Stopping a Running process in EPMA workspace.

Anyone?
I have about a dozen running process that are sitting idle. How can i stop them? this is production environment. I've restarted all the services, still there shows running. any solutions besides rebooting the server?
Most of the process are HFM Re-deploy and export.
Any solutions?
Regards,
Alex Mathew

Hi, I'm been unable to kill a running/executing thread. Here's how I created the thread:
EvoluteRun er = new evolutionary.EvoluteRun();
Thread t1 = new Thread(er);
then here's how I'm trying to kill the executing thread:
private void StopButtonActionPerformed(java.awt.event.ActionEvent evt) {
if ( (t1 != null) && (t1.isAlive()) ) {
System.out.println("going to suspend");
t1.suspend();
System.out.println("stop");
To my amazement, the stop printouts only comes up after the running thread had been finished (finished the run()) althogh the stop button had been clicked (many times as well), there seems no effect no the executing thead. Please help.
Thanks

Similar Messages

How to stop the running process chain

How to stop the running process chains or infopackges...just qm status change is enought?

BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job

How to stop a running process

If I have a class
class MyTest{
public void start(){
int count=0;
while(true)
System.out.println(count);
++ count;
class TestRun{
public static void main(String[] args)
MyTest test = new MyTest();
test.start();
My question is is there a programatic way to stop MyTest counting in TestRun ? except of course by assigning it a null value;

First of all what you have is not a process -- it's a thread. Separate processes each have their own memory, but threads share the memory with the other threads in the process.
Second, I don't see any reference that you could set to null to stop the thread. Were you thinking of setting your local reference to the thread to null? That will only set that particular reference to null, and will not affect the thread.
You could call stop() on the thread to stop it, but doing so is unsafe.
The best solution is for the thread to continually check some flag to determine if it should keep running. The loop should continue only while that flag is true.

How to stop a process chain after the current running process

Hi experts,
I try to stop a running process chain, but only at the end of the current process load.
I try to unscheduled process chain : the job of the current process is killed and the process stop
I try to execute the programm rspc_process_finsh : same result.
Actually, I aim at waiting of the current process completion and stop the chain.
Thanks and regards,
Bobby

Hi all,
Thanks for answer.
If I resume the situation :
- Click on Unschedule process chain stop the current process. We have to change the status of the process in Yellow to Red.
- Go to sm37 to kill the job change the statut in red.
So there is no way to stop the running of a process chain only after the good or bad end of the last runnning process ?
Example :
My chain is running. The process which is running is a DTP loading process. There are 50 packages to load. I decide to click on Unschedule process chain when the package 18 is running.
If I do that, the loading of package 19 will not start right ?
So is there a way to wait that the 50 packages are loaded before that the system stop the chain ?
Thanks in advance,
Bobby.

Firefox process keeps running. I cannot open a new session until I manually stop Firefox 32 process in tax manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

Firefox process keeps running. I cannot open a new session until I manually stop Firefox 32 process in tax manager. Using Win Vista Ultimate 64 Version 6.0 Service Pack 2

Firefox is already running but is not responding
* https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
Firefox Hang at Exit
* https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
Check and tell if its working.

EPMA workspace does not show Planning Application Wizard

Hi ,
I am beginner of EPMA,and faced a serious problem.I could not move forward as EPMA workspace does not show " *Navigate | Administrator| Application Wizard| Classic Administrator* .
And also when tries to open Application Library got the following error message.
; nested exception is:
HTTP transport error: javax.xml.soap.SOAPException:
javax.xml.soap.SOAPException:Bad response: 401 UnauthorizedCode:
Code: java.rmi.RemoteException
Description: An error occurred processing the result from the server.
Actor: none "
Please help me out .

I still not sure which EPM version you are referring to but are you sure the console was installed, for 11.1.2.x it should usually be under <MIDDLEWARE_HOME>\EPMSystem11R1\products\Essbase\eas\console\bin
If EPMA has definitely been configured and the web server run as the last part then maybe the user you are logging in with does not have the correct roles assigned in Shared Services.
Cheers
John
http://john-goodwin.blogspot.com/

How to stop a running job in 10g Scheduler?

