Stock destroy for Sales order

Dear All,
We are using MB1B - movement type 411 E for stock destroy of sales order. But we want to destroy all the sales order in only one transaction.
Is there any way to do it ?
Regards,
Sandip

I don't feel there is any mass transaction for this.
Try LSMW.
Thanks & Regards
JP

Similar Messages

Stock reserver for sales order

Dear All
1. MMBE-Check the stock with batch no 6000000340 with 200 qty
2. Sale Order Created-
3. MB1B - Used Movement type 412 E with Inputs such as Sales Order,[warning message: sales order is not provided for this goods movement] after pressing the document is posted
4. In MMBE When i check the stock under batch no 6000000340 with 150 qty in unrestricted stock and Sales order Stock i can see the 50 quantity stock
Query is
1. Why the 50 quantity stock which is reserved for Sales order stock is seen under unrestricted stock and not under Reserved tab
2. When i create delivery with the same material and batch no, the stock is reduced from unrestricted stock[150 -10delivery qty] = its showing 140 qty, but stock should be reduced from 50 quantity which i have reserved for Sales order.
Please guide
Regards
Sandeep Bhowmick

Hi Sandeep
Visualize this scenario
Material is pen in MMBE unrestricted stocks is 100
Sales order created with item cat TAN with special stock indicator E not marked and the order no is say 55 for 10 qty
Now you are reserving stocks in t code MB1B with movement type 412 E inputting the order no xx and saving it
Now in MMBE put the material as pen and input plant and storage location etc press F8
unrestricted stocks will be 90
Sales order stocks will be 10
If you click on the details of this sales order stocks you will see the order no xx and qty will be 10
(read your first post exactly the same of this)
now are delivering the sales order and doing the pgi
Now in MMBE
unrestricted stocks will be 80
Sales order stocks will be 10 (this exactly is your problem)
that means the system having a reservation in MMBE for a particular sales order xx not utilizing those stocks and still takes the stocks from the unrestricted and this is wrong
This is happening because the item cat TAN is not marked with special stock indicator E during order creation of xx
Now mark the item cat TAN with special stock indicator E and create a fresh cycle say order no yy
When you do PGI for order no yy the unrestricted will be 90 and there wont be any sales order stocks as the stocks are already PGIed
That means the system picks up the correct stocks for delivery
The system behaves very perfectly When there is sales order stocks in MMBE i dont understand ,what is the reservation you are talking about
Regards
Raja

Stock reservation for Sales Order

Dear Friends,
My requirement is to reserve the stock for a particular sales order.
Material is Make to Stock.
I tried with transaction code MB1B/MB1C/MB1A with movement type 412E/561E/232E for a particular sales order.
If I view stock overview with transaction code MMBE,I can see the stock is reserved for a particular sales order.
Now when I am creating delivery for this reserved stock with reference to another sales order,delivery is created.Logically it should not happen.Delivery should create only with reference to particular sales order for which stock is reserved.
Here I checked OVZ9 and ensured tick is for include sales reqmts.
Special stock is blank for sales order item category.Transaction code is VOV7.
If I make the sales order item category as E and if I am trying to create a delivery for sales order for which stock is not reserved system does not allow to create delivery.
Please suggest me how to meet my requirement.I want to reserve the stock (Make to stock) only for particular sales order.
Thanks in advance.
Regards,
Shrikant

Dear santosh/Kapil,
Thank you very much for your immediate reply.
Santosh stock is getting reserved but still I can despatch this reserved stock against a sales order for which this stock is not reserved.
Details are as below,
Material---- ABC,Batch is xyz,batch quantity is 2 TO
Sales orders are 111,112,113,114 and so on.
Now as per your advise I have done the reservation for SO 111 for material ABC for batch xyz.
When I checked MMBE it shows that material ABC of batch is reserved but I could not see SO number here but yes in reservation I could see the sales order number.
Now I tried to create the delivery for SO 113 for which the batch xyz is not reserved it is reserved for SO 111.But still I could create delivery for SO 113 for batch xyz.
I mean batch xyz is reserved for SO 111.
Am I missing anything here.
Dear Kapil,
I do not want to reserve the entire order quantity of sales order.I mean only on few ocasions I want to reserve the stock.
I mean today I want to reserve partial quantity of sales order.
Regards,
Shrikant

Stock allocation for sales orders with batch job

Hi Friends
We have a batch job to allocate stock for sales orders which runs every week , currently this batch job is meant for plant 1000 with availability check procedure Z1 .
I need to incorporate for same batch job plant 1000 with availability check procedure Z2
Just I need to know that there is any potential impact and it causes any problem ?
Thanks In Advance
Rusheek

