Storage unit types per storage type

Hello all,
i would like to know how to maintain/allow storage unit types per storage type. it would be much helpful if you could mention the SAP IMG path and the t-code.
thanks,
Maxx

Hi,
Goto SPRO --> Logistics Exection --> Warehouse Management --> Master data --> Define Storage type
In this node for your warehouse number and storage type combination activate the check box SUT check active.
Regards,
DilliB

Similar Messages

Storage location reference per Storage location

Hello Experts,
We have a storage location X000 and it has assign storage loc ref 00( GR to VZ1 ) therefore during the GR the storage loc S000 go through VZ1, before Schedule agreement is created with x000.
I require that in the same process the system go through EWJ and ETP for some materials and not go to VZ1. But the issue is that I cannot create several Storage location reference (00, 05,03) for the same storage location (X000)
I do not want create a storage location for each storage type.
My currently configuration is:
Storage location: x000
Storage location ref: 00 ( GR to VZ1)
Storage type: VZ1
Strategy source: VZ1 with ref 00
Material: WH 1 view VZ1
I require similar configuration for my news storage types EWJ, ETP but I require use the same storage location X000 it is possible? Or could you please recommend a idea..
reagards,

Hi,
If I understand correctly....you want three different material should putaway into three different storage type using same storage location reference...
It is possible. No need to create another storage location reference for the St.Locn: X000.
Assuming material A & B should go to storage type EWJ & ETP respectively.
1) Maintain storage type indicator for putaway in WM view1: Mat. A=EWJ, B=ETP
2) Maintain st. typ search strategy W/H no.,E,EWJ, st loc. Ref.=00,.st.typ=EWJ .Similarly for st.typ indicator ETP, 00,ETP.
When there will be stock putaway for Material A,B & C system will find the st.typ indicator for putaway from WM view and get storage location reference 00 (set for st locn:X000) and will search the appropriate storage type in storage type search strategy and putaway material into st. typ EWJ, ETP and VZ1.
Hope this will help.
Reg,
Sudhir

Storage unit type allowed per storage type

Hello all,
i would like to know how to maintain/allow storage unit types per storage type. it would be much helpful if you could mention the SAP IMG path and the t-code.
thanks,
Maxx

1)Storage unit type is assigned to the eacj warehouse number.
2)It is activated for each storage type in the warehouse.
3)Goto SPRO->LE->Warehouse mangmt->Mater Data->Material->Define storage unit type.
4)Here you assign storage unit type to warehouse number
5)You can activate SU mngmt at warehouse level here:
SPRO->LE->Warehouse mangmt->Storage Unit->Master Data->Activate SU mngmt per warehouse number
6)You can also activate SU mngmt at storage type level
SPRO->LE->Warehouse mangmt->Master Data->Define storage type.
Reward if helpful

Fixed "Default" Storage Bin per Storage Location

Hi all,
I have a Storage Location (1234) with only one Storage type (FIX) and one Storage Bin (FLOOR).
What I want is all materials should go (when receiving) to this Storage Bin.
I have configured the Putaway strategy for the Storage Type "F - Fixed bins"
But it's not working. The system is always considers the Next empty bin strategy.
I don't want to make the storage bin fixed per Movement type or per material...The same material can be maintained in different storage locations.
Thank you
Best regards,
Kifah Yacoub

Hi,
a storage location never has a storage type.
If you have a storage type and this has one one bin, why don't you use the strategy "Open storage". Then only that one bin is used. of course you need to allow "addition to stock" and "mixed storage" with all consequences.
If you used "fixed bins", you also have to assign the bin to all the materials.
Brgds
Juergen

WM-storage unit number issue

Hi
Storage unit number is not generate in the transfer order .i made configuration for storage unit. But storage unit number is not
trigger in transfer order.
pls send me steps for configuratioin. ihave to check where i missed the configuration steps
with regards
dinesh
Edited by: code acess on Aug 18, 2011 5:25 AM

Hi ,
follow the below Process to Activate SU
First make your warehouse SUM active. Set your individual st types as SUM active and SUT check active
Active SUM for the storage types where material is to be putaway as well as removal, Storage unit configuration in LE -WM-Storage units- for master data. Maintain these storage types in storage type search to find the bins for putway & picking.
When you post GR in IM and the System will create the Transfer requirement .
Using The TR to converting into TO creating to the destination Storage unit bin.