The following is a duplicate post. I posted the following to the general database forum before seeing that otn has a new scheduler forum:
I am not able to find in the Admin Guide a method to stop a currently running instance of a job in the 10g scheduler.
In 9i, I run the following script calling DBMS_JOB.broken and DBMS_JOB.remove to shut down currently running jobs:
DECLARE
jobid NUMBER;
CURSOR c1
IS
SELECT job
FROM dba_jobs
WHERE priv_user = 'ME';
BEGIN
OPEN c1;
LOOP
FETCH c1
INTO jobid;
EXIT WHEN c1%NOTFOUND;
DBMS_JOB.broken (jobid, TRUE);
COMMIT;
DBMS_JOB.remove (jobid);
COMMIT;
END LOOP;
CLOSE c1;
END;
How may I create similar code to shut down currently running jobs using DBMS_SCHEDULER in 10g? According to the Admin Guide, disabling jobs with the force option will still allow the job to finish.
How can I terminate a running job in 10g?

You can stop a currently running job using the STOP_JOB api.
STOP_JOB Procedure
This procedure stops currently running jobs or all jobs in a job class. Any instance of the job will be stopped. After stopping the job, the state of a one-time job will be set to SUCCEEDED whereas the state of a repeating job will be set to SCHEDULED or COMPLETED depending on whether the next run of the job is scheduled.
Syntax
DBMS_SCHEDULER.STOP_JOB (
job_name IN VARCHAR2
force IN BOOLEAN DEFAULT FALSE);
Parameters
Table 83-44 STOP_JOB Procedure Parameters
Parameter Description
job_name
The name of the job or job class. Can be a comma-delimited list. For a job class, the SYS schema should be specified.
If the name of a job class is specified, the jobs that belong to that job class are stopped. The job class is not affected by this call.
force
If force is set to FALSE, the Scheduler tries to gracefully stop the job using an interrupt mechanism. This method gives control back to the slave process, which can update the status of the job in the job queue to stopped. If this fails, an error is returned.
If force is set to TRUE, the Scheduler will immediately terminate the job slave. Oracle recommends that STOP_JOB with force set to TRUE be used only after a STOP_JOB with force set to FALSE has failed.
Use of the force option requires the MANAGE SCHEDULER system privilege.
Setting force to TRUE is not supported for jobs of type executable.
Usage Notes
STOP_JOB without the force option requires that you be the owner of the job or have ALTER privileges on that job. You can also stop a job if you have the CREATE ANY JOB or MANAGE SCHEDULER privilege.
STOP_JOB with the force option requires that have the MANAGE SCHEDULER privilege.

How to stop the running infospoke

Hi Experts,
there is a infospoke is still running so long time, it's incorrect, i'll cancel it as kick off the dependenies, i have no idea to how to stop the running infospoke. Anybody could tell me how to do it. thanks in advance.

hi denny,
Go to SM37 , find the job , stop the process
or
To stop the job find the job with the help of the request name ( TC - SM37 ),then in the job Details find the PID .
find the process in the process Overview (SM50 / SM51 ).
Set the restart to NO and Cancel the process without core
u can also see these threads that are already posted:
stopping v3 run job LIS-BW-VB_APPLICATION_02_010
how to cancel or change the background job which is scheduled
In SM37, for the job , click on Step button. Then from the menu Goto > variant. You can see the process chain name here.
sure it helps
Thanks
Varun CN

How to stop the backup process....

How to stop the backup process....
Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY the backup process.
HOWEVER, keep in mind that a few times during the week (depends how often you synch ur iPhone) it will be good to let the backup process let run fully.
There we go. Problem solved...

i agree its what i do i backup whenever i add a new app, or take more pics etc its exactly what i do its what ive been saying on all these threads talking about backups etc, im hoping in 2.0.1 will be bug fixes about this sort of thing...

