Strange letter adjustment

sorry for my basic-english.
I´d like to create a text-site with three columns. After I let the text flowing in, some of the letters are not at their place, where they normaly have to be. Some of them "jump over" into the column at the right side and mix together with the other letters.See picture below:
When I try to delete these faulty letters, it happens again, with other ones. I hope I exlained clearly enough...
Did enybody had this problem as well?

Here comes the screenshot with invisible characters:
It´s very "funny": when I delete the whole paragraph and write it new by the hand, the same problem happens. Also I tried to save the text not-formatted with the simple Editor an imported it in InDesign: same thing! always with those letters. It must be a local problem there.

Similar Messages

  • Strange letter

    We sended a PDF to a printing house.
    When we got to documents back we saw in this document was a very strange letter J.
    The printinghouse says that this has to do with the way we save PDF's.
    Can anyone help me

    It is the letter J what is another fonts. We save a MS word file as PDF.
    And when we print the letter then there is no problem with the letter J, but when we send it to the printinghouse they get that strange font for the letter J.
    See picture:

  • Strange letter spacing from AppleWorks

    I am getting strange letter spacing with some fonts from AppleWorks. There is more space between some letters than others—some letters are almost touching each other, while there is a gap between others, creating an ugly appearance. I printed out the same text in the same font from TextEdit and it looked beautiful. The problem is not confined to just one font or document. I thought I had the latest version of AppleWorks,which is 6.2.4. I have a Brother HL-5250DN laser printer.

    AppleWorks 6 is really an OS 9 application carbonized (quickly) to run in OS X & it has never been coded to take advantage of most of the "bells & whistles" of OS X, such as font display. TextEdit is a cocoa application - OS X only. The problem you're seeing may be fixed by turning Fractional Character Widths in Preferences > General… > Topic: Text on (or off if it's on). Some users like the system hack, Silk. You can find it with a search on MacUpdate or VersionTracker.
    The last version of AppleWorks is 6.2.9, released in January, 2004. Here at the links I have for the 6.2.9 updater. The first has a link to the North American updater in the upper right & links to other languages further down.
    North American/US
    International/UK
    French
    German

  • Letter spacing wrong when generting pdf in web service

    I have a turnkey JBoss Installation on a Windows Server 2008 R2 Standard.
    When I create a pdf document out of an doc (Office 2003 SP3) or docx (Word 2007 SP2)
    with the web services I get wrong letter spacing. If I simply create a pdf out of Microsoft Word with the
    installed Adobe Add-On on the same server the spacing is correct.
    There is no error or warning in all the log files.
    I tried already all kind of settings in the font settings, but no success.
    You can see the differences in the attachment.
    Any help would be appreciated.
    Answer: I tested a lot by myself and finally it worked. I am still not 100% sure why, but I think it is the following:
    When you have configured the turnkey installation, everything is up and running afterwards. But then you have these strange letter spacings.
    When you restart the jboss service (Windows) then it is correct afterwards.
    Message was edited by: Markus Ebel

    > Yeah, Motter Corpus is pretty distinctive. If you got a font substitution you'd know.
    But would you know if the font was not embedded (other than by looking at the file properties) when viewing on a system where it is installed?
    It looks to me as if the spacing issue is confined to the headings. Is that right? Have you previewed the page with custom tracking and kerning highlighted in ID (you'll find those settings in the preferences under Composition)? On screen shot the spacing looks very even so that's what I'd check first.
    What does the ID file look like for those same pages?
    Peter

  • Highlight Slider acting strangely in LR4.2

    I have a situation where negative highlight slider acts opposite of what one expects, i.e. it pushes the histogram to the right.  It jumps when I move the slider left of the 0 position.  If I continue to move it to the left it slowing brings down the highlights, but not as I have experience it in the past.  See the screen shots below.
    Using Windows 7 64 bit.  Same behavior on to different computers.
    It may have something to do with the whites slider being pushed far to the right, but I have used this technique on many photos in the past, and I have never experienced this starnge behavior.

