WINDOWS MOBILE 5.0 SDHC card PATCH

I own an iPAQ rx1900 pocket PC. It cannot read sd memory cards over 2GB. Neither can it read high capacity. are there any compatible software upgrades?

The following MSDN threads explain the cause of the problem and provide some guidance on how to change your application to resolve the problem:
https://social.msdn.microsoft.com/Forums/en-US/6cda1576-2cf7-4b2a-9e57-0c55f1c2f500/ok-button-dissapears-on-windows-mobile-65?forum=netfxcompact
https://social.msdn.microsoft.com/Forums/en-US/fcd10f3f-3094-44f9-bcbb-d8874ece5226/wm-65-classic-missing-ok-button?forum=windowsmobiledev
Another solution, instead of changing your application, is for the user to simply press the physical Ok button on the device's keyboard (assuming that the device has an Ok button). For example, some rugged devices such as Intermec or Motorola
have a physical keyboard with an Ok button, or another physical button can be re-mapped to act as the Ok button. Contact your device supplier if you need to do this.
Steve

Similar Messages

Nikon D800 raw files taken with Sandisk extreme plus 32GB SDHC card got corrupted. Able to preview them in Lightroom4.4 Library, but not able to import or transfer the files from card to computer. Any ideas on how to save images from Library Window in Lig

Hi, I have shot few pictures on 31st December night in RAW mode using Nikon D800 and Sandisk extreme plus 32GB SDHC card. It looks like card got some memory errors so not able to transfer the files from Card to computer. However I am able to view the pics thru Lightroom ver 4.4 Library, but when I tried to import them, it gives me an error stating that file can't be read.
Is there a way to save the pics from Library window in lightroom overcoming the card read errors ?
Thanks in advance

Hi SSPRENGEL,
Thank you for your response. Here is the error message I am receiving, I tried with various destination folders in the computer but it still gives the same error:. Just to let you know, I am able to import pictures into these folders from other memory cards.
I am able to finally at least extract the jpgs using the option suggested by elie-d

Satellite Pro A200 Windows XP, 4Gb SDHC Card does not work.

Hi,
I have had a Satellite Pro A200 installed with Windows XP, SP2 for some time - No problems there, a great piece of kit. However I recently have bought a new camera and splashed out on a Kingston 4Gb SDHC card. The manual for my A200 seemes to indicate that it my laptop is compatible with SDHC cards to 4Gb however when I push the card in the LED flashes blue briefly and then nothing happens. My SDHC card does not appear to be recognised by the system.
I see no errors in my OS event log and I have checked the slots operation by trying an older 512Mb SD card and that works fine.
Can anybody offer any help please?
For reference this laptop is a Model PSAE4E A200.
Many Thanks in advance
Simon

If the above fix does not work (which it didn't for me on a Satellite Pro A100 running XP), try
[http://support.microsoft.com/kb/923293] .
That one did the trick

Unable to Detect SDHC Card on Windows 7

Hi guys, recently I received a 4 gb sdhc card but when insert the card into the card reader & plug to the usb port, win 7 was unable to detect it. 1st thought was this sdhc card is bad but i when plug it to another win 7 pc it detects
straight away, so the card is not faulty. I tried uninstalling the usb driver & HID driver still can't detect. Notice that under the disk drives it does show 'Mass Storage Device USB Device' which means it actually did detect but won't show up
in 'My Computer' ..... Why? Hope someone can help to resolve this issue. Thanks

Here is the answer from Scandisk
STEP 1 - Backup the registry
1. Unplug the device from the USB port.
2. Run regedit.
Windows XP: Go to Start > Run, type in regedit and then click OK.
Windows 7, 8 and Vista: Click the Start button, type regedit in the search box, and then press Enter.
3. From the registry menu, choose File > Export.
4. Name the file SNDK.reg and save it to your desktop.
STEP 2 - Remove SanDisk info from the registry
WARNING: DO NOT delete any registry key other than keys that include VID_0781. Deleting registry keys other than keys that include VID_0781 MAY cause your computer to not boot properly.
1. From the registry menu, click Edit and choose Find.
2. Type in VID_0781 and click Find Next.
3. Once the search finishes, right-click the highlighted registry key and select delete.
4. Press the F3 key to find the next registry key that includes VID_0781.
5. Right-click the highlighted registry key and select delete.
6. Repeat this process until the search returns with No results Found.
NOTE: Under Windows 7, 8 and Vista, some registry keys may be protected and cannot be deleted. Simply skip over these keys if you receive a message that the key cannot be deleted.
7. Once all registry keys containing VID_0781 have been deleted, reboot your computer.
8. Plug the device into the computer after it's finished rebooting.

