Storage Location field suppressed in MIGO

Hi,
I have entered the Storage Loc. in the PO and when I do the GR, the Storage Loc. field is graded out at the item level, only "Plant" is displayed in the "where" tab. I have unchecked the "Create SLoc. automatically" box in OMB3 for Plant and Movmt Type. Also, in OMJJ the field is unchecked.
Is there any other place where I need to make the changes?
I am trying to post the GR to cost center.
Thanks in advance.
Randy.

Hi Randy,
Could you confirm the information below:
1. Check the material type of the item in the PO.
2. Check "Define Attributes of Material Types" of the material type in the specified Plant in the PO.
(SPRO: Logistics - General> Material Master> Basic Settings> Material Types> Define Attributes of Material Types.  Select the material type in Step 1 and Double click on Sub-folder "Quantity/value updating".
What is the setting for Qty Updating and value updating for your Plant / Valuation area?  If it is similar to UNBW, Qty updating should be selected and value updating should be blank.
If both Qty updating and Value updating is selected for the material type and plant you're using.  The SLoc field will be grayed out during receipting, the system will treat this item similar to Case 1.
Cheers.

Similar Messages

  • Storage location field missed in (migo) details data ,where tab

    Hi
    I am try ing for free goods
    I created new document type (copy from subcont document type..)
    and create new number range for this doc type and assign to this this document type and assign item category L to this new document type
    i defined account assignmet cat with invoce checkbox tick removed
    and assing this account assignment cat to item cat L..
    i have done allabove settins in spro
    now i am going to ME21N
    WHEN I am crating subcon P.O system bydefault goods free taken ..
    but  when i was doing GR (MIGO)for  this P.O  ..system does not show the storage location in where tab (migo)...but document is posted .. stock can be shown at plant level ..if i go storage location ..stock does not show
    I think u have understood what i have done..pls guide me ..where i did mistake
    regadrs
    sesidhar
    regards
    sesidhar

    Hi
    1. Create Subcon P.O for material A0001X500G qty 100 ..Vender dummy. In P.O enter the Account assignment (costumed ...) item cat L... System automatically taken FREE tick mark...And net price value zero.. ..Saved p.o
    2. Transferposting MBIB movtype 541 materials provided to subcon dummy vendor. Post the document
    3. Then GR for this .P.O...Movtype 101 for P.O material and 543 movtyp for consumed material. Here in where tab storloc not displayed ...this 101 movtype material where it goes...
    Material A0001X500G stock is increased and A00020X500G stock is decreased... And I want accounting documents for GR 101 movt material and consumption material 543 materials...
    Service charge free ...I think ur under stand my problem...this we are called PACKCONVERSION...Through Subcon P.O....Pls..Guide me...Can we follow this procedure or not...If not...Pls tell another solution for this scenario
    regards
    sesidhar

  • Storage location field missing while doing GR with PO number

    When I receive goods from a PO, the storage location field missing from MIGO with 101. Material been extended with storage location and entered in PO. But sloc field totally greying out while I receive goods with PO.
    I tried other way to receive goods , but storage location disappears when I save it.
    MMBE shows stock as on order before reciept , after  I post goods, material document created but stock disappears. Not even in the plant.
    Can anyone help , please?

    <i>The following from other message thread solved my problem....</i>
    Stephen Birchall  
    Posts: 1,095
    Questions: 1
    Registered: 3/27/07
    Forum points: 1,566 
       Re: Material Classifications and Purchasing cycle  
    Posted: Apr 23, 2007 9:26 AM    in response to: Dushyant C Koth...       Reply      E-mail this post 
    Hi,
    You create the material in MM01 and select the non-valuated stock material type.
    When you create a PO for this material the system will ask you to enter an account assignment category (such as K for cost centre etc.) Indicate the GL etc that you want the costs to be posted to (Stationery, office supploes etc.).
    When the items are received, post the GR as normal (with MIGO). At GR the total value of the items will be posted to the correct financial accounts and the stock quantities will be updated.
    Then when you have consumed anything you post a goods issue (MB1A or MIGO) and this does not post anything to the financial accounts (it was all posted at GR) but it does reduce the stock figures.
    This process is ideal for ANY low value / high volume items, because the stock is managed correctly but you do not have many hundreds of tiny financial posting as each low value item is consumed.
    Steve B

