Stop action doesn't work
I have a simple website with five pages set up. There is no
code other than the code on the first frame, plus a stop action on
each section. The first thing in the code is the stop action, but
it still keeps running through all the frames when I test it, and a
movie clip set up in a similar way does the same thing. What could
be causing this? I tried taking all the code out of frame 1 except
the stop action but it didn't make any difference. I am starting to
work with actionscript 3.
thanks
yes i think you problem is the publish setting ... you are
still set to publish as2... change it as3 .....
and this code is even cleaner that the prev it work well too
stop();
var btnArray:Array = [HOME,GROUP,REVIEWS,CLIENTLIST,LISTEN];
function moveTo(e:MouseEvent) {
var page:String = e.target.name;
gotoAndStop(page);
for (var i:Number = 0; i< btnArray.length; i++) {
btnArray
.addEventListener(MouseEvent.CLICK, moveTo);
Similar Messages
-
Stop(); Action doesn't work in AS3?
I'm a designer and usually work in AS2.
But I created a movie in as3 (to use the Bones function), and now my stop actions are not working.
What I usually do for my movies is break the movie down in parts on the Main timeline (Start/Content/End), place stops on each of these frames.
And within the Movieclips that play on these labels I put a call:
stop();
_root.gotoAndPlay("Content") etc...
Anyways any fixes for this in AS3?
I'm using CS4 if that matters.The stop() command works as well in AS3 as it does in AS1/2. What doesn't work is using AS2 terms like "_root". In general, if a stop() command is not working it is because some other code is failing or otherwise overriding the stop().
-
Okay, it doesn't matter what I do end action doesn't work. Here's the situation. I have three timelines. The Title for starting, the main video, and the credits rolling at thend. When the Title timeline is done playing at the end, it should go to the main video and the main video timeline is done, it should go to the credits but it's not working. In each of the End action of three timelines, I did specify where it should go next. But this doesn't work. So I try to specify where it should go next on the End Action of the last chapter for three timeline but that doens't work either. So I tried specify in the last chapter and also the timeline end action and nothing changes during preview. Please help.
Stupid question:- what exactly does the override do? Override the remote control action, or the end action or both?
Linking each chapter to the next, and the next timeline, allows for the whole project to play continuously, but the end action on the final chapter is always messing things up. -
How to reboot a guest domain when hung and ldm stop-domain doesn't work
Hi, the configuration is as follows.
SF T1000 (32 threads/16gb) memory
Latest Firmware and the LDOM patch (-02) applied.
This is how the LDOMs are setup.
Instance CPUs Memory
Service domain 4 2g
ldom1 4 2g
ldom2 4 2g
ldom3 4 2g
ldom4 4 2g
ldom5 4 2g
ldom6 4 2g
ldom7 4 1.9g
All guest domains are running on disk-images on mirrored BE on service domain. Size around 7 gb and SUNWCXall installed.
However, I have had a few hangs, especially when working over the virtual switch on the domains.
At the moment ldom1 is totally hung. See below for info:
bash-3.00# ldm list-domain
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 2G 0.5% 1d 1h 17m
ldom1 active -t--- 5000 4 2G 25% 2h 14m
ldom2 active -t--- 5001 4 2G 0.2% 2h 35m
ldom3 active ----- 5002 4 2G 0.2% 47m
ldom4 active ----- 5003 4 2G 0.2% 1d 1h 10m
ldom5 active -t--- 5004 4 2G 0.3% 1d 1h 10m
ldom6 active -t--- 5005 4 2G 0.2% 1d 1h 10m
ldom7 active -t--- 5006 4 1900M 0.2% 7h 29m
bash-3.00#
bash-3.00# ldm stop-domain ldom1
LDom ldom1 stop notification failed
bash-3.00#
bash-3.00# telnet localhost 5000
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connecting to console "ldom1" in group "ldom1" ....
Press ~? for control options ..
<COMMENT: ~w sent!>
Warning: another user currently has write permission
to this console and forcibly removing him/her will terminate
any current write action and all work will be lost.
Would you like to continue?[y/n] y
< COMMENT: I don't get any response when hitting enter and ~# (break) doesn't seem to work....>
I cannot ssh to ldom1 since it appears to be dead!
Anyone know if I can send some sort of reset to this hung domain? How can I troubleshoot it?
Regards,
DanielUPDATE 2
=========
When I attached to ldom3 through the console services, this domain also had
hung.