Help needed to record an experiment for a running process

Hi Team,
While trying to record an experiment through Profile Running process option, we found issues in generating an experiment file.The error stated that the directory wasn't writable but we made sure all the permissions are available for the folder. The application is a C++ implementation.
Have attached the output message:
Running: /x/opt/SolarisStudio12.4-beta_mar14-linux-x86/lib/analyzer/lib/../../../bin/collect -P 16824 -o test.1.er -d /x/web/STAGE2LP14/xxxx -p on -S on
name test. is in use; changed to test.4.er
Reading xxxx
Reading ld-linux.so.2
name test. is in use; changed to test.4.er
Reading libppfaketime.so.1
Reading librt.so.1
Reading libpthread.so.0
Reading libcrypt.so.1
Reading libz.so.1
Reading libdl.so.2
Reading libkrb5.so.3
Reading libicui18n.so.36
Reading libicuuc.so.36
Reading libicudata.so.36
Reading libicuio.so.36
Reading libexpat.so.0
Reading libqpidmessaging.so.3
Reading libqpidtypes.so.1
Reading libxerces-c.so.27
Reading libstdc++.so.6
Reading libm.so.6
Reading libc.so.6
Reading libgcc_s.so.1
Reading libk5crypto.so.3
Reading libcom_err.so.2
Reading libkrb5support.so.0
Reading libkeyutils.so.1
Reading libresolv.so.2
Reading libqpidclient.so.6
Reading libuuid.so.1
Reading libselinux.so.1
Reading libqpidcommon.so.6
Reading libsepol.so.1
Reading libboost_program_options.so.2
Reading libboost_filesystem.so.2
Reading libsasl2.so.2
Reading ISO8859-1.so
Reading libcollector.so
Attached to process 16824
t@4133656384 (l@16824) stopped in __kernel_vsyscall at 0xffffe410
0xffffe410: __kernel_vsyscall+0x0010:    popl     %ebp
Process ID: 12981
dbx: The HW counter configuration could not be loaded
Elapsed Time: 85 ms
Run "collect -h" or "er_kernel -h" with no other arguments for more information on HW counters on this system.
Execution completed, exit status is 0
dbx: Creating experiment database /x/web/STAGE2LP14/xxxxxx/test.4.er (Process ID: 13736) ...dbx: Creating experiment database /x/web/STAGE2LP14/xxxxxx/test.4.er (Process ID: 13736) ...
dbx: Experiment directory not writable
Experiment aborted
error at line 16 of file 'dbxcol3wC1XU'
detaching from process 16824
Even we tried manually using the collect command the process started successfully but while terminating the process using CTRL+ENTER we got coredump error
f7f40000-f7f50000 rwxp f7f40000 00:00 0
f7f50000-f7f6b000 r-xp 00000000 fd:00 589838                             /lib/ld-2.5.so
f7f6b000-f7f6c000 r-xp 0001a000 fd:00 589838                             /lib/ld-2.5.so
f7f6c000-f7f6d000 rwxp 0001b000 fd:00 589838                             /lib/ld-2.5.so
ffbe7000-ffbfc000 rwxp 7ffffffe9000 00:00 0                              [stack]
ffffe000-fffff000 r-xp ffffe000 00:00 0
dbx: internal error: signal SIGABRT (sent by tkill)
dbx's coredump will appear in /tmp
We arent sure how to terminate the collect process manually.
/x/opt/SolarisStudio12.4-beta_mar14-linux-x86/lib/analyzer/lib/../../../bin/collect -P 16824 -o test.1.er -d /x/web/STAGE2LP14/xxxx -p on -S on
Please help us
Thanks
Sattish.

Hi Darryl,
We tried with the below mentioned option
./collect -P 24829 -o /tmp/test.9.er But still the same error
NOTE: No J2SE[tm] was specified for checking.
    The following J2SE[tm] versions are recommended:
      J2SE[tm] 1.7.0_25 or later 1.7.0 updates (preferred)
NOTE: You can download and install the J2SE[tm] from http://www.oracle.com/technetwork/java/javase/downloads.
WARNING: Java data collection may fail: J2SE[tm] version is unsupported.
Reading atlasserv
Reading ld-linux.so.2
Reading libppfaketime.so.1
Reading librt.so.1
Reading libpthread.so.0
Reading libcrypt.so.1
Reading libz.so.1
Reading libdl.so.2
Reading libkrb5.so.3
Reading libicui18n.so.36
Reading libicuuc.so.36
Reading libicudata.so.36
Reading libicuio.so.36
Reading libexpat.so.0
Reading libqpidmessaging.so.3
Reading libqpidtypes.so.1
Reading libxerces-c.so.27
Reading libstdc++.so.6
Reading libm.so.6
Reading libc.so.6
Reading libgcc_s.so.1
Reading libk5crypto.so.3
Reading libcom_err.so.2
Reading libkrb5support.so.0
Reading libkeyutils.so.1
Reading libresolv.so.2
Reading libqpidclient.so.6
Reading libuuid.so.1
Reading libselinux.so.1
Reading libqpidcommon.so.6
Reading libsepol.so.1
Reading libboost_program_options.so.2
Reading libboost_filesystem.so.2
Reading libsasl2.so.2
Reading ISO8859-1.so
Reading libcollector.so
Attached to process 24829
t@4133668672 (l@24829) stopped in __kernel_vsyscall at 0xffffe410
0xffffe410: __kernel_vsyscall+0x0010:   popl     %ebp
dbx: The HW counter configuration could not be loaded
Run "collect -h" or "er_kernel -h" with no other arguments for more information on HW counters on this system.
dbx: Creating experiment database /tmp/test.9.er (Process ID: 7769) ...
dbx: Experiment directory not writable
Experiment aborted
error at line 15 of file 'dbxcol61PZeE'
detaching from process 24829
Could you please review
Thanks
Sattish.