  • Storage location not found in MIGO for 101 movement type

    Hi all,
    While posting goods receipt in MIGO for purchase order using 101 movement type,i am not getting the storage location field..Though goods is getting posted in migo transaction,it is not getting updated in the stock while seeing it in mmbe...
    can anyone help me..
    Thanks&Regards,
    Hari

    Hi,
    When ever we purhcase a material , it can be for two purpose
    1. Material to Stock
    2. Material for Direct consumption
    If you wish to stock the material Material No is required and Cost Center Assignment is not required. In this case when you create Goods Receipt (MIGO) storage location will be asked.
    If you have given a Cost Center or say any other Account Assignment, then at the time of GR (MIGO) storage location would not be asked, as the system assumes that it is for that particular cost center.
    I think in your case you have given some Account Assignment category in your PO. Please check.
    Hope it is of your use. Please reward.
    Nikhil

  • MB5B - Stock on posting date doesn't show Storage Location field

    Hi All,
    I run report MB5B - Stock on posting date with Stock Types = Storage Loc/Batch Stock, but the report doesn't show
    Storage Location field in result.
    How can I see it in this report?
    Thank you very much for your kind support!
    Cao Huy.

    hi
    what i think i sthis report is only for the OPENINGand CLOSING stock for the period or day
    now whenu give SL field then system will only concider stock from that SL
    the filed of SL will not be viewable in report as it is just opening and closing balance
    regards
    kunal

  • How can i add STORAGE LOCATION field which is not...............

    hi,
    sap gurus,
    good morning to all,
    how can i add STORAGE LOCATION field which is not in the standard tables namely
    KOMP, KOMK, and KOMG.
    how to include it in our FIELDS FROM FIELD CATALOGUE.
    if we include this field is there any impact on the standard tables.
    plz let me know this.
    bcz
    we are selling our products in two ways
    (1). one is straight from factory ie direct sales from factory
    if customer asks for excise invoice then we will sell thru factory and keeping freight in mind we will
    deliver him which ever is economical either rail or road.
    before coming to second case of selling the goods
    we will do STOCK TRANSPORT ORDER from plant to different storage locations.
    if we did STO thru road we have to sell the goods thru road only.
    if we did STO thru rail we have to sell the goods thru rail route only.
    (2). if the customer is not asking any excise invoice then we will send the goods thru depo/storage
    location which is not registered under excise.
    if the goods came by road then it will be delivered by road only.
    if the goods came by rail then it will be delivered by rail only.
    my logic here is
    basing on the
    storage location, transportation types, and distance i want to create condition record
    that captures exact frieght at the sales order level.
    confirm whether i am right or wrong.
    regards,
    balaji.t
    09990019711.

    Hi,
    It is not recommended to add new fields to any SAP standard tables. It disturbs the whole SAP functionality.
    But if you have no choice expcept to change the standard tables to meet your requirement -  then you need an access key to modify the object, which is available from the market place.
    Nevertheless, the better option is to create a 'Z' table with the required fields and use that accordingly.
    Changing standard tables will have serious impact when you apply patches or do an upgrade on the existing functionality.
    REWARD POINTS IF HELPFUL
    Regards
    Sai

  • Making Storage Location field mandatory in Work Order

    Hi
    As per our proces, if PR is created from work order and if there is no storage location in work order then PO will have warehouse address as a shipping address. So it is expected that PR must have storage location details when it is created from work order to avoid incorrect shipping address in PO.
    So, I want to make storage location field mandatory in components tab of work order.
    Also I want to avoid the users to deliberately removing the storage location and making it blank.
    Regards
    Prakash

    Hi,
      You will have to use one of the below mentioned user exits  to accomplsih this requirement.
    CNEX0026 Maintenance order: General check for material
    CNEX0027 Maintenance order: Determination of plant or storage location for component
    Thanks
    Narasimhan

  • Add storage location field into report COOIS

    When i check the Production order Storage Location is showing under Goods receipt Tab.When i execute the order COOIS Storage location field is empty.
    Where and what to configure to pull storage location into report COOIS?
    Thanks
    Rafi

    Hi Mohammed,
    Ideally it should come, field storage location is fetch from the GR tab from production order. May be PP guy can help you much better.
    Regards
    Mohit