Below is some LDOM information.
bash-3.00# ldm list-services
Vldc: primary-vldc0
Vldc: primary-vldc3
Vds: primary-vds0
vdsdev: vol1 device=/ldoms/be/ldom_1.img
vdsdev: vol5 device=/ldoms/be/ldom_5.img
vdsdev: vol6 device=/ldoms/be/ldom_6.img
vdsdev: vol7 device=/ldoms/be/ldom_7.img
vdsdev: vol2 device=/ldoms/be/ldom_2.img
vdsdev: vol3 device=/ldoms/be/ldom_3.img
vdsdev: vol4 device=/ldoms/be/ldom_4.img
Vcc: primary-vcc0
port-range=5000-5100
Vsw: primary-vsw0
mac-addr=0:14:4f:f8:66:9f
net-dev=bge0
mode=prog,promisc
Vsw: primary-vsw1
mac-addr=0:14:4f:f9:dd:53
net-dev=bge1
mode=prog,promisc
bash-3.00# ldm list-devices
vCPU:
vCPUID %FREE
MAU:
Free MA-Units:
cpuset (0, 1, 2, 3)
cpuset (4, 5, 6, 7)
cpuset (8, 9, 10, 11)
cpuset (12, 13, 14, 15)
cpuset (16, 17, 18, 19)
cpuset (20, 21, 22, 23)
cpuset (24, 25, 26, 27)
cpuset (28, 29, 30, 31)
Memory:
Available mblocks:
PADDR SIZE
0x3fec00000 20M (0x1400000)
I/O Devices:
Free Devices:
bash-3.00# ldm list-domains
Unknown command list-domains; use --help option for list of available commands
bash-3.00# ldm list-domain
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 2G 0.7% 1d 4h 8m
ldom1 active -t--- 5000 4 2G 0.3% 1h 24m
ldom2 active -t--- 5001 4 2G 0.6% 5h 26m
ldom3 active ----- 5002 4 2G 25% 3h 38m
ldom4 active ----- 5003 4 2G 0.1% 1d 4h 1m
ldom5 active -t--- 5004 4 2G 0.1% 1d 4h 1m
ldom6 active -t--- 5005 4 2G 0.7% 1d 4h 1m
ldom7 active -t--- 5006 4 1900M 0.1% 10h 20m
bash-3.00#
bash-3.00# ldm list-bindings
Name: primary
State: active
Flags: transition,control,vio service
OS:
Util: 0.5%
Uptime: 1d 4h 11m
Vcpu: 4
vid pid util strand
0 0 0.9% 100%
1 1 0.8% 100%
2 2 0.2% 100%
3 3 0.3% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x8000000 2G
Vars: reboot-command=boot
IO: pci@780 (bus_a)
pci@7c0 (bus_b)
Vldc: primary-vldc0
[LDC: 0x0]
[(HV Control channel)]
[LDC: 0x1]
[LDom primary (Domain Services channel)]
[LDC: 0x3]
[LDom primary (FMA Services channel)]
[LDC: 0xb]
[LDom ldom1 (Domain Services channel)]
[LDC: 0x22]
[LDom ldom5 (Domain Services channel)]
[LDC: 0x27]
[LDom ldom6 (Domain Services channel)]
[LDC: 0x2d]
[LDom ldom7 (Domain Services channel)]
[LDC: 0x10]
[LDom ldom2 (Domain Services channel)]
[LDC: 0x18]
[LDom ldom3 (Domain Services channel)]
[LDC: 0x1d]
[LDom ldom4 (Domain Services channel)]
Vldc: primary-vldc3
[LDC: 0x14]
[spds (SP channel)]
[LDC: 0xd]
[system-management (SP channel)]
[LDC: 0x6]
[sunvts (SP channel)]
[LDC: 0x7]
[sunmc (SP channel)]
[LDC: 0x8]
[explorer (SP channel)]
[LDC: 0x9]
[led (SP channel)]
[LDC: 0xa]
[flashupdate (SP channel)]
Vds: primary-vds0
vdsdev: vol1 device=/ldoms/be/ldom_1.img
vdsdev: vol5 device=/ldoms/be/ldom_5.img
vdsdev: vol6 device=/ldoms/be/ldom_6.img
vdsdev: vol7 device=/ldoms/be/ldom_7.img
vdsdev: vol2 device=/ldoms/be/ldom_2.img
vdsdev: vol3 device=/ldoms/be/ldom_3.img
vdsdev: vol4 device=/ldoms/be/ldom_4.img
[LDom ldom1, dev-name: vol1]
[LDC: 0xe]
[LDom ldom5, dev-name: vol5]
[LDC: 0x25]
[LDom ldom6, dev-name: vol6]
[LDC: 0x2a]
[LDom ldom7, dev-name: vol7]
[LDC: 0x30]
[LDom ldom2, dev-name: vol2]
[LDC: 0x13]
[LDom ldom3, dev-name: vol3]
[LDC: 0x1b]
[LDom ldom4, dev-name: vol4]
[LDC: 0x20]
Vcc: primary-vcc0
[LDC: 0xf]
[LDom ldom1, group: ldom1, port: 5000]
[LDC: 0x26]
[LDom ldom5, group: ldom5, port: 5004]
[LDC: 0x2c]
[LDom ldom6, group: ldom6, port: 5005]
[LDC: 0x31]
[LDom ldom7, group: ldom7, port: 5006]
[LDC: 0x15]
[LDom ldom2, group: ldom2, port: 5001]
[LDC: 0x1c]
[LDom ldom3, group: ldom3, port: 5002]
[LDC: 0x21]
[LDom ldom4, group: ldom4, port: 5003]
port-range=5000-5100
Vsw: primary-vsw0
mac-addr=0:14:4f:f8:66:9f
net-dev=bge0
[LDC: 0xc]
[LDom ldom1, name: vnet1, mac-addr: 0:14:4f:fa:1e:4d]
[LDC: 0x23]
[LDom ldom5, name: vnet0, mac-addr: 0:14:4f:f9:ae:a1]
[LDC: 0x28]
[LDom ldom6, name: vnet0, mac-addr: 0:14:4f:f8:27:b8]
[LDC: 0x2e]
[LDom ldom7, name: vnet0, mac-addr: 0:14:4f:f9:1f:5d]
[LDC: 0x11]
[LDom ldom2, name: vnet0, mac-addr: 0:14:4f:f8:c9:7c]
[LDC: 0x19]
[LDom ldom3, name: vnet0, mac-addr: 0:14:4f:fb:d9:6d]
[LDC: 0x1e]
[LDom ldom4, name: vnet0, mac-addr: 0:14:4f:fb:df:2c]
mode=prog,promisc
Vsw: primary-vsw1
mac-addr=0:14:4f:f9:dd:53
net-dev=bge1
[LDC: 0x2b]
[LDom ldom1, name: vnet2, mac-addr: 0:14:4f:fa:b1:f0]
[LDC: 0x24]
[LDom ldom5, name: vnet1, mac-addr: 0:14:4f:f9:b2:b0]
[LDC: 0x29]
[LDom ldom6, name: vnet1, mac-addr: 0:14:4f:fb:f5:c3]
[LDC: 0x2f]
[LDom ldom7, name: vnet1, mac-addr: 0:14:4f:f8:3a:3e]
[LDC: 0x12]
[LDom ldom2, name: vnet1, mac-addr: 0:14:4f:f9:88:a0]
[LDC: 0x1a]
[LDom ldom3, name: vnet1, mac-addr: 0:14:4f:fa:aa:57]
[LDC: 0x1f]
[LDom ldom4, name: vnet1, mac-addr: 0:14:4f:f9:33:59]