    I see this sort of thing too from time to time.
    And, you don't necessarily have to have non-zero whites or blacks to see the strangeness when adjusting highlights or shadows.
    I wonder if your red channel is extending further in reality than it appears to in the histogram. Consider checking with soft-proofing on, and/or post link to raw.
    I think it's some kind of interaction thing between sliders / zones, but I never understood it.
    Like maybe when you reduce highlights, it changes computation for whites and rolloff...

  • Database open but no processes?   Ghost instance?

    10.2.0.3.0 RH 5
    customer had been doing some SAN work and caused a database problem, listener wouldnt start. Got called to look at it.
    ok, lsnrctl status shows its up, I logged into database as sysdba query v$instance, all open and good.
    SQL> select * from v$instance;
    INSTANCE_NUMBER INSTANCE_NAME
    HOST_NAME
    VERSION           STARTUP_T STATUS       PAR    THREAD# ARCHIVE LOG_SWITCH_WAIT
    LOGINS     SHU DATABASE_STATUS   INSTANCE_ROLE      ACTIVE_ST BLO
                  1 DWH01
    DWHBOX
    10.2.0.3.0        08-MAY-12 OPEN         NO           1 STOPPED
    ALLOWED    NO  ACTIVE            PRIMARY_INSTANCE   NORMAL    NO
    SQL>ok, whats the problem? user cant login with a TNS 12530 error, thats strange lets look at the alert log, (this is a test datawarehouse instance with no arc log mode) ... nothing in it since last night some time.
    ok, lets see what oracle processes are running. whats that? No oracle processes!
    >
    [root@DWHBOX ~]# ps -ef | grep pmon
    [root@DWHBOX ~]#
    >
    no, that cant be right, I just logged on to the database, lets have a look at all oracle processes
    >
    ps -ef | grep ora
    root 5067 4933 0 14:45 pts/4 00:00:00 su - oracle
    oracle 5068 5067 0 14:45 pts/4 00:00:00 -bash
    oracle 5090 5068 0 14:46 pts/4 00:00:00 sqlplus as sysdba
    oracle 5091 5090 0 14:46 ? 00:00:00 oracleDWH01 (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
    root 5113 3065 0 14:46 pts/3 00:00:00 grep ora
    root 15237 3823 0 Apr27 ? 00:00:04 sshd: oracle [priv]
    oracle 15281 15237 0 Apr27 ? 00:00:06 sshd: oracle@pts/0
    oracle 15282 15281 0 Apr27 pts/0 00:00:00 -bash
    [root@DWHBOX ~]#
    >
    woooh, hold on, NO oracle processes at all except for the listener. I must have a typo, stop the listener and do an lsof | grep oracle to see what open files there are, if I can query v$instance then at least the controlfile must be open. (sits on /u01)
    >
    [root@DWHBOX ~]# lsof | grep oracle
    [root@DWHBOX ~]#
    >
    nothing! I now officially have a ghost database. /shudder/
    I know, lets go look at the v$process
    >
    oracle@DWHBOX ~]$ sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.3.0 - Production on Tue May 8 14:46:04 2012
    Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
    Connected to:
    Oracle Database 10g Release 10.2.0.3.0 - Production
    SQL>
    SQL>
    SQL> desc v$process
    Name Null? Type
    ADDR RAW(4)
    PID NUMBER
    SPID VARCHAR2(12)
    USERNAME VARCHAR2(15)
    SERIAL# NUMBER
    TERMINAL VARCHAR2(30)
    PROGRAM VARCHAR2(48)
    TRACEID VARCHAR2(255)
    BACKGROUND VARCHAR2(1)
    LATCHWAIT VARCHAR2(8)
    LATCHSPIN VARCHAR2(8)
    PGA_USED_MEM NUMBER
    PGA_ALLOC_MEM NUMBER
    PGA_FREEABLE_MEM NUMBER
    PGA_MAX_MEM NUMBER
    SQL> select addr, program from v$process;
    ADDR PROGRAM
    7F2B2758 PSEUDO
    7F2B2D10 oracle@DWHBOX (PMON)
    7F2B32C8 oracle@DWHBOX (PSP0)
    7F2B3880 oracle@DWHBOX (MMAN)
    7F2B3E38 oracle@DWHBOX (DBW0)
    7F2B43F0 oracle@DWHBOX (LGWR)
    7F2B49A8 oracle@DWHBOX (CKPT)
    7F2B4F60 oracle@DWHBOX (SMON)
    7F2B5518 oracle@DWHBOX (RECO)
    7F2B5AD0 oracle@DWHBOX (CJQ0)
    7F2B6088 oracle@DWHBOX (MMON)
    ADDR PROGRAM
    7F2B6640 oracle@DWHBOX (MMNL)
    7F2B6BF8 oracle@DWHBOX (D000)
    7F2B71B0 oracle@DWHBOX (S000)
    7F2B7768 oracle@DWHBOX (q000)
    7F2B7D20 oracle@DWHBOX (QMNC)
    7F2B82D8 oracle@DWHBOX (q001)
    7F2B8890 oracle@DWHBOX (J000)
    7F2B8E48 oracle@DWHBOX (TNS V1-V3)
    >
    theres the pmon, lets get the PID of pmon and track that down on the OS
    >
    SQL> select pid, program from v$process;
    select pid, program from v$process
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    SQL>
    >
    Ouch, so trying to get the OS PID crashed my session, lets disconnect, sqlplus back in, but now Im on a dead database, so it looks like trying to query the PID killed whatever ghost instance was there
    >
    SQL> exit
    Disconnected from Oracle Database 10g Release 10.2.0.3.0 - Production
    [oracle@DWHBOX ~]$ sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.3.0 - Production on Tue May 8 14:47:35 2012
    Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
    Connected to an idle instance.
    SQL>
    >
    startup as normal and we're open for business and pmon an all other processes are up.
    Can anyone explain that?
    Edited by: deebee_eh on May 8, 2012 3:31 PM
    Corrected typo: ora 12530 was the original error reported, not 12503.

