Stop labview applicatio​n from MS VC got internal error: image.cpp line 11450
Hi:
I need to control a labview application (It's been compiled as exe file)from my MS VC program. I tried using PostMessage(hWnd, WM_CLOSE) from whithin my program as MSDN suggested method to stop an application
cleanly. However, when i put my program in debugging mode and run it step by step, the LV program generate an internal error "image.cpp linexxxx" after it reached that PostMessage() call. in run mode , the Labview app simply ignore the WM_CLOSE message sent from my program.
So is there any other ways to stop labview application from VC program?
Thank you!
ls
> So is there any other ways to stop labview application from VC
> program?
You can use ActiveX. Turn the server on for your built app, open a
connection from VC, and use the app or VI properties to get LV to exit.
Greg McKaskle
Similar Messages
-
Got internal error Exception caught in pfrrun() while running PLSQL in apex
Hi,
The apex 3.1 is running on the windows 2003 box with 10.2.0.3 database.For almost 3 weeks,there are error messages on the alert log that
ORA-00603: ORACLE server session terminated by fatal error
ORA-03135: connection lost contact
When the trace file is observed,the following messages is displayed
*** 2008-07-29 07:25:42.715
*** ACTION NAME:(PAGE 26) 2008-07-29 07:25:42.684
*** MODULE NAME:(APEX:XXX) 2008-07-29 07:25:42.684
*** SERVICE NAME:(test) 2008-07-29 07:25:42.684
*** CLIENT ID:() 2008-07-29 07:25:42.684
*** SESSION ID:() 2008-07-29 07:25:42.684
*********START PLSQL RUNTIME DUMP************
***Got internal error Exception caught in pfrrun() while running PLSQL***
***Got ORA-3113 while running PLSQL***
PACKAGE BODY FLOWS_030100.WWV_RENDER_REPORT3:
Did somebody encountered this error?What is the problem here?please advice on this.This was upgraded to 3.1 from a month back and there
are no messages on the development box where the
envirnoment is the sameI'm not sure (at the moment I have not instance with APEX here) but FLOWS_030000 should be APEX 3.0 package...
So to say it's a corpse of previous APEX installation...
But there is an Oracle Application Express (APEX) where you can ask further questions about APEX structure.
Message was edited by:
Faust
Edit:
alert log internal error exeception caught in pfrrun() while running pl/sql -
Invoke Labview applicatio​n from Command line
hi,
I have a labview program which does some analysis on my Test data.
My application is that,i have a Test sequencer program(Different application) which collects data and stores it in .dat file.
After this i invoke exe of Labview Analysis program from Test sequencer & i enter the Test data filename as a command line argument.
My first step in analysis program is read command line argument(thru App.Args property) & get filename(the command line gives array output , index 0 will be Labview,index 1 will show filename)
This works absolutely fine.
I made a copy of this analysis prog to include some more functionalities and renamed it as different Labview program(prog structure is same) & trying to do the same abovesaid process.
But somehow im not able to get Command line arg(basically here filename) passed to labview.
The error im getting is that it's showing the path of my application (say if my application is in C)."C:\xxxx.dat is not a LABVIEW data file".
My question is:
Is there any settings changes to be done for Command line args property node when we make a copy from one prog to other prog.? Im not having clue why this should occur?
-MuraliJust to confirm I understand what you are asking... you copied the App.Args property from one vi to another, compiled the new vi to an exe, new exe doesn't receive the command line parameters.
Did you make sure the "Pass all command line arguments to application" check box (in the 'Advanced' category of the application builder) was checked for the new application?
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle -
How do I stop Photoshop Elements 12 from adding a caption to my image?
How do I stop Photoshop Elements 12 Editor from adding a caption to my image? It is automatically adding the name of my camera (as a caption) to the file any time I make a change in the Editor. Then I have to manually delete them.
That's not Elements which writes the Camera model in the exif, that's your camera. It's a common complaint with Olympus.
