Strange display of query components in the report
hey,
when I create a query and execute the report, there are always these empty lines (sometimes 4 or so) between characteristics, key figures and free characteristics.
Maybe it's important to tell you that I am using external hierarchies and variables in the querry definition.
How get ride of those empty lines?
Cheers
Sabine
Hi Sabine,
It is normal to have one free line / empty row between the free chars and filter cells and the result area. Now when you execute the query for the first time, there is one row. If you go to edit the query (without closing the workbook) and then re-execute the query, you will see the extra lines coming in, and it corresponds to as many times you go to change the query and reexecute it. To avoid this, just close the workbook and then reexecute the query.
Hope this helps...
Similar Messages
-
How to display dynamic header title in the report?
I have a req to display dynamic header title in the report.
When a id is entered in the prompt text, it will display the user data based on that user_id.
so similarly....the header title should vary each time when you select different user_id.
How can we implement this?>
Zack H wrote:
> Lazaro,
>
> It depends on what you want displayed in the heading for each id.
> Please elaborate.
>
> Thanks,
> Zack H.
Zack..I have several projects listed under several project id's...
so when a user selects project id 00164 then it should display something like "Project document for Jon Doe"
again when the user selects project id as 00192 then it should display something like "project document for Zimmerman"
Did you get it?? -
Cannot build the query or generate the report. WIS 30351
I am trying to create a docuemtn using SDK. I have created a document and when I try to add dataprovider and update the document, I am facing the below error
Cannot build the query or generate the report. WIS 30351
http://help.sap.com/saphelpiis_sbo41sp5wi-sdk/frameset.htm?ec5645bc6fdb101497906a7cb0e91070.html
Any help would be appreciated...Hi Pirabu,
here's the required steps for what you described:
1. Create a new report in folder with ID 12345:
POST ../raylight/v1/documents
request body:
<document>
<name>My New Doc</name>
<folderId>12345</folderId>
</document>
response:
<success>
<message>The resource of type "Document" with identifier "54321" has been successfully created.</message>
<id>54321</id>
</success>
2. use the new document ID when adding a data provider (ie universe ID is 5543)
POST ../raylight/v1/documents/54321/dataproviders
request body:
<dataprovider>
<name>Query 1</name>
<dataSourceId>5543</dataSourceId>
</dataprovider>
response:
<success>
<message>The resource of type "Data provider" with identifier "DP0" has been successfully created.</message>
<id>DP0</id>
</success>
If you are doing something different, please provide the steps you are using and the type of datasource you are adding (unv, unx, Bex query etc).
Is the error when adding the data provider, or do you have an additional step updating the document?
Also, what version of BI4 are you working with?
Dan -
Cannot build the query or generate the report - BI4.0 Dashboard on WebService Error
Hello All,
I am trying to create a Dashboard with WebService connections in SAP BI4.0 SP04. While running the dashboard I am receiving the error, Cannot build the query or generate the report. I have already set the refresh parameter to TRUE (bound to an excel cell and I have tried with 1 also). Back end WebI Reports of the BIWS connections are created from BEx queries through BICS connection. I have two prompts to run the Web Service and the report. Please share your thoughts regarding this.
Thanks and Regards,
Debajyoti DanHi All,
I have found the issue. The problem is coming only when I am receiving prompts from BEx query and trying to use them through dashboard. I replaced these BEx prompts with the same in WebI report. Then the entire functionality started working correctly from dashboard.
But, this is only a work around and can not be applied at all times. So I have raised a message for the same to SAP. I will update the thread based on what I receive from SAP Support. -
How can I display a formula variable in the report?
Hi,
I have a requirement to display a formula variable value in the report. When the user runs a report this variable value should be called once and displayed below the report title or in a specified cell. Is it possible something like this could be done? if yes, can someone tell me how can I achieve this functionality. I appreciate your time and effort with points.
Thanks,
Rao.Hi Bhanu,
In the query properties you can only see text variables and not the formula variables. If I define my number of working days as text variable and I can display in the report. However, I need to use this variable in some calculation in the report, so it has to be formula variable in order to use in calculations. I appreciate your input with points.
Thanks,
Rao. -
In DBI , how to find out the Source Query used for the Report
Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj ShrivastavaHi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu -
Keyfigure display attribute not visible in the report
Hi,
I am facing a problem. I have <b>keyfigures as display attributes</b> in my master infoobject. Earlier I was able to see those <b>display keyfigure attributes</b> in my query and was able to use them in it. After that, few changes were done to the master infoobject (addition of few attributes and deletion of few - but none of them were what I was using). Now after the change, when I open the query in design mode, it gives me error saying that it can't access those attributes (only keyfigure display attributes) and repairs the query (removes those attributes). All the other attributes are visible.
I have already tried rsrv for the master infoobject (corrected the error) and rsrt for the query. After that also it doesn't solve the problem.
What could be the reason? Any pointers would be highly appreciated.