  • Mandatory the Material Quantity and Storage Location Field in Order

    Hi Expert,
    Please advise. how can i set the Maintenance order,
    If Material field is Filled
    Then Mandatory the Quantity Field and Storage Location Field.
    Thank You
    Best Regards

    Hello,
    Please Use Below User Exits to get your Functionality
    IWO10009 --->PM Order Check for 'Save' Event
    CNEX0026--->general inspection of material
    Regards,
    Rakesh

  • Storage location field in service PR

    Hi,
    I am not able to find the storage location field in service PR generated through PS. This field is available for material component but not for external activity with service.
    Actully i have a project which have multiple storage location thats why i need that field for external service PR
    Regards
    Kalpesh

    Hi,
    there is no need of storage location for external services.
    storage location:
    storage location at which the material is stored.
    an organizational unit allowing differentiation between the various stocks of a material in a plant.
    regards,
    sandeep

  • Making storage location field mandatory at contract level

    Dear All,
    I want to make the field storage location mandatory at contract level.Is there any configuration setting to make storage location mandatory at the time of contarct creation.
    please suggest.
    thanks in advance
    ravi k

    sapuser k 
    1. IMG --> SD --> BF --> Log of Incomplete Terms --> Define Incompleteness procedure (Double Click)
    Choose "A - Sales Header", Click New Entries, Create say 55 -  Contracts
    Click "New Entries", Enter Table = VEDA, Choose Field (Storage Location Field ) and Status.
    Click Save
    2. IMG --> SD --> BF --> Log of Incomplete Terms --> Assign Incompleteness Procedure
    Assign Procedure to sales document Types
    WK1 = 55
    Then Click save
    Regards
    Sathya

  • Storage location field mandatory in PR

    Hi ,
    We want to make "Storage location" field mandatory in PR for  "_Document Type and Account Assignment" Combination._
    Like we have a PR document Type ZDM for raise a PR for materials, we want to make STORAGE LOCATION field mandatory if ACCOUNT Assignment in line item is BLANK.
    In case Account assignment is K then this field should be NON-MANDATORY and preferrably should be greyed out.
    Is there is any standard SAP settings for that
    Regards
    Shrey

    Hi,
    Use the user exit -> MEREQ001
    Hope the above helps.
    Regards,
    Vivek

  • Make the Storage Location field in Grey mode in Delivery (picking Tab)

    Hi Experts,
    Pls suggest me to how  make the storage location in Picking Tab of  Delivery to Grey mode .
    Regds
    Rajiv

    In tcode U have to enter Transaction code  VL01N
                                        Transaction variants field just Press F4 to get already buid transaction variant else u have to create the ur screen variant by clicking the button named Create in Below menu option .
    If the variant already exist -> enter
    u will get the data in the lower half of the screen , select the transaction Variant with field for storage location , generally datais distributed in delivry doc at header and item level so for storage location u have to take the one with item level data .
    There u will find the all the fields which are there in Delivery doc at item level with check boxes in front of them please goto storage location field and check the check box saying output field ( This means this field will be display only) Save and try and create the delivery again.
    This will be display only in VL01N

  • In va02 tocde after entering the data only storage location field is not saving.why?

    Hai
    in va02 tcode after entering the data only storage location field is not saving. why?

    Hi Purnaiah,
    Are you using any user exit for this or not?
    Check for the below exit, this may be the place where you can implement your code for saving the value.
    SAP MV45AFZZ calling the user exit with a form USEREXIT_SAVE_DOCUMENT
    Regards,
    Rafi

  • Storage Location field not appearing in Mat Doc.

    Dear All,
    While doing GR 105 for PO, the Storage Location Field is not appearing in Mat Doc. Moreover, the TO is not getting created immediately while saving the Mat Doc. I don't know why this is happening?
    The material has both Qty/Value Updation ticked and all other related configuration is perfect like Mvt. Types/Ref. Mvt. Types etc.
    Please help to resolve.
    Regards
    Samier Danish

    Dear rksap7284,
    Thanks for your inputs. As I already mentioned confirguartion is perfect yet there is no St. Loc. field being displayed while Mvt. type. 105. I'll provide more information as below:
    - PO has Acct. ***. Cat as "P" as it has WBS element.
    - Material Type is ERSA
    - GR 103 has happened.
    Awaiting your reply
    Regards
    Samier Danish

Maybe you are looking for