STO sometimes not showing shipping point

I have some scenarios where creating STO where line one has a shipping tab and then add line two same plant the shipping tab does not show.  If i remove the plant and add it again it populates or if i delete the line and add it again it populates.  The plant is set up as a vendor and customer.  It happens quite a bit but i can not recreate it.
Thank you

Hi Mark,
there are different kind of shipping data determination for STO.
for example, STO within the same plant, but different storage location, between different plant and etc.
If it is within the plant, then you need to check if shipping data has define for the destination storage location,
if it is between 2 different plant, then you need to check if the shipping data has maintained for the destination plant-storage location.
Do let me know what is your process for this STO?
Thanks and regards
Chee Wee

Similar Messages

  • OVL2 Is showing not maintained shipping point determination even i have maintained

    Dear SD Experts  ,
    It seems Basic question but i have maintained all settings properly but still issue is same please let me know
    Issue is while creating sales order in VA01
    And i have properly maintained In OVL2
    But when i have checked in OVL2 That information is not Populating, but when trying to Maintain New one again but system is showing all ready Maintained
    Here showing Like not maintained even i have maintained
    CMR, And VOV8 Also same Maintained
    MMR
    Finally assigning plant to shipping point
    So tell me why OVL2 Is showing not maintained shipping point determination even i have maintained
    Even Not Maintained OVL2 Shipping point details combination for plant system is showing
    Any entry is maintained all ready ,,
    Side Note : Recently Installed Ides and Doing testing on this so some time First time this problem is coming ?

    Dear Venu Gopal,
    Here while creating configuration in you IDES system , you taken existing 1000 as company code and under that you created your plant and shipping point . sometimes while creating or assignment of plant, sales origination ,distribution channel, shipping point you taken reference and created your own plant, sales origination, shipping point  at that time shipping point determination also taken as a copy and created . so you got this type of error . these type of errors will occur usually while copying .
    so kindly select the particular line item and delete then save ,after saving then you create your own then only system will accept other wise it will show this error .
    see the below screen shot .
    Regards,
    C.B Reddy.

  • Intercompany STO - PO not showing in VL10B

    Dear all,
    In my company I have an intercompany STO between 2 plants A and B.
    However, when I try to run transaction VL10B, the PO is now showing.
    To solve the problem I tried to remove the dates and shipping point in VL10B without sucess.
    I have checked the PO and I have the shipping tab there for all the materials. I have also checked if the PO needs to be released and it's already released.
    I also notice that the products that are being ordered do not have sufficient stock to be shipped. Can this be the reason why the PO is not showing in VL10B?
    Thanks in advance for your help.
    Joã

    Dear all,
    Thanks for your answers but both of the solutions had been tried before without sucess.
    I thank you in advance for any other ideas.
    Thanks,
    Joã

  • Camera tracker solving without errors but not showing result points

    hi
    I am trying the new camera tracker in AE cs6,
    im using very simple shots that can be tracked easily,
    and im having some strange behaviours,
    basically in many shots the analysis takes places with no errors but after the camera solve no result points appear, even if i use the advanced mode , changing all other parameters etc, and no errors are reported anywhere, also i select the effect on the panel and i also make sure the points size parameters are scaled up,
    but if i click on processing points (the unchecked box below 3d solve) i can see they are all there, and i can also create camera and the camera is created, so its as if all the process takes place correctly but for some reason the solve points are not shown on screen
    it has happened to me that with same shot sometimes they appeared and sometimes not, but most times they dont
    what can be happening in here?
    thanks so much

    will try to explain better my problem
    if i click on
    Render Track Points
    i can see there are great track points that follow all the movement perfectly,
    and yet without checking that box no solve points appear, even when i select the effect on effects panel
    or change any other parameter or do the advanced mode
    i can still click on create camera etc, but i cannot attach a text etc to a specific solve point because no solve points appear
    and yet as i say, if i click on the Render Track Points box i can see great tracking points all over the place following the action
    so the fact that selecting Render Track Points on effects panel shows great perfect points following all , does that confirm that camera solve was successful?
    i just cannot understand why i cannot see any solve points that i can interact with
    i have tried to scale sizes all the way up, select effect on panel and hundred other things
    thank you for any help

  • TS2518 I have Aperture 3.1.2 running on os 10.6.8. Aperture does not show focus points on my Nikon D7100, nor does it recognize the RAW files. Will upgrading Aperture allow me to see the focus points and RAW files again? Also, do I need to upgrade my os f

    I have aperture 3.1.2 running on os 10.6.8 mac book pro. Lost some features in aperature when I upgraded my camera (no longer shows focus points, does not recognize RAW files) Would like to upgrade to aperture 3.5, but do not want to loose any pictures in my extensive library. Do I have to upgrade one vesion at a time, or can I jump? I believe I also need to upgrade my os, but not sure which to do first?  Any help would be appreciated...