2-step picking vs storage unit

Dear All,
We'd like to use '2-step picking' for production supply and we use 'storage units' (pallets) in our WH.
There might be different sorts of goods (with different part numbers) on one pallet.
The problem is, that during '2-step picking' the system wants to deliver the whole storage unit from the storage bin to the interim storage bin.
Is it possible to 'break' the SU and pick only the necessary item (and necessary qty)?
(e.g.
There are materialA, materialB, materialC on palletA. I need only materialB for production, but the system wants to move the whole pallet with materialA&B&C.)
Thanks for your help.
BR
Csaba

Hi,
I'm not sure your scenario is viable in (standard) SAP.
As I understand (e.g.):
- source storage type: productA 10 pc, productB 20 pcs, productC 30 pc
- intermediate storage type: SU1 (productA 2 pc, productB 17 pcs, productC 10 pc), SU2 (productA 8 pc, productB 3 pcs, productC 20 pc)
- destination storage type: bin1: productA 2 pc, productB 17 pcs, productC 10 pc, bin2: productA 8 pc, productB 3 pcs, productC 20 pc
Please notice that SAP determines the to be removed quantities (~corresponding to SU1 & SU2 but not as SUs) when you remove the goods from the intermediate storage type ("allocation") and not when you place the goods into it.
Please also notice that automatically you cannot create storage units (palletize) with different products on it (I'm not sure this is requirement in your case or not).
Please check this link where it is explained where to carry out customizing for 2-step picking and how it works:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f842674afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba
Edited by: Csaba Szommer on Aug 6, 2009 7:01 AM

Storage unit not disapperar from WM warehouse

hI Guru's.
I' ve created and confirmed a TO's correctly.
These TO's are to change stock between warehouses.
The problem is that the storage unit not dissapear from source warehouse and the TO is correctly confirmed.
Anyone can help me??
thanks a lot.
Ismael

If you don't want to see the SUN in receipting warehouse, you have to deacitvate the "SU MANAGEMENT ACTIVE" in the following configuration.
SPRO>LE>WM>Storage Units>Master Data>Activate storage unit Management Per warehoue Number,
Choose the receipting warehouse number and de-activate the check box.
Let me know, how it goes.

External Storage units to be entered in the Creation of Transfer Order

Hi Experts,
We have a scenerio where the business creates the Storage units in advance, creates the PO and assigns ithe SU's to the Purchase Order in the custom table. Then creates the Goods reciept using a BAPI which creates a Transfer requirement. Now while creating the Transfer Order for this material document ,
The main issue here is that the businedd needs that if there are any number of Storage units in the Custom table say 3 SU's then the 3 SU's should be entered in the Transfer Order which is created in the bcakground using a BAPI.
please guide us how todo it
Thanks in advance

Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri

Storage unit number length

Hello friends,
I'm about to activating handling unit management for a newly cutsomized warehouse. hu numbers are 20 characters.
except this new one, all other warehouses defined in the client are storage unit managed and storage unit number length was set to 10.
so this is being a problem, when I packaged the stock in hu02. I need to change su number length from 10 to 20 but system says "this will cause serious result"..
Is anybody experienced this before? what is the possible result? or what kind of problems happens in my warehouses?
I d be glad if someone shares his/her ideas/experiences with me.
thanx in advance.

