Storage Problem - Windows Mobile 6 Classic

Hi,
I'm having a problem with memory for MAM's application. We're using an Psion Workabout 2nd Generation Long with 128 Flash Memory and 128 Ram Memory. When we sync the data and try to execute de MI appication it sends me a message that it don't have enough memory. Then I've gone to Windows Mobile Setting -> System -> Memory and gives me the info of two memories.
Storage
Total 52,79 mb
In Use: 52,54 MB
Free: 0,00
Program
Total 123,12 MB
In Use: 53,52
Free: 69,50 MB
We've bought an SD memory of 1 GB, it's posible to use this memory to record the Sync data there?
Thanks,
Alexandre

Hi Alexandre,
128MB of RAM Memory is more than sufficient to run both MI and MAM together. Just that you will have to increase the memory allocated to the JVM Process. The steps you mentioned will not work. In order to increase the memory allocation, copy the MobileEngine.lnk or MIServer.lnk file present in \Windows\Startup folder onto your desktop, then right click and choose the option Send To ->Notepad. Now add the -ml parameter with an argument like 64000 (this value can be changed depending on the memory available on PDA). -ml is an command line argument for the Creme JVM which stands for Memory Limit (ml). The parameter passed to this argument indicates the amount of memory that would be allocated for this particular process. In this case 64MB(64000KB) will be allocated for JVM. The contents of this file will now be 255#"\Windows\CrEme\bin\CrEme.exe" -ml 64000 -Of -cf MI\creme_listOfJars.txt com.sap.ip.me.core.Startup -home:/MI. Copy this file back to \Windows\Startup after you delete the old one and restart the PDA. This will solve your problem.
Best Regards
Sivakumar

Similar Messages

Password reset problems - windows mobile

I check my emails using outlook and my windows mobile phone - when it all works very useful.
Today without warning Outlook said password was wrong. Checked on Web yahoo and that said there has been suspicous activity and that I had to reset password and security question. Did that - new password set. Outlook worked.
Tried to to check using my phone, which had the old password and email looked up again. Went through this routine several times.
Now thinking about this should I have deleted the yahoo acount on the phone so the email server did not recieve what had become a wrong password?
How do you change yahoo password on a phone without sending the password?

This sounds like the problem that has beset BT Yahoo! for years and is one of the reasons BT is migrating customers to a new platform. It usually goes away after some days but can sometimes be overcome simply by logging into webmail and straight out again.
You can click the white star next to this message if you think it was helpful.

Where to find "Windows Mobile 6 Professional Images"?

Hi All,
I do have a problem where the sun_jcw won't start on my iPAQ/HP 214 device running Windows Mobile 6.0 2007 because the executable is not signed with a trusted certificate.
I think I found almost the answer where Terrance states in http://weblogs.java.net/blog/terrencebarr/archive/2009/07/just_released_j.html the following:
==========================
Took me a while to figure out
Submitted by fatbuttlarry on Thu, 2010-01-14 21:47.
For those using the Windows Mobile 6 emulator and are receiving the message:
"The file 'JavaFX' can not be opened. Either it is not signed with a trusted certificate, or one of its components can not be found. You migth need to reinstall or restore the file" Make sure you are using the Windows Mobile 6 Professional Images. The Windows Mobile 6 Classic image would cause this error every time!!!! -Tres
Login or register to post comments
==========================
What does he mean with "Windows Mobile 6 Professional Images" exactly?
Any help is greatly appreciated because this problem is blocking any further progress.
Regards
André
p.s. I embedded this question in http://weblogs.java.net/blog/2009/07/26/just-released-javafx-mobile-12-ea-windows-mobile#comment-809581
p.p.s : I hope that I don't need a full Windows Mobile 6 SDK with all the other pre-req's
Edited by: 830814 on 24-Jan-2011 13:51
Edited by: 830814 on 24-Jan-2011 14:53