    nothing in the alert. no traces, dumps, nothing. A switch last night Mon May 7 22:10:05 2012, and the PID kill from that SQL session with error 472 which I know is something external killing the instance. Im not too bothered by this though, Ive never EVER seen an instance be open with out the corresponding OS processes
    Thread 1 advanced to log sequence 71
      Current log# 1 seq# 71 mem# 0: /u01/app/datafiles/DWH01/redo01.log
    Sun May  6 07:25:55 2012
    Thread 1 advanced to log sequence 72
      Current log# 2 seq# 72 mem# 0: /u01/app/datafiles/DWH01/redo02.log
    Mon May  7 17:00:58 2012
    Thread 1 advanced to log sequence 73
      Current log# 3 seq# 73 mem# 0: /u01/app/datafiles/DWH01/redo03.log
    Mon May  7 22:10:05 2012
    Thread 1 advanced to log sequence 74
      Current log# 1 seq# 74 mem# 0: /u01/app/datafiles/DWH01/redo01.log
    Tue May  8 14:47:22 2012
    USER: terminating instance due to error 472
    Instance terminated by USER, pid = 5091
    Tue May  8 14:48:14 2012
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0

  • Tracking problem with Bluetooth mouse..

    I recently changed batteries in my Bluetooth wireless mouse... I've done that many times in the past without incident... But this time something strange happened... I used to run the tracking speed setting at the second notch up from slow but now that is lightning fast. Even the next setting down, the first notch up from slow, is too fast... And the slowest setting is ironically too slow which means if I try to move the mouse across the screen at what I would consider a normal speed, the mouse jumps back left as I move right, meaning I am overwhelming the control system... The point is something changed and I can't imagine what... These new batteries are now down a notch from top power meaning they are not new anymore but still the lowest notch is too slow and the next one up is too fast... My real question is what could have changed?? I am running 10.4.6 and I don't believe I had changed anything other than the batteries from before to after the problem started... Any thoughts???? thanks... bob..