Hi,
May I know if the question still exists or not? If so, please reply it. Thanks a lot.
BR

Storage Unit number in SAP is showing on SAP but user getting invalid trans

Regarding the Storage unit TS0C230037 issue.
Checked storage unit TS0C230037 in the transaction LS33 & Table LEIN. This storage unit doesn't exists in Transaction data as well as table entry level
Currently I couldn't even see the storage unit in system.
Note: I could see this Storage unit TS0C230037 in LX03 Transaction code. But when I double click on the storage unit it says Storage unit TS0C230037 cannot be displayed.
Customer want move the available 4 Qty stock from that storage unit to other storage unit.
Kindly advise.

Awesome, gr8.
Thank you Kiran.
But, not sure ,
1) How did you figure it out that this (just 4 fields) is bcz of UI Guideline app param?
2) If so, how do you know GL11 will fix it?
3) how do you know we are having GL20 in place, bcz in the below sap help link sap said GL11 is the default?
4) In which component SAP hard coded as 4?
5) Pls. let us know what are other params we need to check/test for our custom app?
Application Parameters and URL Parameters - Web Dynpro ABAP - SAP Library
Thank you

How many storage unit type per Material code

Dear ERP Expert
we are running SAP ECC 6.0 with decentralized Warehouse Management System (WHP).
In material master data of WHP, view Warehouse Mgmt 2, there is the "Palletization data" box, with the following column:
Loading equipment quantity 1
Unit of measure for loading equipment quantity 1
1st storage unit type
In this way it is possible to define, per material code, 3 different pallet type, isnt'it?
I would like to know: To define different pallet types what kind of the impact could have?
I mean, someone tell us that the main impact to define different pallet types, in WH material master data is:
1 - When receiving the goods the TOu2019s will have to be created manually. The system cannot define the used pallet by itself and this is very important for the placement.
2 - The issuing of the goods is not possible via RF (radio frequency). This will have to be done manually as this is not supported.
is this scenario relalistic or is it possible to do something in order to avoid this scenario?
regards
marco

1)Storage unit type is assigned to the eacj warehouse number.
2)It is activated for each storage type in the warehouse.
3)Goto SPRO->LE->Warehouse mangmt->Mater Data->Material->Define storage unit type.
4)Here you assign storage unit type to warehouse number
5)You can activate SU mngmt at warehouse level here:
SPRO->LE->Warehouse mangmt->Storage Unit->Master Data->Activate SU mngmt per warehouse number
6)You can also activate SU mngmt at storage type level
SPRO->LE->Warehouse mangmt->Master Data->Define storage type.
Reward if helpful

Split transfer order on the basis of Storage Unit type(SUT)

Hi,
I got one problem and want the solution for that immediately.the problem is as follows:-
The transfer Order needs to be split by quantity according to the quantity per Storage Unit Type.
I have to do this making chages in the SAP standard user Exit EXIT_SAPLL03A_12 in the program SAPML03T.
Eg.One scenario is provided
Scenario 1: Perform transaction MIGO with a movement type 101 for Outbound Delivery 80000201. Enter a quantity of 15 kgs.
the result should be as follows:
Scenario 1: Check TOs created by going to transaction LT22. Enter Warehouse number 200; Storage type 902. Select the Dynamic Selections button and select Transfer order Item. Double click on Material and enter the material number (W075006). The SUT is 5kg so the expected result is for 3 TOs to have been created.
Means one TO got splitted in 3 TOs.
Please provide me the help.

Hi Vinay,
This can be done purely through customizing. Please check IMG -> Logistics Execution -> Warehouse Management -> Activities -> Transfers -> Processing Performance Data/Split. You will need to define a sorting profile for TO split in where LETYP (storage unit type) can be used as sorting condition. The sorting profile should then be assigned to defined TO split.
Hope it helps.
Have a nice weekend!