Hi,
Check what difference is between procedure Z1 and procedure Z2. As we cant see this, you will have to analyze what Z1 was doing and what Z2 is expected to do. Broadly speaking this is preety subjective to your project.
You analyze and try to find out the impacts. If needed take help of abaper.
Rgds,
SB

Stock booking for sales orders using APO gatp

Hello Experts,
We are having similar case as YR, for which I'm searching for a solution. > (Putting this in a separate thread so that I can reward points)
We have certain sales orders (which are created on portal) for which we need to book stocks. These orders have different ord type. We want to give priority to these sales orders against existing/upcoming stocks. (For these orders, no customer master exists, kind of one-time).
Requirement is - Portal orders are placed according to the updated stock on portal (frequent run programs). But at the time of actual delivery creation, it happens that no stock available for the order and existing stock 'robbed' by other sales orders/deliveries meanwhile. We want to give 'portal orders' more priority than other normal orders/STOs.
We have receipt elements in Purchase orders only and no production orders. Also, portal orders are not subjected for gatp check, once the order is saved, a sales order is triggered & created in ECC (XI/PI) against dedicated Plants/Warehouses.
We have gatp and trying to find solution for it. Could you please guide how to book stocks for these 'priority orders' against existing unrestricted-use stock & against upcoming purchase orders?
Thanks a lot!

Hello Babu,
Thanks for your inputs. I would like to get into more details of what you mentioned about delivery priority. In my case, any customer places online order on webportal (based on current stock on portal which we frequently update through programs) and once the order is saved, a Sales order is created in ECC for a "one time customer" (there are hardly 2-3 customers for the e-orders), for which gatp check happens and stock is assigned as per availability and delivery date is assigned. So basically issues are
1. Order in ECC should be placed with successful gatp check & confirmation - chances are of stealing stocks in between the 'time gap' of stock update on portal & order placing till order creation in ECC with gatp check >> for this we are working on stock update programs.
2. Once delivery date is assigned to the order after successful gatp check, during the time of delivery creation, there are other STOs which steal stocks & create outbound deliveries before the portal order. Here we want to stop the 'robbing'.
So looking at this aspect, could you please elaborate the point of -
"Since you have a different sales document type, why don't you assign a higher delivery priority to these orders during ATP check ? You can influence the default delivery priority that comes from customer master to a very high delivery priority just before the ATP check ( use field catalogue user exit ) and pass the high delivery priority to APO"
And how can we use field cataloguser exit?
And ya, we may not need ROC, as there will be no one ready to 'Donate' But thanks for highlighting the option as well..
Thanks

Stock determination for sales order stock

Hi all,
for our SAP retail solution - we have requirements for moving Consignment stock to Sales order stock for home delivery . Then Sales order stock needs to be withdrawn for inter company 643 movement . The stock determination is maintained as K first & then F with relevent settings in SPRO & article master, for consignment article -when sales order stock exist & delivery is created for intercompany PO with sales order on account assignment to transfer stock from Store to DC, SAP error message is not allowing to post Goods issue.
What settings do we need to maintain for this to happen to withdraw from Sales order stock for consignment article ? Any help or information is highly appreciable.
Thanks
Krish

This is the error message :-
After calling stock determination, a quantity of 1.000 EA remains open
Message no. WRF_CONS013
Diagnosis
During consignment processing in SAP Retail, the system called stock determination in order to decide which stock category should be used to take material 000000001000009740. However, the stock determination routine did not find enough stock in the relevant stock categories (as defined in the strategy). A quantity of 1.000 EA remains open.
Please note that stock determination ignores the Negative Stocks Allowed setting.
Procedure
Check your stocks and settings for stock determination for material 000000001000009740 in plant 3001. Post stock transfers if necessary

Stock determnation for sales order stock

Hi all,
for our SAP retail solution - we have requirements for moving Consignment stock to Sales order stock for home delivery . Then Sales order stock needs to be withdrawn for inter company 643 movement . The stock determination is maintained as K first & then F with relevent settings in SPRO & article master, for consignment article -when sales order stock exist & delivery is created for intercompany PO with sales order on account assignment to transfer stock from Store to DC, SAP error message is not allowing to post Goods issue.
What settings do we need to maintain for this to happen to withdraw from Sales order stock for consignment article ? Any help or information is highly appreciable.
Thanks
Krish

Hi,
It seems in delivery in picking tab automatic storage location not determined.
If not determined Please do settings in SPRO>Logistics Execution>Shipping>Determine Picking Location>Assign Picking Locations.
Before doing above step whether the item category is relevant for picking or not ?
Hope this would help.
Regards,
JS

