Strange LAV applications open in mass when using after effects? + other

Hey guys, when i use after effect tones of little LAV Splitters and Decoders open;
How do i get rid of this and what does it affect?
OTHER: also sometimes i when i play back clips in after effect, the clips jumps 5 frames forward then 5 frames back randomly, really anoying and all compostion and clips are 29.97 fps :/ (this usally occurs after , after effects has been opened for a while and move of these LAV icons appear? coinsidence?)
Thanks a lot for your help,
Eggy

- version : CS5.5 update 10.5.1.2
- no recent updates
- Windows 7 64bit service pack 1
- CPU: i7-2600k, 12gb ram, Crossfired radeon HD6870, 2x 1TB internatin HDD
- AMD CCC 13.11
- Third party hardware: Twixtor
- footage recorded with x264vfw - H.264 codec into .AVI file and rendered as H.264
-N/a
-I have been editng for around 5 hours and when i RAM preview my clips the fps jumps back and forth and very unfluid (after having told after effects that the file is 29.97fps and not 25fps) I was thinking this might occure with all the LAV things opening when using after effects..
- yes quicktime is installed 7.6.2
- other software running: google chrome
-Twixtor effects installed
- not using openGL
-The problem only occures when i RAM preview, i tried rendering and the clips was fine, but i cant edit with constant fps jumps backwards and forwards.
VIDEO EXAMPLE:
in preview RAM as it goes up the stairs and around the corner it jumps a lot of frame for some reason, i also showed the orignal clip just to show that it is smooth.

Similar Messages

  • Is there a way to force GPU acceleration when using After Effects template project?

    I am using the template feature in after effects to create most of my text in a timeline, for about five minutes of text I am sitting on a half hour render. There are two Quadro K4000 GPUs that are spiking at around 8%. Does any one know of a way to force premiere to utilize the GPUs more fully?

    If the After Effects comp is in the timeline, Premiere Pro does the render. At least that's what I'm seeing. Even if the comp is first rendered in After Effects, putting it in the Pr timeline gives the red line. I don't know why you are seeing such long render times just for text -- seems odd. I tried it for a five-minute text comp on Win 7 and it took about 15 seconds, and only used the CPU.
    I remembered seeing a way to tweak the nvidia card to use it more efficiently. Never tried it but here is the link in case you want to explore. The Quadro K4000 is on the list there. Let us know if it helps at all.
    http://www.studio1productions.com/Articles/PremiereCS5-2.htm

  • Why am i getting a BSOD when using after effects "CC Wide Time"

    If I preview my footage whilst using the "cc wide time" effect, my PC Crashes to a blue screen of death. 
    I'm using CS6 Creative cloud, any suggestions?
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7601.2.1.0.256.48
      Locale ID:    2057
    Additional information about the problem:
      BCCode:    124
      BCP1:    0000000000000000
      BCP2:    FFFFFA8007520028
      BCP3:    00000000B4002000
      BCP4:    0000000036000135
      OS Version:    6_1_7601
      Service Pack:    1_0
      Product:    256_1

    Which application are you using to preview, Premiere Pro?

  • Which mac is best when using after effects and video editing?

    i'm looking to get a new mac to do video edititng and adobe after effects.  What should i get?  A mac book pro, imac?

    I'd get a MacPro with a lot of RAM. This gives me a platform I can expand through third party video i/o cards,esata cards for external RAID boxes, extra internal drives, multiple monitors, etc and will have the longest useable life span.
    Your mileage will vary.
    What it comes down to is ... Best is a subjective concept.
    Best at what?
    Absolute speed? Flexibility? Expandability? Life cycle costs? Low cost of entry? or ???
    Define your needs, long term plans and budget more closely and what machine to purchase will become obvious.
    x

  • Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

    Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

    1. You have allowed Apple to auto-upgrade your Mac
    Turn off auto-update here:
    Menu > Apple > System Preferences > App Store
    2. The Icons on your dock are Aliases not real apps
    They point to where the apps really are which is:
    For Pages 5.2.2 in your Applications folder
    For Pages '09 in your Applications/iWork folder
    3. You are alternately opening documents randomly with either version of Pages
    Both Pages have the same file extension .pages and there is no certainty as to which version opens them when you double click on a file.
    right click on the file and choose which version you want to open it
    4. Pages '09 can not open Pages 5 files
    Pages 5 can not open Pages '08 files, and will convert and change Pages '09 and Word files.
    It will also auto save opened files into its own format.
    You can export these back to Pages '09 if you need to:
    Menu > File > Export > Pages '09
    5. Yes Pages 5.2.2 is a marked downgrade
    Pages 5.2.2 has a few improvements but has had over 110 features removed and is buggy.
    Sooner or later you will not be able to open a file or have it damaged in some way and it has a complex obscure file format largely incompatible with everything else, so you will not be able to rescue the contents of your file. If Pages or some third party server/eMail don't trash your file, eventually Apple will do it for you as it did when it released Pages 5 last September. I recommend using Pages '09 for the time being whilst you look for viable alternatives, some are here already and some are on the way.
    For further information about what has happened:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=0882463378700 abf43a0f2433506bbbc&mforum=iworktipsntrick
    Peter

  • My Application gets Error 37 when using Serial Port VIs.

    My Application works fine developed with LV 6.1. Then I updated to LV 7.1 and now the Executable of my application gets error 37 when using the old serial port functions. The "serpdrv" file is located in the application directory and is from 02/2002. The application runs well in the development environment after I placed the "serpdrv" file in the LabView directory. I tried to put a line with "serialDevices=..." in the .ini-file of my application but this did not cause an improvement. I also tried to rebuild the EXE with this line in the "labview.ini" file but nothing changes.
    Does anybody have another idea ?
    Many thanks for help
    Thomas

    >Did you actually replace the old serial functions that come with 7.1 with the functions from 6.1?
    Yes. E.g. "open serial driver.vi" uses "open device" with "serpdrv" as device string.
    I had the same problem running my application as VI´s. After the copy of serpdrv into the LV 7.1 directory everything works fine.
    I don´t understand why the application running as a .exe doesn´t find the serpdrv when it is in the same directory....
    Nevertheless many thanks for your answer
    Thomas

  • Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

    Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
    Specs;
    Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
    Processor - Intel Core i7 Processor - i7-3820 LGA 2011
    Processor fan - Intel Thermal Solution RTS2011 AC
    RAM - Ballistix by Crucial - 2x  8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
    SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
    HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
    Power Supply - Cooler Master Extreme Power Plus 700W
    Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
    Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
    I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
    I have, as far as software goes...
    Windows 7 64-bit SP1
    Adobe Creative Suite 5, student version or what have you.
         - I do have several plugins installed as well for After Effects only.
    Autodesk 3ds Max 2012
         -I have several maxscripts as well as a couple plugins for 3ds Max.
    UDK 2-2012 & 3-2012
    NVIDIA PhysX Lab 1.1
    NVIDIA Texture Tools 2
    NVIDIA plugin for Photoshop
    xNormal
    ConTEXT
    UnCodeX
    Quicktime
    AVG Free
    Malwarebytes
    7-Zip
    Java
    Sculptris
    As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
    note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
    Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
    Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
    note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
    note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

    Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
    The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
    "Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
    With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
    Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
    And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
    Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

  • MacBook Pro freezes when using any app other than the web browser.

    My MacBook freezes when using any app other than the web browser. I can open up Google Chrome and use it all day with no problem, but if I minimize it and try to browse through photos in my picture folder or do anything that involves the Finder, the computer just freezes up and I get the rainbow wheel. If I put in a CD to play it, the computer freezes with the rainbow wheel. Any suggestions? I would like to use the mac for more things than the internet.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

    i have the current Mac Pro the entry level with the default configuration   and i feel lack of  performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

    256GB SSD  it shipped with will run low and one of the things to watch.
    Default memory is 12GB  also something to think about.
    D500 and FCP-X 10.1+
    http://macperformanceguide.com/index_topics.html#MacPro2013Performance
    Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

  • HT204380 When using FaceTime can other devices on my account see my call?

    When using FaceTime can other devices on my account see my call?

    No. However, you'll save yourself a lot of annoyance if each device has its own Apple ID for FaceTime/iMessage.