mode=prog,promisc
Vldcc: vldcc1 [FMA Services]
service: ldmfma
service: primary-vldc0 @ primary
[LDC: 0x4]
Vldcc: vldcc2 [SP channel]
service: spfma
[LDC: 0x5]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x2]
Vldcc: hvctl [Hypervisor Control]
service: primary-vldc0 @ primary
[LDC: 0x0]
Vcons: SP
Name: ldom1
State: active
Flags: transition
OS:
Util: 0.3%
Uptime: 1h 27m
Vcpu: 4
vid pid util strand
0 4 0.5% 100%
1 5 0.6% 100%
2 6 0.1% 100%
3 7 0.0% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x88000000 2G
Vars: auto-boot?=false
boot-device=/virtual-devices@100/channel-devices@200/disk@0:a vdisk
nvramrc=devalias vnet /virtual-devices@100/channel-devices@200/network@0
use-nvramrc?=true
Vnet: vnet1 [LDC: 0xb]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0xd]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0xf]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x4]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x6]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0x8]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:fa:1e:4d
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet2 [LDC: 0xc]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0xe]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0x10]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0x5]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0x7]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0x9]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:fa:b1:f0
service: primary-vsw1 @ primary
[LDC: 0xa]
Vdisk: vdisk1 vol1@primary-vds0
service: primary-vds0 @ primary
[LDC: 0x2]
Vcons: [via LDC:3]
ldom1@primary-vcc0 [port:5000]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom2
State: active
Flags: transition
OS:
Util: 0.1%
Uptime: 5h 29m
Vcpu: 4
vid pid util strand
0 8 0.6% 100%
1 9 0.1% 100%
2 10 0.0% 100%
3 11 0.2% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x108000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x3]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0x4]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0x5]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0xd]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0xf]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:f8:c9:7c
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x7]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0x8]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0x9]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0xa]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0xe]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0x10]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:f9:88:a0
service: primary-vsw1 @ primary
[LDC: 0x6]
Vdisk: vdisk2 vol2@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xb]
Vcons: [via LDC:12]
ldom2@primary-vcc0 [port:5001]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom3
State: active
Flags:
OS:
Util: 24%
Uptime: 3h 42m
Vcpu: 4
vid pid util strand
0 12 100% 100%
1 13 1.4% 100%
2 14 1.4% 100%
3 15 1.4% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x188000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x3]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0x4]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0x5]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x6]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0xf]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:fb:d9:6d
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x8]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0x9]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0xa]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0xb]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0xc]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0x10]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:fa:aa:57
service: primary-vsw1 @ primary
[LDC: 0x7]
Vdisk: vdisk3 vol3@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xd]
Vcons: [via LDC:14]
ldom3@primary-vcc0 [port:5002]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom4
State: active
Flags:
OS:
Util: 0.2%
Uptime: 1d 4h 4m
Vcpu: 4
vid pid util strand
0 16 0.4% 100%
1 17 0.3% 100%
2 18 0.1% 100%
3 19 0.0% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x208000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x3]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0x4]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0x5]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x6]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x7]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d]