Vendor consignment stock return for Sales order

Hi,
For Home delivery Sales order- Sale is being performed from Vendor consignment stock & it works good with 601K movement .For Return in this case, Return sales order is created & PGR is performed against delivery.While doing this - the returned consignment material goes to unrestricted blocked stock. But we need this to go back to Consignment stock.
Can any one suggest a solution on this ?
Thanks in advance for quick solution, sharing your inputs
Krish

Hi,
You can always use the 412 K mvt to do a manual posting back into consignment stock.
Regards,
MdZ

STO for sales order stock

Hi All
If I am not mistaken, one cannot do a STO for special stock using 2 step transfer, however it is possible in a one step process.
I have made the setting in config to use a one step process, and it have been set up to use movement type 647.
I am trying to move Sales order stock from one plant to another plant, and want to maintain it as special stock.
I can get the process to create the delivery, however, when I try and post goods issue the delivery document, I get the following message.
MSSA-SABWE exceeded by 2 EA: CISCO1402 ZA30 1000 SALEABLE E
Cisco1402 is the material
ZA30 is the plant
1000 is the storage location
Saleable is the split valuation we using
E is the special stock indicator for sales order stock.
If anyone could please give me some direction.
Thanks

Hi
We are not using blocked stock at all in any of our processes.
My understanding is that movement type 647 will not look or put stock into blocked stock.
If I look at table MSSA, for that Sales order number and material number, it comes up with one entry. It has a quantity of 2 in unrestricted, Val. GR Blocked Stck is 0.
Should the quantity of 2 be appearing in there?
So the process followed thus far is:
Sales order raised
Preq auto created from SO
Preq converted to PO
GR for PO
STO created to move sales order stock from one plant to another
Delivery created,
cannot post goods issue.
Thanks

Requisitions for sale order stock

Requisitions for sale order stock that are generated directly from the
sales order are not passed to SRM but requisitions that are created
manually for sales order stock are passed to SRM.
Why is the sourcing of a requisition for sales order stock where the
requisition was created directly from the sales order not supported?

Hi,
We need same requirement, we found only PR's with item category "5"(Third party ) created from sales are transfered to SRM.( It is hard coaded in ECC).
Let us know if you are able to resolve your issue.
Thank you
Sreedhar Vetcha

Goods Receipt for sales order stock

Hi everybody,
I want to receive materials for sales order stock. what I did:
1- Created a Purchase order,
2- Account Assignment = C
3- went to MIGO
4- selected PO number
5- set movement type 101 / E
the SAP give error message that you have not planned 101 / E !!!!
I searched alot but couldn\t find the solution.

Hi Dear,
When you use C account assignment category, System will consume those materials/services for the respective sales order at the time goods receipt/service confirmation. There is no inventory possible when we use, account assignment C as a standard, If you want to make inventorize, we have to choose account assignment category M against sales order.
When we are procuring material against project, Account assignment Q-will be inventoried and P-will be consumed for respective cost object
Like the same M-will be inventoried and C--will be consumed for respective cost object
R,
Amala Srinivasa Rao

Stock confiramtion at sales order level for future date- Availability Check

Hi all
Here is the scenario
This setting is available in the system:
Stock is available
Sales order created with Requested delivery date in future-> not confirmed
Sales order created with Requested del date today -> confirmed
The requirement :
how and where to change this setting in IMG so that also orders with Requested Delivery Date in future are confirmed if stock is available.
As this is urgent request to respond quickly.
Regards
Devender

