No home phone service for more than two months

I am sending this note on behalf of my mother.  She has been waiting for technical services to her home phone for more than two months.  She has received dates where a technician would come out to repair her services in which she has left work early or stayed home on weekends no avail.  My mom is not in best health and has a child with disabilities living in the home and it is imperative that her services are working.  It is frustrating to her to pay for a service she's not receiving.  This is the worst customer service experience from Verizon.  
I am asking for immediate resolve to this issue and to work with us to assure payment for time where phone has not worked Will not be charged to her account.  Please contact me {edited for privacy}.

Hi lmatthews522,
Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

Similar Messages

  • How to close open POs which are open for more than two month

    I am new to MM please somebody help me with this
    Thank you

    there is NO STD SAP program which will help u closing the open PO (more than two months)
    you need to go each and every PO and mark it as Del completed (item level in deleivery tab)
    but this is only stastestical indicator. System wont stop you creating further GR against such PO if any Qty leftout.
    for example - PO order 10EA, you recd 8EA and marked the indicator , still you can make the GR for 2EA
    there is SPRO setting as well to mark the PO as delivery completed once PO Qty and MIGO QTy is equal or with some variance . but this will work on real time
    Another way to set the final invoice indicator in invoice tab
    system will allow you to post the further invoices but all be blocked.
    somebody need to go and verify the blocked invoices and take necessary action
    This is again a manual activity, there is no such STD setting or T code exist
    Another way is you can create a program with the help of abaper
    built a logic on date / QTy and Amount and update the PO for del complete ( EKPO-ELIKZ) and final inv indicator (EKPO-EREKZ) by using BAPI PO change
    hope this will help you

  • No landline phone service for more than a week

    I have been without landline phone service since Wednesday September 4th, 2013. Today, September 12, is a full 8 days without phone service. I have called Verizon countless amount of times with promises to come and fix my service but to no avail. I was informed this was an area outtage which would make me think they would fix it faster but no. I am so disappointed with the way Verizon has been handling this situation. Typical, if you ask me. My ticket number is{edited for privacy}

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

  • No phone service for more than six weeks !!! Portl...

    My phone edited by mod stopped working on the evening of Feb. 24th. I reported the problem the next morning and was told that it would be fixed within three days. The problem turned out to be at the local exchange and new cabling was required to resolve the problem. This required local traffic control which was scheduled to be in place on March 10th. March 10th came and went and I was told that the engineers installing the cable were not updating the engineers who were supposed to configure the phone service once the new cable was in place. At no point was I given an estimate of when I might expect my service might be restored. I finally got an update on March 27th which said the traffic control would be in place on March 31st to install the required cabling. A further update said my phone should be working on April 2nd. On April 6th with my phone still not working I received an update saying that the engineers who going to install the cabling required traffic lights which weren't available until this coming Saturday, April 11th. Now I'm hoping against hope that the cabling might be installed this Saturday and I might receive an update of when I can expect my phone to be working again. Then I can hope that that update might actually be acurate and I might actually have phone service. I really have a hard time seeing why in over six weeks time no one at BT can give me an accurate estimate of when my phone service can be restored. I have no luck at all getting any useful information by calling BT on the usual line (0800 800 151) since all I'm told is that my problem will be updated soon. Any help or actual, useful information would be very much appreciated. Failing that, I guess I have to wait until week 8 of no service and try my luck with the communications ombudsman. 

    Once the Forum Mods have read your post they will post an invite here, once you reply to them they will take personal ownership of the problem until resolved.
    Do not send them a Personal Message as this is the incorrect contact method and cannot be properly tracked also the mod contacted may not be on shift for sometime and this will delay your help.
    The forum mods normally reply within 3/5 working days after you have contacted them via their contact form
    They will contact you personally by email or phone.
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one?

    I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?

    If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
    Or take it to a genius bar if you have one near?
    Or further explain what setting you are needing fixed back and im sure someone here can help you for free!

  • VERIZON CHANGED HIGH SPEED DSL AT CENTRAL OFFICE AFTER I HAD 7.840 MBPS FOR MORE THAN 10 MONTHS!!!