ATI Mobility Radeon X1600 graphics card Windows 8 driver missing

I just installed Windows 8 Enterprise Trial version on HP nx9420 laptop (2GHz dual core prosessor, 4gb memory, ATI Motility Radeon X1600 graphics card with 256mb own memory, 1680x1050 native display resolution) on second partition, side by side with existing
Windows 7.
Installation succeeded perfect, except Windows 8 couldn't install, nor did find from Windows Update display driver for ATI Mobility Radeon X1600 graphics card. Only Microsoft generic display driver was installed and it offered maximum 1450x800 resolution,
so not laptops native 1680x1050 screen resolution.
Windows 7 can install working ATI driver right from Windows Update for that graphics card (version 8.561.0.0 dated 1.12.2008).
Laptop manufacturer HP has latest, old driver for Vista (version 8.453.0.0 dated 22.1.2008), so I installed that, selecting compatibility mode Vista with setup-program in Windows 8. That installed, but seems to have some problems, telling of missing library,
maybe with some ATI extra diplay manager software and C++ 2005 library, that it installed.
MY QUESTION: Is there some problems with Windows 8 and that ATI Mobility Radeon X1600 graphics card? Why isn't the Windows 7 -version of ATI mobility radeon X1600 display driver available in Windows Update for Windows 8 too?

Thank you all of your thanks.
I can confirm that this solution works with Windows 10 Technology/Insider preview too. And surely works with forthcoming Windows RTM too.
Windows 8.1 and Windows 10 TP work both like a charm with nearly 10 years old HP Compaq nx9420 laptop, with Intel Core 2 Duo and ATI Mobility Radeon X1600 display adapter. Nice co-operation of "old" hardware and very Modern Windows OS.
So in brief:
If you have laptop with ATI Mobility Radeon X1600 or other X1000-series display adapter and
you want to install Windows 8, 8.1 or 10, do this:
0) First just install Windows 8.x/10. It will install Microsoft Generic display driver, but that doesn't support full resolution of ATI Mobility Radeon X1000 -series - for example it may show maximum 1400x1050 -resolution, thus your laptop display and Radeon
X1000 may support native 1650x1050, but you can't obtain that resolution with that Microsoft generic driver. So you need ATI-driver and you can get it this way:
1) With Internet Explorer (this doesn't work with other browsers) go to
Microsoft Update -catalog: http://catalog.update.microsoft.com/
2) Search "ATI Mobility Radeon X1600"
(or X1300, X1800 etc)
3) Sort search results by date (last update -column), latest on top. You will see drivers for Windows 7
- they will work with Windows 8.x and 10 too. There is certainly two of them; other is 32 bit only and other is 64 bit dirver.
4) Select proper driver version of them, according your Windows 32 or 64 bit, so click Add
5) At top-right click Show basket and then download those driver packages to your computer. They are cab-file
-packages.
6) Obtain 7-zip -utility, install it and with it unpack that cab-driver package on folder with its package-name.
7) On start of taskbar, right mouse button click Windows-Start and then select Hardware management. On
Hardware management -window open Display adapter -section, then mouse right click Microsoft adapter and select Update driver. Then on next window, select search driver from computer.
8) Browse on folder, where you unpacked ATI driver (on stage 6 earlier) and select Next ... that updates
driver, on the go and you don't need even to reboot Windows.
9) Now you have proper ATI Mobility Radeon -driver in use. It surely sets automatically resolution
according your laptop screen (so recommended native resolution of screen panel) or you can select that on diplay settings.
Extra: For that Windows 8.x/10 boot works fine too, do this too:
Seems that Windows 8.x (and Windows 10 too), with their hybrid-shutdown -functionality, require some support of the display adapter, that ATI Radeon Mobility x1000 -series don't have.
So the solution is to disable that Windows 8.x (or Windows 10) hybrid boot -functionality (that is quicker boot) and to use "normal boot".
You can fix that this way:
- at end of Taskbar click battery/power icon and select Power settings
- navigate to power and sleep settings
- either at bottom of those settings, or in Win10 more power settings, select power buttons functionality/settings (so what power button, sleep button or closing laptop screen does)
- at bottom of those settings is shutdown options (or with similar name). uncheck "use quick boot" -settings (for to uncheck that you may need to click first upper "changing disabled settings" (or similar name) at top or windows)
(I recommend to check Hibernate at the same time too, because that is usefull)
- then Save settings and reboot Windows and you have got rid of that problem that Windows 8.x/10 don't show Lock screen, now it does.
Boot takes just a little longer, so practically no problem. And if you need quicker boot with laptop, use Hibernate-state, so don't shut down your laptop, but instead put it into Hibernate-state (that is better than Sleep mode, because Hibernate-mode doesn't
consume battery-power, like Sleep-mode does)

