Strange issue in ListBox - Showing the 'id' contents and not from 'Values'.

Hi,
I have created a custom table control that looks exactly like in 'Partner Tab' of Sales Order. It has Partner type, Partner, Name etc columns. For 'Partner type' column, I am calling function module 'VRM_SET_VALUES' so it shows as 'Sold-to party' , Ship-to Party' instead of SP, WE etc. This works fine.
However, before I display this table control, in PBO, I am populating Partner Type and partner # and passing it to table control columns. It should show like 'Sold-To party' in 'Partner type' column and '0000014' in 'Partner' column. I see Partner # populated correctly, however, instead of showing 'Sold-To party' in 'Partner type' column , it is showing like SP, which is the 'id' value from function module 'VRM_SET_VALUES' . What should I do so it shows the description(content from 'Values' and
not from 'id' ) ?
Niranjan

Thanks for the response.
I had tried converting to text and pass from Internal table to Table control on screen in PBO, however, the width of the column is only 2 characters, so it will display just 2 characters text.
I am wondering how SAP is able to code to show TEXT in 'Partner tab' in Sales Order. I have pasted the contents below from 'Partner tab' of sales order. I debugged the code in program SAPLV09C and screen 1000 and somehow they are populating the text as shown in 'PARTNER FUNCTION' below instead of codes like SH, SP. If I press F1 on field, I see SDPARTNERLIST-PARVW as the field name and the width is 2 characters.
PARTNER FUNCTION        PARTNER #      NAME
Sold-to party                         79269     XYZ CONSTRUCTION
Foreman1                          2023     KURT
Bill-to party                          79269     XYZ CONSTRUCTION
Payer                          79269     XYZ CONSTRUCTION
Regional Salesman            430     MARK
Ship-to party                          219763     S.A.G. PROPERTIES
Cont Person >Bill-To     80296     DENNIS
Cont Person >Sold-To     80296     DENNIS
Cont Person >Payer     80296     DENNIS
Cont Person >Ship-To     261628     DENNIS

Similar Messages

How to show the break totals and NOT the report totals in an SQL report

APEX 4.0.1
In an normal SQL report (Not interactive) with a break applied on the first column, how do you just show the break totals and NOT the extra full report totals?
Next, Is it possible to display only some of the row totals and not for all columns that have the sum option checked against them?
PaulP

PaulP wrote:
APEX 4.0.1
In an normal SQL report (Not interactive) with a break applied on the first column, how do you just show the break totals and NOT the extra full report totals?Instead of using the APEX break feature, try doing all of this in the query using <tt>GROUPING SETS</tt> or <tt>ROLLUP</tt> to get the break rows, and <tt>GROUPING_ID</tt> in the <tt>HAVING</tt> clause to suppress the unwanted rows.
Next, Is it possible to display only some of the row totals and not for all columns that have the sum option checked against them?Don't really understand what's meant here?

HT4623 How do I get the calendar to show the whole month and not just the day or week.

How do I get the calendar on my updated i phone 7 to show the whole month and not just the week or the day?

Touch the arrow (or word) at upper left (e.g. September).

After creating a form from an existing document, viewing it in Adobe Reader for Android only shows the form fields, and not the document behind it.

Using an existing PDF file to create an editable form that I can update on my tablet as I go, but when I open the file on my tablet (using Adobe Reader for Android), it only shows the blue editable fields that I've created, but not the actual form that's supposed to be behind it. However, it views properly on my PC. Am I not saving it out correctly?

Please share the sample file with me. I am sending you instruction via private message.
Regards,
Anoop

How can I set up printing to queues on a Windows 2008 server directly from the iPad apps and not from third-party applications without using AppleTalk or Bonjour?

We have a Windows 2003/2008 server-based network with a dedicated print server which we would like to be able to print to over Wi-Fi. How can I set up the printers on the iPad without downloading a third party application such as Print Central or Print N Share? I want to just click the arrow and "Print" then choose the printer, which doesnt show up. I want to be able to use the existing TCP/IP-based network that we have to reach these queues, not having to install Bonjour or AppleTalk to reach them.
Thanks,
KMQ7

This would really be the "Holy Grail" right now. I think this a feature that every large organization requires. AirPrint works on a small scale, but is not really an enterprise class application. In addition it uses the Bonjour discovery process which is difficult in a large LAN WAN environment. For those that would remind me, I am aware of the enhancement link

Starting a WSAD server from the command prompt and not from the IDE UI

Hi,
is there a way to run the WSAD server from the command prompt instead of using the IDE UI . i have tried starting the server from the Directory i have installed WSAD " D:\Program Files\IBM\WebsphereStudio\runtimes\base_v5\bin>startServer.bat" but it gives the Following error " The system cannot find the path specified." i am working . do i have to specify the workspace that i am currently working on

to see if the network adapter has registered with OPMN run: opmnctl status
the 6200 message is a timeout which can be set in opmn.xml, the reports server(s) and other processes managed by OPMN should still stop.
Try opmnctl stopall or opmnctl shutdown
Does the timeout shows up regularly ie can you repeat it?
After the stopall or shutdown try to start everything up again and try to stop the single reports server process again.

UILoader issue-different sources, but the same content appears.Why?