tarheel2013 wrote:
I have a Mac OS X 10.5.8 Leopard and just partitioned my disk to download Windows with Boot Camp. I found the student discount for Windows 7 Professional Upgrade on Digital River but since it's a Digital download it won't work with the Mac because of the .exe file. Everyone who has installed Windows, did you pay full price for a new disk? Is there a way to get a disk without paying extra? And Windows 7 64-bit works with Boot Camp 2.0 on a Mac OS X 10.5 right? Just curious because I don't want to spend a lot of money only to find out something doesn't work
You can probably get Windows 7 to work with Boot Camp 2.0, but it is definitely not supported. I don't believe that Windows 7 was officially supported until Boot Camp 3.
As for your 64-bit windows, that would depend upon the age of your Mac. I seem to recall that with some of the older MacBook Pros, 64-Bit windows is not supported, and doesn't work for many who have tried.
Perhaps if you could give us a little more detail about your Mac, we could tell you what your odds are in getting it all to work together.

Windows Mobile 5.0 to Windows Embedded HandHeld 6.5 Classic (Form OK Button Missing)

Hi,
I have a Windows Mobile 5.0 app that works fine but when I deploy it to a Windows Embedded HandHeld 6.5 Classic device the 'OK' button in the top right hand corner of the form has disappeared.
Any idea's
Thanks
Paul.
Paul Wainwright

The following MSDN threads explain the cause of the problem and provide some guidance on how to change your application to resolve the problem:
https://social.msdn.microsoft.com/Forums/en-US/6cda1576-2cf7-4b2a-9e57-0c55f1c2f500/ok-button-dissapears-on-windows-mobile-65?forum=netfxcompact
https://social.msdn.microsoft.com/Forums/en-US/fcd10f3f-3094-44f9-bcbb-d8874ece5226/wm-65-classic-missing-ok-button?forum=windowsmobiledev
Another solution, instead of changing your application, is for the user to simply press the physical Ok button on the device's keyboard (assuming that the device has an Ok button). For example, some rugged devices such as Intermec or Motorola
have a physical keyboard with an Ok button, or another physical button can be re-mapped to act as the Ok button. Contact your device supplier if you need to do this.
Steve

SSO problem on Windows Mobile with WAS Java 7.0 and R/3 4.7

We have a curious single sign-on problem with custom WM-app.
The application is developed using WD Java and currently runs on WAS 7.0 SPS10. WAS makes calls to several RFC:s on 4.7 Enterprise and authentication is done using SSO.
The enduser device is a handheld running Windows Mobile and the browser is a vendor (HHP) provided Mobile IE based HandHeldWeb. Because of the poor usability of the default login on handhelds we created a custom J2EE Web Application JSP which does the login to the WM-app.
On a PC browser everything functions normally, but occasionally with the mobile device no data from R/3 is displayed. As if SSO didn't work. Sometimes, if transaction 1 doesn't work and the user comes out of it, then runs transaction 2 which makes an RFC call and then returns to transaction 1 it works. Sometimes..
This problem does not occur on mobile device when the default login is used. And as stated previously, on a PC the custom login works fine.
-Erno

Hi,
Currently SAP is selling the Software in Business Suite .
If you are purchasing the SRM 7.0 .It will come as Business suite . It will contain
1. SRM 7.0
2.CRM
3.PLM
4.SCM
5. ECC 6.0 wiht Eph 4
When you are getting the ECC 6.0 in this package why to use SAP R/3- 4.6C
So better you upgrade both the SRM and R/3.
I would like to know if SRM 7.0 and R/3 4.6C is compatible in first place.Will it work?
It will work but in the long run you will get lot of Problem.Since SRM 7.0 is Based on Webdynpro technology
Regards
G.Ganesh Kumar

HT2305 Problem with syncing Ipod classic in Itunes with Windows 8

I am having problems getting my Ipod classic to sync with Itunes. Is 2.0.4 the current firmware for me to use with my Ipod using Windows 8? If not, please let me know what firmware I need to use. Thank you.