    Today I received a letter from Apple, a very strange letter that had no heading or address and didn't say "Apple", all it had was the Apple logo. But from the postmark on the envelope I could see it was posted in Cork, Ireland.
    The letter confirmed that they had received my proof of purchase and that they would arrange for me to be send a replacement.
    The letter said they had tried to call me but could not get through. This is FALSE. Anyone who ever calls me can always get through (although at times, they may get my voicemail). Nobody from Apple left any messages on my voicemail.
    The letter gave me a Case Number and said to call their "Technical Support Team".
    When I called the number they gave 0870 8760753 I was offered a number of options, NONE OF WHICH covered my reason for calling, so I chose the seemingly nearest option to it.
    I found myself talking to something with an Indian accent so thick and heavy that I could barely understand him, and I am used to Indian accents.
    He seemed very tired or sleepy; certainly on taking my call he seemed to be settling himself in for some kind of long haul.
    Very slowly and hesitantly he started asking me for all kinds of details about me. As I gave him each piece of information he asked me for, he kept interrupting during the process that that I had to repeat myself several times. I had to interrupt him to tell him I had a Case Number (he had not asked me for one).
    He took my Case Number , and paused for a long time, then said "well....Mr. -, this is about a Bluetooth Mouse, yes?"
    Brilliant.
    He seemed to think the pair of us were going to spend a long time negotiating about something.
    He said he would need to go and speak to his supervisor. I waited on the line for 10 (repeat TEN) minutes.
    He came back "Well, Mr. -....I need to check all your details".. including all my credit card details....very slowly and repeating everything twice.
    Several exasperating minutes later I THINK I had convinced him that he had all my details and that he needed to have a new mouse sent to me.
    He said that when the new mouse comes (THINKS...if it comes) via UPS, I must send the dead one back to them within 10 days or they will charge me for the new one. I said what happens if I don't (because this is the summer and I might be out of the country on holiday).
    "That is the procedure".
    I replied "so you have all the information you need now and you are going to send me the mouse, yes?"
    "yes".
    ---long silence---
    I said "IS that the end of the telephone conversation?"
    "yes."
    "OK thanks, goodbye"-
    MORAL OF THIS STORY:
    If you buy an Apple wireless mouse and it dies on you, consider if you really badly need to have it replaced by Apple. HOw much time do you have to waste?

  • RCA - Read Permission

    Hi,
    I'm trying to assign the necessary Root Cause Analysis roles for read access to a user. But without
    success:
    I assigned the following roles to the user:
    - SAP_RCA_DISP
    - SAP_RCA_EXE
    - SAP_SMWORK_BASIC
    - SAP_SMWORK_DIAG
    - SAP_BI_E2E
    But the user can't select any systems in the RCA Workcenter and the Button (Workload Analysis, Change Analysis,...)
    are not correct displayed. There are strange letter chains visible.
    Has someone an idea how to fix this issue?
    Thanks in advance,
    Joern .

    Hello,
    Permission issues always cause the buttons not to show up, never a string of chars...
    A "strange letter chains visible" is not common. I suspect that your stack is not consistent. The workload analysis
    page is ABAP Based, Webdynpro ABAP. Please check if your components are according to note 1274287. In solman_setup, do a pre-requisite check to see if there's any warning regarding your stack.
    Best regards,
    Guilherme

  • Tether problems in Aperture 3 with D3x & D3s - No HUD + other issues.

    Running Aperture 3 with 10.6.2 on a fast MacPro.
    I'm able to tether with both D3x and D3s, but the Tether HUD does not show up.
    Tried all the usual, cables, restarts, 64bit vs. 32bit, etc. Nothing. Still useable, but nice to have the HUD.
    Also, something I was REALLY hoping for in A3, but very disappointed not to see: I often shoot in RAW+JPEG in the studio. JPEG to give me B&W images that could even be used for finals if they are just right, and the RAW as backup in case I don't like the cameras' B&W conversion, or decide to use color.
    The new A3 IMPORT features for RAW+JPEG are great, but when I tether, it usually shows the RAW right away, and then sometime later the JPEG shows up. Usually. Not all the time. If it doesnt show up, and I take another shot, the previous JPEG shows up, followed by the next RAW !
    Would be great if there was a way to tell Aperture to ONLY show me the JPEG. Alas...