mac-addr=0:14:4f:fb:df:2c
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x9]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0xa]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0xb]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0xc]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0xd]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0xe]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57]
mac-addr=0:14:4f:f9:33:59
service: primary-vsw1 @ primary
[LDC: 0x8]
Vdisk: vdisk4 vol4@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xf]
Vcons: [via LDC:16]
ldom4@primary-vcc0 [port:5003]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom5
State: active
Flags: transition
OS:
Util: 0.2%
Uptime: 1d 4h 4m
Vcpu: 4
vid pid util strand
0 20 0.6% 100%
1 21 0.0% 100%
2 22 0.3% 100%
3 23 0.0% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x288000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0xd]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0xf]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x3]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x5]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0x9]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:f9:ae:a1
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x7]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0xe]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0x10]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0x4]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0x8]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0xa]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:f9:b2:b0
service: primary-vsw1 @ primary
[LDC: 0x6]
Vdisk: vdisk5 vol5@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xb]
Vcons: [via LDC:12]
ldom5@primary-vcc0 [port:5004]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom6
State: active
Flags: transition
OS:
Util: 0.3%
Uptime: 1d 4h 4m
Vcpu: 4
vid pid util strand
0 24 0.5% 100%
1 25 0.3% 100%
2 26 0.5% 100%
3 27 0.0% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x308000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x6]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0xf]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x3]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x5]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0xa]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:f8:27:b8
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x8]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0xc]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0x10]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0x4]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0x9]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0xb]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:fb:f5:c3
service: primary-vsw1 @ primary
[LDC: 0x7]
Vdisk: vdisk6 vol6@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xd]
Vcons: [via LDC:14]
ldom6@primary-vcc0 [port:5005]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom7
State: active
Flags: transition
OS:
Util: 0.4%
Uptime: 10h 23m
Vcpu: 4
vid pid util strand
0 28 0.6% 100%
1 29 0.1% 100%
2 30 0.3% 100%
3 31 0.2% 100%
Memory: 1900M
real-addr phys-addr size
0x8000000 0x388000000 1900M
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x6]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0x7]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0x3]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x5]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0xb]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:f9:1f:5d
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x9]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0xd]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0xe]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0x4]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0xa]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0xc]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:f8:3a:3e
service: primary-vsw1 @ primary
[LDC: 0x8]
Vdisk: vdisk7 vol7@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xf]
Vcons: [via LDC:16]
ldom7@primary-vcc0 [port:5006]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
bash-3.00# -
Play audio action doesn't work in Captivate 7
Hi,
On the first slide of my course I added a "quick start" guide. It consists of a series of captions containing text. In each caption there's a "Continue" text link triggering an advanced action to hide the current caption and show the next one. This works perfectly.