Hey catwoman001,
Thanks for the question, and great troubleshooting so far! iPod software version 2.0.5 is available for the iPod classic 160GB (Late 2009). If this is your model, you may want to update the iPod. If you are having issues with your iPod, the following troubleshooting assistant may help:
Apple - Support - iPod - iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Additionally, you may want to check out these articles:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M.

Window Mobile 6.0 problems?

I have tried MI 2.5 on Windows Mobile 6.0. Sometimes it does not work properly by throwing a DNS error. I think the way we are using the advanced networking functionality in the OS is causing a problem. I would like to mention that as of Windows Mobile 6.0 we have Network Folder (Just like mapping of Network Drives in My Netwok Places in Desktop) and RDC- Remote Desktop Functionality. I feel that if the product development team, along with nsicom (CreMe), addresses the network functionality issue, we can have all our 2.5 and even 7.1 apps running smoothly with indows Mobile 6.0. Has anybody tried 2.5/7.1 apps with Windows Mobile 6.0?

Hi,
yes, I have tried it and it was working fine.
Could it be, that your MI is not working when you get the DNS error? MI needs its time to start and it can be, that it is stopped because of low memory on the device. If you try to access the URL in both cases, you will get this message.
Normally, if MI is working, localhost:4444 as URL is working fine - at least to see the start screen.
Regards,
Oliver

Whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?

Hi
I have a windows 7 and whenever I play anything on Windows Media Player Classic, the middle mouse button does not work as a vertical scroll in firefox, but instead shows a horizontal scroll that does not scroll the web pages. How can I fix this problem?
I hope that was clear.
Thnx

Hello kmanthie,
I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
I worked on behalf of HP.

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck!

Windows Mobile Connection Problem

I have a esmertec jbed 20070802.2.1 VM installed on an Windows Mobile Phone (At&T Tilt). The VM is not allowing to create any datagram servers or socket servers on any ports. I tried all ports and tried both signed and unsigned midlets
Any idea why this happens?
Thanks in advance

Uninstalling Access Connections did the trick.

WRT300N Problems with Windows Mobile devices

Hello.
After installing the latest firmware my HP Rx3715 PDA (windows mobile 2003) is not able to connect to my wireless WRT300N network. It keeps prompting me that the WPA Key i incorrect. If I disable WPA (No encryption) it works fine.
I tried som easy wpa codes like: 12345678 but it doesnt work!
My Settings are:
Radio Band Wide 40mhz (tried also normal)
wide channel 6
standard channel 8
SSID Broadcast Enabled
PSK-Personal
Enc. TKIP
key renwal 3600

does any of the wireless computer connect to the router with the WPA security ?? and what is the algorithm that the WPA is using i.e is it TKIP or AES ??

WINDOWS MOBILE 5.0 SDHC card PATCH

I own an iPAQ rx1900 pocket PC. It cannot read sd memory cards over 2GB. Neither can it read high capacity. are there any compatible software upgrades?

The following MSDN threads explain the cause of the problem and provide some guidance on how to change your application to resolve the problem:
https://social.msdn.microsoft.com/Forums/en-US/6cda1576-2cf7-4b2a-9e57-0c55f1c2f500/ok-button-dissapears-on-windows-mobile-65?forum=netfxcompact
https://social.msdn.microsoft.com/Forums/en-US/fcd10f3f-3094-44f9-bcbb-d8874ece5226/wm-65-classic-missing-ok-button?forum=windowsmobiledev
Another solution, instead of changing your application, is for the user to simply press the physical Ok button on the device's keyboard (assuming that the device has an Ok button). For example, some rugged devices such as Intermec or Motorola
have a physical keyboard with an Ok button, or another physical button can be re-mapped to act as the Ok button. Contact your device supplier if you need to do this.
Steve

