STO - outbound delivery partially do PGI in warehouse

Based on the STO, we are creating outbound delivery,  most of the outbound delivery has nearly more than  200 line items, out of 200,  nearly 120 line items TO created and  confirmed, now the user wants to save PGI for only  confirmed 120 line item, but system wouldn't allow us to confirm partial PGI, for these user have to delete the remaining 80 items  then only system allow to do the PGI.
Is there any possibilities to save the outbound delivery partially, then for the next time when we open the same outbound delivery remaining unconfirmed line item have to show, and it allow us to save the remaining items.
Thanks in advance
regards
Shivani

Hi,
Error message VL609 is designed to prevent PGI before picking was
complete. If not, posting cannot be carried out unless you
change delivery quantity. Partial postings are not possible!
Function 'copy picked quantity as delivery quantity' could be used.
To sum up, It is not be possible to goods issue a delivery that is not
fully picked and for that reason error message VL 609 is issued.

Similar Messages

  • CC STO- Outbound delivery to trigger GR  in the system

    Hi all,
    I am building a scenario
    Cross company STO - outbound delivery - should trigger Idoc to post the Goods receipt against the STO(PO)in the same box (client) for different company code /plant (receiving).
    Is this possible in Standard , what is the message type or Idoc type
    Please throw some light on the possibilities.
    Thank you .
    Edited by: satheesh on Oct 19, 2010 5:27 PM

    Hi,
    Error message VL609 is designed to prevent PGI before picking was
    complete. If not, posting cannot be carried out unless you
    change delivery quantity. Partial postings are not possible!
    Function 'copy picked quantity as delivery quantity' could be used.
    To sum up, It is not be possible to goods issue a delivery that is not
    fully picked and for that reason error message VL 609 is issued.

  • CC STO- Outbound delivery to trigger GR(107)

    Hi all,
    I am building a scenario
    Cross company STO - outbound delivery - should trigger Idoc to post the Goods receipt against the STO(PO)in the same box (client) for different company code /plant (receiving).
    Is this possible in Standard , what is the message type or Idoc type
    Please throw some light on the possibilities.
    Thank you.

    Use Inbound delivery to receipt the goods through VL32N transaction.You told serial number is not copying  from outbound delivery.In that case check the program is there any custom logic you can use to copy outbound to inbound delivery serial number.

  • Shipment Cost for an STO/ Outbound Delivery

    Hello All,
    We are trying to configure shipment cost for STO. We are facing an issue as explained below. Let me know if anyone of you faced a similar issue and if you have ideas for the fix -
    In our scenario the Shipment cost calculation is done on the following basis -
    1) Flat Rate - For example for transporting of goods from new york to atlanta.
    I did complete the configuration for shipment cost and I am able to get shipment cost in the STO. Here is an example of where I am stuck -
    1. I created outbound delivery # 1 (partial quantity) for the sto (with 2 line items). When I create shipment cost document, it allocates the shipment cost to the 2 line items proportionately. eg. 100$ is distributed as 50$ each.
    2. Now, when I create a new outbound delivery #2 for the rest of the quantity and try to create shipment cost, it distributes based on the ratio of the quantity shipped. This is how it distributes -
    (Quantity shipped in OBD#2/ Total STO Quantity) * Shipment cost from first OBD (=50$).
    What we want is the exact distribution of 50$ for the second OBD as well.
    Appreciate your help!!
    Thanks in Advance
    Piyush

    Got it....SAP NOTE - 907632 fixed the issue.

  • Urgent - STO Outbound delivery

    Hi friends,
    Can anybody tell me in outbound delivery for STPO why the system is allowing to post GI more than STPO quantity ? is their setting customization.I have lots of STPO having GI  quantity in outbound delivery greater than STPO.
    Regards,
    Sachin.

    Hi
    I think you have allowed Over delivery Tolerance to STO....
    In OLME -
    > PO -
    > Setup STO -
    > In Maintain One step method and Overdelivery tollerance......for your Supplying Plant and Receiving Plant combination, Dont allow any Over delivery Tollerance....
    Rewards if useful
    Regards
    s.Baskaran

  • STO Outbound delivery document not generated

    Hi all
    I am creating outbound delivery VL10B with reference to PO(STO), when I exicute (F8) after giving PO no. and Source and supplying Plant, the list is emptey. N docs. is getting created.
    what should I do to solve this problum?
    Help will be appericiated
    Pradeep