    ALL OF THE SUDDEN VERIZON DECIDES IN LATE APRIL THAT I SHOULD HAVE 7.1 MBPS INSTEAD OF THE 7.840 MBPS I HAVE BEEN HAVING FOR MORE THAN 10 MONTHS. AS A MATTER OF FACT, AFTER A LOT OF DISCONNECTIONS SUFFERED IN MARCH/APRIL 2012 BECAUSE VERIZON WAS DOING SOMETHING IN THEIR CENTRAL OFFICE WITHOUT TELLING TO THEIR CUSTOMERS, AND HAVING TO REPLACE ALL OF THE DSL FILTERS, AND TWO MODEMS... I GOT THE D-LINK WORKING AT 7.840 MBPS. AS A MATTER OF FACT, VERIZON TECHNICIAN CAME TO MY HOME AND WE DID INSTALL THE NEW MODEM AT THAT VERY SPEED, WHICH WAS AGREED MORE THAN 1 YEAR AGO AFTER DOING A LOT OF TESTING TO ENSURE THE STABILITY IN THE CONNECTION. ALL OF THE SUDDEN, AFTER THE 20-DAY HONEYMOON WITH MY NEW MODEM, I NOTICED THAT MY SPEED WAS NOT THE SAME, AND FOUND OUT THAT THE IP WAS CHANGED AND THE SPEED SETTING DROPPED TO 7.1 MBPS. NOW VERIZON CLAIMS THAT MY CONTRACT WAS FOR A MAXIMUM OF 7.1 MBPS WHICH IS NOT TRUE BECAUSE I WAS IN THE 7-15 MBPS RANGE!!! AS A MATTER OF FACT I COULD GO EVEN OVER 8 MBPS BUT BECAUSE OF MY LOCATION, RELATIVELY FAR AWAY FROM THE CENTRAL OFFICE AND AFTER A LOT OF TESTING, 7.840 MBPS WAS THE MOST CONVENIENT SPEED. VERIZON CHANGES THEIR POLICIES NOT NOTIFYING THE CUSTOMERS, THEY DO WORK INTERRUPTING THE SERVICE WITHOUT NOTIFYING. I AM GOING TO WAIT AND SEE WHAT THEY DO IN THIS CASE. IF THIS IS NOT SOLVED PROPERLY... GOOD BYE VERIZON, AND HELLO TIME WARNER CABLE!!! SO, VERIZON BE PREPARED TO LOSE ANOTHER LOYAL CUSTOMER FOR MORE THAN 9 YEARS!!! THAT IS THE PROBLEM WITH VERIZON, THEY ARE SO DEDICATED TO GET NEW CUSTOMERS THAT FORGET ABOUT THEIR OLD LOYAL ONES... UNFORTUNATELY, THERE ARE CONSEQUENCES... AND THOSE ARE THAT YOU WILL LOSE THE OLD ONES SOON BECAUSE YOUR LACK OF CARE ABOUT THEM!!! ONCE YOU ARE HOOKED WITH VERIZON, THEY THINK THEY GOTCHA FOREVER... LET'S WAIT AND SEE...

    Believe or not... That 20% does make a difference... In one of my games, I used to have 5.3 secs of response time, now it does not lower from 7.8. By the way, even my PC worked faster  when I had that little higher speed... I know the changes were done without my knowledge because for a period of 2 weeks I got lot of unstability in my connection that I never got for years before... After 20 days with the first IP assigned to the new modem, the speed dropped like Verizon was running a program to levelize such an speed.
    At the end, what really bothers me, is that the 7.840 Mbps was a speed agreed with Verizon, their technicians, their supervisors at the CO, and it was fully documented, and all of the sudden because an "internal change in their policies" that agreement was broken... I am currently making arrangements to have FIOS installed at home, subject to an scouting visit from Verizon to evaluate the feasibility of its installation according to my internal wiring limitations. I have to give them a try... No doubt that it would me cheaper and much faster than the high speed enhanced internet connection that I currently have. Let's wait and see...
    Thank you for your interest in my case and observations made too.

  • Calendars to List for more than 12 months? With advanced selection the Listing will go back farther than 12 months but will then disappear!

    How do you get Ical to List for more than 12 months on your Ipad?  I have used Advanced settings which accomplish this but the Listing disappear overnight!

    Hi Kaorin
    I was charged £75 last month for broadband, calls, and TV - we have unlimited so cannot be charged any extra, and have never used the phone.
    It's shocking - we too were 'enticed' by a discount, which really didn't mean anything...
    Hope you get the issue's sorted. Feel free to post on my forum post in my signature.
    Please see my story:
    http://community.bt.com/t5/Bills-Call-Packages/Taken-to-the-Ombudsman-Service-My-story-with-BT/td-p/211003

  • My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for mo

    My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?, My iPhone 5s won't turn on. Its battery was drained for more than a month. I tried charging it for more than an hour then pressed reset but it still won't turn on. What could be the problem?

    You said "reset," so Meg assumed that's what you did. But "reset" is not a button; to reset the phone you must hold the HOME and SLEEP buttons at the same time until an Apple logo appears. You may have to hold for up to 30 seconds, and if the battery was completely drained, you will have to restore iOS using iTunes on your computer.

  • I have a nokia c6-00 that has adobe flash installed. for more than three months can not I watch vide

    I have a nokia c6-00 that has adobe flash installed. for more than three months can not I watch videos on it. how to solve this situation? best regards

    hey! Will someone answer please?? Does anyone hear me?? I'm really getting frustrated! And why isn't firmware 40.0.021 not available for update on phone? I don't have net connection on my pc, and cyber cafes won't let me install ovi suite there!