Runtime error on Windows Mobile 6.1 after install

I have a Windows Mobile 6.1 Classic device (non-phone),
CE OS 5.2.21041 (Build 21041.1.6.0)
Processor is an ARM1136 MX31
Memory: 115.09Mb
I installed the 3.0 SDK, and copied and installed the CAB file on the device per the instructions on the website.
When I click on the "Sun Java CLDC Emu" icon, I get the following error message:
"The file 'sun_jwc' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file"
I tried removing and reinstalling - same error. Everything seemed to go ok with the CAB installation.
Any suggestions as to what to check/test?
Regards,

Hello,
we don't sign the java runtime cab nor the executables inside it. So to be able to run it on a device, the device needs to have security lowered at least to the level at which the user is asked for permission when he is installing / running an unsigned cab / executable. In the context of Windows Mobile security, it means that the device's security configuration needs to be set to "Two-Tier-Prompt", "One-Tier-Prompt" or "Security-Off" (see http://msdn.microsoft.com/en-us/library/ms839681.aspx for more details).
Changing of the security configuration might require device manufacturer's or operator's assistance.
In some cases it can be done by the user. Some of them are listed below:
1) the user has a registry editor application which can run on the device and can change the device registry (such application needs to be signed by a certificate which is trusted by the device)
2) the device has installed Microsoft Windows Mobile development certificates
3) the device allows the user to install the Microsoft Windows Mobile development certificates
Of these the 2 and 3 is more likely, so If it's your case, try the following:
1) Install Windows Mobile SDK (http://www.microsoft.com/DownLoads/details.aspx?familyid=06111A3A-A651-4745-88EF-3D48091A390B&displaylang=en)
2) Install "<WM SDK>/Tools/Security/SDK Development Certificates/Certs.cab" on the device
3) Go to "<WM SDK>/Tools/PocketPC/Security/Security Configuration" and use one of the cpf file to change the device's security configuration (see <WM SDK>/Tools/PocketPC/Security/Security Configuration/ReadMe.txt)
Regards,
Java ME SDK team

Remote Desktop Connection between Windows Mobile 6.5 and server 2012

Hi all,
We have problem with remote desktop connection. The server that I want to connect is 2012 R2.
We have no trouble with server 2008. I searched from internet, there are solutions on server side(I am not sure if these suggestions solve the problem), but our customers don’t want to solve this problem
on server side because it is diffucult and risky.
Is there a solution on handheld terminal side to do?
Operating system: WM 6.5 classic(Professional o.s. has no effect, same error continues)
Any help will be appreciated from your side.
With Best Regards.

Hi,
What is the precise error message you are seeing? What are the exact symptoms?
I don't remember what version of RDP/featureset is supported by Windows Mobile 6.5. Perhaps the client does not support Network Level Authentication, which is required by default on Server 2012 R2. You can enable non-NLA connections by
unchecking Allow connections only from computers with Network Level Authentication in Server Manager -- RDS -- Collections -- Properties of collection -- Security tab.
Lack of NLA may not be the cause of the issue you are experiencing, however, if it is the only way to solve it would be to change the server setting or to potentially install a new client on the device that supports NLA.
-TP