How to stop a windows process?

How do I get hold of a running process/program under WindowsXP?
How do I stop this process?
# Johannes

You should use the Java Native Interface and write some C code with the Win32 API. I don't think there is another way. You should search the MSDN for code samples for killing windows processes. And if you go ahead and do what i just suggested, then i wish you good luck and be patient!

Correct way to stop and run again a FPGA reference

Hi guys !
I have some issues when I try to stop and run again an FPGA vi, I explain.
I have two DMA FIFO, one to send data to the FPGA from the CPU, and another from the CPU to the FPGA. When it receives data, the FPGA processes them and sends them back to the CPU and according to the result the CPU makes something. For instance it can be switch on LEDs or rotate a DC motor.
But to do this kind of actions, I have to use an "FPGA Personality", LEDs and I/O Pins seem to be managed by the FPGA core. So I've to close my FPGA vi reference in charge of receive data from the CPU, make my LEDs switching on and then after rerun again my FPGA VI again, If I don't do that LEDs blinking or motor rotation stay without effect... But close and start again the FPGA VI creates problems during the execution, especially for previous waiting of reading on the DMA FIFO... I've tried to catch errors on the FIFO to start again the FPGA VI with a right timing but nothing... I'm lost and I think that I'm missing something, a concept or something else.
I can't share my code because I'm working for a company but I would like to know if you have VI with this type of structure : an FPGA reference which have to be halted to allow hardware interaction with the default FPGA personality and then run again, everything with a good synchronisation...
I hope I'm clear, but if it's not the case, I can reword if necessary.
Thank you for the help !
Afghow.
Solved!
Go to Solution.

Afghow wrote:
I think the end user doesn't have to know that when he wants to make LEDs blinking he has to call a FPGA bitfile. I mean running an FPGA VI and want to make LEDs blink from the CPU VI at the same time should be transparent for the user and this without keep in mind horrors like bitfile switching for instance.
He doesn't have to load a different FPGA bitfile. Everything you need that FPGA to do should be in the bitfile. Keep in mind that we are talking about HARDWARE when we talk about FPGA. Each time you change bitfiles, the hardware has to be reconfigured. That takes time and is pointless for the situation you are talking about. Build your FPGA code to do everything you need it to and you will be fine.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Does a long running process survive a server crash

Hi, I assume the bpel dehydration means that a long running process can survive a server crash, but I'd like some expert to confirm this.
Suppose I have a long running process which is in an infinite loop to keep invoking a web service. In the middle of it, the server is either stopped or crashed. When the server comes back, will the process continue from where it was left?
Thanks.

Yes. Your understanding is correct. Give it a try. After restart, go to the BPEL console and click under the processes tab on the "Run Recovery Agent" link. -Edwin

GF 3.1.1 Admin Console Freeze -- A long-running process has been detected

I installed Glassfish 3.1.1 on both sparc and intel servers for solaris 10 & 11 platform. All my servers have the same symptom when I access the admin console. The console freezed and pop-up a message "A long-running process has been detected". There is nothing I can do at this point. I've tried accessing from different PC with different browsers (IE, Firefox 5, Chrome and Safari), but nothing is working including clearing the cache. Also, tried uninstall and install again (with and without updatetool) many times. Any idea how do I stop the popup message? Am I the only one has this problem? I'm using JDK 1.7 (GF 3.1.1 support JAVA 7). I need help!!!!!
Thanks,
- Johnny

The only fix I know of for this issue is to reboot the host.
If there is another fix someone please let me know as I have users who run into this often.
Thanks
Bonnie.Partridge

Process Administrator and Workspace admin url for 10gR3

I am running 10gR3 bpm locally.
Url to access my local workspace is http://localhost:8585/workspace/faces/jsf/workspace/workspace.xhtml
Could you let me know the URL for accessing the process administrator and workspace admin.
Thanks in advance.

Looking at your port 8585 it is the default port for Studio, in Studio there is no webconsole or workspace administrator, those applications only are available in enterprise.
If your case is enterprise then the url is /webconsole and /portaladmin
HTH

Stopping a Running process in EPMA workspace.

Similar Messages

Maybe you are looking for