Stoping loaded files before they start

I have a preloader that starts to play clips for about a
second before they are stopped - they are seen and heard for that
brief period of time during the preloading, which does not look
very good. The preloader is based on the MediaLoader class by
Macromedia from a few years ago - it is instantiated, passed an
on-stage holder clip, and passes back an array with references to
the clips in the on-stage holder clip once completed. There is code
to stop the clips inside the loader object once onLoadComplete is
called.
Does it sound like a design issue, or is this typical of
preloaders, or what?
Thank you.

Hi,
I have had a similar problem where users are uploading 40! attachments into an ADF app. Because it is a one at a time approach I was in disbelief that they had sat there and done that in the first place! I was considering limiting them to selecting *.zip files enforcing them to zip before upload. This would reduce space requirements, upload time and also number of up/downloads of the files.
Brenden

Similar Messages

I have been receiving charges from apple itunes and nothing has been purchased. Trying to talk to someone live is a nightmare. How do I get ahold of someone to help me with these charges before they start to really negatively effect my bank account?

I have been receiving charges from apple itunes and nothing has been purchased. When I look at the charges on my online banking a phone number is provided, but when I call that number it tells me to go to the web site. Trying to talk to someone live is a nightmare. How do I get ahold of someone to help me with these charges before they start to really negatively effect my bank account?

You've checked the purchase history on your account to see what app(s) they are from ? If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases. And you haven't got any auto-renewing subscriptions : http://support.apple.com/kb/HT4098 ?
If you haven't made them, and nobody else has access to your account or devices and may have made them, then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My cq56 wont start it keeps saying windows is loading files but wont start

my compaq presario CQ56 wont sart. it just keeps telling me "windows is loading files" but just wont start

Is the message that the printer is offline?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
If not then check the USB cable between the computer and printer and reseat it if necessary.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Recently my movies and videos take forever to load and when they start playing it's for a second or two at a time. Have to hit the play icon over and over, did not use to be this way they work great on my desktop and iPod

Recently I have been experiencing my downloaded videos and online vids taking a long time to load and when they do, they will only play for a few seconds at best and you have to hit the play icon over and over. Never had this problem before with the 20 plus vids I have any suggestions would be appreciated

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

HT4640 I have been developing a keynote presentation & want to play audio across several slides. Also want to insert movies made in final cut X but am finding I have to go to black and double click movie files before they appear. looks awful to do that.

I am new to Keynote and the newest version was just installed in my apps. I have found difficulty in using audio in a presentation since my presentation plays various audio clips over several slides or movie clips. My solution has been to create movies with my audio (.mov from final cut x) and insert into the presentation. They play in the presentation but I cannot get a smooth transition. The presntation must go to black and I have to double click for every "slide" that is done this way. I am on the verge of going back to powerpoint as my presentation platform. Seems there is little or no flixibility in keynote.

I am new to Keynote and the newest version was just installed in my apps. I have found difficulty in using audio in a presentation since my presentation plays various audio clips over several slides or movie clips. My solution has been to create movies with my audio (.mov from final cut x) and insert into the presentation. They play in the presentation but I cannot get a smooth transition. The presntation must go to black and I have to double click for every "slide" that is done this way. I am on the verge of going back to powerpoint as my presentation platform. Seems there is little or no flixibility in keynote.

Certain Apps Quit before they start.... I'm stumped

Recently I have discovered that when I try to open certain apps: Starcraft, Cabos(open source Limewire clone), Diablo II, and most other third party apps, said apps bounce a few times in the dock and then just quit (before even opening). I have no problem opening Firefox, Mail, iTunes, or really any other of my most commonly used apps, but certain ones just don't seem to want to open. I have no idea what makes certain apps immune to this problem, but it has caused me a great deal of frustration.
I would appreciate any insight into this problem, frankly I'm stumped.

In addition to Barry's good advice:
Create a new account, name it "test" and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
Let us know and we'll troubleshoot this further.
-mj
[email protected]

Ipod crashes with some audiobooks - before they start

I have downloaded some free audiobooks from the itunes site and when I try to play them on my ipod, the ipod crashes and I get a black screen with the apple for a while.
This is somewhat annoying for me as I bought the frakking thing to listen to books!
Can anyone help?

OP
Help!

Lag after pre-loader hits 60% and before movie starts playing.