  • Calendar said if I wanted to save entries for more than a month to click 'all events' in settings.   Now all events except birthdays have disappeared!  Have tried to reverse request with no luck.  HELP!

    Calendar message said if I wanted to save entries for more than a month I should go to settings and change to sync for 'all events'.  I did this and all but repeating birthday entries disappeared.   I have tried to reverse but nothing has reappeared.  HELP!

    Welcome to the discussions,
    WHY does it claim to be 8G but my capacity now says its just 6.83
    The size of you HD is calculated binary when it comes to use it, instead of decimal when companies want to advertise there products. 1 KB=1024Byte instead of 1000KB as advertised by the manufacturer. In your case this reduces the actual available space by the factor of 0.93 or approx. 7,4GB.
    If you have an "other" section in your color bar showing the different types of data on your ipod, which is bigger than 500MB, this could be a sign of corrupt data caused by a sync that did not complete or copied damaged data. A restore will reduce the size to normal again.
    Restoring: http://support.apple.com/kb/HT1414
    If you restore your ipod, iTunes will install the newest firmware first and then add back your data and settings from your last backup if you choose to "restore from backup". Every backup is replaced by the following one, so make sure to include this folder in your backup routine in case you'll have to go back.
    You can check the location and size of the backup folder for your ipod here:
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    copied from: About backups http://support.apple.com/kb/HT1766
    Sorry, I can't answer your payment question, I have never used your kind of setup, maybe you can find something useful here: http://www.apple.com/support/itunes/

  • How can i use IDSM-2 in inline mode for more than two VLANs?

    can i use the IDSM-2 in inline mode to be ips to more than two VLANS
    like this or it isn't
    intrusion-detection module 5 data port 1 access-vlan 10,20,30,40,50
    intrusion-detection module 5 data port 1 access-vlan 100,200
    thank u all for your help

    The IDSM-2 ports need to be configured as trunk ports with multiple vlans rather than as access ports.
    http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517eb.html#wp1068377
    And instead of creating an inline interface pair by pairing Gig0/7 with Gig0/8 within the IDSM-2 configuration, you would create inline vlan pairs.
    With an inline vlan pair you pair 2 vlans on the same interface.
    You can have up to 255 inline vlan pairs on each interface (assumining you keep the total traffic from all of the pairs within the IDSM-2s performance limit of around 500Mbps)
    How to create inline vlan pairs:
    http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517bb.html#wp1047852
    The other aspect you need to be aware of is that not all IOS versions will support configuring the IDSM-2 data ports as trunk ports for inline vlan pairs.
    Your best bet is to use 12.2(18)SXF4 or a later version on the 12.2(18)SXF train.
    The 12.2(33)SR train does not currently support the trunk feature for the IDSM-2.

  • Can I make a DVD that will go for more than two hours?

    Hi,
    I'm working in iDVD 08, version 7.0.1, and when I drop in video that lasts over an hour, I get a warning. The original videos are around 100 MB for each hour, and iDVD won't let me add more than two. It's saying my two 100 MB videos will fill the 4.2 GB of space on the DVD.
    What can I do to have the videos stay at around 100 MB each, so I can put several of them on one DVD?
    Any help is most appreciated.
    Russ Conte

    Russ,
    iDVD isn't really designed to archive old highly compressed movie files.
    DV video (for which iDVD was originally designed) runs about 13 GB per hour and iDVD mpg-2 compresses everything to fit a maximum of 120 minutes on a single-layer disc. (Your files are much more highly compressed than DV and perhaps are also smaller in image size.)
    If you want to 'cram' a lot more content on a DVD (and don't care about the quality) you might want to look at VisualHub that claims to let you put up to 18 hours of content on a disc.
    F Shippey

  • Creating Common Bom for more than two Organizations

    Hi All,
    I have a requirement of creating a Common BOM (bill of materials and few components to some organizations at a time) for more than one Organization.
    How can i do this.
    Can any one help me on this.
    Thank you,
    Amar

    Amar,
    Create org hierarchy and use hierarchy when running common bill program rather than org by org.
    Thanks
    Nagamohan

  • PSE8 Backup/Synchronization not working for more than a month

    1. Reconnecting files shows that a file is not connected; however, no file is listed. How do I find missing file's properties.
    2. Backup/synchronization preferences works fine.
    3. I can select one or more or the whole catalog.
    4. The twirly icons show next to the album(s) for a second or show but then the synced icon remains in album/albums.
    5. I click OK and after the hour glass shows a while, it finishes.
    6. I click on icon and see that sychronization is on.
    7. If I check (unsynced items, synced items, or items marked for sync) it shows nothing and says that none of those choices matches.
    8. I have repaired and reindexed countless times (never has there been a "repair" problem.
    9. I click on optimize and that works.
    10. After that I notice "generating thumb nails" and the twirly thing moving. I've let it generate thumbnails for more than 24 hours and it's still going.
    I have spent countles hours during day and night, and I can't get it to work.
    I noticed that someone wrote that he had a similar problem that began with his using the IPAD. And I started using the IPAD also, but I couldn't sync my files with photoshop.com before that.
    Customer service and Help provides me with no answers. What should I do?