Not Connecting To Windows Mobile Device Center

I want to be able to connect with a Windows Mobile Device through Windows Mobile Device Center, within a Virtual Machine. When connecting through the Hyper-V Manager and through Remote Desktop, under "Other supported RemoteFX USB devices",
I can see the Symbol USB Sync Cradle. In the VM, in Device Manager, I don't see a USB connection. In the VM, I don't see any meaningful errors in the Event Viewer.
Host: Windows 8.1 Enterprise Hyper-V on a Domain. Upgraded from Windows 8.1 Pro. When this computer was originally installed with Windows 8 Pro, Hyper-V was enabled. I removed Hyper-V, and installed VMWare Player, because I wanted
USB Pass-through. I then uninstalled VMWare and installed VirtualBox. Recently, I uninstalled VirtualBox, upgraded to Windows 8.1 Enterprise, and enabled Hyper-V.
Virtual Machine OS: Windows Server 2012 R2 on a Workgroup. Started out with being a VMWare VM, using VMWare Player. Moved to VirtualBox. USB Pass-through was working in both those virtual environments. Used Disk2VHD to convert the
VM to a VHDX file.
On the Host:
Windows Mobile Device Center is connected to a Motorola Windows Mobile Device (MC959X) sitting in a Symbol USB Cradle. The OS on the scanner is Windows Embedded Handheld 6.5 Classic CE OS 5.2.29217 (Build 29217.5.3.12.26). Advanced Networking
(USB to PC) is not enabled.
Enabled RemoteFX.
In the RDP file, and in the Registry, added the GUID's for:
WPD "{eec5ad98-8080-425f-922a-dabf3de3f69a}";
Windows Mobile "{6AC27878-A6FA-4155-BA85-F98F491D4F33}";
USB Device "{88BAE032-5A81-49f0-BC3D-A4FF138216D6}";
Windows CE USB Device "{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}";
GUID_DEVINTERFACE_USB_DEVICE "{A5DCBF10-6530-11D2-901F-00C04FB951ED}"
Ran "sfc /scannow"
All Microsoft Updates are current.
What am I missing?

Thank you for your efforts. I have followed those instructions, but I am still not all the way there yet.
Now, on the Guest, in the Device Manager, under Mobile Devices, I see the Symbol USB Sync. But Windows Mobile Device Center still does not connect.
In the Application Event Log, these Events are being generated:
Log Name:      Application
Source:        WcesComm
Date:          12/8/2014 12:45:54 PM
Event ID:      7
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DansWinServ12R2
Description:
Windows Mobile-based device failed to connect due to Start USB Connection (0x80004005) failure (see data for failure code).
Event Xml:
< Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="WcesComm" />
    <EventID Qualifiers="49152">7</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-08T20:45:54.000000000Z" />
    <EventRecordID>7468</EventRecordID>
    <Channel>Application</Channel>
    <Computer>DansWinServ12R2</Computer>
    <Security />
</System>
<EventData>
    <Data>Start USB Connection (0x80004005)</Data>
</EventData>
< /Event>
Log Name:      Application
Source:        Microsoft-Windows-ApplicationExperienceInfrastructure
Date:          12/8/2014 12:45:54 PM
Event ID:      1
Task Category: None
Level:         Warning
Keywords:
User:          DANSWINSERV12R2\dreisman
Computer:      DansWinServ12R2
Description:
The application (Windows Mobile Device Center 6.1, from vendor Microsoft) has the following problem: To function properly, Windows Mobile Device Center 6.1 must be reinstalled after you upgrade Windows.
Event Xml:
< Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-ApplicationExperienceInfrastructure" Guid="{5EC13D8E-4B3F-422E-A7E7-3121A1D90C7A}" />
    <EventID>1</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>0</Task>
    <Opcode>2</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-12-08T20:45:54.044605800Z" />
    <EventRecordID>7469</EventRecordID>
    <Correlation />
    <Execution ProcessID="4832" ThreadID="4960" />
    <Channel>Application</Channel>
    <Computer>DansWinServ12R2</Computer>
    <Security UserID="S-1-5-21-3621870490-2575533387-1312730109-1001" />
</System>
<EventData>
    <Data Name="DBType">15</Data>
    <Data Name="AppNameCount">33</Data>
    <Data Name="AppName">Windows Mobile Device Center 6.1</Data>
    <Data Name="VendorNameCount">10</Data>
    <Data Name="VendorName">Microsoft</Data>
    <Data Name="SummaryCount">102</Data>
    <Data Name="Summary">To function properly, Windows Mobile Device Center 6.1 must be reinstalled after you upgrade Windows.</Data>
    <Data Name="SessionID">1</Data>
</EventData>
< /Event>
I have reinstalled Windows Mobile Device Center several times.
Any thoughts?

Storage Problem - Windows Mobile 6 Classic

Similar Messages

Maybe you are looking for