    1. Can I get Icloud without having to upgrade to OS Lion?
    Nope, you need 10.7.
    2. If I upgrade to OS Lion, does this automatically put me onto ICloud
    No, you set that up yourself.
    3. I have three mobile me email addresses. One for myself, one for my wife and one I use for my business. What happens to these.
    You can convert them to be used in iCloud.
    4. My wife and I also use mobile me to sync our calendars across an Ipad (original) and two Iphones (3Gs). Both Iphones and Ipad are still currently using IOS4, and I am reluctant to upgrade this to IOS 5 as I have heard some horror stories. If I fail to upgrade to IOS 5, will this create confusion with my Apple ID's. (There already is a lot of confusion with these- Apple appear to not have down their homework)
    If you don't change the settings you have now, I'm sure it will stay working.  I believe Apple is phasing out MobileMe and you'd be forced to upgrade eventually.
    5. Will Icloud allow me to transfer my Icalendar across seamlessly? This is Ical 4.04 whic came with my Imac. Does this get upgraded if I update to Lion?
    Yes, it will get upgraded.  I have my calendar on Lion and my iPhone 5.0.1 working seamlessly at the moment.  That doesn't mean you won't have problems because with new technology that can be expected.  Make sure you do a back up if you're worried about losing data.

  • Adobe Connect does not show tool pointer/cursor when sharing Photoshop...

    I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
    I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
    This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
    Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
    Thank you

    I just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.

  • Braille display not showing bullet points in pages.

    I'm trying to help out a blind friend of mine. She has a mac, and needs to use a word processor on a daily basis. The problem is that her braille display doesn't show bullet points, and text properties such as italic or bold. She has tried openoffice, but there, VoiceOver doesn't say anything, probably because it uses a different UI kit.

    I would recommend trying TextEdit and Nisus Writer as well, as sometimes these are superior to Pages.

  • Yahoo email will sometimes not show graphics, but shows numbers

    Sometimes in an email, the graphics do not show up, but does show numbers (address, I think). If I forward it (yahoo mail) then the graphics do show up. I tested and this does NOT happen using Internet Explorer. I have 2 laptops, both running Firefox 6.0.2 - both Windows 7, one 32 bit and one 64 bit OS. Usually the graphics do show up.

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    Make sure that you do not block third-party images permissions.default.images
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Data sometimes not showing

    Hi All,
    I have a strange problem.
    I have made a workbook with multiple sheets. Some of these sheets report on the same field from the database. I now have the strange issue that sometimes in one of the sheets the field is filled while in another sheet it isn't.
    Reopening the workbook and navigating to the sheet which wasn't showing values solves the problem.
    Is this a possible bug?
    I'm using discoverer desktop 10.1.2.48.18
    Patrick

    Hi
    You're right with regards to Java. Because you are using Desktop this is not applicable so we can rule that out.
    You're memory looks fine, at least on the surface. Other factors could be the number of worksheets you have in the workbook and what other applications are running on the PC at the same time. If you have a lot of worksheets, greater than 5, then this could be your problem. In this case you would need to reduce the number of worksheets by splitting the workbook into two or more separate workbooks.
    By the way, the version of Desktop that you have is not the most recent. The most recent is the 10.1.2.2 version which will upgrade you to 10.1.2.54.25
    Best wishes
    Michael

  • Wifi card sometimes showing sometimes not showing up in device manager

    Recently on startup my wifi connection sometimes does not appear and when i go into device manager it does not seem to be there at all. Through some research it could be that my inbuilt wifi card is dying? I might have to reboot my laptop 6 times before it miraculously seems to work. Does anyone know what could be causing this? Do i need to buy a new wireless card? Thanks.

    Hi there ,
    Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have looked into the issue you are having with your WiFi connection disappearing on your HP Pavilion DV6 6B00 Notebook with Windows 7. Have you tried to connect the Router directly to the Notebook? Here is a document I found called HP Pavilion dv6 Notebook PC Maintenance and Service Guide. In this document it will show you where the Wireless Network Card sits and how to reseat the card. Sometimes this can help reset it with the Notebook. The other document that I found for you is called Troubleshooting Your Wireless Network and Internet Connection for Windows 7. I am also attaching a link to update the Drivers for your HP Pavilion DV6 6B00. This link is from the HP Website and there is an updated Intel Wireless Drivers for Microsoft Windows 7 driver available.
    Please follow these provided troubleshooting steps, re-post and let me know how everything went.
    Thank you! Have a great day!