Daylight savings patch - Treo 750 Windows Mobile

Sorry because I see so many items when I search and I just can't find what I need (i just spent an hour on the MS site as well and it kept giving me articles and not downloads.)
Can someone pls provide me the palm update link? I already did the Outlook update last year and thought that was it but I just noticed that my device is now an hour off between the 19th and maybe 26th. I also had to reset the clock on my handheld the day after because it did not change (my computer did, though so I think it is just the device that is 'off.')
thx in advance
Post relates to: Treo 750 (Cingular)

Click here for the Microsoft daylight savings time update page for your Treo.
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/daylight-savings-update.mspx
The links to the downloads from this page are in Blue and if you hover the mouse pointer over the Blue text, you will then be able to click and go to the download.
You will need to read through the article and follow the instructions for updating your Treo.
Click on the following link to the kb.palm.com webpage for the article regarding Daylight Saving Time Update for Windows Mobile.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=9314
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=treo&mn=750&cn=att
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

SDHC card does nor work on Satellite A200-1J0 with a clean Vista install

Greetings,
When I bought this notebook there was preinstalled Vista 32bit and as usual some Toshiba's drivers and software. As I remeber there was no problems with built in memory card reader, it was reading regular SD cards and also SDHC.
One day I had to reinstall operating system (without using recovery disc) and i've downloaded drivers for my notebook from official site, installed them and the card reader now it's not able to read SDHC cards. Is it just me?
This is what I installed for reader:
-Toshiba Value Added Package where is TOSHIBA Flash Cards inside of it
-Flashmedia Driver
-SD Utilities
I just want to highlight that there's no problem with reading mmc or normal sd cards.
My sdhc card is 100% working properly with other card readers.
Another sdhc card that I have is not working, it's just like I put nothing inside the reader.
Just nothing happens.
Is there anything else that I missed and this is the reason of my problem?
Any fix for Vista or something like that?

Dear Jeffrey,
My problem is solved, thank you so much! :)
This words were very helpful:
"Mostly an installation instruction is placed on the Toshiba European driver page which contains the essential installation order."
So I went on that site and found file where was written:
Contents and Installation order
for Windows Vista
INSTALL ORDER
WINDOWS VISTA
No. Component Name Version
1 Windows Vista RTM
2 Intel ICH7M Chipset Utility native
3 Intel 945GM Display Driver
or
3 nVIDIA G72MV-A3/NB7P-GS Display Driver
4 Realtek ALC861D Audio Driver
5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
6 Synaptics Touch Pad Driver (with LuxPad)
7 ALPS Touch Pad Driver
8 TI Multiple Digital Media Card Reader
9 TOSHIBA Software Modem
10 Intel Golan Wireless LAN Driver
11 Intel Kedron Wireless LAN Driver
12 Atheros Wireless LAN Driver
13 Chicony Camera Software
14 Bluetooth Stack for Windows by Toshiba
15 Bluetooth Monitor
16 TOSHIBA Value Added Package
17 TOSHIBA Flash Cards Support Utility
18 TOSHIBA Hardware Setup Utility
19 TOSHIBA Supervisor Password
20 TOSHIBA SD Memory Utilities
21 TOSHIBA ConfigFree
22 TOSHIBA Assist
23 TOSHIBA Speech System
24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
25 TOSHIBA Fingerprint Utility V5.6.0.3221
Thanks to that file I've found that I haven't installed "TI Multiple Digital Media Card Reader". In toshiba european download site there's nothing like that so nothing weird that I didn't find that before. Here google became a good companion and helped me to find that file. I just simply installed it without deinstaling previously installed drivers (just like is NOT written in install order above) and it's working :)
Thank you once again!
Best regards,
Davit