Thanks,
SaketHi,
Display keyfigure attributes are visible in the reports because I was using and running them in the reports before the change in that particular master infoobject. Only, keyfigures maintained as attributes can't be made navigational (hence can't be used for drilldown). Its only after the change, there is this error.
I had also checked the authorization for Keyfigure earlier, which I have. Therefore its not the problem.
Thanks for the help anyways! Any more pointers? Btw, I am working on BW3.5.
Thanks,
Saket -
To Display Space as Zero in the report output
Hi ,
We have a situation like there is no record in the cube for a particular date selection , the output in the report for the date shows as Space , now the question is how do we display Space as Zero in the query ouput.
We have the option to Display Zeroes as spaces .
Please help..
Thanks,
Sruthi...Hi Sruthi,
Can you try this.
Create Formula for each KF. In the formula definition just add key figure (Ex: if the keyfigure is KF1 then in the formula just drag KF1) and save it. Name this formula as your original keyfigure. Formula may return 0, if the keyfigure doesnt have any data.
Hope this helps.
Veerendra. -
Values not getting displayed from first page of the report.
Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.what reporting tool?
Interactive Reporting
Financial Reporting -
Displaying No. of Days in the report???
Hi All,
I have to display the number of the day the report is executed on. I thought that I can do it using the Text Variable and Offsets in it to display the day from the input date. But the problem is, the customer wants to display the number of working days so far and not the day of the input date i.e if we run the report today i.e 09.11.2006 the the number of the day would be 7(taking off saturday and sunday).
Has anyone got any solution to this?
Best Rgds,
James.Hi,
you can use the factory calendar to calculate only working days. That wil let you count only the working days and not Saturday, Sunday or holidays.
Kin dregards
/martin -
How to Display Mutiple CostCentre Hierarchies in the Report
Hi Team,
As we have multiple Hierarchy groups defined in R/3 for Cost Centres, I would like reflect he CC values in the CC report where it is showing the default Hierarchy (only) whereas others are appearing in NotAssigned, is there a way to handle the system to display all Hierarchies listed in the 'Restrictions' more than one Hierarchy.
your expert adivse is highly appreciated.
Thanks in Advance, BR.Gentlemen any luck..!
-
Displays only 500 rows on the Reports
Hello All,
We recently upgraded from 10g to 11.1.1.6.0 and I am running in to a issue with one of the report. When I run a report, it displays only 500 rows of data but not all the records. Could someone let me knoe which field should we change in the instanceconfig file to resolve this issue
ThanksCheck these
http://docs.oracle.com/cd/E25178_01/bi.1111/e10541/answersconfigset.htm#CIHJGAAH
http://www.clearpeaks.com/blog/oracle-bi-ee/%E2%80%9Cmaximum-total-number-of-cells-in-pivot-table-exceeded%E2%80%9D-error
Pls mark if helps -
This happens after we upgraded from 11.1.1.2.
The reports have not been changed after the upgrade.Had the exact v11113 issue with 2003, so it forced people to move to ver2007 xls.
Attempted to change settings in IE, but did not get far, users got FR further in 2007.
Bug was noted in previous forum. -
Steps of abap query--- to get the reports
steps of abap query -
to get the reportsHi Deva,
For step by step procedure to create an ABAP query you can refer to the following links
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
http://allaboutsap.blogspot.com/2007/09/sap-query-step-by-step.html -
How to display a table name in the report
Hi,
I have a requirment about the display of pivot table. When we drag a column to see its result, we always see his column name, now what I want to show are both table name and column name..
like:
District_D
Region District
China Beijing
India Chennai
Regards,
Anne
Edited by: anne on Oct 25, 2011 2:39 AMHi Anne,
If you want to implement Dpka's solution (hardcoding table and column values in column heading and add line break in between), you will need to add the below entry in instanceconfig.xml file. Refer http://gerardnico.com/wiki/dat/obiee/hardenxss
<HardenXSS>false</HardenXSS>
This will enable the HTML elements to be treated as HTML and not plain text. After adding the above entry in the xml, restart your presentation services and test your solution.
Thanks
Maybe you are looking for
-
My iPhone 5s with iOS 7.1 become very hot when charged almost reach 100 % and will shut down itself. Then I need to off the power and let it cool down first before I can on the phone back. Please help me to solve this problem. Thanks.
-
Hi My requirement is System have to check whether there is duplication material number on sales document (warning message). Solution provided like this Enhancement will be developed: Use user exit MV45AFZZ on 'Save document prepare routine'. Ignore i
-
Which slot should i install my X-Fi
I'm about to change my motherboard soon to a Gigabyte GA-965P-DS3 rev 3.3. Which slot on that board doesn't share its IRQ with other devices, or in other words, which slot is the safest to install the soundcard in (to avoid potential resource conflic
-
A little bit ago I tried ripping some cd's using wmp0. I tried ripping them into mp3s but it said that I do not have an mp3 encoder installed on the computer. However I have creative mediasource installed which can rip cds to mp3 files (the converter
-
How do people handling java based systems when it comes to the transaction tab in Solution Manager? Should I just use the Long URL for the screen that is being configured? Any insight would be helpful.