Hi all,
I’m hoping somebody can shed some light on an issue
that I’m experiencing with a Captivate project I’m
working on. I’ll try to explain this in detail so you
understand the background and scope of this project. These are
being exported as HTML/SWF and being viewed within IE6.
I’ve been tasked with taking a new employee training
course that is currently handled by a live person standing in front
of a room of people and showing them an 18 minute VHS tape and also
covering information that is presented on a PowerPoint file, and
making it into a Captivate movie.
I was able to get the original digital video cut into 4
chunks and converted to SWF by media group that produced the tape.
The four SWF files are 320x240 and range from 13 to 22 megs.
Because of the size of the files and the amount of content, I
created 8 ‘modules’ that make up the larger project.
The last slide of the first module launches the 2nd module, etc.
until the user has seen all of the modules which on their side
(other than a brief pre-loader popping up at times) is mostly
transparent and they think they are just watching a 30 minute
training course.
Basically, what I’ve done is laid out the modules so
that the whole course alternates back and forth between text slides
with voice-overs and the movie clips. The movie clip SWF’s
have been embedded into every other module, so:
Module 1: Intro to the course (text & voice-overs)
Module 2: Video clip 1
Module 3: Discussion about stuff (text & voice-overs)
Module 4: Video clip 2
Module 5: Discussion about stuff (text & voice-overs)
Module 6: Video clip 3
Module 7: Discussion about stuff (text & voice-overs)
Module 8: Video clip 4 and wrap-up
Now here is the problem:
We have 20+ offices and I am located at the main office where
the web servers are located. If I run through this, everything
works great. I tested this in one of our off-site locations today
where they have a semi-fast connection, but still going across a
WAN.
Module 1 loads fine. Hits 60%, plays, user can click Next,
Next, Next to proceed through the training. At the end of Module 1,
we prompt them with some text to let them know there may be a brief
delay before they see the upcoming video clip. Click Next, loads
Module2.swf which has the videoclip1.swf embedded in it (21 megs).
Takes a little while to load which is expected. Hits 60%.
Preloader goes away and then just white screen for at least 10
seconds (sometimes 20-30 seconds, depending on the size of the
embedded movie clip) before the movie actually starts playing.
This is not acceptable as the user will think that something is
broken. If the movie is not completely loaded, then it
shouldn’t have hit 60% and the preloader graphic disappear,
right?
I think that the problem revolves around the movie clip not
being able to play until it is fully loaded, although the Module
has loaded the 60% that it needs to begin playing. The only way
around this that I see is re-arrange my slides so that the video
clip is not the first slide to play in any given module.
We tried this on at least 7 computers, all of which were just
rolled out new last fall, so the machines are definitely beefy
enough to handle this.
Any ideas?
Thanks,
Mike

quote:
Originally posted by:
CatBandit
I just read your title, Mike (I don't have time for the whole
article - sorry), but felt it might help to point out that 60% is
40% less than 100%.
Nope, I am not being a wise guy, but I know it's possible to
have so much "weight" in the content of the last 40% that
additional delay might be required while a (early) required element
or object completes down-streaming. Just a thought...
Hi Larry,
Good to see you back on the forums and thanks for the reply.
What you posted further proves my point. From what I've been taught
about Captivate, it loads to 60% and begins to play while the
remaining 40% loads. Not loads to 60% and then some portion of the
remaining 40% may or may not have to load before it starts. If
that's the case, why not just load 100% before it starts and then
have no problems?
It shouldn't matter how large the file is, right? The only
difference is that larger files would take longer to reach the 60%
mark. 60% is 60% is 60%. Compare a feather to a car. 60% of the
weight of each item is still 60%, it doesn't matter how much it
weighs.
60% of a cubic foot of rock is the same percentage
as 60% of a cubic foot of marshmallows.
Anyway, I think the solution here is to fudge the problem by
putting a few 'less weighty' slides in front of the slide with the
embedded video so that the user has something to look at other than
a blank screen. I was just hoping somebody else might have
experience this and had a magic button I could press to make it all
better.
I could handle this if the preloader continued running so the
user had some clue that it was still working, but when the
preloader hits 60% and disappears and then nothing happens for
another 10-20 seconds, that's a problem.

Quicken - unable to load file - what to do?

I recently upgraded my operating system from 10.6.8 to Mountain Lion (10.8.2) on my 2009 MacBook. I then upgraded my quicken to 2007 for lion, loaded up my quicken file and it worked fine. Then I turned off my computer.
Well, when I came back to it, the file wouldn't open with the error message "unable to load file." I started freaking out as I have many yrs and the entire tax year on quicken. I found the link below, but show contents did not appear at step 5 so I was to call quicken.
http://quicken.intuit.com/support/help/backup--restore--file-issues/message-when -opening-quicken-for-mac--unable-to-open-file/GEN83256.html
I paid for and called intuit support, and after about an hour, the person said that my file must be corrupt (though it was just working this morning and on previous version). He kept having me do the above link with many different data files.
Anyway, after he hung up, I did get a version from a month ago to load up and re-entered data to catch up, closing quicken and backing up onto my external drive, etc. over and over again. I thought I was good to go but...
I turned off my computer to see if it would okay and after rebooting, again came the "unable to load file" error message. What can I do? I really need my quicken to work? Should I call India again and go through the same scripts with quicken? Please help!

I use Quicken 2007 and in my documents folder there is a Quicken Backup Folder that appears to update every time I quit Quicken. In the Files menu there are backup, restore, and save a copy commands. Maybe if you save a copy manually, it will not be corrupt. If that is the case, then try reloading the Quicken program. It is possible you got a corrupt download.
If you monitor the "More Like This" box, other threads appear. Opening them usually displays other threads. It appears you may be doing that since you found the link you posted.