My HP Pavilion Elite m9058n PC's Card-Readers Stop Reading/Recognizing My SDHC Cards

Just about 2 weeks ago my HP Pavilion Elite m9058n PC's card readers stop reading or recognizing my memory cards used to store the pictures I took. They used to be able to read my SDHC cards (Sandisk, Kinston, Panasonic) before. Don't understand why they stop reading, even recognizing all of them. My O/S is Windows 8. The initial symptom was the options for processing the inserted cards seemed to be showing up slower than before and then I had to withdraw the cards and re-insert them so that such option screen appear. Then later on it didn't show up at all. And when I checked "This PC" ("computer" or "my computer" in other Windows versions), I didn't see the DRIVE LETTERS, like G, K, or J, etc. for the memory card readers any more. Now if I connect my camera directly with my PC, I see on the camera model number on "This PC" screen.
Please help me understand what this problem is and kindly provide me with the best solutions you can.
Thank you very much.

Hi,
I understand your card reader is not working as you have previously experienced. Take a look at the following document, Using and Troubleshooting Memory Card Readers (Windows 8), specifically the "Resolving issues with memory cards" section. Hopefully there will be something in there that is useful for you. Best of luck. Have a wonderful day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

Elements 9: Have lost ability to load in new photos from my SDHC card - "No program associated"

Folks
First post in this Forum, hope you can help!
When I insert my SDHC card, I no longer am able to import photos from the card into Elements. I get the AutoPlay window OK......
Auto Play -> Organize and Edit with Adobe Elements Organizer 9.0
however when I click t he Adobe Organizer link, I get:
"This program does not have a program associated with it for performing this action. Please install a program or associate an action .... "
It worked fine for the past 18 months! I upgraded to Elements 9 about 6 months ago, no issues until recently. I am guessing some WIndows update has broken this. Any suggestions? how can I fix?
(I am using a Dell Sudio 17 PC with Windows 7 64 bit installed). I have Adobe Elements 9 and Premiere Elements 9 installed (and not a lot else to be honest)
Many thanks!
Stephen

Hi
thanks again for replying. Sorry for taking a long time to get back to you, however I decided to reinstall. And I only just got time to do the reinstall
Unfort your suggestion didn't make it work! It just brought up the dialog automatically with the message ""This program does not have a program associated with it for performing this action. Please install a program or associate an action .... ""
Reinstalling didn't help either - which realy surprised me. I had expected that some program that had installed had disrupted the configuration somehow, that cause this failure message to occur. And I hoped that re-installation would correct this. However as I say the same behavior still happens, even after the reinstall
I have also tried to change jpg file association to Elements Organiser .... again no change. (This not what I want btw - I want elements photo uploader to be invoked when I insert the SDHC card - this is a different requirement from opening a JPEG direct into Elements)
So I think this is an Auto Play issue, not a file association issue.
I have tried changing the control panel defaul programs etc - however it all looks fine to me e.g. the default action for media insertion (memory card) is "Organize and Edit with Adobe Elements Organiser 9" - specifially under "Change Autoplay Setting" this item is shownb correctly. The issue (still) seems to be that the OS cannot map this to an actionable program.
As before, any solution/insight appreciated!
Thanks once again, 99jon, for your prompt responses and apologies for not getting back to you asap last time
Stephen

Sony SDHC card will not load video on Mac

Ok I have a new Sony SDHC card with video from a panasonic camera. On import it is not loading video and is just spinning on the SD import option of the window.

Ok I have a new Sony SDHC card with video from a panasonic camera. On import it is not loading video and is just spinning on the SD import option of the window.

Will bios boot from SDHC cards?

I'm trying to put an Arch Linux install on a 32GB SDHC card. I'm able to install the required files, but for whatever reason I can't get the SDHC card to show up in the boot menu, and UEFI doesn't seem to work. Of course, I haven't had any luck with UEFI booting on the W530 for some reason. I can get UEFI to work fine on my desktop, but no luck on the W530 from regular hard drives or my SDHC card.
Will the W530 recognize and boot from SDHC cards that have GRUB installed on them? So far I've had no luck with that. The card never shows up in the boot menu. I can't even get it to boot installer images. Booting from USB works just fine.
Solved!
Go to Solution.