    Using a track to place the pins automatically works fine - within the limitations of Aperture 3 just using minutes and hours and not seconds to place pins.
    Moving an automatically placed pin to a different place on the track and letting adjust Aperture the other pins moves them to the next pin location previously used by Aperture and not by the same time offset of the manually moved pin.
    Images associated with pin on location 1 get moved to pin of location 2… At least this is what happened the one time I tried that feature.
    On top of that Aperture uses some dumb smart filtering and every of the locations require to deselect that filter in the search field of the browser. I guess that's the reason why you get missing images, they just got filtered out from display.

  • Cannot Daisy Chain My External Hard Drives on Macbook Pro Unibody

    I have a 2010 Macbook Pro 13.3.  I am trying to daisy chain my 2 external hard drive enclosures to my firewire 800 port.  The enclosures are manufactured by Vantec, model Nextar 3.  Both devices have 2 firewire 400/800 ports and they advertise that they are able to be daisy chained.
    My issue is:  I hook one to the other and power them both on and nothing seems to happen.  I can power one up and the drive will show up on my desktop, but when I power the second drive up, I get the pop up screen saying I have disconnected my device without properly shutting it down, and then the drive is gone.  I have tried connecting them several different ways.  Im not sure if its the external enclosures, if there is a process I'm supposed to follow, of if the Macbook Pro Unibody does not support daisy chaining firewire 800 devices.
    Please, if anybody has had the same experience and has been able to fix it, let me know.  I am in need of some serious hard drive spance and am going to return both enclosures if I cannot get them to work.
    Thank you.

    I'm having the same issue.
    I'v also found that I am able to daisy chain other drives throught the vantec drives.
    And that, when  I get the pop up screen saying I have disconnected my device without properly shutting it down, and the drive is gone. I'm only able to remount the drive after restarting the computer while the drive is conected and powered. It won't apear on other computers untill the reboot sequence is preformed.
    Strange,
    Let me knwo if you've found a solution.
    thanks,
    joe

  • Banned from iTunes (but we're not telling you why) - say what?

    i've used iTunes for years, without mishap.  two weeks ago when I tried to buy a TV series I got the following error message: "Your purchase could not be completed, for assistance contact iTunes support at - etc".  emailed iTunes support, got a quick response, person said she'd looked into the account, tweaked something and I was good to go.  shortly thereafter i tried to buy a different TV episode, same error message.  A bit peeved, I emailed the nice lady who said she'd fixed my iTunes problem, she got back to me quickly, said she'd looked at the account, tweaked something and all was well.  today i tried to buy a book from iTunes - same error message.  emailed iTunes support again. 
    this time i got a different response.  part of the response follows:
    I have taken a look into your account, and after consulting with a specialized department that deals with these types of errors, we have determined that your iTunes Store account “[email protected]” has been used in a manner that is in violation of the Terms of Use for the iTunes Store. 
    I am so sorry for the inconvenience with this, but we are unable to disclose the exact area within which your account was not in accordance with the Terms and Conditions. You can most definitely review the terms on your own by checking the following link:
    http://www.apple.com/legal/itunes/us/sales.html
    Please note that you will still be able to play, authorize, and sync all of the items that were purchased using this account. You may not be able to receive new updates however, for any of your previously purchased content.
    So,  iTunes has determined that i've done something really awful, so awful that i've been banned (for life???) from downloading iTunes content, and apparantly so awful they won't tell me what they think i've done wrong. 
    I am dumbfounded by this.  i don't know if someone else used my account, but since iTunes support refuses to give me any reason for the ban, i am stumped.
    has anyone else dealt with a similar problem?  what recourse do i have?  after receiving the email noted above asking for more details i got a response that simply restated that they would not tell me anything about my situation and again suggested i review the terms at the link.

