Storage Location is not popullating in the PO(for stock materials)
Hi All,
we are facing a issue regarding the Storage location in SRM 5.0.(patching SAPKIBKT14) when we try to create a PO with Stock material then the PO will be created but without Storage location.But during the confirmation it will give error saying "Enter Stor. Location ".
if we enter the storage location manually it will work fine , but we need it should take automatically like other materials.Note:There is not problem if we do SC .. it will populate automatically.
Please help us.
Regards
Channappa Sajjanar
Hello Channappa,
Please maintain storage location in field "Storage loc. for EP" in MRP2 view via transaction code MM02. Once this is maintained the storage location here, it will automatically populate in the purchase order.
Hope this helps.
Thanks & Regards,
Sunil Katyare
Similar Messages
-
CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error
I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html>I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html> -
Billing tab of BP are not populated in the sales order automatically
Hi
Business Partners Billing Tab details like customer pricing procedure, currency, price group, Customer group etc are not populated in the Sales order automatically?
I have checked the pricing procedure determination also.
ThanksThanks problem is solved.
-
Message type is not populating in the Inbound idoc control record
Hi,
I have created an Inbound Idoc function module and have done the necessary Idoc settings. But, while testing in WE19, I observed that control record is not getting populated with message type and it is dumping.
The settings which I have done in WEDI as follows:
1. Created Idoc segments with necessary fields and released
2. Created Idoc type for the segment type
3. Created message type
4. Assigned message type to basic type
5. In the inbound processing settings,
filled the ALE attributes with the Idoc function module name and input value '0'
6. Assigned FM to basic type and message type
7. Created process code and assigned the process code to message type
Please let me know, the reason for the message type not populating in the control record. Useful answers will be surely rewarded.
Best Regards,
MallikaHi,
Maintain partner profile (Transaction code WE20) for the message type you defined in WE81 and put your process code in partner profile and check your logical system settings also in transaction SALE.
Thanks
Rahul -
Days supply is not populating in the planning book
Hi Experts,
When I select multiple products in the planning book, the value is papulating as total but if I drilled down to individual product then days supply(Key figure) values are not populating in the planning book.
Please let me know if any idea.
Regards,
HrishiFrom what you mention it looks like you do not use the standard SNP Planning Book. Was the macro inactive so that you had to regenerate?
When you move a macro from workbench to level change it should not require to be regerated.
Please check if following macros are active (green) under level change in sequence
Determine Workdays
Layout Attributes
Drill (Level)
Else compare the macros and sequence in the standard SNP Planning Book with the Planning Book you are using.
The Day's Supply (All: Day's Supply) and Determine workdays macros are essential for populating the day's supply keyfigure.
Thanks,
Somnath -
Ship To location is not merging with the Shipment address in Purchasing 11.
As we can see in the attachment, the “Ship To” location is not merging from the “Ship To” on the Oracle PO, it appears it’s merging from the field on the Shipments tab/button (red boxes). We’d like to change that to have the “Ship To” on the PDF pull from the “Ship To” field where the green arrow is pointing. We’re not sure why both of those locations don’t always match (b/c sometimes they do match), however I think the quicker fix would be to change the merge fields, and then maybe at a later time we can look into why they don’t match.
http://docs.oracle.com/cd/A99488_01/acrobat/po115txn.pdf
I am checking the pdf , it does not give why this could be happening
It talks of different fields but it does not give the information why this could be hapening
Any thoughts or tables to be updated
thanks again
sri -
Notification when departing or arriving a location does not work in the latest version of find my friends (ios 7).
This is a user to user community, Apple are unlikely to read your comments, if you have any suggestions that you think might enhance iCloud you can send Apple your feedback here.
