size of the backup folder for your ipod here:
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
copied from: About backups http://support.apple.com/kb/HT1766
Sorry, I can't answer your payment question, I have never used your kind of setup, maybe you can find something useful here: http://www.apple.com/support/itunes/

The fiscal year specified differs by more than a year from the fiscal year

Dear All
To rectify depreciation posted at development server I run OAGL which reset all depreciation posted (From FY 2008 to 2010), now when I am trying to post depreciation by AFAB for FY 2008 system showing error message
No posting possible in fiscal year 2008
Message no. AA688
Diagnosis
No posting is possible in the fiscal year 2008 specified. The fiscal year specified differs by more than a year from the fiscal year in which the last postings were performed.
Procedure
Correct your fiscal year specifications.
please advice me what step to be follow
Regards
Sekhar

Hi Sekhar,
Error AA688 typically occurs in two situations:
1) A company code did not have any depreciation posted in the previous year. See note 144441.
2) If in a comany code no depreciation has been posted ever, then it is important to note that the periods of the last depreciation posting in table TABA and the year and period of the last depreciation posting in table T093D (fields AFBLPE and AFBLGJ) are initial. You can set these fields to 000 / 0000 with the correction report attached in SAP note 26073.
See if any of this information helps you further.
Brigitte

Still waiting for the Hinge for the laptop for more than a Month

Similar Messages

Maybe you are looking for