Now I wanted to attach audio to each step of the guide. I added a "play audio" action after the show/hide actions for the first step. No audio was playing. When I changed the play audio to be the first action in the script - the script didn't work at all. When I changed it to be between the hide and show, the hide worked and show didn't. What I understand from this is that play audio doesn't work and also halts the whole thing.
Any advice?
ThanksJust checked it out, created a shared action with almost exactly the same commands, but grouped all the text containers in one group Gr_TC
to hide:
It worked perfectly. You don't see a label, because it is a shared action, for which I just filled in some parameters. Attached it to three buttons, had 3 text containers and 3 different audio clips.
Is the audio clip playing when you use it in another way? The only difference seems to be that you have a VO clip and I used one of the included sounds with Captivate.
Another way could be to attach the audio to the text container as object audio. Once you show the text, audio will play, when you hide the text it will stop. That was the way to go before CP6:
http://blog.lilybiri.com/playtime-with-audio-and-widgets
Lilybiri -
Bug? chained jQuery Selector in Dynamic Action doesn't work
Just found out, that this jQuery Selector jQuery("#ABOTYPE_REPORT").find("#f01_0001") doesn't work as triggering Element of type "jQuery Selector" in a Dynamic Action.
But this one jQuery("#ABOTYPE_REPORT").find("#f01_0001")[0] worked with type "DOM Element" as triggering Element in a Dynamic Action.
To my knowledge even the first one is a real and valid jQuery Selector and should work.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.atHi Patrick,
It would be really nice if you could support a less strict definition of the jQuery Selector (as i understand DOM Object and jQuery Selector to be the advanced and more powerful options).
In my example i could directly use #f01_0001 if my page wouldn't have more than one TabForm on it (and therefore multiple elements with id f01_0001) ;-)
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at -
Collapse action doesn't work when several hierarchical columns in a report
Hello everyone!
I have an analysis which contains 6 hierarchical columns. And the problem is that for the 5th and 6th columns collapse doesn't work. I can easily expand the column, but I can't collapse it back. The first four columns are collapsing fine. Is there a bug which describes this?
I'm using OBIEE 11.1.1.6.7. Tried to check this issue in Mozilla and IE - collapse didn't work in neither of them.It doesn't work here either. After checking the italicized bit below, I see that it doesn't work when called by an application either. It looks like a bug.
Here's the fix I found here. Put it in the automator action "run Applescript"
http://bbs.applescript.net/viewtopic.php?id=15292
on run {input, parameters}
--Pop Box
display dialog "Automator hosed me with a bug, so I'm making you wait for 5 secs with delicious Applescript." giving up after 5
return input
end run
The non-working solution :P
One suggestion - split the workflow into two (or more) parts.
1. Open Finder Items with Default Application
2. Ask for Confirmation
3. Run Workflow
4. Wait for User Action
5. Open Finder Items with Specific Application
Save the first as an app, the second as a workflow.
BG3, G4QS, G4ALPB Mac OS X (10.4.3) -
Buttons with multiple actions doesn't work in v32.1
We had buttons in our previously published folios that bring one multi-state object to first state and second MSO to other state which depends on which button is pressed. It works in app v32.0 and lower, but it doesn't work longer after trying to update our app to v32.1.
If there is no more possible to have buttons with more than one action, I think we should be warned in What's New in Relaese v32.1 notes. Because it's not happen we consider it as a bug. Can someone please tell us whether this is a permanent change to button functionality in DPS folios or if it is happen by mistake?Hello Michelle,
I was wondering if you were able to see my post today about problems with MSO's and whether you were able to get any solutions for the previous posts on this thread?
I have been in contact with the Adobe support team with regards to the problems I am having with the App I've created and sent the App and some sample indesign files for them to look over. They have been really unhelpful and just given me this as the response:
I have also researched about this issue and would like to inform you that there are several changes which have been incorporated in iOS 8.
So apps which are created and working with iOS 7 might not work with iOS 8. This is an expected behavior.
You would have to create the app again with compatibility settings with iOS 8 and then release an update for the same.
So altogether there has to be another to be app created for iOS 8.