Solution (edited)
Use the 'Find' menu to select the files starting with the offending caption (Olympus, for instance). Highlight all selected files and right click; select the option to add a caption; leave the caption blank and click enter; you'll be prompted if you want to delete the captions : you do.
See also:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Camera_name_appears -
Labview 6.0.2 patch does not remove my "image.cpp" error
I have an industrial PC with the following characteristics:
* Sharp LQ10D367 10.4" TFT screen, running a VGA driver (16 colours only option)
* ROBO 608, Industrial SBC motherboard with onboard video driver, from Chips and Technologies, 69000; 2MB onboard video memory
The standard VGA driver is the most recent driver, and in fact the only one available for this hardware.
Labview 5.1 runs without problem on this machine, but when I loaded Labview 6 (with the 6.0.2 patch) it came up with an "image.cpp error, line 4150" every time I tried adding a graph to the front panel. Changing the screen acceleration properties did not make any difference.
Though I have gone back to version 5.1
for the time being, my application would benefit substantially from the current version.
Are there any fixes for this, or is Labview 6 simply not compatible with VGA screen drivers?
Thanks,
JoI have LV6.0.2 running on an Arcom SBC with the Chips and Technology 69000
HiQVideo 2MB display chip. This chip is not capable of rendering 3D graphics.
I have noticed the CPU will go to 100% usage if I open a sub-VI panel with lots
of the new 3D graphics on it, as the display chip passes rendering off to the
main processor.
Perhaps you could try replacing the LV6 3D graphics with the older versions
that are available on the Controls pallet. At 16 colors the new graphics look
terrible anyway.
I am running the chip at 1024 X 768 screen resolution and 65K colors with
no other problems.
Regards,
Alan Brause
"Jo" wrote in message news:[email protected]..
> I have an industrial PC with the following characteristics:
>
> * Sharp LQ10D367 10.4" TFT screen, running a VGA driver (16 colours
> only option)
>
> * ROBO 608, Industrial SBC motherboard with onboard video driver,
> from Chips and Technologies, 69000; 2MB onboard video memory
>
> The standard VGA driver is the most recent driver, and in fact the
> only one available for this hardware.
>
> Labview 5.1 runs without problem on this machine, but when I loaded
> Labview 6 (with the 6.0.2 patch) it came up with an "image.cpp error,
> line 4150" every time I tried adding a graph to the front panel.
> Changing the screen acceleration properties did not make any
> difference.
>
> Though I have gone back to version 5.1 for the time being, my
> application would benefit substantially from the current version.
>
> Are there any fixes for this, or is Labview 6 simply not compatible
> with VGA screen drivers?
>
> Thanks,
> Jo -
Things disappear from my indesign files!!!!
Images, boxes, lines logos, other design elemtents will be missing from a page when I open indesign. I restore the same file from time machine yesterday! and all the elements are on the page (it is fine).
The only thing I have done to the file the morning is to copy and paste a line of text from excel on to a different page of the file.
Please help!Hi P
I have found another indesign file with the same problem!!!!
Its a text box this time!
Luckily its just a spread with a couple of words saying what needs to go on the spread when I come to design it.
See below how it should look
and how it looks now - with the 2 text boxes disappeared
and here's the layers panel - a node appears in the centre of the spread when I click the item in the layers panel -
I got internal error 2738 after trying to install the marvell yucon ethernet adapter driver
I got the marvell yucon ethernet adapter driver on the acer support page. My laptop is an extensa 5420-5038 with vista sp2 32 bit. My wired lan is not working but the wireless is. The version of the acer driver is 10.12.8.3 if that would help. I think uninstalling the old software for the adapter must have failed during installation and I don't know what to do. I don't know how to find any old applications or machine language software for the adapter in the computer to uninstall before trying again if that is what I have to do. Do I have to go to the command prompt and do something?
http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/internal-error-2738-when-trying-to-update-marvell/ce07aa54-f6d2-4834-89c5-71b61877eb4e
-
I turned my MacBook Pro and got an error message with lines and lines of code and then it turns off
I turned on my MacBook Pro and got an error message with several lines of code and then it turns off
Were you able to see any of the error codes? Have you tried resetting NVRAM (booting while hold cmd+option+p+r until the second chime)?