    Dear Pradip
    While creating STO itself in ME21N we will be mentioning the supplying plant and receiving plant and receiving storage location
    So why do you search for this in VL10B?
    In your purchase order if the shipping Tab is coming delivery will automatically created in VL10B provided your PO is saved without any error
    Please check your shipping data settings
    Hope this information will be useful to you
    Sales area 0003, 04, 21 plant is 1002
    Sales area 0004, 05, 21 plant is ABCD
    If you transport material from 1002 to ABCD plant then 1002 is supplying plant and ABCD is receiving plant
    Now this ABCD plant should be made as a customer in XD01 mainly with shipping conditions in that data in sales area 0003, 04, 21 and this internal no has to be noted
    In STO the receiving plant is being made as a customer in the supplying plants sales area and the internal customer no has to be assigned
    in-img-mm-purchasing-purchase order-set up STO--define shipping data for plants
    Now in that img activity that i mentioned above against plant 1002 you have to give sales area as 0003, 04, 21
    Against plant ABCD you have mention sales area as 0004, 05, 21 and also this internal customer no in that internal customer tab
    Then only STO can happen between these two assuming that all delivery types and other things are configured pakka
    Assign delivery type and checking rule
    assign document type one step procedure and under delivery tolerance
    Regards
    Raja

  • Single STO Outbound delivery not creating for different lines in PO.

    HI ALl...
    1... I  have 2 different ST PO which raised by other plant(plant is same), and it contains different line item.
    When try to do outbound delivery in VL10B, it is creating seperate outbound delivery doc to each item, but not created single doc for all items.
    Please let know, if any thing needs to be done, to get create single outbound delivery for all the items in PO.
    2... Is it possible to pick the Price automatically ( MAP of the supplying plant material), while create Billing in VF01.
    Regards
    Chandradhara...

    HI..
    I have checked and corrected Delivery date/ loading group and Transportation group, now it is coming single delivery document.
    OTHER REQUIREMENT IS;
    We need MAP of the Supplying Plant to be picked will do billing for PRICE condition. What settings should be done
    Regards
    Chandradhara

  • STO Outbound delivery issue

    Hi All,
    I've a intercompany customer (say ICABCD) which has Ship-to Party maintained as 12345678 (not same as Sold-to Party) in Customer master. Now when I create a I/C PO to procure goods for ICABCD and create delivery (outbound), it sets Ship-to Party in delivery as ICABCD, not 12345678. Partner determination at delivery level is perfectly fine and has no issues at all.
    As a result when I create a I/C billing document and Commercial Invoice subsequently, it gives the Ship-to Party address as ICABCD address in Commercial Invoice since it is taking VBPA-KUNNR with PARVW=SH by passing Billing document number. I know the workaround could be referring KNVP-KUNNR, PARVW=SH (and VKORG).
    But at the first place, why it is not determining the correct Ship-to Party in Delivery? Is there a solution for this? Is this the standard behavior?
    Awaiting your replies.
    Regards
    Samier Danish

    there is no extra ship-to party.
    the whole logistics customizing is between receiving plant (which is ship-to ) and sending plant (vendor).
    the sold-to does not really play any role, except it is identical with the bill-to party, this one is then mentioned in the EDI settings for invoice exchange.

  • STO outbound delivery

    Hi Friends,
    h3.While using VL10B T-CODE am geting the following error when i run background "at least one order was blocked and h3.could not be delivered"
    h3.shipping data tab is present in STO PO and customer number is maintained aswell
    h3.my current stock level in supplying plant is sufficient aswell.
    h3.can i get some guidence please
    thanks

    Hi venkat,
    Can u please elobrate how to run in foreground..
    when i click on the notes tab after executing in background am getting 3errors
    1) material **** is not defined for sales from india
    2) shipping for sales org. *****, distribution channel ** from oplant **** is not possible
    3) delivery from plant **** for material PV06 is not possible

  • STO, MD04 - visibility of outbound delivery at receiving plant MRP

    STO raised:
    MD04[Supplying plant] - STO appearing
    MD04 [Receiving Plant] - STO appearing
    Outbound delivery created
    MD04[Supplying plant] - Outbound Delivery appearing
    MD04 [Receiving Plant] - STO appearing
    Goods issued
    MD04[Supplying plant] - None
    MD04 [Receiving Plant] - STO appearing
    How do Receiving plant know goods has been issued from supplying plant?? as MRP doesn't give any indication at receiving plant
    automatic Inbound delivery against outbound is only solution?
    Experts please help here
    Thanls

    Hi,
    In the MD04 screen when the outbound delivery has been PGI'd at the shipping plant the receiving plant will have an additional column showing up which holds the quantity that has been shipped.