    Hi townsendrand - did you manage to resolve this problem?
    I have exactly the same issue. Tried to purchase Winnie the Pooh audio book for my daughter.
    Strange error messages in itunes store and then when I wrote to Apple received the same letter as you.
    Very strange letter, which seems to have been cut and pasted by a bot as it is has several errors. Not what I expect from Apple. It seems as though my account is unable to make purchases or update purchases I already made all because of something that they will not disclose. "We are unable to comment on the exact area within which your account was not in accordance with the Terms and Conditions." Then it refers me to the terms and conditions - as though that is going to help?? Doesn't seem to be anything wrong with the card. My many Mac and OS devices have never been unlocked, hacked or interfered with. My itunes account is activated on 4 machines. I can't think of any violations to their terms and conditions. Doesn't the interface mitigate against attempted violations anyway?  
    Doesn't Apple want to be my friend?
    Meanwhile no Winnie the Pooh.

  • Insert statement executes before If statements

    Hello All,
    I am trying to validate few fields before inserting them into table.
    for example:
    IF params('txtID') IS NULL THEN
    "SOME MSG";
    ELSIF params('txtName') IS NULL THEN
    "SOME MSG";
    END IF;
    INSERT INTO TABLE T1
    VALUES(params('txtID'),params('txtName');
    What I want to do is : I want to validate two fields before inserting.
    Can anyone help me?
    Thank you,
    H.

    It directly executes insert statement. If I delete insert, it executes that IF statement.
    It is strange.Let's be clear about this, it is not strange. Your original IF statements did execute before the INSERT but they did not raise an exception. Consequently the INSERT statement was processed. Your "SOME MSG" mechanism is obviously only triggered after the procedure completed. Walter's solution worked for you because it raise exceptions, which prevented the INSERT statement from executing.
    Anyway, it is obvious that you haven't got NOT NULL enforced on your table, which is A Bad Thing. You shoudn't be enforcing such constraints through a procedure.
    Cheers, APC
    blog: http://radiofreetooting.blogspot.com
    Edited by: APC on Feb 3, 2009 5:48 PM
    Only because the OP edited their final post, and removed the lines I quoted.

  • Lost SIM Card Overseas

    Does anyone know how to reach Verizon Wireless when you're overseas and lost your SIM card? I have been trying to reach them thru their website auto form for more than a week with no response except to please call them, which I cannot do since I have no SIM card!!!!! This has been ruining my trip and super frustrating. I'm on a borrowed computer now for a few minutes and their live chat isn't even available. 

    Hi, I have been working at the Olympics in Sochi and dealing with this issue for 13 days now with no assistance from Verizon. I live in a hostel-type building. I  have no access to any kind of phone and limited Internet access on my cell phone using a Russian SIM card. None of your options work in my circumstance, which I've reported previously. I can only communicate thru email or by phone IF you call me. The three times I contacted Verizon thru auto form and discussion board online were thanks to a stranger letting me use their laptop. - Kimberly
    >>Personal information removed to comply with the Verizon Wireless Terms of Service<<
    Message was edited by: Verizon Moderator

  • Problem during restore macbook pro

    during restore and downloading additional components..  it retunes to the main page for restoring and backup with no messages or something..  what should I do what is the problem or solution to finish restoring and use my macbook pro?

    You installed the Flashback trojan. For current discussion, see these threads:
    The button labels in my folders are...: Apple Support Communities
    Finder shows strange letter and number...: Apple Support Communities

  • Documents with individual permissions reinheriting permissions after check in

    I have a folder within a SharePoint 2010 document library, with several excel spreadsheets within it.  The excel spreadsheets all have individual permissions on them.  Check-out is inforced on the library.  A user then checks-out their
    spreadsheet, amends it and checks it back in.  The spreadsheet then loses it individual permissions and reinherits the permissions from the folder above.  Does anyone know how to prevent this from happening?  As we need to keep the individual
    permissions.

    looks strange. let us know some more details.
    1. check the workflow if any associated
    2. Check the is that document library created based on custom template
    3. Upload a document to the library and break the permission. now check-out--> do some modification to the document--> save it-> check-in the document. Now check whether the permission remains or reinherited from parent
    4. check if ant event receiver associated with content type if custom content type used.
    Hope this will help you
    Senthilrajan Kaliyaperumal

Maybe you are looking for