Flash video on web page takes long very time to load before it starts playback

I just created a basic flash file to play a video on my web page and it's taking several minutes to load before it starts playback.
I'm using progressive downlaod and the file is in *.mov format and is 84MB in size. At first that seemed large to me for web play back, but I thought it could handle it since I thought the way progressive download works is that it would start playing the first frame right away and progressively play other frames as they download. However, this seems to be downloading the whole file first (or a major part of it) before starting any playback at all.
Is there some kind of setting I'm missing or is my understanding of the download incorrect and the file size is too large?
Some vitals:
- I'm using Flash Pro CS5
- To create my flash file, I used the standard import video wizard and selected the a file that is "on my computer" and "load external video with playback component" and then, I selected one of the standard skins.
- To deploy the vidoe on my webiste I have three files:
1) swf file containing the FLV component
2) the swf file related to skin
3) the actual video (84MB, mov file)
- Web page includes/embeds reference to swf file

Thanks for your response again. Looks like things have changed a bit to complicate this a little more.
adninjastrator wrote:
Are you saying that if I wait long enough it will start to play .... from the link you posted?
What you are implying here is correct. The file won't play no matter how long you wait. Looks like it's because of the "source" file settings in the Import Wizard may now be incorrrect. This is why it's not playing in the new file.
When I created my original Flash Video using a MOV file, during the import wizard, when asked "Where is your video file?" I selected the option "Already deployed to a web server...". Here I entered the url to where the video file is located on my production server.
When I created the new Flash Video using F4V file, during the import wizard, when asked "Where is your video file?" I selected the option "On your computer". Here I selected the file from my local drive.
Sorry for not pointing out the inconsistency earlier - I didn't think it mattered and plus I couldn't get the F4V file to import from the web server.
Anyway, I've changed my object tag using the acutal published html that flash generates and have uploaded all source files to same location.
http://www.upperhand.com/tv/video-intro.html
To sum up the problem(s) I need help with:
Issue #1 - When trying to import F4V file using import wizard, I cannot use "Already deployed to a web server..." as an option for the file location. I believe this is creating issue #2
Issue #2 - For some reason, the F4V file will not load into the SWF file when it's published to my production server.
It works when viewing locally through browser as c:\inetpub\wwwroot\mywebsite\video-intro.html
It doesn't work when viewing on development server through browser as http://localhost/mywebsite/video-intro.html
It doesn't work when viewing on production server through browser as http://www.mywebsite.com/video-intro.html
Issue #3 - When the above are resolved, I'm not certain if my orignal question/issue will be resolved... browser tries to downlaod full file before any playback.

I backed up my macbook pro before they intalled a new hard drive but when I reinstalled, my book says it isn't compatible with Maverick and I can't get the last year of pictures or files back.

I backed up my macbook pro before having a new hard drive installed. They installed Maverick for me, but now My Book says its not compatible and I can't restore my files and pictures from the external hard drive. What can I do?

Simple if you have a complete backup of your old drive erase the new one and restore from your Time Machine backup. That will put your Mac back to exactly like it was before you had the hard drive changed.
In all honesty I have no idea why most all the Apple stores upgrade every Mac that comes through to Mavericks.
To do the erasing and restoring you need to either boot from the original system discs that came with your Mac or if it came with either Lion or Mt Lion use the Online Internet Recovery system. To boot to that at startup hold down the Command + Option/alt + r keys and keep them held down until you see a globe on the screen. Once thje Mac OS X Utilities screen loads use Disk Utility to Repartition the drive as one partiotion to remove all data from it. Then when that is done exot disk Utility and select Restore from Time Machine Backup. Have the TM backup drive connected before you start this process.

HT6058 I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

Mac book now takes about 10 minutes to start up and all applications "unexpectedly quit" every time before they've opened. What did I do???

Mac book takes about 10 minutes to start up and all applications "unexpectedly quit" even before they open. What did I do???

are you using sample base instruments in those projects a lot using exs or kontakt? when paths to samples get messed up for some reason it can result in along waiting times each time a project is loaded.
lately my kontakt samples get loaded without any sign of activity. if it is a large orchestral score i see a dead screen for quite a while before suddenly everything pops up and is ready to work with. i recall seeing progress bars or similar things in the past though...
repair permissions and defragging (idefrag) may help as well.
btw. i can drink as much coffee as i want late at night, even five minutes later i can sleep well. seems i am immune. but right now i am also having plenty of hardware issues to deal with so that's a good thing i guess...!

Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible because I had them as hidden but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

If the filename starts with a dot (.thisfile), then it will be hidden on the Mac.
You can use a 3rd party App, such as EasyFind to search for the file on your Mac, and then re-name (remove the dot)

HT201272 A lot of my songs, once put on the iCloud, will not download to my iPod. They are on my iTunes, already downloaded, but will not appear in my library on my iPod. Before I started using iCloud, all music in my iTunes library was on my iPod.

A lot of my songs, once put on the iCloud, will not download to my iPod. They are in my iTunes library, already downloaded, but will not appear in my library on my iPod. There is no common thread for the origin of the songs--many were ripped from CD's, others purchased in the iTunes store. Before I started using iCloud, all music in my iTunes library was on my iPod without any issues.

- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/

Stoping loaded files before they start

Similar Messages

Maybe you are looking for