STO: Condition tab not occuring

Hi Friends,
I have configured a STO purchase order and not getting condition tab at item level. Please suggest how can i get Condition tab in Purchase order.
Kraheja.

Hello,
Pricing configuration for STO: -
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N (Conditions Tab).
Regards,
Shailesh

Similar Messages

  • CONDITION TAB NOT COMING-STO

    hi
    condition tab is not coming while creating PO of stock transfer order
    i assigned Schema Determination for UB doc type
    help

    Hi,
    For Intracompany Stock transfer there will be NO condition TAB ,this is as per standard SAP process .As you are transfering the material within same plant,so there is no condition or pricing required  .You are not doing any purchasing or sale between the plants.
    Thanks,
    AMIT

  • Why Conditions tab Not available in STO ?

    Hi All,
    In one system I see Conditions tab for STO in both header level and item detail level, but in another client I don't see the Conditions tabs........Why is this? How do I enable the Condition Tabs?
    Thanks in advance

    Hi Duke
    GOTO SPRO->Materials Management->Purchasing->Conditions->Define Price Determination process->Define Schema Determination Process->Determine Schema for Stock Transport Orders
    Select New entries enter the schema group, documentype for STO and Price determination procedure.
    Hope this works.
    Regards
    Jagadish

  • STO - Excise tab not getting displayed in material document after posting.

    Dear all,
    We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
    It is plant to plant stock transfer with excise, the process that we are following as given below:
    1) STO PO - ME21N
    2) Outbound delivery - VL10B - Post PGI in VL02N
    3) Outgoing excise invoice - J1IIN  - With the key DLFC.
    4) GR - MIGO with excise invoice capture.
    During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
    But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
    Request to please do let us know if we have missed out on any configuration or master data.
    Regards,
    mahesh.

    Hi,
    Do the all customization setting for CIN for reference check the following link for India. and Material management
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    You have to maintain Excise master data for material,vendor and PLant in J1ID .
    reward if helpful,

  • Condition tab in STO is not getting displayed

    Hi,
    While creating STO, the Condition tab in Line Item is not getting displayed.
    Why it is not getting displayed? Where do I need to change the configuration?
    Do I need to maintain any Pricing Procedure in MM?
    Please guide.
    Regards,
    PK

    Hi,
    Check whether you have maintained Schema determination for respective document type and STO.
    below mentioned is the navigation path to maintain the same.
    > spro - materials management - purchasing - conditions - define price determination process - define schema determination - Determine Schema for Stock Transport Orders
    Here maintain the Purchasing Schema group , Document type & pricing procedure for STO.
    Standard Pricing procedure for STO is RM2000.
    Hope this is helpful..
    Regards,
    Vamshi

  • RECN: Conditions Tab: Header data for second section not appearing

    Hello,
    Need your kind advise please. I have entered a contract successfully. The contract type is Pay:Rates Payment. The contract has been successfully saved.
    The problem comes when I am trying to display the contract. Here is what's happening sequentially:
    Procedure 1
    1.  I am using TCode RECN and keying in the contract number.
    2. Upon pressing Enter, the General Data tab of the contract is opening.
    3. I am clicking on the icon to change the status from 'display' to 'change'. The mode successfully becomes the 'change mode'.
    4. I am clicking on the Conditions tab and I can see that the screen shows two sections. The top section shows the various conditions that I have created. The bottom section shows the details of the condition for the line item selected from the top section.
    5. I am making the necessary changes and successfully saving the changes made to the contract. Then I am pressing F3 and coming back to the main RECN screen.
    BUT:
    An error occurs when I modify the above procedure slightly.
    Procedure 2
    1. When I am entering the contract once more, the first screen that is opening is the Conditions tab of the contract (quite naturally as this was the last screen that i used just now).
    2. When I am then clicking on the icon to change the status from display to 'change', the system is issuing an error message "Please fill all the mandatory fields".
    3. Upon close examination i am finding that in the bottom section of the Conditions Tab (which is supposed to show the details of the condition on which the cursor has been selected in the top section) the field just above the 5 tabs (ie. Condition, Terms, Calculation, Distribution, Memo) is not populating with the name of the condition on which the cursor has been selected in the top section.
    4. Since this field is a mandatory field, the system naturally throws the error "fill up all mandatory fields".
    The point to be noted is that this field gets perfectly populated when i am following the procedure 1. But in the same contract, this field doesnt get populated and throws the error message when I am following the Procedure 2.
    Request you to please help me understand why in the procedure 2, the field is not getting populated.
    Regards.