As we are already 2 weeks over deadline, due to problems with iOS 8, and out of budget to cover the extra work we have had to do so far problem solving these issues, I really hoped for something better than this response.
Are Adobe really not looking into a fix for this? Is the only solution to limit the interactivity and functionality of DPS apps so they work within the new restrictions of iOS 8?
Any help would be really gratefully received.
many thanks,
Chrissy -
• Photoshop "action" doesn't work well for big file?
Hello -
I made a Photoshop® script (action) which works perfectly…
(Open .PDF files in Photoshop®, to after save them as .JPG files into another folder)
The problem comes when I launch a batch process.
It takes a while to the computer to open the large .PDF files, and when a file is opened,
well it doesn't go through the whole script. In fact, Photoshop® already open the second file and so on.
Then without running the rest of the script/action
NB. I work with the CS5 version of Photoshop® (on Mac).
Thank you for any input.
Have a nice day…
- DimitriHello Curt -
I work on a MacPRO 8core (4 years old) with 16GB of RAM.
I have a 300GB HD as "scratch disk" (almost empty)…
- Dimitri -
The past two versions of FF have rendered the address bar useless when entering a web address...still works with links.
Checked Java website...no updates availableI'm using Firefox 22 on Windows 7 64-bit, by the way.
You can very easily replicate this "bug" (or "feature"... ahem) by shift-clicking any hyperlink which opens up a new Firefox window. Immediately hit the "stop" button to stop the page from loading.
If you're fast enough, the address bar will be completely empty and you can't "refresh" or try again or anything.
In my opinion, the URL should be placed into the address bar the very moment that new window opens. I'd appreciate an explanation of why this is not already the case and if it will or will not be the case in the future. -
E-mail Alert Notification Action doesn't work
Don't receive Alert notifications on email.
Attributes-> Actions-> Critical Action send to email.
At occurrence Critical Alert of the notification are not sent on email.
If a host or the agent are not accessible, the notification is sent on my email.
How to solve this problem or where see Actions log.
I use the built in module of sending notificationns email.sh.
Whether it's necessary to adjust on each server "Sendmail" for sending notifications or to adjust "Sendmail" on a server where it's installed SunMC.
Enough in that case it's better to use Halcyon PrimeAlert EventAction????
Any Idea?You're right: if you're using the default out-of-the-box email actions, then you need to make sure sendmail is set up on every system with an Agent.
Quite often production systems are running restricted Solaris installs without sendmail, or are behind a firewall that denies email.. that's when you'd really want EventAction (so you only need sendmail on your SunMC Server).
EventAction really is the way to go for any kind of SunMC notification/integration... ...but I work for Halcyon, so you have to assume I'm a biased vendor :)
Regards,
[email protected]
http://www.HalcyonInc.com -
Link to action doesn't work in a POWL application
Hi,
I have developed a web dynpro ABAP application and it is called by portal,
This WD calls standard POWL, in a POWL there is a LinkToAction field.
When I click on field the system should open a new window (shopping cart detail),
but it doesn't happen anything.
which could the problem be?
Thank you.
Best regards.
AlHi Alberto,
1. Define an Action (corresponding to your Link to action which is typically the FIELD Name of the column in POWL Table) in your POWL feeder Implementation "IF_POWL_FEEDER~GET_ACTION" .
IF_POWL_FEEDER~GET_ACTION is a standard object of custom feeder class, how can I define a new Action?
<Vineet> See the Wiki Link http://wiki.sdn.sap.com/wiki/display/WDABAP/DocumentationInformationabout+POWL
This has a document (POWL.doc) for POWL, refer page number 20. You can use parameter C_ACTION_DEFS for explicitly defining Actions.
2. Handle the defined action in another feeder implementation "IF_POWL_FEEDER~HANDLE_ACTION".
this code could be rigth?
METHOD if_powl_feeder~handle_action.
FIELD-SYMBOLS: <shopping_cart> TYPE STANDARD TABLE.
IF i_actionid = 'SELECTION'.
triggers the event
e_portal_actions-fire_wdevent = abap_true.
Pass parameters to event
ASSIGN c_result_tab TO <shopping_cart>.
i_shopping_cart = <shopping_cart>.
selected row
READ TABLE c_selected INTO ls_selected INDEX y_index.
Read selected POWL data
READ TABLE i_shopping_cart INDEX ls_selected-TABIX INTO s_shopping_cart.
CHECK sy-subrc = 0.