  • When using FaceTime, all other sounds are muted. This defeats functionality. When will this be corrected?

    When using FaceTime, all other sounds are muted. This defeats functionality. When will this be corrected? Does anyone know of a "fix" for this problem? This definately is NOT a feature.

    yes, that is exactly what mine did too. I noticed that something is wrong after receiving calls and did not hear anything.
    It was like the IPhone did not realize that the headphone is not any longer plugged in. I m not sure weather I plugged/unplugged the headphones after this more than once but it startet working correctly.

  • When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

    When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?

    I tried to give you this solution before, but maybe you missed it. This simple procedure will mask out all the various sponge edge-artifacts. Here it is in simple steps:
    1. Make the path shape you want to apply the sponge effect to.
    2. Highlight that path, and select Object > Path > Offset path ... choose +2 points (or whatever works for your drawing scale, to ultimately eliminate the outside line and the artifacts) -- this will make a slightly larger shape, based on the original shape.
    3. Cut the outside path (command or alt-X), select the inside path, and paste the outer path BEHIND the inner path (command or alt-B).
    4. Apply the sponge effect to the OUTER path.
    5. Highlight BOTH paths, and create a MASK (command or alt-7).
    Now you have your original shape, with sponge applied, and the outer 2 points (or whatever your Offset Path was set to), are masked out, masking out the outside line and the sponge artifacts.
    This works with any Document Raster Effect Settings dpi.

  • I have created some movies using After Effects but can't open them now because I get the following message:

    I have created some movies using After Effects but can't open them now because I get the following message:
    Ray-tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later. For now, ray-tracing will use the GPU.
    After installing CUDA 5.0 or later, restart your computer.
    For more information see: http//www.adobe.com/go/aeraytracedgpu
    HELP. I have a project that needs to be delivered.

    The alert message is just telling you that a specific feature won't use the GPU. This message is innocuous. It only means that the processing of one specific, obsolete feature will use the CPU, not the GPU.
    Are you saying that After Effects won't start or open your project?

  • How do I open and use after effects on my desktop?

    I have downloaded everything from creative cloud, but now how do I open the free trial and use after effects cc on my desktop? There is no obvious button that says open or icon to choose (that I can see)
    Please this would be really helpful i you could tell me how.
    Thank you!

    1st, do you have the 64bit computer required for After Effects?
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Decompressing video files using After effects

    Hello!!
    I have a SONY Full HD camcorder that records in an AVCHD format.
    So when I import my clips into my computer's hard drive, they are compressed. That meens that I have to decompress them in order to work with the best quality.
    So, I use After Effects to export the AVCHD clips totaly uncompressed (I export them into none compressed Quicktime files). Then I re-import the uncompressed Quicktime clips into After Effects and start working with them, adding effects, color correction and so on. When I finish, I export them again totally uncompressed, in order to import them to Premiere for the final editting. I do that because I do not own an Adobe production suite so that to use Adobe Link for transfering files from After Effects to Premiere.
    I decompress all my AVCHD clips because I won't need to apply effects to all of them, so some will go straight to Premiere without passing through After effects, since there is no need. So they must be decompressed.
    I have noticed that when I decompressed an AVCHD clip, it got 578 GB from 84GB. So when I re-imported the uncompressed 578 GB clip in After Effects and added some effects and color correction, the final clip got out 392GB, although I chose the uncompressed settings and although I added effects. Normally it should be more than 578 GB.
    Would you happen to know why is that?
    Do you have any other suggestion of how should I decompress my camcorder clips? I have Quicktime but I cannot play AVCHD files, since it is an unsupported format for Quicktime.
    Thank you!!
    Giannis

    After Effects and added some effects and color correction, the final clip got out 392GB, although I chose the uncompressed settings and although I added effects. Normally it should be more than 578 GB.
    The default QT output uses the Animation CoDec, which is a visually lossless compression. No problem here and I think you are overdoing. There is nothing wrong with converting files e.g. to LZW compressed TIFFs, PNG or EXR files, all formats producing much smaller file sizes than QT files and without losing any info...
    Mylenium

Maybe you are looking for