-
Slave instance can not synchronized with the master for a long time
Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170 Number of PERM messages not acknowledged
9245 Number of messages queued due to network delay
172415 Number of messages discarded due to queue length
25880 Number of existing connections dropped
3407 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994 Next LSN to be used
0/0 Not waiting for any missed log records
328872/466092 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
2323 Number of duplicate log records received
0 Number of log records currently queued
6768 Maximum number of log records ever queued at once
55284 Total number of log records queued
120M Number of log records received and appended to the log (120475988)
111 Number of log records missed and requested
2147M Current master ID (2147483647)
2 Number of times the master has changed
0 Number of messages received with a bad generation number
8505306 Number of messages received and processed
12 Number of messages ignored due to pending recovery
471869 Number of failed message sends
12M Number of messages sent (12959945)
0 Number of new site messages received
1 Number of environments believed to be in the replication group
990543 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup complete
6244678 Number of transactions applied
0 Number of startsync messages delayed
1 Number of elections held
1 Number of elections won
No election in progress
0.057097 Duration of last election (seconds)
8944103 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
5273M Number of records added to a bulk buffer (5273592170)
10M Number of bulk buffers sent (10490865)
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
slave db_stat:
0 Number of PERM messages not acknowledged
0 Number of messages queued due to network delay
0 Number of messages discarded due to queue length
1454 Number of existing connections dropped
0 Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048 Next LSN expected
330433/2013808 LSN of first log record we have after missed log records
329543/5500501 Maximum permanent LSN
0 Next page number expected
0 Not waiting for any missed pages
0 Number of duplicate master conditions originally detected at this site
2147M Current environment ID (2147483647)
100 Current environment priority
49 Current generation number
50 Election generation number for the current or next election
5256M Number of duplicate log records received (5256599432)
3925284 Number of log records currently queued
3925285 Maximum number of log records ever queued at once
4880561 Total number of log records queued
3578038 Number of log records received and appended to the log
1912297 Number of log records missed and requested
0 Current master ID
1 Number of times the master has changed
0 Number of messages received with a bad generation number
12M Number of messages received and processed (12980442)
2 Number of messages ignored due to pending recovery
0 Number of failed message sends
1912307 Number of messages sent
0 Number of new site messages received
0 Number of environments believed to be in the replication group
0 Transmission limited
0 Number of outdated conditions detected
0 Number of duplicate page records received
0 Number of page records received and added to databases
0 Number of page records missed and requested
Startup incomplete
110568 Number of transactions applied
80 Number of startsync messages delayed
0 Number of elections held
0 Number of elections won
No election in progress
0 Number of bulk buffer sends triggered by full buffer
0 Number of single records exceeding bulk buffer size
0 Number of records added to a bulk buffer
0 Number of bulk buffers sent
0 Number of re-request messages received
0 Number of request messages this client failed to process
0 Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike -
The site in the Spanish App Store I reserved the iPhone 5 and would like to get it to turn. But I was told that if I'm lucky - I will come with an email confirmation. Excuse me, I'd like to reserve an honest in turn, not to play the lottery for luck. I am disappointed by the work Apple
It sounds as if AT&T has already told you they can't do what you want. It doensn't sould like anything that's fixable on your end.
-
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
I just bought a power adapter and it is not working, says "not charging". The same for the mobile charger. Anything I need to do in the setting?
The device is locked to the carrier it was purchased through unless you specifically purchased it as unlocked directly from Apple.
Only the carrier to whom it is locked can authorize it's unlocking. To do so, the user much contact them to start the unlock process. -
The tax code entered is not defined in the country for this company code
HI ALL
when we relase billing document to finance i am getting this below error
Diagnosis
The tax code entered is not defined in the country for this
company code.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the
system settings.
To do this, choose Maintain entries (F5).
1. Check whether the required tax determination procedure
is assigned to the relevant country. the Procedure
field is in the detail screen.
2. Create a new tax code if required.
Thanks & Regards
AarmanYou can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country DE assign tax procedure as TAXD and save.
Hope this helps.
Regards
SATYA -
Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?
In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
If you have software like Advanced SystemCare (Surfing Protection feature) that might reset some files to older versions to protect these files against changes then check the settings or uninstall this software. -
I can not to received the email for verified by apple id
I can not to received the email for verified by apple id
1. Check spam folder
2. Check junk folder
3. Check Rescue Email -
Amount is not coming into the Invoice for Warranty Order
Salute All !!
Amount is not coming into the Invoice for Warranty Order which is Free of Charge.
This amount is not going to Customers debtor A/C, means there is no any A/C posting for this specific Amount because this is free of charge Sale (Warranty Order).
This is required by A/C department to put Value in to the Invoice to show so Transporter can carry the material as 0 value material is unable to Transport.
Please provide solution.
Rgds
Srivastav
+91-9973504950Hi,
Because you are not billing to customer the net amount is zero-
You can do like bill the component as regular item and give credit note against it.
or else create seperate billing output type assign this to proforma invoice- print the cost of item by pulling it in new smart form.
(this is not very good idea because , customer knows the actual cost of the item)
Thanks
Chidambaram
Maybe you are looking for
-
After 12 years I have to say goodbye to Dish because my old oaks are getting too tall and too wide and I don't have a clean line of sight...so I'm switching to FiOS. I've gotten used to the best DVR in the industry, and I understand that there are n
-
HI I tried installing ios7 via itunes. It took a back up of the iphone no problem, then installed ios7. When I went to restore the iphone the last back up was not the one done today. When i tried to restore it I got and error message 2003 which is no
-
HT5731 can I begin watching a movie on itunes while it is still downloading?
Can I begin watching a movie I just rented while it is still downloading?
-
Only to import JAVA CLASS and JAVA SOURCE from .DMP file using IMPDP
hi, I have a schema X, In that schema some of the *"JAVA CLASS" and "JAVA SOURCE"* objects are missing .. The procedures ,functions..etc objects were updated at X schema.. I have 1 dmp file of Y schema , containing the missing "JAVA CLASS" and "JAVA
-
A few days back I received a mail from one of my contacts with the subject " confidential document" , I don't know what I was thinking but I opened it on my ipad mini. I immediately realized that it was a spam mail , I closed it and sent a note to th