WM Storage Unit Type Capacity

Hi,
I have the following situation:
In our warehouse, materials are received in kilograms and stored and transferred in barrels or containers.
For this reason we are using storage unit types "barrel" and "container".
For the barrels, we have a defined bin structure. Containers are stored in one large area with no restrictions to the number of containers.
For barrel storage we use placement strategy P (palletization). This because a maximum of 4 barrels can be placed in a bin. We created 4 bin sections per bin to hold the maximum of 4 storage units.
My question is this:
To check if a storage unit can be placed in a bin works fine. A maximum of 4 barrels is allowed in a barrel bin.
However, when converting a TR to a TO i want to check the entered quantity PER storage unit type.
For a barrel, a maximum of 250 kilograms is allowed. For containers, a maximum of 1500 kilograms is allowed. Material can be stored in barrels, as well as in containers.
How do i let the system check the allowed maximum quantity per storage unit type?
Thanks in advance,
Paul

Hi Paul
I can see why it is failing now.
For a storage type with Palletization strategy, it considers the capacity per bin and not per section. Therefore it will allow you to putaway 750KG in a single section of the bin (250 used by SUT totaling 1000 for the bin).
Your requirement is capacity check per SUT with a set maximum material quantity.
A different way of handling this is using capacity check method 2 for the storage type.
Then update your material master data (WM2 view) with Palletization data.
250 KG <Barrel SUT>
No update to storage bin masters is required.
A drawback of this strategy is you can work only with the one SUT for a material. System will not take in to consideration any data given in line 2 or 3 in Palletization Data. In other words you cannot restrict the max quantity for Containers for the same material.
Perhaps depending on the storage type characteristics of your container store, we may make some work around.
Let me know if you wish to discuss more.
Regards
Baseer

Stock Type Changes for Storage Unit Mgt.

Hello,
I am looking to develop an R3 system program (in ABAP) which based on certain criteria can change a storage unit's stock type between unrestricted, quality, and blocked. I know there is a BAPI, 'BAPI_GOODSMVT_CREATE', which can be used to do the Posting Change in IM and there are function modules, L_TO_CREATE_SINGLE, etc, which can be used to create/confirm transfer orders for the storage unit in WM, but I was hoping someone can provide guidance on how I could make this simpler. Is there a one-step method I can use to combine the movements for IM and WM (either programatically or through configuration). Any help would be greatly appreciated.

Hello Allen,
Thanks for detailed explaination,
Here is the one BAdi available to meet your requirement ( SPRO-> Log Exe -> Warehouse management -> System Modification -> BAdi in WM -> Badi for Quant determination)
<b>Business Add-In for Quant Determination</b>
Application components: LE-WM, LE-WM-TFM
<b>Use of this component</b>
You can use the BAdI LE_WM_LE_QUANT in the Warehouse Management system (WMS) to influence quant selection for a posting change notice after the system has determined all of the quants that correspond to the specifications in the posting change notice.
if the system has determined more quants than are necessary for processing the posting change notice, you can restrict the quant selection further, so that you can process the posting change notice in the background.
Hope this will be helpful
regards,
Arif Mansuri
Reward if answer is helpful.

Storage unit type not found automatically on LT01

Hi,
We have just only one kind of storage unit type in the settings. I want it to be determined automatically on TO creation(LT01) , so that the user is not required to enter it everytime he creates a TO
I couldnt find a way to do it via custimizing. Appreciate any tips about it.
Thanks
Cihan Polat

Hi,
I dont have a problem with storage type determination.
Acctually what is missing on LT01 is storage type indicator LTAP-LETYP (EXP for my example).
This is the field on the second screen of LT01 (SAPML03T- 102).
It is located under quantity, which is just second line on the screen.
Requested qty    1                 PC   5SQ2 370-0KA06 /N-OTM.C6 3pol
Stor. unit type      EXP                   Material        5SQ23700KA06
Certificate no.                         Plant/Stor.loc. 1000   1550
Confirm
Printer                                 Stock category
GR date          12.04.2010             Special stock
                                        TO item         0
Tpe Sec Stor.bin    Target quantity   AUn
Src                                         0 PC
Dest                                        0 PC
Ret.                                        0 PC
Goods recipient                         Weight                   0,000

Storage unit types per storage type

Similar Messages

Maybe you are looking for