    Hello Veman,
    Many thanks for the kind response. However in my case the problem is that when I am trying to go into the 'change' mode for an existing record (which has already been once successfully saved), it is STILL throwing the error message 'fill up all mandatory fields'. The only way to come out of the screen is to press the 'cancel' button.
    What is even more funny is that when I am trying to enter the contract directly using the menu RE Cntract - Change from the first RECN screen, then there is no problem coming.
    My question is WHY is the system throwing that error message when clearly there is no error existing in the record. I believe this will be a programming error. The problem that i am referringto matches very closely to the solution provided vide note number 1291666. The reason why I cant apply this note is because my SAP release is 600 whereas this remedy is for 602, 603 ans 604.
    Regards,
    Suvarghya Dutta

  • Net value on condition tab in a STO

    Dear Guru's
    I have manage to get the valuation price displayed in the STO PO condition tab in condition P101.
    I've also managed to get the P101 condition to display in the net value field in the condition tab when pressing the "update price" button in the condition tab.
    However, how do I the condition P101 to display in the net value field automatically?
    I have it done in our old 4.7 system but do not know how I did it
    Thanks in advance,
    Thomas

    Missed a transport

  • Conditon value not updating in CONDITION tab for Sales Order

    Hi Experts,
    Can anyone tell me about this ?
    I have created a Z condition type for VA01 and need to place some value (based on some logic  taken from conditon records).
    I am not able to do this.
    Steps already taken care of.
    !) In VOFM >formula section>conditon value = New routine is created.
    2) in V/08, after selecting the Z condition type Routine number is given in front of the Z condition type.
    Waiting....

    Hi Prabhu,
    I didn't understand the meaning of analyzing the Pricing Procedure ?
    In V/08, I have selected the Z condition type created in the system and than selecting that, navigated to CONTROL folder.
    Now in front of the Z condition type in CALCULATION TYPE field the number of the routine is given (Which is created using VOFM).
    Now what else I need to do?
    Repy@Madhu.
    Yes Madhu. Routine is activated and control is stopping if break point given in the routine. In this routine I am trying to populate a value in its XKOMV internal table's KBETR field but when VA01's main CONDITIONS TABS screen comes the value is not appearing.

  • Tax amount not displaying in Condition tab in PO

    Hi
    I have maintained tax procedure TAXINJ in PO, Tax is input tax 1% CST, Act Key is NVV, cond is JIP1.
    But the tax amount is not displaying under the condition tab of the PO in Non-deductible tax (Cond type NAVS).
    Plz help me to sort out this issue.
    Thanks
    Prasant Sekhar

    Hi,
    In Pricing Scheme do you have any automatic Condition Type that "calls" the tax you maintained in TCODE FTXP?
    Cheers.

  • Not displaying tax value in condition tab in PO

    Dear MM experts,
    I have a problem in condition tab in PO, I have applied a tax code (input tax) in the invoice tab, the tax (or condition) value is calculating and showing in the tax details.
    But i am not getting the tax value in condition tab and the condition value is showing zero in item condition details.
    Whats the process required to tax (or condition) value in condition tab in PO.
    Plz help me to overcome this problem.
    Thanks in advance
    Prasant Sekhar

    Hi,
    Create the condition record throgh trx MEK1.
    it will appear in Invoice tab  not in Conditions..
    The COnditions in Condition Tab will come through Pricing procedure..
    Thx
    Raju

  • Pricing condition is not displayed in the Condition tab

    Hi all,
    I replicted pricing condition from CRM to ECC along with Pricing procedure. I see that condition and pricing procedure in CRM system. When I create an order and go to Item condition tab then I don't see my replicated condition there (I expect it to be in the list). And pricing analysis shows for that condition that "Condition with external datasource has not been found". One guess is that I didn't follow the procedure of displaying condition types in product conditions after replication, i.e. didn't create appropriate maintenance group.
    Advise please
    Regards

    Hi Alex,
    I get the same error message "Condition with external datasource has not been found" like you.
    The field "INVENT_LOC" is filled properly.
    Did you do anything else to set up the VPRS condition? Any exchange with the ERP that must be configured?
    Is there any documentation how to set  up this condition?
    Thanks in advance.
       Best Regards,
          Ingo

  • No condition tab in STO

    Hi experts,
    sometimes in the inter or intra company STO, there is no condition tab in item details level. And it has no impact to billing creation in which the price is got correctly from info record.
    why some times no this tab? what is the reason behind and any impact for this?Thanks...