  • Functon Module required for Creation of Outbound Delivery & PGI

    I am creating sales order. Now, I am creating outbound delivery using VL01N by passing Sales Order & Shipping point...and upon creation of outbound delivery doing a PGI...
    This can be done manually, but need to make it automatic, I mean on save of sales order i will do it. For this is there any FUNCTION MODULE which can be used so that using the Sales Order & shipping point it automatically creates Outbound Delivery & subsequently does a PGI.

    Havent tried, but please check if we can manage via combination of below BAPI's:
    1. BAPI_OUTB_DELIVERY_SAVEREPLICA
    2. BAPI_OUTB_DELIVERY_CONFIRM_DEC
    3. BAPI_ACC_GOODS_MOVEMENT_POST
    Will try myself, when i am back in office on Monday.
    Kind Regards
    Eswar

  • SU numbers in outbound delivery

    Dear all,
    I have following scenario: STO-Outbound Delivery-PGI-GR-TO
    In the delivery I have Su numbers informed in tab Items: Pallet Details, when GR is done via MIGO, then we execute LT06 for palletization, at this point we would like the system to take SU numbers in our delivery, however the system is creating new numbers.
    Is it possible to create this TO with SUs numbers included in our outbound delivery.
    Thanks.

    Hi,
    Does anybody have an answer?
    Thanks in advance.

  • Outbound delivery deletion with shipment cost settled.

    Dears
         I have one question about how to delete one outbound delivery which has one shipment document inside.
    Scenarios like:
         we do normal sales order -> outbound delivery -> Picking -> Loading -> PGI -> invoice. and also from outbound delivery to shipment document and shipment cost settled. that means everything is done.
       But next month, the customer said they do not need such goods, they want to return all and take money back. so we need to cancel billing , PGI , and warehouse transactions. as you know , the previous month already been closed. we could not cancel shipment cost settlement . actually, we do not need to cancel it because the shipment is done by 3rd party partner. we need pay the transportation cost.
    the problem, is when I use VL02n to delete outbound delivery item, it is not allowed because in document flow, there is one shipment document could not be deleted. but this outbound delivery status is OPEN, it always books some items which we will never delivery.
         is there one can help me about how to delete outbound delivery or how to close it to avoid stock booking ( ATP)?
    thanks
    jerry W.

    hello Jürgen L
    thanks for your answer. I fully agree with you. it is just our business user ( specially from warehouse) want to make process simple, so then use this way to cancel billing and PGI, then delete delivery lines. I will push them to use standard process .
    thanks again.
    best regards,
    jerry W.

  • Goods receipt not possible for outbound delivery...error code 4

    hi ,
    i created a stock transfer order.
    an outbound delivery was created.
    pgi was done..
    gr was done against this delivery.
    but this gr was then cancelled.
    now when i am doing gr against this outbound delivery.
    i get this eror message.
    Goods receipt not possible for delivery 1134930096: error code 4
    i have then reversed PGI of this delivery in vl09.
    then did PGI again.
    but still same error message.
    please help.
    regards
    shashank

    Hi,
    When system gave you the message with the error code 4, you can click on the message.
    There may be various reasons for the error of GRn agaist delivery -
    1) GRN already posted against the Delivery
    2) Delivery is deleted
    3) Delivery is currently processed by another user
    System gives you the detailed analysis aling with the codes. You can check what reason is mentioned for reason code 4.
    Regards,
    Prashant

  • How to validate Expiry Stock at Outbound Delivery level instead of checking at Goods Issue?

    Hello Everyone,
    The client wants us to validate Expiry Stock at Outbound Delivery level instead of checking at Goods Issue?
    What is the solution for this?
    Regards,
    Anwar

    Hi Moazzam Sir,
    I'm sorry for not explaining in detail. Actually, I posted the issue in a hurry. I apologize.
    Actually, the client has materials which has expiry date. They use Batch Management. They maintain expiry data (90 Days) in Shelf Life Expiration Date. Their requirement is: User is creating sales order in VA01. Then, he creates Outbound Delivery (OBD), then PGI. They want system not to create OBD, if the material has expired. They want some error message to be thrown whenever user is trying to create OBD for expired stock.
    Regards,
    Anwar

Maybe you are looking for