-
Need some help, does anyone know what error code 214 means? First action in the creative cloud and this is what I got.
Hi moosies mom,
Please try downloading the update manually from : Adobe - InDesign : For Windows and check.
You might also want to refer to the KB : http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
Regards,
Rave -
Got error- "plotsup2.cpp Line 306. failure page says nothing found
any help on the above error code
OK, now I'm even more confused. What does LV 6.1 have to do with the NI SCXI VIs? What NI SCXI VIs? You should be installing NI-DAQ (DAQmx). If you installed LV 8.6, then you need to install the support for LabVIEW when installing the DAQmx software. This installs the necessary drivers and VIs for the target LabVIEW version.
EDIT: Got sidetracked while composing response, so didn't see Dennis' response.
Message Edited by smercurio_fc on 01-16-2010 11:20 AM -
Hi
I am trying to create a delivery note form a sales order in B1 V9 PL8 and I am getting the following error -
Internal error (-2010) occurred
The code has been working but we seem to be getting problems now
Can anyone suggest anything please ?
Copy of the code attached
Thanks
AndyHi Andrew,
Try replacing this line:
odel.Lines.BaseLine = lineno - 1
with this:
odel.Lines.BaseLine = oorder.Lines.LineNum
Beni. -
I just installed facetime and got internal error, why?
I cant even open it
Wait some time. Apple servers are flooded with activation requests and they can't all be processed at the same time. Give it a few hours and try again.
-
Hello,
I was developing a project in Labview 7.1 and had saved it on vista when the vista OS decided to enter suspend, Labview 7.1 stopped responding as a result and I had to reboot. I will never trust vista again but when I try to open the VI I get the following error:
Fatal Internal Error : “objheap.cpp”, line 579.
And the following text file report is created. What I am wondering is there any way to restoring or uncorrupting this VI which is attached. Sub VI’s are not included but if you can get the VI to open even without them then the problem is sorted.
#Date: 25 Feb 2009 12:13:28
#OSName: Windows NT
#OSVers: 5.1
#AppName: LabVIEW
#Version: 7.1
#AppKind: FDS
D:\lvmerc\src\source\objheap\objheap.cpp(579) : DAbort: Heap has insane block size
$Id: //labview/branches/Mercury/dev/source/objheap/objheap.cpp#3 $
0x009DFC85 - LabVIEW <unknown> + 0
0x007080AC - LabVIEW <unknown> + 0
0x007079E1 - LabVIEW <unknown> + 0
0x00A66716 - LabVIEW <unknown> + 0
0x00706B02 - LabVIEW <unknown> + 0
0x006073AE - LabVIEW <unknown> + 0
0x0070532B - LabVIEW <unknown> + 0
0x00A653E5 - LabVIEW <unknown> + 0
0x00A66911 - LabVIEW <unknown> + 0
0x009ED231 - LabVIEW <unknown> + 0
0x005ADED7 - LabVIEW <unknown> + 0
0x004B7F79 - LabVIEW <unknown> + 0
0x004B7EA7 - LabVIEW <unknown> + 0
0x004B7CF9 - LabVIEW <unknown> + 0
0x004B8492 - LabVIEW <unknown> + 0
It also managed to corruptly my library file for the project which I cannot open also and is attached,
Thank you
Message Edited by Support on 03-02-2009 08:50 AM
Attachments:
looptest.vi 1743 KB
AbbottHMITree.llb 4063 KBHello Paul,
I have been looking into your error code as well as the attached files of your VI and LLB. Pasting in your error code is proving very helpful in trying to help you. I initially tried to open your files in my system, where I would possibly be able to resave them for you, however it looks like I will have to try a different approach.