    Pricing configuration for STO: -
    In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. F Document to Schema Grp Pur. Org, STO Type (For e.g. UB) and Supplying Plant.
    Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
    You can create new freight/delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08

  • User defined field not visible "Conditions" tab

    I have created a user-defined field Z_E_PREIS that I want to use as a result-type of user field in condition table. When using a condition record that has this field, the field is not visible inthe "Conditions" tab of the transaction item. Why is that?
    Customizing activities done:
    - data element Z_E_PREIS (CHAR10) created with SE11
    - field catalog: field name "Z_E_PREIS" created in "Fields NotContained" tab, referring to data element Z_E_PREIS
    - BAdI /SAPCND/ROLLNAME activated for this field, for contexts CONTRACTand PRODUCT
    - condition table CUS9051 four fields:o search fields: sales org., distr.ch. and producto result field: Z_E_PREIS
    - access sequence Z951 with the fields from cond.tbl CUS9051- condition type ZZ51 using access sequence Z951, manual maintenanceallowed- pricing procedure ZZ901 with one condition type: ZZ51
    - determination of pricing procedure: sales org. 50004458 -distr.ch.01 - doc.pr.proc.Z
    - customer pr.proc. 1 => ZZ901
    - created transaction type ZF12 (doc.pr.proc Z) and item category ZV12and item category determination
    Master Data maintenance:
    - created condition maintenance group ZPRODCRM: added condition typeZZ51
    - condition maintenance group ZPRODCRM assigned to application CRM inMaster Data
    -> Products -> Special Settings for Sales Operations- created product ZTEST3, item category group U001, distributionchain "Rel Three - 01"
    - in ZTEST3, created three condition records for ZZ51 (sequential 2-week periods). User field Z_E_PREIS "Price Key" maintained for each of them.
    Best regards, Anders

    Hi Raja,
    Prior to trying Gordons option of unmarking and remarking them i would suggest you do a little more investigation as this can potentially change the field names in XL report and if you have any reports using them they may stop working (it can add a post fix of _1).
    Firstly, what are the fields set as in the User Defined Fields window in XL reporter?  Light Dimensions, Dimension Attribute or Measure?  If its a Dimension Attribute for example on the Business Partner UDF, it will not be visible in the tab section but should be shown if you drag and drop the Business Partner dimension in the report, then right click and choose display more attributes (dimension attribute UDFs will be in this list).  Light Dimensions and Measures should appear in the tabs.
    If they are set as a light dimension or measure and are not in the tab section, has this only just started happening or have they never been visible?  If its just started happening, having you recently upgraded to a new patch?  If so, in future you need to run a script on the Company and Common database prior to the patch upgrade.  If you did not run these scripts you will need to do Gordons solution but as I say, if any reports have UDFs in these may not work after and you will have to manually edit them.
    Regards,
    Adrian

  • PO conditions are not visible in conditions tab in ME23N

    Hi friends,
    I am facing an issue where the PO conditions tab is showing up as blank. All other tabs are displayed and GR/IR documents are posted correct. On conditions tab analysis of pricing is seen, conditions records are displayed however no conditions displayed on this tab. Also when I try creating a PO using ME21N conditions appear as ****** and I get the error internal number range missing. Can you suggest what can possibly the issue and how to resolve it?
    Thanks in advance!
    - Nutan

    Hi,
    This might be due to authorisations in display prices for PO objects.
    PLease ask Basis to check if Activity "09 - Diaplay Prices" is maintained for below objects in the role assigned to user ID
    M_BEST_BSA <OBJ> Document Type in Purchase Order
    M_BEST_EKG <OBJ> Purchasing Group in Purchase Order
    M_BEST_EKO <OBJ> Purchasing Organization in Purchase Order
    M_BEST_WRK <OBJ> Plant in Purchase Order
    Regards,
    Rakesh

  • Conditions Tab should not be displayed in the sales order.

    Dear Gurus,
    My client wants to hide the conditions tab (header & item) in the sales order while in display mode.
    Because his dealers should be in a position to see the pricing strucutre.
    Pl guide me how to do this with transaction variant.
    Thanks & Regards,
    Sreehari

    You can create a transaction variant for VA03 and hide the tabs using SHD0.  You can also assign it to a separate transaction code if it meets your requirements.

Maybe you are looking for