Pass parameters
ls_parameter-key = 'OBJECT_ID'.
ls_parameter-value = 'I_'.
APPEND ls_parameter TO e_portal_actions-parameters.
ENDIF.
ENDMETHOD.
<Vineet> Seems good provided you have defined the action name in "your class->IF_POWL_FEEDER~GET_ACTION" as 'SELECTION'.
3. Now you need to raise an portal event from the method "IF_POWL_FEEDER~HANDLE_ACTION".
where a portal event has to be raised?
<Vineet> You have alrday raised it when you used "e_portal_actions-fire_wdevent = abap_true", as above you can additionally pass parameters as you have done in pushing some data in "e_portal_actions-parameters".
4. This Portal event will be again captured in the event "POWL_FOLLOW_UP" from POWL WD component "POWL_UI_COMP"
<Vineet>Let's assume your WD component is "MY_COMP" which uses "POWL_UI_COMP". then in the component controller or View you can handle an event "POWL_FOLLOW_UP" which is a POWL Interface event. This vene has the same action "SELECTION"a nd the parameters which you have raised from "your class->IF_POWL_FEEDER~HANDLE_ACTION".
5. You can handle this event "POWL_FOLLOW_UP" in your WD which uses "POWL_UI_COMP" and throw a pop-up from your WD component.
it is not clear point 5.
<Vineet> From the event handler of "POWL_FOLLOW_UP" you can launch another webdynpro in a po-up or a new winmdow.
Please let me knwo in case you face issue.
Regards
Vineet
thanks.
Best regards. -
Action doesn't work if getFocusOwner() is null
i have JInternalFrame with toolbar with three buttons with defined actions (insert,update,delete) and jtable. actions have key bindings so i don't need buttons to ever get focused, i'd preffer jtable to have focus all the time so key presses (up/down/left/right) go to jtable. problem is that if i set buttons setFocusable(false), it seems all right but after some action jtable losses focus and getFocusOwner() returns null and in that case key bindings don't work, i have to click on button to invoke action.
what can i do to keep jtable focused all the time and still be able to operate actions with keyboard?You could detect when one of the buttons gets focus and transfer it back to the JTable.
-
Stop button doesn't work properly
Hello,
I only have a GPRS connection for my laptop so my internet is very slow.
I can only load one page at a time but many sites keep on loading the page that is opened after I clicked another link or bookmark.
Even the stop button or closing the tab doesn't stop it from loading. It keeps on loading and it takes sometimes more than a minute to stop.
During that time I'm not able to load any other pages which makes surfing very time consuming.
It happens on many sites with Flash I believe. Sites with older "programming" or "less fancy sites" do stop to load when I press stop.
So how can I really stop all the sites on the web from loading?
Thanks in advance.Duplicate thread
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
My actions doesn't work. Help!
I created an action to "expand by 1 pixel". I can select it and hit play in the actions window and it works just fine. The button combo I assigned to it is shift- F1, which does NOT work.
I have a Mac and I have a suspicion that there is some keyboard command option in system settings I need to mess with, but I'm not sure. The same combo works just fine on my work Mac.
Any ideas?I run CS6 PC version neither the 64bit and 32 bit PC CS6 allows an an action to have F1 key with or without a modifier key to be use as a shortcut for an action.
Maybe you are looking for
-
How to change the default sql servery query name?
Whenever we click on new query button, Sql server automatically opens a new query with default name SQLQuery1.sql. Can I change this default name? What I mean to say is I have to work with quite a number of databases on different servers. So I open m
-
Creative cloud launches but does not load - using windows 7 PC
I have uninstalled and reinstalled several times but when Creative cloud launches, the wheel turns and stops and it remains blank. Can anyone help please. Since asking this I opened Acrobat and it asked me to sign in which I did and now Creative Clou
-
KM links should be showed in web dynpro iview
I want to creat a icon in my webdynpro iview...when i click that link it opens another page with list of links to my KM documents.....i want to make it very attractive look too....what options should i use, when i click the web dynpro icon the km pag
-
E52: Mail for Exchange complains about low memory
Hello, we've just gotten two Nokia E52 phones for our company to use as mobile MS Exchange clients. We've been using the E51 for the past two years without any major problems. After just one day of use however, we've already run into memory problems
-
Within music Library can anyone please explain why after I select the option to sort 'Album by Artist' a number of tracks are being treated as separate albums? How can I fix this? I have tried to manually correct by 'drag and drop' individual track