    Hi clairenanak:
    Sorry to hear about the troubles.
    On your #1, you may have disconnected files of media types that are not visible. To ensure that all media types are visible, go to View > Media Types, and check any items that are not currently checked. Then try the Reconnect.
    As far as backup/sync not working, disconnected files can stop sync from working.
    After resolving the disconnected files issue, let us know if sync is not working. We may need to look at the sync log to determine why.
    As for the Organizer constantly generating thumbnails, this could indicated that you have many files, for example 10,000, in your catalog.
    If you have many files in your catalog, then you may need to just wait for the process to finish.
    It may also indicate a problem with the thumbnail cache that can't be repaired by the Optimize command.
    You can manually reset this file by doing the following:
    Determine the name of your Elements Organizer catalog.
    The name of the catalog appears in the lower-left of the Organizer.
        Alternatively, you can open the Organizer and then click File >  Catalog. The name of the catalog will show in the list at the bottom  with " [current]" after it.
    Close the Elements Organizer.
    Navigate in Windows Explorer to the folder that contains your catalog. Here are the default locations:
       Windows 7 or Vista: C:\ProgramData\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>  
    Click Start, type "%ProgramData%" (including the quotation marks) into the Start Search, and then press Enter.
    Open each folder in the above structure until you have opened the catalog folder.
       Windows XP: C:\Documents and Settings\All Users\Application Data\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>  
    Choose Start > Run, type "%AllUsersProfile%\Application Data" (including the quotation marks) in the Open text box, then press Enter or click OK.
    Open each folder in the above structure until you have opened the catalog folder.
       NOTE: Replace <CATALOG NAME> with the name of the catalog that you determined in Step 1 above.
    There should be a file called thumb.5.cache, which is the thumbnail cache. Delete this file.
    The next time you open the Elements Organizer, the thumbnail cache will begin to rebuild. This may take some time, depending on the number of files you have in the catalog.
    HTH

  • Favour - Anyone who has run 10.2.0.1-2 on linux for more than 3 months?

    If you have 10.2.0.1 or 2, on linux and you have a user that is more than three months old, can you please do me a favour:
    login with your user that is 3 months old
    set it up with at least 2 email addresses
    setup a typical 2 week schedule for an out of hours user as follows
    Week 1:
    mon 12:00am - 8am EMAIL ADDRESS 1
    mon 6pm - 12am EMAIL ADDRESS 2
    tue - fri 12:00am - 8am, 6pm - 12am EMAIL ADDRESS 2
    Sat - sun all day EMAIL ADDRESS 2
    Week 2:
    mon 12:00am - 8am EMAIL ADDRESS 2
    mon 6pm - 12am EMAIL ADDRESS 1
    tue - fri 12:00am - 8am, 6pm - 12am EMAIL ADDRESS 1
    Sat - sun all day EMAIL ADDRESS 1
    Now when you view the schedule, does monday display correctly? In my case, the wrong email address is displayed for monday, yet when you edit the schedule it shows correctly. Had this SR open with oracle since March, and now they are refusing to do anything else on it.
    It only manifests itself on old users, a brand new user works perfectly. I have the same problem on my live 10.2.0.1 grid and my test 10.2.0.2 grid systems.
    If you have the time to try it out ( i know its a minor thing), I'd appreciate it.
    Bazza
    Message was edited by:
    bazzza

    Bear in mind the SR was raised in March this year.
    I've demonstrated the problem at 10.2.0.1, they asked me to upgrade to 10.2.0.2, so I did. Still had the issue, so I demo'ed it again for them. A newly created user does not exhibit the issue. I argued this wasn't a workaround, as all rules, UDMS etc would have to somehow migrated to the new user. A lengthy manual task, plus, a few months down the line I'm not guaranteed that I won't have the same issue again. So they raised a bug (5337476). Then they asked for a copy of the repository which I gave them. Two days after supplying the export, they want me to set up a brand new environment, to replicate the issue from scratch. I lost what little patience I had, arguing if I don't know what caused the issue, how can I be expected to replicate it? The fact I have the problem on two separate grid systems, on more than one user on each system, is stunning evidence of a problem.
    Oracle keep trying to fob me off, if someone else is also experiencing the same issue it would serve as some desparately needed ammo!
    Bazza

Maybe you are looking for