  • BW Hierarchies sometimes not showing as pick list

    Hi,
    we have created a Crystal Report that uses a parameter that should be picked from a BW hierarchy (a cost center group). We created the report and published it via the BW publisher to BO and then included it with an iView in the BW Portal.
    Now when I log on to the portal and call the report, I'm presented with the static pick list (top 200 values) most of the time instead of the hierarchy view (as described in http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements in the lower part of the article)
    When I then log on to the CMC and call the report there, I first get the flat list, too, but when I call the report 2 or 3 times, I get the hierarchy view. When I now go back to the BW Portal, I get thet hierarchy view there as well...
    any idea what causes this issue? How can I influence which selection screen is being displayed? (particularly as I don't want everyone to have to log on to CMC first...)
    Thanks...

    Hi Duncan,
    thank you for your reply. It's really sort of tricky.
    After the pick list is up and ready once, It'll be shown fine from that point on until, I assume, my CMC login expires.
    So maybe it's some permission problem?
    I just tested the following:
    <ul>
    <li>log into portal, call report -> flat list
    <li>log into CMC -> call report (does not have to be the same, just has to have a hierarchy pick list, a simple report does not do the trick) -> check that it has the hierarchy pick list
    <li>go back to the portal, call the report again -> hierarchy pick list comes up ok
    <li>log off from CMC
    <li>go back to the portal, call the report again -> flat list again...
    </ul>
    the whole thing works the same when I replace CMC by InfoView. The strange thing is that I have to log in to Infoview the first time I call the report from the portal (even though we have SAP credentials in BO), but this does not seem to be sufficient. I have to call one of the reports in Infoview or CMC first to make it work from the portal.
    Concerning the trace, I'll have to look into this together with our sysadmins, but I'll see what I can get.
    Thanks again for your ideas,
    cheers
    MU

  • Why is the text of original message sometimes not showing up?

    I only notice this occasionally, I have my prefs set for quoting text. But sometimes it seems to include only a small part of the original text when replying, I haven't figured out what the difference might be. It's not HTML mail either.
    Thanks for any help.

    Rklahn,
    That's actually the way it's meant to work.
    If you only want to quote part of the message you are replying to, you select a portion of it.
    If you want to quote the entire original, you don't select anything in the message.
    Does that make sense?

  • Why does Firefox SOMETIMES not show the AVG toolbar

    I have Firefox 14.0.1 and when I open it SOMETIMES the AVG toolbar is not there but sometimes it is. When it is not there the space for it to be in is there but nothing is in it. This happens often and I have to open another Firefox screen and go on doing so until one with the AVG toolbar appears

    Do you need the AVG toolbar? Some people have reported that it causes problems with Firefox.

  • In STO Process How can i Change the shipping point manually

    Hi,
    I need clarification in STO process, shipping point determined automatically based on ovl2 setting like Shipping condition from customer master loading group from material master plant in the line item.(here the shipping point is1000.)
    In my scenario it picking correctly shipping point(1000) even i have maintained manually shipping point(1200) in ovl2 but when i am creating STO document UB change shipping point at item level in shipping tab system allowing the manual shipping point (1200) but when i enter or save the document system overwrite 1200 to 1000,system consider only automatic determination  in shipping point (1000)
    Can you please help why i am not able to change the manually shipping point 1200( even i maintained  in ovl2 manually shipping point 1200)

    Sending a calendar to another country is not supported in many jurisdictions - as it can lead to extra charges for the receiver. As I have no idea what country you are in you can select your country from this list
    http://store.apple.com/us/help/print_products/routing
    And find out if it's supported in your country and to your chosen destination.
    Regards
    TD

  • Stock Transport Order (STO)will not create delivery

    I have created a intercompany Stock Transport Order (STO) and it has created the shipping tab in the Purchase order(PO), and all seems to be correct.
    I have material in the plant, yet when I go to create the delivery using VL10G, the PO does not show as a choice. I also do not get an error, so I cannot tell why it is not creating the delivery.
    Is there a way to see an anaylis of why the STO is not showing as a choice?
    Thanks,

    Hi,
    Please check the delivery date in the STO created.and adjust the del creation date etc input fields at VL10G and try the posting.If there exists no error in the po created.

Maybe you are looking for