As I understand it, you have been using LabVIEW 7.1 Full Development System with Windows Vista. LabVIEW 7.1 was released during the years when only Windows 2000 and XP were available. With the release of Windows Vista in later years, National Instruments produced LabVIEW 8.2.1 with support for Windows Vista Business or greater.
Please reply with the following information:
Are you using Vista 32-bit or 64-bit?
Are you still able to open the LabVIEW Development Environment to produce new VIs?
Have you tried to open other VIs (after backing them up) with LabVIEW 7.1?
Regards,
George T.
Applications Engineering Specialist
National Instruments UK and Ireland -
LabVIEW Real-Time and Remote Front Panel MemoryManager.cpp line 437 error
Hi all,
I'm using a smartcamera (NI 1742) with LabVIEW Real-Time 8.6.
When I look at the Front Panel with the web browser and I close the browser or I Stop the executable, I always get this error: MemoryManager.cpp line 437. I've checked if someone else had this error, but I guess I'm the only person who got this error. I saw someone who had the MemoryManager.cpp line 406, but mine isn't on this line.
The application works well, but when I got the error, I need to reboot the smartcam to get it works. In my application, I use the Modbus library and I read/write binary file in the hard disk of the smartcam....
Anyone knows the solution?
Thank you very much
StephanieHi again,
Still didn't find the problem on my side. Here's a picture of my code. If I put the code surrended in red at place (1), I don't get the error, but if I put the code at place (2), I get the error. Why oh why....?
I get the error when I close the browser or click Back button of the browser or Stop the application with the red dot or stop the application with the Quit button on my front panel.
This morning I found a post on this forum about getting an error using Property node and Remote panel (http://forums.ni.com/ni/board/message?board.id=170&message.id=252705). I did what they suggest: wire the property output to an indicator and it works (disable "Enable automatic error handling dialod" didn't work... I don't know why)... until I put extra code in my VI.
I really need help please!
Thank you
Stephanie
Attachments:
MemoryManager line 437 error.JPG 228 KB -
Internal Error 2842 when trying to install from CD
I am running Windows 7 and had it corrupted recently. I reinstalled Win7 and had to reinstall all of my stuff. Everything works fine. When I went to reinstall my Palm Tungsten E2 from disc, I get 'Internal Error 2842' and can't continue.
Any ideas???
Post relates to: Tungsten E2i found out how to fix it.....the error happens on windows vista 32 and 64 bit computers.... you can fix by going to your "command prompt" (found in accessories or just type in the search bar) and DONT CLICK. you have to first right click and pretty "Run as Administrator" and then a window will come up with stuff on top but the last few words should say "C:\Windows\System32>" and then type right after
"regsvr32 jscript.dll" and yes there is a space between
regsvr32 and jscript and hten simply press enter on your keyboard and run the install again
Maybe you are looking for
-
I am trying to load from DSO to an Info cube. The records doesnt have error and but the process always gets terminated and gives the follwoing message: Error while updating to target ZPU_C01 (type INFOCUBE) Processing Terminated Its not able to creat
-
Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receate
-
Problems with xfi and new logitech z5300 speak
Hello, I just upgraded my speakers to Logitech z5300e's from my old set of Creative 5.'s. I am using an XFI soundcard that I have had no problems with in the past; it worked flawlessly with my old Creative 70 watt 5. speakers. The new speakers do not
-
I can't see pdf files. Have Adobe reader loaded
sometimes I can and then I can't. as far as I know I am doing nothing differently. Very frustrating. Am new to mac and on a very steep learning curve. Help witl be appreciated.
-
How Can I Extract a Substring in WHERE Clause of CFQUERY ?
Is it possible to extract a substring in the WHERE clause of either <CFQUERY> or in a Query of Queries? I am trying to use the following query to find all email addresses with the domain "comcast.net" (i.e. everything after the "@" in the email addr