Hi,
It is strange, I have tested a couple times in different ways but can't figure out why this happens. I will try to brake it down to be clear as I can:
I have picked up a uiLoader component, and copy-pasted four times, so now I got five of them in my flash movie. Each got a different source (dresses/dresses1.swf, dresses/dresses2.swf, dresses/dresses3.swf, dresses/dresses4.swf, dresses/dresses5.swf). But When I launch the movie, all the 5 uiLoaders display the same content: dresses/dresses2.swf, and I can't understand why. For a test, I have replaced the .swf file with some jpeg files, and they were ok, but as I put the swf files back they show the same content again.
The sources are ok, they work perfectly separately, so I can't figure out what is the reason why the swf files are loaded incorrectly..
Please help,
ved

Thanks man for the reply, after a break I have revisited the code while composing a message for u, and I have found the bug...
Thanks!:)

Apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

apple loops for garageband pack doesn't show the folder content (loops, files...) in ableton live suite 8 library browser, but I can see all the loops in the folder from finder. how can i fix this? help please.

Thanks Barney, I tried that but all that comes up in Spotlight are the log files that show the file paths! I don't know how Steam works. Are all the files held by Steam on their server perhaps?

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
To get all your content off your connect your iPad to your new computer.
Then use a 3rd party piece of software to transfer your content
I have found Senuti useful but there are others listed in the article I linked to in a previous post.
https://discussions.apple.com/docs/DOC-3991
That will let you transfer your non purchased content
For Purchased content log in to iTunes on the new computer
In Itunes Store click on Purchased under the Quick Links section on the right.
Download any music by clicking on the cloud button

Hp co-ouder starts up shows the hp logo and then it says monitor is going to sleep

hi guys
i have this hp computer for like almost a year and i really enjoy it but for some weird reason the next day my pc did something strange when i click the power button it goes on and then it shows the hp logo and then after a little while it shows a message monitor is going to sleep and then it restart itslearning till i turn it off
can anyone pls help me with this problem i didnt find anytime on the internet
already thanks for helping

Hello @i__need_help,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your computer automatically enters sleep mode before it can boot into Windows, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend booting your computer using Windows 7 Safe Mode to change the power management settings.
If you are able to successfully boot into Windows, please follow the steps below to restore the default schemes on your system:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg -restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I have a Rocketfish mini display port to VGA adaptor cord for a macbook pro, it was working fine the first week, now it does not show what I am seeing on my laptop on my lg Flat screen tv. It only shows the space background but not any icons. Any help??

Is there anything I should do to the TV or any settings i should do from my actual Macbook? It only shows the space background but not any of my icons or what i am seeing on my laptop screen. It is a new adaptor which was purchased last week.

It seems as though though it may be a connection issue, possibly hardware or adapter. Make certain the connections are TIGHT.
For software you may try a smc reset:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Try a pram reset:
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
If no joy you can take it in to an Apple store genius bar for a free evaluation make an appointment first.
http://www.apple.com/retail/geniusbar/

I have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows

i have iphone 5s which when i connect to import the pictures directly to my windows computer. a folder by the name of my phone appears in "My Computer" . when i open it, it shows the storage information and one icon to click on. when opened it shows a couple of folders to click upon to view pictures. when i open the pictures folder and delete all the pictures , even then a lots of unclickable windows icons remain
i have attached the picture of that window's screenshot. plus when ever i try deleting them it says,
please help!.. i shall be really thankful.
iPhone 5s, iOS 8

I have the same issue and it has to do with iOS 8.2
Apple, please mend this ASAP. Really stupid change since iOS 8.1
If you for some reason must have many different folder make sure that you put the newst photo in the last folder so one can easily find a photo when I don't want to copy all photos to, let' say, my friend computer.

My little brother messed up with my iPod touch 4th Gen by entering the wrong password , now all data is beeing erased what should I do.The iPod is just showing the Apple Logo and some buffering icon below it.Need help fast!I'm really worried!

I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
It re booted several times till now.
Need help fast!

- I suspect that he went to Settings>General>Reset>Erase all content and settings. For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
Try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The connect to computer and try to restore via iTunes.
- Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
- If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
iPhone and iPod touch: Unable to update or restore

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section.

Using the Mail content and Mail Attachment in the mapping

Hi,
I have a requirement in which I need to read a file from the mail server and I am using the sender mail adapter for this. I have to convert the attachment of the mail in to the payload. To do this I am using the payload swap bean and mail transform bean. Now the issue is I have to get the information from both attachment and the mail content and need to map it to the target message. Please let me know how to do this.
Thanks!
~Vaas

Not sure if there is a staright forward way to achieve this.
But I can think of a work around for your scenario.
>>To do this I am using the payload swap bean and mail transform bean.
Instead of doing it this way, try
1. Message Transform bean that will transform the payload(content of the mail) to XML.
2. PayloadSwapBean to switch Payload and Attachment.
3. Message Transform bean to transform the attachment to XML.
4. Custom adapter module to read the attachment, contnet and create your own desired XML.
Alternatively, step 4 could be replaced by a Java mapping doing the same operation.
Regards
Jai

Strange issue in ListBox - Showing the 'id' contents and not from 'Values'.

Similar Messages

Maybe you are looking for