Strange crash with Intel FFT in Windows XP x64: only when first starting LabVIEW and opening VI, not when opening VI by double-clicking
When I use the Intel FFT libraries(MKL), I seem to have a strange crash whenever I start allocating the Intel DFTI descriptors. I call a DLL from LabVIEW 8.2.1, in which these functions are used. I am working on Windows XP x64. This seems like a bug which was present in these libraries, but I got the libraries where the bug was resolved.
The strange things is that, when I open LabVIEW and then open the VI, LabVIEW crashes from the moment I allocate an Intel Dfti descriptor. But when I just double-click the VI and open it this way, I can run the VI without a crash! I already removed the DLLs in \Program Files (x86)\National Instruments\Shared\MKL\MKL70 to see if they were the cause. But even without them, I still get the crash.
I know there was a strange crash in the previous version of Intel MKL when calling a DLL and allocating this type of descriptor, so it seems like somewhere LabVIEW still uses old versions of some of these DLLs. But even then, can this explain the difference in behaviour between opening the VI through LabVIEW or directly? And if so, were could I find these DLLs? I've already searched from them everywhere.
Update:
- Opening the single VIs directly by double-clicking indeed solves the crash: from then on I can run all VIs using the libraries without any problem. So LabVIEW must do something strange when it is opened.
- Linking my DLLs statically against the Intel libraries ALSO solves the prolbem. So this seems to indicate LabVIEW loads some dynamic library which screws up everything. But only on x64 systems . This bloats my DLL, but currently I do not see another work-around.
Anyone has any more ideas? Otherwise I can always submit some test case to LabVIEW support.
Similar Messages
-
I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user. Please help.
This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
· Is the computer on a domain?
· Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed." -
I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???
Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR -
Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening! Help!
Hi Monika,
I have spent the last two or three days trying to do what you suggested. I uninstalled Adobe 6 from Windows. Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs. I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool. I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat. Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number. After two hours I had nothing but instructions to wait another 20 minutes for a case number.
Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed. I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner. The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me. Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
Would appreciate any help you experts can offer. If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
Exhausted and still desperately in need of help... -
Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1
It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please
I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.
Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS. -
how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one., how do i stop the icloud window from poping up everytime i start iTunes ? i do not have an icloud account and don't want one.
If you don't have an icloud account, then icloud is not the thing that's popping up a window.
If you are being asked to enter a password when accessing itunes, then the problem may be that you have purchased items (apps, songs, etc) on the device that were purchased using a different itunes account than the one you currently have defined on your device.
Purchased items are forever associated with the itunes account (the apple ID) that was used to make the purchase. If you change the ID on the device, you won't be able to update any of them. You'll have to purchase them again. -
I'm trying to install Adobe CC on the 2nd computer, a Macbook and after downloading the CC desktop app I double click to intall. When it looks to be done installing I go to double-click on the ourobouros icon at the top and I am rewarded with the spinning beach all of death. Any suggestions?
Hi,
Please refer to the help document below to fix the issue:
App doesn't open | Progress wheel spins continually
Regards,
Sheena -
After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad which is my working tool.
What should I do?Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?
-
I bought 2 ebooks from Ebay in 2013 and already read it with ADE, but now I got a new PC, downloaded ADE again and am now not able to open the two acsm-ebooks any more
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.
Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason -
No setup screen when first starting apple TV
Hey Docbarb2,
You should be able to change the language by either restoring your Apple TV with iTunes or change the language by following the steps in the second article. Take a look at the article below for more information to either get you back to square one or to at least a language that you know.
Apple TV (2nd and 3rd generation): Restoring your Apple TV
https://support.apple.com/en-us/HT202118
Change the language on your Apple TV
https://support.apple.com/en-us/HT202799
Take care,
-Norm G. -
I just recently purchase an ipad with retina display it is also my first apply product and I am not liking it. First it won't stay connected to my wifi and it won't pair on my nokia N8 phone via bluetooth. Any suggestion? Thanks!
No one from Apple here - this is a user-to-user forum for the Apple Thunderbolt Display. If you don't like your iPad, sell it.
If you want to ask questions about your iPad, go to the iPad community forum.
Clinton -
Closed a window on final cut and i can not re open it
closed a window on final cut and i can not re open it. i tryed many things. i went to window and it wouldn't let me select it (timeline). what do i do? help asap!
Locate a Sequence in the Browser (not a clip or an image, but a Sequence) and double-click it.
-DH -
Constant crashing with Flash CC in Windows 8.1
Hello I am an avid Flash user who has worked in the program for roughly 10 years since before it was bought by Adobe and called Macromedia MX5. This most recent version of Flash CC is incredibly buggy with respect to the following areas..
I am constantly suffering crashes in Flash on my windows 8.1 desktop computer. The tower I have is more than capable to handle Flash CC so I don't understand why it is crashing. This isn't happening with even heavier hitting software such as After Effects only Flash CC.
I especially notice crashes and stalling when saving as well as when scrubbing or playing in the timeline or trying to clear key frames or adjust keyframes in any manner.
Additionally I have noticed more substantial problems and flaws with Flash CC in comparison to previous versions. This is evident most in the audio options. I think a lot of the problems that stem from audio playback and lagging playback time is the fact that audio is defaulting to a repeat function of 1x when it should default to no repeat function. Sometimes changing repeat to 0 resolves this issue but even still audio always seems to start from beginning of the clip/sound file as opposed to playhead despite having stream selected. This was never a probelm in previous versions of Flash for me, EVER. I don't understand how this has become a problem now all of a sudden when this version of Flash is supposed to be running 64bit as opposed to 32bit.
I also noticed that the audio on some files has ceased to work when I revisit the file later on. It will not play no matter what in the stage/timeline but is audible when I do a test movie or export movie.
Is anyone else having similar issues here? I didn't seem to have so many problems when I was using Flash CS6, this audio thing is probably my biggest beef though I can't say I'm too fond of the crashing either.first try resetting your preferences by holding down shift-ctrl-alt while starting flash pro. you'll see a confirmation dialog if done correctly.
if that fails, uninstall and then reinstall flash pro.
if that fails, uninstall, clean and then reinstall flash pro following these steps exactly, http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Maybe you are looking for
-
How to insert a Jquery slideshow to a template based html page?
I would like to insert a simple jquery slideshow into an existing div in an html page which is linked to a template page. Do I add the js files and code to the template html or the child html where I want the slideshow? Do I need to divorce the page
-
Installing xp with an external dvd cd drive
My intel imac internal cd drive has stopped working and is too expensive to repair. I have just purchased an lg gp08 external drive to replace it. I have OSX 10.5.6, I have successfully used Boot Camp Assistant to create a boot camp partition. When B
-
Error while installing sap nw 2004 trial version
hai, u r trying to install in graphical mode , try to install in console or sielnt flag. this is the error i am getting while running setup. shan.
-
How to insert .swf video into html & mute onclick
I have a .swf file - a 20 sec vid with no player controls, just the video - made by someone else, so this is the only file type I have and can't seem to edit it. Any way to insert the .swf, and be able to mute the video? It's being used as a banner-t
-
Programmatic access to multiple backend systems using adaptive RFC
Hello, The following link http://help.sap.com/saphelp_nw04/helpdata/en/af/84a34098022a54e10000000a1550b0/content.htm talks about the support to map multiple backend systems by specifying the backend system as URL parameters in a webdynpro applicatio