Hello Devender,
You can achieve the mentioned scenario by configuring ATP. You can do ATP with RLT or ATP without RLT.
In ATP with RLT, system will check and confirm the quantities from existing stock only and if quantities are insufficient then the system will consider inline POs or manufacturing time to confirm remaining quantitites.
Else you will be getting schedule lines for only items in stock and remaining will be unconfirmed as ATP without RLT will be activated i.e., system will check and confirm the quantities from existing stock only.
Types of Availability Check in Sales and Distribution
Processing
There are three types of availability check:
_ Check on the basis of the ATP quantities
_ Check against product allocation
_ Check against planning
The following SD-specific control features need to be maintained in Customizing:
_ Checking group
The checking group controls whether the system is to create individual or collective
requirements in sales and shipping processing. In addition, a material block for the
availability check with transfer of requirements can be set here. The checking group can
also be used to deactivate the availability check. This option was created especially for
the assembly order so that when the bill of material is exploded in the assembly order,
the individual components, if necessary, can be classified as non-critical parts as far as
procurement is concerned.
The checking group specifies in combination with the checking rule the scope of the
availability check. It is proposed in the material master record on the basis of the material
type and the plant, and copied into the sales and distribution documents.
_ Checking Rule
You use the checking rule to control the scope of the availability check for each
transaction in sales and distribution. You also specify whether the check should be
carried out including or excluding replenishment lead time. The individual checking rules
define by transaction, which stock and inward and outward movement of goods should
be taken into account for the availability check.
_ Schedule line category
You can control with the schedule line category whether an availability check and
transfer of requirements should be carried out in the sales documents. The possible
settings for this at schedule line level are dependent on the settings in the requirements
class which is determined from the requirements type of the material.
_ Delivery item category
The delivery item category can be used to control whether an availability check takes
place in deliveries.
Requirements type
The various requirements are identified by their requirements type. The requirements
type refers to the requirements class and its control features.
_ Requirements Class
The requirements class contains all control features for planning such as relevance for
planning, requirements planning strategy and requirements consumption strategy. In
addition, it is specified at a global level whether an availability check is to take place for
the material in the sales and distribution documents on the basis of the ATP quantity
(ATP = available to promise) and whether requirements are to be passed on. A finer
degree of control can be obtained for sales documents using the schedule line category.
Replenishment lead time is only included in the check performed on the basis of the
ATP quantity.
Prerequisites
An availability check can only be carried out if the following prerequisites have been fulfilled:
_ The control elements described above for the availability check must be maintained in
Customizing for Sales and the relevant assignments made to the sales transactions
_ The availability check must be switched on at requirements class level and - for the
availability check in the sales documents - at schedule line category level
A requirements type must exist by which the requirements class can be found
_ A plant must be defined. It can either be proposed from the customer or material master
record or can be entered manually in the document.
_ A checking group must be defined in the material master record on the Sales/plant data
screen in the Availability check field
Configuring entries of the Availability Check
IMGSDBasic fncsAvailability check and TORAvailability checkAvailability check with ATP logic or against planningDefine checking groups
You can use SAP std checking groups of 01 for summarized reqts or 02 for daily reqts or u can create ur own.
The columns total sales and total deliveries are selection options whereby u can configure a checking rule to sum up reqts to post to MRP either individually or by day or week.
Column 5, Block qty; set this block if u want several users to be able to process the material simultaneously in different transactions without blocking each other. The No Check indicator is used when u want a material to not be relevant for an ATP check.
Defining a material block for other users. The Block checkbox is an indicator that enables u to block the particular material from being checked for availability if it is already being checked at the same time by another user.
Defining the default value for checking groups. However should no entry exist for the checking group in the material master record, one can set a default value per material type and plant.
Controlling the availability check. In this section, u tell the system what stock on hand and what inward and outward movements of stock it must take into account when performing the availability check. These settings are based on the checking group that is assigned to the material master record and the checking rule that is predefined and assigned to the sd transaction. The carry out control for the availability check must be maintained for both the sales order and delivery.
Reward points if helpful.
Regards,
Priyanka

Create STO for sales order stock

Hi,
My client requirement is to move the sales order stock from one plant to another plant using STO. We have STO scenario for cost center, but we don't have for sales order stock.
Could anyone tell me about the missing config for sales order stock.
Thanks and regards
Durai

Hi Durai,
In the shipping data for plants change the DistChannelIB to Intercompnay OR cross plants for each of you plant.
Hope this helps!
Abhi.

Reserve stock for sales order

Hello SAP Guru,
in my case i am using MTS scenario. Now i want to reserve stock for the Specific Sales order. I have done the reservation by 231 mvmt type now material is showing under reservation. but while doing delivery for the same SO system not picking the stock from the reservation only picking from unrestricted stock now tell me how to do the delivery from the reservation stock?
With regards,
dev123.

Hi Lakshmipathi,
As per your suggestion, I tested and found it working properly. But now if i want to divert the stock to other sales order even after i have created and saved delivery,
in OVZ9,
will I need to only deactivate Include Deliveries check box in inward / outward movements ????? or something more I will have to do?
And,
What is the use of reservation then that we create in MB21 against 231 movement type which is GI for Sales Order. Cant I use that ??
Kindly advice on this
regards,
Sagar

"Not possible to determine account for sales order or project stock"

Hi,
I get this error when trying to create a purchase order (type EUB). I think I should define a new account for sales order. How should I proceed?
Thanks in advance.
Luis.

Hi
1) Check the spro-MM-purchasing-account assignment-Maintain account assignment categories -
Here check the account modifications against Account assignment category C,P
2) Then go to OBYC -GBB check the account maintained against the account modifier obtained in step 1
Regards
Sandeep

Stock destroy for Sales order

Similar Messages

Maybe you are looking for