The SDHC reader on thinkpads is attached to the PCI Bus. Makes for faster Read write, but kills booting from it.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

CLDC emulator is not showing windows mobile emulator as a registered device

Hi,
I want to run one J2ME application on windows mobile 6 emulator. I have done the setup using CLDC emulation on windows Mobile Emulator.
After doing installation of CLDC on emulator, need to register the emulator IP address in SDK. Done that using device-address.exe . Its done successfully.
Though device manager shows IP as its registered address, but emulator does not show the device emulator in its devices list.
emulator.exe -Xquery ------------> does not show windows mobile emulator it its devices list.
Can anyone please help for this. Without this am not able to run my J2ME application on windows mobile emulator.
FYI: I have installed MS Virtual PC but windows mobile 6 emulator is not binded to Virtual Machine Network Services Driver. Because, I am not getting this in drop-down list of adpaters.
I believe it will not make any effect.
Please help.

bkbooth11 wrote:
Hey,
I tried connecting my iPhone to a friends Mac and I wasn't able to see the photos in iPhoto either.
I have solved the problem though, well not me really, I found it in one of the other threads on here about not being able to see the iPhone on iPhoto.
Go through your Camera Roll and get rid of all the pictures in there that weren't taken with the iPhone camera, I had pictures in there that people had sent me via MMS and pictures that I had downloaded from e-mails. I e-mailed myself any important pictures and deleted the rest, leaving just all the photos I had taken with the iPhone camera. Connected to the computer and the iPhone is showing in My Computer again.
Hope this helps everyone here.
Thanks bkbooth11 I did as you suggested and that fixed the problem. Hopefully they will patch that soon as it is rather inconvenient.

Saving on Windows Mobile

Does anyone know of a program that will allow you to save "pdf" files on Windows mobile? I want to fill-out a form I created in Acrobat 9 and saved. Then fill it out on a Windows Mobile device and save the filled form. Reader 2.0 for Windows Mobile does not have a save feature. Thanks.

Hi
Well, a friend of mine has a Tecra S3 and he is very satisfied with this unit.
As far as I know this unit was delivered with Windows XP and all drivers are available for this unit. Toshiba designed drivers for common OS like W2k, XP.
If you want to use the especially tools and utilities so you should use this OS. Its a simply fact. Notebook technology is very different and tricky as a desktop PC. Of course you can use another OS but so you can not expect to use the special tools.
For example: the technology of notebook video graphic cards is not the same! Its very difficult to get the higher graphic performance without high temperature and overheating issues. In this case the Toshiba graphic driver has a overheating protection. Nvidia or other manufacturers drivers doesnt have this option because they designed drivers for desktop PCs not for notebooks.
Toshiba sells many different notebook models with different hardware compatibility. So if you are not able to find any drivers for this notebook so you should try to check drivers for other notebooks with the same hardware devices.
PS: About Toshiba contact:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=00000000a2
Regards

SDHC Card - Change the Order of Files

I been trying to find a solution, so far unsuccessfully, to try to force the alphabetization of files and folders on a FAT SDHC Card. The memory card is used in a portable music player and when I add new files to the card the newly addded files show up at the end of the previously added files and not in alphabetical order. The music player does not have a feature to force the files in alphabetical order. I know on Windows there are a couple of software solutions that will force the order of files, for example FATSort. Is there such a solution for the mac? Thanks

to try to force the alphabetization of files and folders on a FAT SDHC Card.
Files are sorted based on the column header you sort on.
Viewing in a window will not affect how the player sees them though.

"SDHC card cannot be ejected because FCP X is using it. Quit FCP X and try again".

Whenever I import AVCHD clips from my SDHC card (connected via a card reader) and then try to eject it I get this message.
Up to now I have simply quitted FCP X to eject it but there must be a quicker and more elegant solution?
How?

Incidentally I have read a suggestion to use the "eject" symbol/button in the camera import window but after using it the card remains stubbornly on the desktop and a further attempt to eject it normally or drag it to the trash brings up the dreaded warning message again.
I've even tried Disk Utility with the same lack of success.
OK, it only takes 20 seconds to relaunch FCP X but it should not be necessary.

WINDOWS MOBILE 5.0 SDHC card PATCH

Similar Messages

Maybe you are looking for